Degradation of Levofloxacin by a green zero-valent iron-loaded carbon composite activating peroxydisulfate system: Reactivity, products and mechanism.

In this study, a green zero-valent iron-loaded carbon composite (ZVI-SCG) was synthesized using coffee grounds and FeCl3 solution through two-steps method, and the synthesized ZVI-SCG was used in the activation of peroxydisulfate (PDS) to degrade Levofloxacin (LEX). Results revealed that ZVI-SCG exhibited a great potential for LEX removal by adsorption and catalytic degradation in the ZVI-SCG/PDS system, and 99% of LEX was removed in the ZVI-SCG/PDS system within 60 min. ZVI-SCG/PDS system showed a high reactivity toward LEX degradation under realistic environmental conditions. Also, the ZVI-SCG/PDS system could effectively degrade several quinolone antibiotics including gatifloxacin, ciprofloxacin and LEX in single and simultaneous removal modes. A potential reaction mechanism of LEX degradation by ZVI-SCG/PDS system was proposed, SO4•-, HO•, O2•- and 1O2 involved in radical and non-radical pathways took part in catalytic degradation of LEX by ZVI-SCG/PDS system, but HO• might be the main reactive species for LEX degradation. The possible degradation pathway of LEX was also proposed based on the identified ten intermediate products, LEX degradation was successfully achieved through decarboxylation, opening ring and hydroxylation processes. The potential toxicity of LEX and its oxidation products decreased significantly after treatment. This study provides a promising strategy of water treatment for the antibiotics-containing wastewater.

A green synthesized medicine residue carbon-based iron composite for the removal of chromium (VI) and cadmium (II): Performance, kinetics and mechanism.

Nowadays, clean-up of heavy metals from wastewaters using waste residue carbon-based material has received increasing attention. In this work, a novel Chinese medicine residue carbon-based nano zero-valent iron composite (CM-nZVI) had been successfully prepared using the combined Chinese medicine residue, FeCl3 and green tea extract. Cr(VI) and/ or Cd(II) removal in water by the CM-nZVI were systematacially investigated with a series of batch experiments. The most relevant findings indicated the adsorption efficiecy and capacity of Cr(VI) by CM-nZVI were respecitvely nearly 98% and 26 mg/g under optimized reaction conditions. The negative influences of the cations on the Cr(VI) removal followed the order of Al3+ > Ca2+ > Mg2+ Na+ > K+, but the anions followed the order of HCO3- > PO43- > NO3- > Cl- > SO42-. Humic acid (HA) and ionic strength with high concentrations severely inhibited Cr(VI) removal. The Cr(VI) adsorption on CM-nZVI fitted well by the pseudo-second-order kinetic and Langmuir models. A monolayer endothermic chemisorption occurred on Cr(VI) adsorption over CM-nZVI, and Cr(VI) removal by CM-nZVI primarily involved in the absorption, reduction, precipitation and complexation processes. Both Cr(VI) and Cd(II) removals had been achieved by CM-nZVI at their low concentrations. This CM-nZVI showed a better reusability proprity for Cr(VI) and Cd(II) removal with the regeneration of CM-nZVI through simple pickling. The outcomes of this work show that CM-nZVI could be used an effective material for heavy metals removal from water.

A porous biochar supported nanoscale zero-valent iron material highly efficient for the simultaneous remediation of cadmium and lead contaminated soil.

Risk associated with heavy metals in soil has been received widespread attention. In this study, a porous biochar supported nanoscale zero-valent iron (BC-nZVI) was applied to immobilize cadmium (Cd) and lead (Pb) in clayey soil. Experiment results indicated that the immobilization of Cd or Pb by BC-nZVI process was better than that of BC or nZVI process, and about 80% of heavy metals immobilization was obtained in BC-nZVI process. Addition of BC-nZVI could increase soil pH and organic matter (SOM). Cd or Pb immobilization was inhibited with coexisting organic compound 2,4-dichlorophenol (2,4-DCP), but 2,4-DCP could be removed in a simultaneous manner with Cd or Pb immobilization at low concentration levels. Simultaneous immobilization of Cd and Pb was achieved in BC-nZVI process, and both Cd and Pb availability significantly decreased. Stable Cd species inculding Cd(OH)2, CdCO3 and CdO were formed, whereas stable Pb species such as PbCO3, PbO and Pb(OH)2 were produced with BC-nZVI treatment. Simultaneous immobilization mechanism of Cd and Pb in soil by BC-nZVI was thereby proposed. This study well demonstrates that BC-nZVI has been emerged as a potential technology for the remediation of multiple heavy metals in soil.

Application of Zinc and Iron-Based Fertilizers Improves the Growth Attributes, Productivity, and Grain Quality of Two Wheat (Triticum aestivum) Cultivars.

Field-based experiments were conducted during wheat cultivation seasons of 2017-2018 and 2018-2019 to minimize the impact of hidden hunger (micronutrient deficiencies) through agronomic biofortification of two wheat cultivars with zinc and iron. Two spring-planted bread wheat cultivars: Zincol-16 (Zn-efficient) and Anaj-17 (Zn-inefficient with high-yield potential) were treated with either zinc (10 kg/ha), iron (12 kg/ha), or their combination to study their effect on some growth attributes (plant height, tillers, and spike length, etc.,), productivity, and quality. No application of zinc and iron or their combinations served as the control. Maximum Zn and Fe contents of grains were improved by sole application of Zn and Fe, respectively. A higher concentration of Ca in grains was observed by the combined application of Zn and Fe. Starch contents were found maximum by sole application of Fe. Sole or combined application of Zn and Fe reduced wet gluten contents. Maximum proteins were recorded in Anaj-17 under control treatments. Zincol-16 produced maximum ionic concentration, starch contents, and wet gluten as compared to Anaj-17. Yield and growth attributes were also significantly (p < 0.05) improved by combined application as compared to the sole application of Zn or Fe. The combined application also produced the highest biological and grain yield with a maximum harvest index. Cultivar Anaj-17 was found more responsive regarding growth and yield attributes comparatively. The findings of the present study showed that the combined application of Zn and Fe produced good quality grains (more Zn, Fe, Ca, starch, and less gluten concentrations) with a maximum productivity of bread wheat cultivars.

Simultaneous adsorption of Cr(VI) and phenol by biochar-based iron oxide composites in water: Performance, kinetics and mechanism.

The pollution of heavy metals and organic compounds has received increased attention in recent years. In the current study, a novel biochar-based iron oxide composite (FeYBC) was successfully synthesized using pomelo peel and ferric chloride solution through one-step process at moderate temperature. Results clearly demonstrate that FeYBC exhibited more efficient removal of Cr(VI) and/or phenol compared with the pristine biochar, and the maximum adsorption amounts of Cr(VI) and phenol by FeYBC could reach 24.37 and 39.32 mg g-1, respectively. A series of characterization data suggests that several iron oxides such as Fe2O3, Fe0, FeOOH and Fe3O4 were formed on the FeYBC surface as well as oxygen-containing groups. Thermodynamics study indicates that Cr(VI) and phenol adsorption by FeYBC were endothermic and exothermic processes, respectively. Langmuir adsorption isotherm and pseudo-second order models could better explain the Cr(VI) and phenol adsorption behaviors over FeYBC. The Cr(VI) adsorption might be primarily achieved through the ion exchange and surface complexation and reduction, whereas the π-π interaction and electron donor-acceptor complex mainly contributed to phenol adsorption. The findings indicate that the biochar-based iron oxide composites material was an efficient adsorbent for the remediation of industrial effluents containing Cr(VI) and phenol.

Insights on the nitrate reduction and norfloxacin oxidation over a novel nanoscale zero valent iron particle: Reactivity, products, and mechanism.

Herein, the application of a novel acid mine drainage-based nanoscale zero valent iron (AMD-based nZVI) for the remediation of nitrate and norfloxacin (NOR) was studied. Experimental results indicated that the catalytic reactivity of AMD-based nZVI toward nitrate reduction was superior to that of iron salt-based nanoscale zero valent iron (Iron salt-based nZVI). The presence of ultrasound irradiation could significantly enhance the reactivity toward both the nitrate reduction and NOR oxidation processes. The optimal efficiencies of nitrate and NOR by AMD-based nZVI/US process could be kept 96 and 94% within 120 min, respectively. Ammonia was identified as a major product in nitrate reduction process, while three oxidation products were observed in NOR degradation process. Both reduction reaction of nitrate from AMD-based nZVI and oxidation reaction of NOR from US-assisted Fenton system might be involved in AMD-based nZVI/US process. The AMD-based nZVI/US process showed a better performance on the removal of NOR compared with that of nitrate. The findings of the present work could be as a guide and show that AMD-based nZVI/US process is feasible for the remediation of both nitrate and NOR in real wastewater.

Insights into the simultaneous removal of Cr6+ and Pb2+ by a novel sewage sludge-derived biochar immobilized nanoscale zero valent iron: Coexistence effect and mechanism.

Cr6+ and Pb2+ are both highly toxic pollutants and commonly co-exist in some industrial effluents and contaminated waters. In this study, simultaneous removal of Cr6+ and Pb2+ by a novel sewage sludge-derived biochar immobilized nanoscale zero-valent iron (SSB-nZVI) was systematically investigated. It was well demonstrated that a porous structure was successfully formed on the SSB-nZVI when the starch was used as an additive. A synergistic effect on the adsorption and reduction over the SSB-nZVI was achieved, resulting in nearly 90 and 82% of Cr6+ and Pb2+ removal within 30 min, respectively. Cr6+ was reduced prior to Pb2+. A low pH could accelerate the corrosion of nZVI as well as phosphate leaching. When Malachite green was added as a coexisting organic pollutant, its effective removal was found due to the formation of a Fenton-like system. The SSB-nZVI could be run consecutively three times with a relatively satisfactory performance. Most of Cr6+ was converted into Cr2O3 and Cr(OH)3 on the SSB-nZVI surface, whereas most of Pb2+ species existed as Pb(OH)2 (or PbO). A possible reaction mechanism on the SSB-nZVI involved the adsorption, reduction and precipitation of both Cr6+ and Pb2+ over the particles. Present study sheds light on the insight of the fate and transport of Cr6+ and Pb2+ in aquatic environment, as well provides helpful guide for the remediation of coexistence of pollutants in real applications.

Simultaneous removal of Cu2+ and bisphenol A by a novel biochar-supported zero valent iron from aqueous solution: Synthesis, reactivity and mechanism.

In this study, a novel biochar-supported zero valent iron (BC-nZVI) was synthesized through a green method. A high performance on the simultaneous removal of Cu2+ and bisphenol A (BPA) by a combination of BC-nZVI with persulfate (BC-nZVI/PS) system was successfully achieved. The simultaneous efficiencies of Cu2+ and BPA could reach 96 and 98% within 60 min, respectively. Both HO• and SO4•- were two major reactive species in BC-nZVI/PS system, and SO4•- was primary radical responsible for the degradation of BPA. Four kinds of Cu species, such as Cu(OH)2, CuO, Cu2O and Cu0 were generated via the adsorption and reduction of the BC-nZVI, whereas six kinds of products of BPA including p-isopropenyl phenol and 4-isopropylphenol were generated via the combined oxidation of SO4•- and HO•. The possible reaction mechanism for the simultaneous removal of Cu2+ and BPA by BC-nZVI/PS system contained a synergistic effect between the reduction of Cu2+ and the oxidation of BPA. This is the first report on the feasibility of the remediation of coexistence of heavy metal and organic compound in aquatic environment using the BC-nZVI/PS system.

Simultaneous removal of Cr(VI) and phenol by persulfate activated with bentonite-supported nanoscale zero-valent iron: Reactivity and mechanism.

The applicability of bentonite-supported nanoscale zero-valent iron (B-nZVI) as a catalyst to activate persulfate (PS) for the simultaneous removal of Cr(VI) and phenol was systematically investigated in this study. Experimental results demonstrated that phenol degradation was significantly enhanced under acidic condition and with oxygen supply, whereas the Cr(VI) reduction was not obviously declined. The removal efficiencies of Cr(VI) and phenol in B-nZVI/PS combined system were 99.8 and 72.3%, respectively. Cr(VI) reduction and phenol oxidation was simultaneously achieved in B-nZVI/PS combined system, which provided a promising environmental treatment for industrial wastewater containing metal ions and organic compounds. An acidic condition was more favorable to the decomposition of persulfate for the production of sulfate radicals. Radical scavenging tests revealed that the predominant reactive oxygen species for phenol degradation was SO4(-), neither HO nor O2(-). A reaction mechanism, which involves the Cr(VI) removal mainly by the reduction of nZVI and the degradation of phenol mainly by the SO4(-) from the decomposition of persulfate, was proposed. These findings revealed that B-nZVI/PS combined system has a potential in the environmental remediation polluted jointly by organic compounds and/or heavy metals.