Autohydrolysis Application on Vine Shoots and Grape Stalks to Obtain Extracts Enriched in Xylo-Oligosaccharides and Phenolic Compounds.

Agronomic practices and the winemaking process lead to the production of considerable quantities of waste and by-products. These are often considered waste with negative effects on environmental sustainability. However, vine shoots and grape stalks can be reused, representing a potential source of xylo-oligosaccharides and polyphenols. In this context, the purpose of this work was to obtain enriched extracts using three different autohydrolysis treatments with (i) H2O, (ii) H2O:EtOH, and (iii) H2O:Amberlyst. The obtained extracts were characterized by their xylo-oligosaccharide and polyphenol profiles using LC-MS techniques. The use of ethanol during autohydrolysis allowed for greater extraction of xylan-class compounds, especially in vine shoot samples, while an increase in antioxidant activity (128.04 and 425.66 µmol TE/g for ABTS and DPPH, respectively) and in total phenol content (90.92 mg GAE/g) was obtained for grape stalks.

Eco-Friendly Catalytic Synthesis of Top Value Chemicals from Valorization of Cellulose Waste.

The total amount of cellulose from paper, wood, food, and other human activity waste produced in the EU is in the order of 900 million tons per year. This resource represents a sizable opportunity to produce renewable chemicals and energy. This paper reports, unprecedently in the literature, the usage of four different urban wastes such as cigarette butts, sanitary pant diapers, newspapers, and soybean peels as cellulose fonts to produce valuable industrial intermediates such as levulinic acid (LA), 5-acetoxymethyl-2-furaldehyde (AMF), 5-(hydroxymethyl)furfural (HMF), and furfural. The process is accomplished by the hydrothermal treatment of cellulosic waste using both Brønsted and Lewis acid catalysts such as CH3COOH (2.5-5.7 M), H3PO4 (15%), and Sc(OTf)3 (20% w:w), thus obtaining HMF (22%), AMF (38%), LA (25-46%), and furfural (22%) with good selectivity and under relatively mild conditions (T = 200 °C, time = 2 h). These final products can be employed in several chemical sectors, for example, as solvents, fuels, and for new materials as a monomer precursor. The characterization of matrices was accomplished by FTIR and LCSM analyses, demonstrating the influence of morphology on reactivity. The low e-factor values and the easy scale up render this protocol suitable for industrial applications.

Steel slag as low-cost catalyst for artificial photosynthesis to convert CO2 and water into hydrogen and methanol.

Photoreduction of CO2 with sunlight to produce solar fuels, also named artificial photosynthesis, is considered one of the most attractive strategies to face the challenge of reducing greenhouse gases and achieving climate neutrality. Following an approach in line with the principles of the circular economy, the low-cost catalytic system (1) based on an industrial by-product such as steel slag was assessed, which was properly modified with nanostructured palladium on its surface in order to make it capable of promoting the conversion of CO2 into methanol and hydrogen through a two-stage process of photoreduction and thermal conversion having formic acid as the intermediate. Notably, for the first time in the literature steel slag is used as photoreduction catalyst.

Valorization of cigarette butts for synthesis of levulinic acid as top value-added chemicals.

Unprecedented in the literature, levulinic acid (LA), one of the top value-added intermediates of chemical industry, is obtained from cigarette butts as cellulose feedstock by means of a one-pot hydrothermal process carried out at 200 °C for 2 h and catalysed by phosphoric acid. The protocol avoids the use of more aggressive and toxic H2SO4 and HCl, that are generally employed on several cellulose sources (e.g. sludge paper), thus minimizing corrosion phenomena of plants. Neither chemical pre-treatment of butts nor specific purification procedure of LA are required. Notably, by simply modifying acid catalyst (e.g. using CH3COOH), another top value-added fine chemical such as 5-hydroxymethylfuraldehyde (HMF) is obtained, thus widening the scope of the method. Being cigarette filters a waste available in quantities of megatonnes per year, they represent an unlimited at no cost source of cellulose, thus enabling the up-scale to an industrial level of LA production.

Concerning Synthesis of New Biobased Polycarbonates with Curcumin in Replacement of Bisphenol A and Recycled Diphenyl Carbonate as Example of Circular Economy.

Curcumin (CM) is a natural polyphenol wellknown for its antioxidant and pharmaceutical properties, that can represent a renewable alternative to bisphenol A (BPA) for the synthesis of biobased polycarbonates (PC). In the presented strategy, preparation of the CMbased PC was coupled with chemical recycling of the fossilbased BPA polycarbonate (BPAPC) conducting a twosteps transpolymerization that replaces BPA monomer with CM or its tetrahydrogenated colorless product (THCM). In the first step of synthetic strategy, depolymerization of commercial BPAPC was carried out with phenol as nucleophile, according to our previous procedure based on zinc derivatives and ionic liquids as catalysts, thus producing quantitatively diphenyl carbonate (DPC) e BPA. In the second step, DPC underwent a melt transesterification with CM or THCM monomers affording the corresponding biobased polycarbonates, CMPC and THCMPC, respectively. THCM was prepared by reducing natural bisphenol with cyclohexene as a hydrogen donor and characterized by 1H-NMR and MS techniques. Polymerization reactions were monitored by infrared spectroscopy and average molecular weights and dispersity of the two biobased polymers THCMPC and CMPC were determined by means of gel permeation chromatography (GPC). Optical properties of the prepared polymers were also measured.

Preparation and Characterization of Soybean Oil-Based Polyurethanes for Digital Doming Applications.

Polyurethane-resin doming is currently one of the fastest growing markets in the field of industrial graphics and product identification. Semi-rigid bio-based polyurethanes were prepared deriving from soybean oil as a valuable alternative to fossil materials for digital doming and applied to digital mosaic technology. Bio-resins produced can favorably compete with the analogous fossil polymers, giving high-quality surface coatings (ascertained by SEM analyses). In addition, polyurethane synthesis was accomplished by using a mercury- and tin-free catalyst (the commercially available zinc derivative K22) bringing significant benefits in terms of cost efficiency and eco-sustainability.

One-Pot Conversion of Epoxidized Soybean Oil (ESO) into Soy-Based Polyurethanes by MoCl2O2 Catalysis.

An innovative and eco-friendly one-pot synthesis of bio-based polyurethanes is proposed via the epoxy-ring opening of epoxidized soybean oil (ESO) with methanol, followed by the reaction of methoxy bio-polyols intermediates with 2,6-tolyl-diisocyanate (TDI). Both synthetic steps, methanolysis and polyurethane linkage formation, are promoted by a unique catalyst, molybdenum(VI) dichloride dioxide (MoCl2O2), which makes this procedure an efficient, cost-effective, and environmentally safer method amenable to industrial scale-up.

Site-dependent biological activity of valinomycin analogs bearing derivatizable hydroxyl sites.

Valinomycin (VLM, 1) is a K(+) ionophore cyclodepsipeptide capable of depolarizing mitochondria and inducing apoptosis to several mammalian cell types, including a number of tumor cell lines. With the aim of creating VLM-based ligand-targeted anticancer drugs that may selectively convey VLM to pathological cells, we have previously introduced derivatizable hydroxyl handles into the VLM structure, allowing to access a three-entity library of monohydroxyl VLMs (HyVLMs) bearing the OH group at the isopropyl side chain of a D-Hyi, D-Val, or L-Val residue (analogs 2-4, respectively). Herein, the levels of bioactivity retained by the conjugable HyVLMs have been assessed on the basis of their ability to alter the functionality of isolated rat-liver mitochondria. Experiments run with HyVLMs in the range 1-10 nM and in 20 or 125 mM KCl medium show that the hydroxyl group reduces the potency of HyVLMs relative to VLM to an extent that depends upon the molecular site involved in the hydroxylation. On the other hand, estimation of the stability constants of complexes (in methanol at 25 °C) of each analog with Na(+), K(+), and Cs(+) reveals that HyVLMs nicely retain the VLM binding features, except for a moderate increase in the stability of Na(+) complexes. These findings, along with pertinent structural considerations, suggest that the incorporation of OH into the VLM structure might actually have altered its K(+) transporting ability across mitochondrial membranes. Besides facing new aspects of VLM structure-activity relationship, these studies set the basis for the rational design of ligand-HyVLMs conjugates through derivatization of hanging OH group.

Antitumor potential of conjugable valinomycins bearing hydroxyl sites: in vitro studies.

Following our pioneering studies on the direct and efficient introduction of derivatizable hydroxyl handles into the valinomycin (VLM, 1) structure, a K(+)-ionophore with potent antitumor activity, the ensuing conjugable analogues (HyVLMs 2, 3, and 4) have herein been compared to the parent macrocycle for their potential antiproliferative effects on a panel of cancer cell lines, namely, human MCF-7, A2780, and HepG2, as well as rat C6 cells. On the basis of IC50 values, we find that hydroxyl analogues 3 and 4 are only moderately less active than 1, while analogue 2 experiences a heavily diminished activity. Cytofluorimetric analyses of MCF-7 cells treated with HyVLMs suggest that the latter depolarize mitochondria, thus retaining the typical VLM behavior. It is likely that C6 cells, for which the exceptionally potent cytotoxicity of VLM has never reported previously, follow the same fate, as evidenced by alteration of mitochondrial morphology upon incubation with each ionophore.

MALDI-TOF mass spectrometry detection of extra-virgin olive oil adulteration with hazelnut oil by analysis of phospholipids using an ionic liquid as matrix and extraction solvent.

The adulteration of extra virgin olive oil (EVOO) with hazelnut oil (HO) is frequent and constitutes a serious concern both for oil suppliers and consumers. The high degree of similarity between the two oils as regards triacylglycerol, total sterol and fatty acid profile, complicates the detection of low percentages of HO in EVOO. However, phospholipids (PLs) are usually present in seed oils at a concentration range of 10-20 g/kg, while the amounts of PLs in VOOs are 300-400 times lower. Thus, in this work a sample pretreatment procedure focused towards the selective PLs extraction was developed; the Bligh-Dyer extraction procedure was modified introducing the ionic liquid resulting from the combination of TBA (tributylamine) and CHCA (α-Cyano-4-hydroxycinnamic acid) as extraction solvent. The selective extraction and enrichment of phospholipids from EVOO and HO samples was then achieved. The relevant extracts were analyzed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) using the same ionic liquid TBA-CHCA as MALDI matrix, that was found to be very suitable for PLs analysis. In fact, a remarkable increase of the phospholipids signals, with a simultaneous decrease of those relevant to triacylglycerols and diacylglycerols, was observed in the relevant mass spectra. The applicability of the whole method to the individuation of the presence of HO in EVOO was demonstrated by the analysis of EVOO samples progressively adulterated with variable quantities of HO, that was still detectable at a 1% contamination level.

Concerning selectivity in the oxidation of peptides by dioxiranes. Further insight into the effect of carbamate protecting groups.

With use of methyl(trifluoromethyl)dioxirane (TFDO), the oxidation of some tripeptide esters protected at the N-terminus with carbamate or amide groups could be achieved efficiently under mild conditions with no loss of configuration at the chiral centers. Expanding on preliminary investigations, it is found that, while peptides protected with amide groups (PG = Ac-, Tfa-, Piv-) undergo exclusive hydroxylation at the side chain, their analogues bearing a carbamate group (PG = Cbz-, Moc-, Boc-, TcBoc-) give competitive and/or concurrent hydroxylation at the terminal N-H moiety. Valuable nitro derivatives are also formed as a result of oxidative deprotection of the carbamate group with excess dioxirane. A rationale is proposed to explain the dependence of the selectivity upon the nature of the protecting group.