Clinical Outcomes and Repair Integrity After Double-Row Modified Mason-Allen Repair Technique With a Single Knot in Small to Medium Supraspinatus Tears.

Background: Various arthroscopic rotator cuff repair techniques are being used for the treatment of rotator cuff tears with the development of surgical instruments. However, retears after repair are not completely avoidable, and efforts to reduce retears remain a challenge. Purpose/Hypothesis: To introduce a new repair technique, the double-row modified Mason-Allen technique with a single knot, and to compare clinical outcomes and retear rates with the single-row modified Mason-Allen technique. It was hypothesized that this new technique would have a better clinical outcome and significantly lower retear rate than the single-row modified Mason-Allen technique. Study Design: Cohort study; Level of evidence, 3. Methods: A total of 110 patients with small- to medium-sized (<1.5 cm) full-thickness supraspinatus tears were enrolled into 2 groups, with 65 patients receiving the single-row modified Mason-Allen technique (group A) and 45 patients receiving the double-row modified Mason-Allen technique with a single knot (group B). The clinical and functional outcomes were evaluated using the American Shoulder and Elbow Surgeons (ASES) score; Disabilities of the Arm, Shoulder and Hand (DASH) score; and visual analog scale (VAS) for pain and satisfaction scores. All patients enrolled in this study were monitored for a minimum of 24 months. Magnetic resonance imaging was performed to analyze the integrity of tendons and retear at 6 months after surgery. Results: No statistically significant differences between the 2 groups were found regarding the VAS for pain, ASES, and DASH scores. However, retear was found in 9 patients (13.8%) in group A and 1 patient (2.2%) in group B. The difference in the retear rate was statistically significant between the 2 groups (P = .037). Conclusion: A significantly lower retear rate and comparable clinical outcomes were seen after the double-row modified Mason-Allen repair technique with a single knot when compared with the single-row modified Mason-Allen technique. Based on these findings, the double-row modified Mason-Allen repair technique with a single knot can be considered a surgical treatment option that can provide sufficient stability in small- to medium-sized supraspinatus tears.

Effect of Meniscal Tear Patterns and Preoperative Cartilage Status on Joint Space Width After Medial Opening-Wedge High Tibial Osteotomy.

BACKGROUND: Medial opening-wedge high tibial osteotomy (MOWHTO) is performed to treat young adults with medial compartment knee osteoarthritis associated with varus deformity. However, factors influencing joint space width (JSW) vary according to the type of medial meniscal tear and have not yet been completely elucidated. PURPOSE: To examine changes in JSW according to the type of medial meniscal tear after MOWHTO and analyze the influencing factors. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: This study was conducted on 134 patients who underwent MOWHTO for medial osteoarthritis and were followed up for >2 years. The patients were classified into 3 groups based on medial meniscal status: intact, nonroot tear, and root tear. The authors then measured the JSW preoperatively and at 3 months, 6 months, 1 year, and >2 years postoperatively; analyzed whether the change in JSW varied according to meniscal status; and determined the association of these changes with the preoperative cartilage grade of the medial femoral condyle (MFC) and medial tibial plateau (MTP). International Knee Documentation Committee (IKDC) scores were used to evaluate clinical function. RESULTS: Of the 134 patients, the medial meniscus was intact in 29 patients, a nonroot tear was observed in 58 patients, and a root tear was observed in 47 patients. Postoperatively, JSW increased for all groups, but the timing of the increase varied between the groups (P < .001). JSW increased the most 6 months postoperatively in the intact group and 3 months postoperatively in the nonroot tear and root tear groups (P < .001). Additionally, the increase in JSW was the greatest in the root tear group. Preoperatively, MFC and MTP cartilage status differed among the groups; MTP status did not affect the JSW, but MFC status did (P < .001). The IKDC score increased from the preoperative to postoperative time point in all groups, but there was no significant difference between groups. CONCLUSION: The authors observed that the amount and timing of increase in JSW were dependent on the pattern of medial meniscal tear observed when MOWHTO was performed. In addition, the cartilage grade of MFC before surgery was associated with changes in JSW. The IKDC score was not significantly different between groups. However, a longer follow-up period is needed to analyze the correlation with the meniscal tear pattern and JSW.

Evolution of the throwing shoulder: why apes don't throw well and how that applies to throwing athletes.

BACKGROUND: Humans have unique characteristics making us the only primate that can throw well while most other primates throw predominately underhand with poor speed and accuracy. The purpose of this study is to illuminate the uniquely human characteristics that allow us to throw so well. When treating an injury such as a labral tear or capsule tear, this study hopes the reader can gain a better understanding of the issues that lead to the tear and those that may determine the success of treatment besides the actual repair. METHODS: In addition to a review of scientific and medical literature, information was obtained from interviews and experience with primate veterinarians, anthropologists, archeologists, and professional baseball players. These sources were used to study the connection between evolutionary throwing activities and current sports medicine issues. RESULTS: Arm acceleration requires a functional kinetic chain, rapid motor sequences, and the ability to absorb elastic energy in the shoulder. Successful treatment of the throwing shoulder requires awareness of the shoulder's position in the kinetic chain and correction of defects in the ability to execute the kinetic chain. Some problems in the shoulder could reflect regression to a more primitive anatomy or dyskinesis. Return of performance requires regaining the elasticity in the tissues of the shoulder to temporarily store kinetic energy. For example, tissue remodeling after rotator cuff repair continues for months to years; however, the newly formed tissue lacks the same elasticity of the native tendon. This suggests why throwing performance typically does not return for 7 or more months after repair even though there may be structural integrity at 3-4 months. CONCLUSION: The shoulder has developed uniquely in modern man for the act of throwing. The anatomic deficiencies in primates for throwing provide an illustration of the more subtle changes that a throwing athlete might have that are detrimental to throwing. Nonhuman primates have been unable to demonstrate the kinetic chain sequence for throwing secondary to the lack of neurologic pathways required. Humans are more sophisticated and precise in their movements but lack robusticity in their bone and muscle architecture, seen especially in the human rotator cuff. Successful treatment of a throwing injury requires familiarity with the conditions that cause the injury or affect the rehabilitation process. The return of performance following injury or surgery requires regaining the elasticity in the tissues of the shoulder to temporarily store kinetic energy from the kinetic chain.

Is Prophylactic Antibiotic Use Necessary Before Dental Procedures in Primary and Revision TKA? A Propensity Score-matched, Large-database Study.

BACKGROUND: The question of whether dental procedures increase the risk of periprosthetic joint infection (PJI) in patients who have undergone total joint arthroplasty (TJA) remains controversial. QUESTIONS/PURPOSES: (1) Are dental procedures associated with an increased incidence of PJI in the setting of either primary or revision TKA after controlling for relevant potentially confounding variables? (2) Is the administration of prophylactic antibiotics before dental procedures associated with any differences in this risk? (3) Which factors are associated with increased incidence of PJI after dental procedures? METHODS: This nationwide, retrospective, comparative, large-database study evaluated 591,602 patients who underwent unilateral primary or revision TKA between 2009 and 2019 using the Health Insurance Review and Assessment Service data in South Korea, in which all people in South Korea were registered and to which all medical institutions must charge any procedures they performed. The study population was divided into 530,156 patients with dental procedures and 61,446 patients without dental procedures based on whether the patients underwent a dental procedure at least 1 year after the index surgery. After propensity score matching, patients were classified into a dental (n = 182,052) and a nondental cohort (n = 61,422). The dental cohort was then divided into two groups: 66,303 patients with prophylactic antibiotics and 115,749 patients without prophylactic antibiotics based on prophylactic antibiotic use. After propensity score matching, patients were categorized into prophylactic (n = 66,277) and nonprophylactic (n = 66,277) cohorts. Propensity score matching was used to control for covariates including posttraumatic arthritis associated with PJI risk according to the dental procedure and prophylactic antibiotic use among the cohorts. After propensity score matching, the standardized mean difference was confirmed to be less than 0.1 for all variables. Kaplan-Meier survival analyses, log-rank tests, and Cox proportional hazards regression analysis was performed. RESULTS: Dental procedures were not associated with an increase in PJI risk after primary (adjusted HR 1.56 [95% CI 0.30 to 8.15]; p = 0.60) or revision TKA (adjusted HR 1.74 [95% CI 0.90 to 3.34]; p = 0.10). Additionally, use of prophylactic antibiotics was not associated with a reduced PJI risk after the index surgery, either for primary (adjusted HR 1.28 [95% CI 0.30 to 5.42]; p = 0.74) or revision TKA (adjusted HR 0.74 [95% CI 0.45 to 1.23]; p = 0.25). Although surgery type and prophylactic antibiotic use exhibited no influence on PJI occurrence after dental procedures, posttraumatic arthritis was associated with PJI. The adjusted HR for posttraumatic arthritis was 4.54 (p = 0.046). CONCLUSION: Our findings suggest that dental procedures were not associated with an increased risk of PJI for up to 2 years after the dental procedure in patients who underwent either primary or revision TKA. Based on these findings, there is insufficient rationale for the use of prophylactic antibiotics before dental procedures in patients who have undergone primary or revision TKA. LEVEL OF EVIDENCE: Level III, therapeutic study.

Repair of medial meniscus posterior root tear is effective for root healing and cartilage regeneration in opening wedge high tibial osteotomy.

PURPOSE: This study aimed to determine whether the repair of a medial meniscus posterior root tear (MMPRT) is effective for MMPRT healing, cartilage regeneration, and clinical outcomes in opening wedge high tibial osteotomy (OWHTO). METHODS: This retrospective study included 80 patients who underwent OWHTO and subsequent second-look arthroscopy. The patients were divided into OWHTO-with-MMPRT-repair (n = 40) and OWHTO alone (n = 40) groups, and the healing rates (complete/partial/failure) were compared. Each group was further divided into over- and under-corrected subgroups to compare healing rates. The International Cartilage Repair Society (ICRS) grade, cartilage defect size, Koshino stage, ICRS cartilage repair assessment score of the medial femoral condyle (MFC), and International Knee Documentation Committee (IKDC) scores between the OWHTO-with-MMPRT-repair and OWHTO alone groups were compared according to whether microfracture was performed on the MFC. RESULTS: The overall healing rate of the MMPRT was higher in the OWHTO-with-MMPRT-repair group than that in the OWHTO alone group (P < 0.001). In addition, in the subgroup analysis, no difference in the MMPRT healing rate between the over-correction and under-correction groups when MMPRT repair was performed (n.s). In contrast, without MMPRT repair, the healing rate was lower in the under-correction group than that in the over-correction group (P = 0.03). Cartilage regeneration of the OWHTO-with-MMPRT-repair group was superior to that of the OWHTO alone group (P < 0.05). The IKDC subjective scores of the OWHTO-with-MMPRT-repair and OWHTO alone groups were 34.5 and 33.1 before surgery (n.s) and 50 and 47.2 at one year after surgery, respectively (n.s). These differences between the two groups for cartilage regeneration and IKDC subjective scores showed the same pattern regardless of microfractures. CONCLUSIONS: MMPRT repair during OWHTO might improve MMPRT healing, even with under-correction, and cartilage regeneration of MFC, regardless of microfracture. However, OWHTO with MMPRT repair might not improve short-term clinical outcomes compared to OWHTO alone. Further randomized clinical trials are necessary. LEVEL OF EVIDENCE: III, Retrospective cohort study.

Determining the Relationship between Mechanical Properties and Quantitative Magnetic Resonance Imaging of Joint Soft Tissues Using Patient-Specific Templates.

To determine whether the mechanical properties of joint soft tissues such as cartilage can be calculated from quantitative magnetic resonance imaging (MRI) data, we investigated whether the mechanical properties of articular cartilage and meniscus scheduled to be resected during arthroplasty are correlated with the T2 relaxation time on quantitative MRI at the same location. Six patients who had undergone knee arthroplasty and seven who had undergone hip arthroplasty were examined. For the knee joint, the articular cartilage and lateral meniscus of the distal lateral condyle of the femur and proximal lateral tibia were examined, while for the hip joint, the articular cartilage above the femoral head was studied. We investigated the relationship between T2 relaxation time by quantitative MRI and stiffness using a hand-made compression tester at 235 locations. The patient-individualized template technique was used to align the two measurement sites. The results showed a negative correlation (from -0.30 to -0.35) in the less severely damaged articular cartilage and meniscus. This indicates that tissue mechanical properties can be calculated from T2 relaxation time, suggesting that quantitative MRI is useful in determining when to start loading after interventional surgery on cartilage tissue and in managing the health of elderly patients.

Bicruciate-retaining total knee arthroplasty procedure reduced tensile force in the middle and posterior components of lateral collateral ligament during deep knee flexion activities with no effect on tensile force of the medial collateral ligament.

PURPOSE: To analyse the effects of bicruciate-retaining total knee arthroplasty (BCR-TKA) on the tensile force of the collateral ligaments during two deep knee flexion activities, cross-leg sitting and squatting. METHODS: Thirteen patients (15 knees) treated using bicruciate-retaining total knee arthroplasty (BCR-TKA) for knee joint osteoarthritis were analysed. Knee joint kinematics during cross-leg sitting (open-chain flexion) and squatting (closed-chain flexion) were evaluated through fluoroscopy. The tensile force was calculated in vivo based on the change in the distance between the femoral and tibial attachment areas for the anterior, middle, and posterior components of the superficial (sMCL) and deep (dMCL) medial collateral ligament and the lateral collateral ligament (LCL). Differences in the calculated tensile forces of the collateral ligaments were evaluated using repeated measures of analysis of variance, with post hoc pairwise comparison (Bonferroni test). Statistical significance was set at P ≤ 0.05. RESULTS: The correction of the coronal alignment was related to the surgical technique, not to the implant design. No significant change in the tensile force in all three components of the sMCL from pre- to post-TKA (n.s.) was observed. For dMCL, a pre- to post-TKA change in the tensile force was observed only for the anterior dMCL component (p = 0.03). No change was observed in the tensile force of the anterior LCL with increasing flexion, with no difference in pre- to post-TKA and between activities (n.s.). In contrast, tensile force in the middle LCL slightly decreased with increasing flexion during squatting, pre- and post-TKA. After surgery, lower forces were generated at 40° of flexion (p = 0.04). Tensile force in the posterior LCL was higher in extension than flexion, which remained high in the extension post-TKA. However, after surgery, lower tensile forces were generated at 10° (p = 0.04) and 40° (p = 0.04) of flexion. CONCLUSIONS: The in vivo change in tensile forces of the collateral ligaments of the knee before and after BCR-TKA can inform the development of appropriate ligament balancing strategies to facilitate recovery of deep knee flexion activities after TKA, as well as for continued improvement of BCR-TKA designs. LEVEL OF EVIDENCE: III.

Subject-specific computational modeling of acromioclavicular and coracoclavicular ligaments.

BACKGROUND: Disruption of the acromioclavicular joint is a common injury. Despite the different surgical procedures described for treating this injury, complications such as loss of reduction and failure of fixation remain unacceptably high. We developed a computer model of the acromioclavicular joint to better understand the biomechanical contributions of the ligaments that are typically injured. METHODS: Six fresh frozen human cadaveric shoulders were tested on an AMTI VIVO 6-degree of freedom test platform to measure force-displacement in inferior translation, anteroposterior translation, and internal rotation before and after sequentially transecting the coracoclavicular and acromioclavicular ligaments. These data were used to construct computer models of each specimen. Three-dimensional computed tomographic scans were used to generate a rigid-body dynamics model using the AnyBody Modeling System. The scapula and clavicle were connected by the acromioclavicular joint capsule, the conoid ligament, and the trapezoid ligament. Subject-specific ligament properties were calculated by matching computer predictions to experimental force-displacement data. RESULTS: The calculated free lengths of the conoid, trapezoid, and acromioclavicular ligaments were 13.5 (±3.2), 11.8 (±2.4), and 11.0 (±2.7) mm, respectively. The calculated stiffnesses of the conoid, trapezoid, and acromioclavicular ligaments were 34.3 (±6.3), 28.4 (±3.2), and 33.8 (±8.2) N/mm, respectively. Root mean square deviation (RMSD) of predicted force-displacement curves relative to experimental force-displacement curves (during inferior and anteroposterior translation) was less than 1 mm. For validation of subject-specific models, after ligament properties were calculated, the RMSD of the predicted torque over 15° of internal rotation was 12% of maximum rotational torque (average for 6 specimens). DISCUSSION AND CONCLUSION: Acromioclavicular disruption results in multidirectional instability, which requires careful consideration of the individual contributions of the injured ligaments. In addition, variations in patient anatomy can significantly affect the biomechanical stability of the reconstruction. Subject-specific models can enhance our understanding of the individual and collective biomechanical contributions of the injured soft tissues to the multiaxial stability of the acromioclavicular joint. These models may also be useful for analyzing and assessing biomechanical stability after various types of surgical reconstruction.

ALK-5 Inhibitors for Efficient Derivation of Mesenchymal Stem Cells from Human Embryonic Stem Cells.

Objectives: Successful tissue regeneration requires a clinically viable source of mesenchymal stem cells (MSCs). We explored activin receptor-like kinase (ALK)-5 inhibitors to rapidly derive an MSC-like phenotype with high cartilage forming capacity from a xeno-free human embryonic cell line. Methods: Embryonic stem cell (ESC) lines (H9 and HADC100) were treated with the ALK-5 inhibitor SB431542; HADC100 cells were additionally treated with ALK-5 inhibitors SB525334 or GW788388. Cells were then seeded upon human fibronectin in the presence of fibroblast growth factor 2 (FGF2) in a serum-free medium. Flow cytometry was used to assess MSC markers (positive for CD73, CD90, and CD105; negative for CD34 and CD45). Differentiation status was assessed through quantitative polymerase chain reaction. Cartilage forming capacity was determined in high-density pellet cultures, in fibrin gels containing extracellular matrix (fibrin-ECM), and after implantation in ex vivo human osteoarthritic cartilage. Gene expression, histology, and immunostaining were used to assess cartilage phenotype, tissue regeneration, and integration. Results: Exposure to all three ALK-5 inhibitors lead to expression of mesodermal gene markers and differentiation into MSC-like cells (embryonic stem cell-derived mesenchymal stem cells [ES-MSCs]) based on surface marker expression. ES-MSC in pellet cultures or in fibrin-ECM gels expressed high levels of chondrogenic genes: COL2A1, ACAN, and COMP; and low levels of COL1A1 and RUNX2. Cell pellets or fibrin constructs implanted into ex vivo human osteoarthritic cartilage defects produced GAG-rich (safranin O positive) and collagen type II-positive neocartilage tissues that integrated well with native diseased tissue. Conclusions: We developed a protocol for rapid differentiation of xeno-free ESC into MSC-like cells with high cartilage forming capacity with potential for clinical applications. Impact statement Osteoarthritis (OA) is a common disease resulting in significant disability and no approved disease modifying treatment (other than total joint replacement). Embryonic stem cell-derived cell therapy has the potential to benefit patients with cartilage lesions leading to OA and may prevent or delay the need for total joint replacement.

Challenges Facing the Translation of Embryonic Stem Cell Therapy for the Treatment of Cartilage Lesions.

Osteoarthritis is a common disease resulting in significant disability without approved disease-modifying treatment (other than total joint replacement). Stem cell-based therapy is being actively explored for the repair of cartilage lesions in the treatment and prevention of osteoarthritis. Embryonic stem cells are a very attractive source as they address many of the limitations inherent in autologous stem cells, such as variability in function and limited expansion. Over the past 20 years, there has been widespread interest in differentiating ESC into mesenchymal stem cells and chondroprogenitors with successful in vitro, ex vivo, and early animal studies. However, to date, none have progressed to clinical trials. In this review, we compare and contrast the various approaches to differentiating ESC; and discuss the benefits and drawbacks of each approach. Approaches relying on spontaneous differentiation are simpler but not as efficient as more targeted approaches. Methods replicating developmental biology are more efficient and reproducible but involve many steps in a complicated process. The small-molecule approach, arguably, combines the advantages of the above two methods because of the relative efficiency, reproducibility, and simplicity. To better understand the reasons for lack of progression to clinical applications, we explore technical, scientific, clinical, and regulatory challenges that remain to be overcome to achieve success in clinical applications.

Combination of Surgical Techniques Restores Multidirectional Biomechanical Stability of Acromioclavicular Joint.

PURPOSE: To measure the multiaxial stability of the acromioclavicular joint before and after transection of the acromioclavicular capsule and coracoclavicular ligaments and after sequential repair of acromioclavicular and coracoclavicular ligaments. METHODS: Biomechanical testing was performed on fresh-frozen human cadaveric shoulders (N = 6). Translational and rotational stability in the vertical and horizontal planes was measured in intact specimens, after transecting the acromioclavicular and coracoclavicular ligaments, and after sequentially performing the following procedures: single-bundle coracoclavicular repair (CCR), modified Weaver-Dunn procedure (WD), and acromioclavicular stabilization (ACS). RESULTS: Resecting the acromioclavicular and coracoclavicular significantly reduced translational stiffness in the inferior and anteroposterior directions, as well as rotational stiffness about the vertical and anteroposterior axes. All 3 surgical procedures increased inferior translational stiffness relative to the intact condition (Intact: 38 ± 9 N/mm, CCR: 54 ± 23 N/mm (P = .03), CCR+WD 52 ± 20 N/mm (P = .07), CCR ± WD+ACS 50 ± 21 N/mm (P = .17)). However, the combination of CCR, modified WD, and ACS resulted in the greatest increase in stiffness in internal rotation (Intact: 12.5 ± 7.4 cNm/deg, CCR: 1.2 ± 1.1 cNm/deg, CCR+WD 7.2 ± 3.0 N∗m/deg [P = .023], CCR+WD+ACS 11.6 ± 4.9 cNm/deg [P = .055]). CONCLUSIONS: The cumulative stability of CCR, WD reconstruction, and ACS appears to be additive. Our findings provide a biomechanical justification for combining all three techniques. Biomechanical studies assessing the performance of various acromioclavicular repairs and reconstructions should therefore incorporate multiaxial testing in their protocols. CLINICAL RELEVANCE: Multiple points of fixation that provide multidirectional stability have the potential to improve clinical outcomes and reduce failure rates of acromioclavicular joint repair or stabilization.

The Resistance Force of the Anterior Cruciate Ligament during Pull Probing Is Related to the Mechanical Property.

There are various methods for reconstructing the anterior cruciate ligament (ACL) from other muscles or tendons. Initial tension of the reconstructed ACL is one of the key elements affecting postoperative outcomes. However, tension cannot be measured after graft fixation. The only intraoperative assessment is pull probing, which is performed by pulling joint soft tissues with the arthroscopic probe and can be measured quantitatively. Therefore, its value might be used as an alternative value for the mechanical property of the ACL. Using a probing device one author developed to measure the resistance force of soft tissues quantitatively while probing, we measured the resistance force of dissected ACLs and used tensile testing to investigate the correlation between the resistance force and the mechanical property of the ligaments. According to the results, when a certain amount of tension (strain; 16.6%) was applied, its mechanical properties were moderately correlated (r = 0.56 [p = 0.045]) with the probing force. Therefore, the tension of the reconstructed ACL after fixation under real ACL reconstruction surgery can be derived from the value of the probing device.

Development of an Ex Vivo Murine Osteochondral Repair Model.

OBJECTIVE: Mouse models are commonly used in research applications due to the relatively low cost, highly characterized strains, as well as the availability of many genetically modified phenotypes. In this study, we characterized an ex vivo murine osteochondral repair model using human infrapatellar fat pad (IPFP) progenitor cells. DESIGN: Femurs from euthanized mice were removed and clamped in a custom multidirectional vise to create cylindrical osteochondral defects 0.5 mm in diameter and 0.5 mm deep in both condyles. The IPFP contains progenitors that are a promising cell source for the repair of osteochondral defects. For proof of concept, human IPFP-derived progenitor cells, from osteoarthritic (OA) patients, cultured as pellets, were implanted into the defects and cultured in serum-free medium with TGFß3 for 3 weeks and then processed for histology and immunostaining. RESULTS: The custom multidirectional vise enabled reproducible creation of osteochondral defects in murine femoral condyles. Implantation of IPFP-derived progenitor cells led to development of cartilaginous tissue with Safranin O staining and deposition of collagen type II in the extracellular matrix. CONCLUSIONS: We showed feasibility in creating ex vivo osteochondral defects and demonstrated the regenerative potential of OA human IPFP-derived progenitors in mouse femurs. The murine model can be used to study the effects of aging and OA on tissue regeneration and to explore molecular mechanisms of cartilage repair using genetically modified mice.

Mohawk is a transcription factor that promotes meniscus cell phenotype and tissue repair and reduces osteoarthritis severity.

Meniscus tears are common knee injuries and a major osteoarthritis (OA) risk factor. Knowledge gaps that limit the development of therapies for meniscus injury and degeneration concern transcription factors that control the meniscus cell phenotype. Analysis of RNA sequencing data from 37 human tissues in the Genotype-Tissue Expression database and RNA sequencing data from meniscus and articular cartilage showed that transcription factor Mohawk (MKX) is highly enriched in meniscus. In human meniscus cells, MKX regulates the expression of meniscus marker genes, OA-related genes, and other transcription factors, including Scleraxis (SCX), SRY Box 5 (SOX5), and Runt domain-related transcription factor 2 (RUNX2). In mesenchymal stem cells (MSCs), the combination of adenoviral MKX (Ad-MKX) and transforming growth factor-ß3 (TGF-ß3) induced a meniscus cell phenotype. When Ad-MKX-transduced MSCs were seeded on TGF-ß3-conjugated decellularized meniscus scaffold (DMS) and inserted into experimental tears in meniscus explants, they increased glycosaminoglycan content, extracellular matrix interconnectivity, cell infiltration into the DMS, and improved biomechanical properties. Ad-MKX injection into mouse knee joints with experimental OA induced by surgical destabilization of the meniscus suppressed meniscus and cartilage damage, reducing OA severity. Ad-MKX injection into human OA meniscus tissue explants corrected pathogenic gene expression. These results identify MKX as a previously unidentified key transcription factor that regulates the meniscus cell phenotype. The combination of Ad-MKX with TGF-ß3 is effective for differentiation of MSCs to a meniscus cell phenotype and useful for meniscus repair. MKX is a promising therapeutic target for meniscus tissue engineering, repair, and prevention of OA.

Sagittal orientation of coracoclavicular ligament reconstruction affects the stability of surgical repair.

BACKGROUND: The variation in the anatomic relationship between the coracoid and the clavicle affects the biomechanical stability of coracoclavicular ligament reconstruction (CCLR). METHODS: Three-dimensional computed tomography reconstruction of 85 patients was analyzed. Anatomic landmarks were used to derive the coracoclavicular sagittal reconstruction angle (sRA). The lateral concave angle, which indicated the shape of the distal clavicle, and the offsets between the clavicle and coracoid were also measured. To investigate the biomechanical effects of the sRA on CCLR, 7 computed tomography scans with different sRAs were 3D printed. Two reconstructions, a single trans-coracoclavicular tunnel and a looped reconstruction technique, were performed sequentially. Models were cyclically loaded at 70 N in the anterior, posterior, and superior directions. RESULTS: The mean sRA was 68° ± 9.3° (range, 47°-85°). The superoinferior offset between the clavicle and the coracoid and the lateral concave angle positively correlated with the sRA (r = 0.359 and 0.837, respectively; P ≤ .001), whereas the anteroposterior offset had a negative correlation (r = -0.925; P < .001). The sRA had a negative correlation with the anterior displacement of the clavicle (rho = -0.96; P < .001) and a positive correlation with the posterior displacement for both surgical techniques (rho = 1.0; P < .001). CONCLUSION: The anatomic orientation of the native coracoclavicular ligaments is highly variable in the sagittal plane. Low sagittal angles can reduce anterior stability, whereas high sagittal angles can reduce posterior stability of CCLR.

Huge intrameniscal cyst successfully treated by open debridement and combined arthroscopic and open repair: a case report.

BACKGROUND: Meniscal cysts are not uncommon in clinical practice, with reported incidence rates varying from 1 to 22%. Most meniscal cysts are parameniscal cysts, which are created by extravasation of synovial fluid through the meniscal tear into the adjacent soft tissue. In contrast, intrameniscal cysts in which the fluid collects in the meniscus are very rare. We encountered a teenager with a huge intrameniscal cyst accompanied by a small vertical meniscal tear in the red-white zone of the upper surface of the medial meniscus. A literature search revealed no information regarding the appropriate treatment methods and results for this type of lesion. CASE PRESENTATION: A 14-year-old boy presented to our outpatient clinic because of right knee pain that had been present for the previous 2 months. The patient participated in Hapkido, but had no specific trauma history. Magnetic resonance imaging revealed a huge intrameniscal cyst located in the central parenchyma of the posteromedial corner of the medial meniscus. In addition, one sagittal slice on MRI revealed a vertical tear in the red-white zone of the upper surface of the medial meniscus. The presence of such a tear accompanied by a huge intrameniscal cyst is very unusual. The patient was treated via arthroscopic inside-out meniscal suture repair and open cystic debridement with additional meniscocapsular suturing. During 4 years of magnetic resonance imaging follow-up, the lesion has completely disappeared and the meniscus has successfully recovered its normal form. CONCLUSIONS: Our treatment method may be considered as the first choice for young patients who require surgical treatment for large intrameniscal cysts with accompanying small vertical meniscal tears.

Vertical and Rotational Stiffness of Coracoclavicular Ligament Reconstruction: A Biomechanical Study of 3 Different Techniques.

PURPOSE: To compare the biomechanical stability of 3 different coracoclavicular reconstruction techniques under rotational and vertical loading using a cadaveric model. METHODS: In total, 12 cadaveric shoulders were used for testing. The native state was first tested then followed by 3 different reconstruction configurations using suture tapes and cortical buttons: coracoid loop (CL), single-bundle (SB), and double-bundle (DB). Superior displacement was measured by cycling an inferiorly directed force of 70 N to the scapula. The rotational stiffness of the scapula was determined by cycling the scapula in rotational displacement control between 15° of internal and external rotation. The rotational stiffness of the clavicle was determined by rotating the clavicle around its long axis 20° anteriorly and 30° posteriorly in rotational displacement control. All measurements were captured over 10 cycles at a rate of 200 Hz. RESULTS: Both the CL and SB techniques demonstrated significantly less internal scapular rotation stiffness. (intact: 19.70 ± 9.07 cNm/deg, CL: 3.70 ± 2.63 cNm/deg, SB:4.30 ± 2.66 cNm/deg, P <.001) External scapular rotation stiffness was significantly decreased in all techniques (intact: 17.70 ± 4.43 cNm/deg, CL: 3.30 ± 1.37 cNm/deg, SB: 4.50 ± 1.56 cNm/deg, DB: 4.67 ± 1.99 cNm/deg, P < .001). The CL and SB reconstructions were significantly less stiff with regards to posterior rotation of the clavicle (intact: 5.60 ± 1.80 cNm/deg, CL: 2.90 ± 1.10 cNm/deg, SB: 1.40 ± 0.65 cNm/deg, P < .001). Anterior rotation stiffness of the clavicle was significantly lower in all of the reconstructions (intact: 6.95 ± 1.90 cNm/deg, CL: 3.08 ± 0.84 cNm/deg, SB: 3.64 ± 0.93 cNm/deg, DB: 4.48 ± 1.21 cNm/deg, P < .001). CONCLUSIONS: None of the described techniques provided equivalent rotational stability in all planes compared with the native state. DB reconstruction presented stiffness characteristics closest to the native state under cyclic loading during internal scapular and posterior clavicular rotation. CLINICAL RELEVANCE: Additional procedures such as tendon grafting or acromioclavicular ligament reconstruction may be required to control rotational stability.

Minimising tibial fracture after unicompartmental knee replacement: A probabilistic finite element study.

BACKGROUND: Periprosthetic tibial fracture after unicompartmental knee replacement is a challenging post-operative complication. Patients have an increased risk of mortality after fracture, the majority undergo further surgery, and the revision operations are less successful. Inappropriate surgical technique increases the risk of fracture, but it is unclear which technical aspects of the surgery are most problematic and no research has been performed on how surgical factors interact. METHODS: Firstly, this study quantified the typical variance in surgical cuts made during unicompartmental knee replacement (determined from bones prepared by surgeons during an instructional course). Secondly, these measured distributions were used to create a probabilistic finite element model of the tibia after replacement. A thousand finite element models were created using the Monte Carlo method, representing 1000 virtual operations, and the risk of tibial fracture was assessed. FINDINGS: Multivariate linear regression of the results showed that excessive resection depth and making the vertical cut too deep posteriorly increased the risk of fracture. These two parameters also had high variability in the prepared synthetic bones. The regression equation calculated the risk of fracture from three cut parameters (resection depth, vertical and horizonal posterior cuts) and fit the model results with 90% correlation. INTERPRETATION: This study introduces for the first time the application of a probabilistic approach to predict the aetiology of fracture after unicompartmental knee replacement, providing unique insight into the relative importance of surgical saw cut variations. Targeted changes to operative technique can now be considered to seek to reduce the risk of periprosthetic fracture.

FOXO1 and FOXO3 transcription factors have unique functions in meniscus development and homeostasis during aging and osteoarthritis.

The objective of this study was to examine FoxO expression and FoxO function in meniscus. In menisci from human knee joints with osteoarthritis (OA), FoxO1 and 3 expression were significantly reduced compared with normal menisci from young and old normal donors. The expression of FoxO1 and 3 was also significantly reduced in mouse menisci during aging and OA induced by surgical meniscus destabilization or mechanical overuse. Deletion of FoxO1 and combined FoxO1, 3, and 4 deletions induced abnormal postnatal meniscus development in mice and these mutant mice spontaneously displayed meniscus pathology at 6 mo. Mice with Col2Cre-mediated deletion of FoxO3 or FoxO4 had normal meniscus development but had more severe aging-related damage. In mature AcanCreERT2 mice, the deletion of FoxO1, 3, and 4 aggravated meniscus lesions in all experimental OA models. FoxO deletion suppressed autophagy and antioxidant defense genes and altered several meniscus-specific genes. Expression of these genes was modulated by adenoviral FoxO1 in cultured human meniscus cells. These results suggest that FoxO1 plays a key role in meniscus development and maturation, and both FoxO1 and 3 support homeostasis and protect against meniscus damage in response to mechanical overuse and during aging and OA.

Cartilage tissue engineering combining microspheroid building blocks and microneedle arrays.

Purpose: Scaffold-free cartilage tissue engineering circumvents issues with scaffold seeding, potential toxicity response, and impaired host integration. However, precisely controlling and maintaining a scaffold-free construct shape have been challenging. We explored the feasibility of microneedle arrays to print tissue using cellular microspheroids as building blocks.Materials and Methods: Human embryonic-derived mesenchymal stem cells or infrapatellar fat pad mesenchymal stem cells were used to create microspheroids of 500 µm in diameter, which were assembled on microneedle arrays in a predefined arrangement using a robotic system under computer vision. Microspheroids on microneedles were cultured to permit fusion into a tissue construct. Infrapatellar fat pad mesenchymal stem cell constructs were either implanted into chondral defects created in human osteoarthritic cartilage explants or maintained on the microneedle array for 3 weeks. Embryonic-derived mesenchymal stem cell constructs were designed to be press-fit into 3 mm subchondral defects in New Zealand White rabbits and maintained for up to 8 weeks to assess retention, early tissue repair, and more mature cartilage regeneration.Results: Microspheroids of both cell types fused together in culture to form neotissues of predefined shape and size. Infrapatellar fat pad mesenchymal stem cell neotissues expressed high levels of chondrogenic genes and integrated with the surrounding osteoarthritic host cartilage. Embryonic-derived mesenchymal stem cell constructs generated chondrogenic neotissue in vivo as early as 2 weeks and more mature tissue by 8 weeks with increased glycosaminoglycan deposition.Conclusions: We constructed defined scaffold-free shapes by bioprinting and fusing microspheroids. Proof of concept was shown in the repair of ex vivo osteoarthritic human cartilage and in vivo rabbit osteochondral (OC) defects.