Luminescent copper indium sulfide (CIS) quantum dots for bioimaging applications.

Copper indium sulfide (CIS) quantum dots are ideal for bioimaging applications, by being characterized by high molar absorption coefficients throughout the entire visible spectrum, high photoluminescence quantum yield, high tolerance to the presence of lattice defects, emission tunability from the red to the near-infrared spectral region by changing their dimensions and composition, and long lifetimes (hundreds of nanoseconds) enabling time-gated detection to increase signal-to-noise ratio. The present review collects: (i) the most common procedures used to synthesize stable CIS QDs and the possible strategies to enhance their colloidal stability in aqueous environment, a property needed for bioimaging applications; (ii) their photophysical properties and parameters that affect the energy and brightness of their photoluminescence; (iii) toxicity and bioimaging applications of CIS QDs, including tumor targeting, time-gated detection and multimodal imaging, as well as theranostics. Future perspectives are analyzed in view of advantages and potential limitations of CIS QDs compared to most traditional QDs.

Synthesis of near-infrared absorbing triangular Au nanoplates using biomineralisation peptides.

Triangular Au nanoplates (TrAuNPls) possessing strong plasmonic properties can be used as photothermal agents in cancer therapy. However, the controlled preparation of such morphologies typically requires harsh synthetic conditions. Biomolecules offer an alternative route to developing biocompatible synthetic protocols. In particular, peptides offer a novel route for inorganic synthesis under ambient conditions. Herein, using the previously isolated peptide, ASHQWAWKWE, for Au nanoparticle (AuNP) synthesis, the conditions for preparing TrAuNPls via a one-pot synthetic process of mixing HAuCl4 and peptides at room temperature were investigated to effectively obtain particles possessing near-infrared absorbance for non-invasive optical diagnosis and phototherapy. By adjusting the peptide concentration, the size and property of TrAuNPls were controlled under neutral pH conditions. The synthesised particles showed potential as photothermal therapeutic agents in vitro. In addition, peptide characterisation using B3 derivatives revealed the importance of the third amino acid histidine in morphological regulation and potential circular Au nanoplates (AuNPl) synthesis with ASEQWAWKWE and ASAQWAWKWE peptides. These findings provide not only an easy and green synthetic method for TrAuNPls and circular AuNPls, but also some insight to help elucidate the regulation of peptide-based nanoparticle synthesis for use in cancer therapy. STATEMENT OF SIGNIFICANCE: Biological molecules have received increasing attention as a vehicle to synthesise inorganic materials with specific properties under ambient conditions; particularly, short peptides have the potential to control the synthesis of nanoscale materials with tailored functions. Here, the application of a previously isolated peptide was assessed in synthesising Au nanoparticles containing decahedral and triangular nanoplates with near-infrared absorbance. The size and absorbance peaks of the triangular nanoplates observed were peptide concentration-dependent. In addition, these fine-tuned triangular nanoplates exhibited potential as a phototherapeutic agent. Moreover, the peptide derivatives indicated the possibility of synthesising circular nanoplates. These findings may offer insight into development of new techniques for synthesising functional nanoparticles having biological applications using non-toxic molecules under mild conditions stituted in the original B3 peptide is underlined.

Peptide-Functionalized Quantum Dots for Rapid Label-Free Sensing of 2,4,6-Trinitrotoluene.

Explosive compounds, such as 2,4,6-trinitrotoluene (TNT), pose a great concern in terms of both global public security and environmental protection. There are estimated to be hundreds of TNT contaminated sites all over the world, which will affect the health of humans, wildlife, and the ecosystem. Clearly, the ability to detect TNT in soils, water supplies, and wastewater is important for environmental studies but also important for security, such as in ports and boarders. However, conventional spectroscopic detection is not practical for on-site sensing because it requires sophisticated equipment and trained personnel. We report a rapid and simple chemical sensor for TNT by using TNT binding peptides which are conjugated to fluorescent CdTe/CdS quantum dots (QDs). QDs were synthesized in the aqueous phase, and the peptide was attached directly to the surface of the QDs by using thiol groups. The fluorescent emission from the QDs was quenched in response to the addition of TNT. The response could even be observed by the naked eye. The limit of detection from fluorescence spectroscopic measurement was estimated to be approximately 375 nM. In addition to the rapid response (within a few seconds), selective detection was demonstrated. We believe this label-free chemical sensor contributes to progress for the on-site explosive sensing.

A bioinspired peptide matrix for the detection of 2,4,6-trinitrotoluene (TNT).

A novel peptide-based three-dimensional probe called "peptide matrix," inspired by the antibody paratope region, was fabricated on a surface plasmon resonance (SPR) sensor chip to enhance the sensitivity of detecting the explosive 2,4,6-trinitrotoluene (TNT). Although peptide aptamer is an attractive candidate for a molecular recognition probe because of its ease of synthesis and chemical stability, it still has difficulty in applying to highly sensitive (i.e. parts-per-billion (ppb) or sub-ppb level) detections. Thus, we developed the concept of peptide matrix structure, which is constructed by consecutive disulfide bond formation between a large number of peptide fragments. This robust three-dimensional structure displays multiple binding sites which can efficiently associate with each TNT molecule. The peptide matrix lowered the dissociation constant (KD) by two orders of magnitude compared to the linear peptide aptamer, estimating KD as 10.1 nM, which is the lowest concentration reported by using peptide-based TNT probe. Furthermore, the concentration limit of detection of peptide matrix modified SPR sensor was 0.62 ppb, and hence comparable to single-chain variable fragment (scFv)-based TNT sensors. To our knowledge, this is the first report demonstrating peptide matrix fabrication and its application for small explosive molecule detection. This peptide matrix-based approach, which has the advantage of simple synthesis and high sensitivity, will be applicable to many other small-molecule label-free detections.

Screening and characterisation of CdTe/CdS quantum dot-binding peptides for material surface functionalisation.

Quantum dots (QDs) are promising nanomaterials due to their unique photophysical properties. For them to be useful in biological applications, the particle surface generally needs to be conjugated to biological molecules, such as antibodies. In this study, we screened CdTe/CdS QD-binding peptides from a phage display library as linkers for simple and bio-friendly QD modification. Among five QD-binding peptide candidates, a series of truncated peptides designed from two high-affinity peptides were subjected to an array-based binding assay with QDs to assess their functional core sequences and characteristics. Linking these isolated, shortened peptides (PWSLNR and SGVYK) with an antibody-binding peptide (NKFRGKYK) created dual-functional peptides that are capable of QD surface functionalisation by antibodies. Consequently, the dual-functional peptides could mediate anti-CD9 antibody functionalisation onto CdTe/CdS QD surface; CD9 protein imaging of cancer cells was also demonstrated. Our proposed peptides offer an effective vehicle for QD surface functionalisation in biological applications.

Quantum dot interactions with and toxicity to Shewanella oneidensis MR-1.

Combining abiotic photosensitisers such as quantum dots (QDs) with non-photosynthetic bacteria presents an intriguing concept into the design of artificial photosynthetic organisms and solar-driven fuel production. Shewanella oneidensis MR-1 (MR-1) is a versatile bacterium concerning respiration, metabolism and biocatalysis, and is a promising organism for artificial photosynthesis as the bacterium's synthetic and catalytic ability provides a potential system for bacterial biohydrogen production. MR-1's hydrogenases are present in the periplasmatic space. It follows that for photoenergised electrons to reach these enzymes, QDs will need to be able to enter the periplasm, or electrons need to enter the periplasm via the Mtr pathway that is responsible for MR-1's extracellular electron transfer ability. As a step towards this goal, various QDs were tested for their photo-reducing potential, nanotoxicology and further for their interaction with MR-1. CdTe/CdS/TGA, CdTe/CdS/Cysteamine, a commercial, negatively charged CdTe and CuInS2/ZnS/PMAL QDs were examined. The photoreduction potential of the QDs was confirmed by measuring their ability to photoreduce methyl viologen with different sacrificial electron donors. The commercial CdTe and CuInS2/ZnS/PMAL QDs showed no toxicity towards MR-1 as evaluated by a colony-forming units method and a fluorescence viability assay. Only the commercial negatively charged CdTe QDs showed good interaction with MR-1. With transmission electron microscopy, QDs were observed both in the cytoplasm and periplasm. These results inform on the possibilities and bottlenecks when developing bionanotechnological systems for the photosynthetic production of biohydrogen by MR-1.

Recommendations for clinical translation of nanoparticle-enhanced radiotherapy.

A multi-disciplinary cooperative for nanoparticle-enhanced radiotherapy (NERT) has been formed to review the current status of the field and identify key stages towards translation. Supported by the Colorectal Cancer Healthcare Technologies Cooperative, the cooperative comprises a diverse cohort of key contributors along the translation pathway including academics of physics, cancer and radio-biology, chemistry, nanotechnology and clinical trials, clinicians, manufacturers, industry, standards laboratories, policy makers and patients. Our aim was to leverage our combined expertise to devise solutions towards a roadmap for translation and commercialisation of NERT, in order to focus research in the direction of clinical implementation, and streamline the critical pathway from basic science to the clinic. A recent meeting of the group identified barriers to and strategies for accelerated clinical translation. This commentary reports the cooperative's recommendations. Particular emphasis was given to more standardised and cohesive research methods, models and outputs, and reprioritised research drivers including patient quality of life following treatment. Nanoparticle design criteria were outlined to incorporate scalability of manufacture, understanding and optimisation of biological mechanisms of enhancement and in vivo fate of nanoparticles, as well as existing design criteria for physical and chemical enhancement. In addition, the group aims to establish a long-term and widespread international community to disseminate key findings and create a much-needed cohesive body of evidence necessary for commercial and clinical translation.

Iron supported on bioinspired green silica for water remediation.

Iron has been used previously in water decontamination, either unsupported or supported on clays, polymers, carbons or ceramics such as silica. However, the reported synthesis procedures are tedious, lengthy (involving various steps), and either utilise or produce toxic chemicals. Herein, the use of a simple, rapid, bio-inspired green synthesis method is reported to prepare, for the first time, a family of iron supported on green nanosilica materials (Fe@GN) to create new technological solutions for water remediation. In particular, Fe@GN were employed for the removal of arsenate ions as a model for potentially toxic elements in aqueous solution. Several characterization techniques were used to study the physical, structural and chemical properties of the new Fe@GN. When evaluated as an adsorption platform for the removal of arsenate ions, Fe@GN exhibited high adsorption capacity (69 mg of As per g of Fe@GN) with superior kinetics (reaching ∼35 mg As per g sorbent per hr) - threefold higher than the highest removal rates reported to date. Moreover, a method was developed to regenerate the Fe@GN allowing for a full recovery and reuse of the adsorbent in subsequent extractions; strongly highlighting the potential technological benefits of these new green materials.