RESUMO
There is huge research activity in the development of flexible and biocompatible piezoelectric materials for next-generation compliant micro electro-mechanical systems (MEMS) transducers to be exploited in wearable devices and implants. This work reports for the first time on the development of flexible ScxAl(1-x)N films deposited by sputtering technique onto polyimide substrates, assessing their piezoelectricity and biocompatibility. Flexible ScxAl(1-x)N films have been analyzed in terms of morphological, structural, and piezoelectric properties. ScxAl(1-x)N layer exhibits a good surface roughness of 4.40 nm and moderate piezoelectricity with an extracted effective piezoelectric coefficient (d33eff) value of 1.87 ± 0.06 pm/V, in good agreement with the diffraction pattern analysis results. Cell viability assay, performed to study the interaction of the ScxAl(1-x)N films with human cell lines, shows that this material does not have significant effects on tested cells. Furthermore, the ScxAl(1-x)N layer, integrated onto a flexible device and analyzed by bending/unbending measurements, shows a peak-to-peak open-circuit voltage (VOC) of 0.32 V and a short-circuit current (ISC) of 0.27 µA, with a generated power of 19.28 nW under optimal resistive load, thus demonstrating the potential of flexible ScxAl(1-x)N films as active layers for next-generation wearable/implantable piezoelectrics.