Analysis of postoperative complications 5 years after osteosynthesis of patella fractures-a retrospective, multicenter cohort study.

PURPOSE: The study aims to investigate the influence of patient- and fracture-specific factors on the occurrence of complications after osteosynthesis of patella fractures and to compare knee joint function, activity, and subjective pain levels after a regular postoperative course and after complications in the medium term. METHODS: This retrospective, multicenter cohort study examined patients who received surgery for patella fracture at level 1 trauma centers between 2013 and 2018. Patient demographics and fracture-specific variables were evaluated. Final follow-up assessments included patient-reported pain scores (NRS), subjective activity and knee function scores (Tegner Activity Scale, Lysholm score, IKDC score), complications, and revisions. RESULTS: A total of 243 patients with a mean follow-up of 63.4 ± 21.3 months were included. Among them, 66.9% of patients underwent tension band wiring (TBW), 19.0% received locking plate osteosynthesis (LPO), and 14.1% underwent screw osteosynthesis (SO). A total of 38 patients (15.6%) experienced complications (TBW: 16.7%; LPO: 15.2%; SO: 11.8%). Implant-related complications of atraumatic fragment dislocation and material insufficiency/dislocation, accounted for 50% of all complications, were significantly more common after TBW than LPO (p = 0.015). No patient-specific factor was identified as a general cause for increased complications. Overall, particularly following complications such as limited range of motion or traumatic refracture, functional knee scores were significantly lower and pain levels were significantly higher at the final follow-up when a complication occurred. Implant-related complications, however, achieved functional scores comparable to a regular postoperative course without complications after revision surgery. CONCLUSION: The present study demonstrated that implant-related complications occurred significantly more often after TBW compared to LPO. The complication rates were similar in all groups.

S2k Guideline for Tibial Plateau Fractures - Classification, Diagnosis, and Treatment. / S2k-Leitlinie Tibiakopffraktur ­ Klassifikation, Diagnostik und Therapie.

Tibial plateau fractures are mostly complex and surgically demanding joint fractures, which require a comprehensive understanding of the fracture morphology, ligamentous and neurovascular injuries, as well as the diagnostic and therapeutic options for an optimal clinical outcome. Therefore, a standardised and structured approach is required. The success of the treatment of tibial plateau fractures relies on the interdisciplinary cooperation between surgical and conservative physicians in an outpatient and inpatient setting, physical therapists, patients and service providers (health insurance companies, statutory accident insurance, pension providers). On behalf of the German Society for Orthopaedics and Trauma Surgery (DGOU), the German Trauma Society (DGU) and the Society for Arthroscopy and Joint Surgery (AGA), under the leadership of the Fracture Committee of the German Knee Society (DKG), a guideline for tibial plateau fractures was created, which was developed in several voting rounds as part of a Delphi process. Based on the current literature, this guideline is intended to make clear recommendations and outline the most important treatment steps in diagnostics, therapy and follow-up treatment. Additionally, 25 statements were revised by the authors in several survey rounds using the Likert scale in order to reach a final consensus.

Age-Related Changes in the Microvascular Density of the Human Meniscus.

BACKGROUND: The microvascular anatomy of the meniscus of the human knee is regarded as a crucial factor in the injury response. Previous studies have investigated the zone-dependent distribution pattern, but no quantitative data exist on vascular density and its age-related changes. HYPOTHESIS/PURPOSE: The aim of the present study was to histologically analyze the vascular anatomy of the meniscus as a function of age. It was hypothesized that vascular density would decrease with increasing age. STUDY DESIGN: Descriptive laboratory study. METHODS: Human menisci were retrieved from patients who underwent tumor resection or who received total knee replacement because of osteoarthritis. A total of 51 menisci were collected from 28 patients over 9 years (mean age, 25.6 ± 20.4 years; range 3-79 years). Immunohistological staining (alpha-smooth muscle actin) in combination with serial sections and standardized software-based contrast detection were used for the quantitative analysis. Data were analyzed using multiple t tests and the analysis of variance for trends, with a statistical significance level of P < .05. RESULTS: The overall vascular density in the meniscus was lower in the 61- to 80-year age group than in the age groups of 0 to 10, 11 to 20, and 21 to 30 years (P < .01). A negative linear trend was detected with increasing age (slope, -0.007; P = .016). Within the red-white (RW) zone, a low vessel density was detected for the age groups of 0 to 10 and 11 to 20 years. Beyond these age groups, no vasculature was found in the RW zone. For the white-white (WW) zone, no vessel formations were noted in any age group. Almost 95% of the vessels in the meniscus were located in the capsule. CONCLUSION: This study reports quantitative histological data for microvascular anatomy as a function of age in a broad cohort of human knee menisci. The overall vascular density decreased with increasing age. No vessel formations were detected in the RW and WW zones after adolescence. Additionally, the capsule is far more densely vascularized than any other part of the meniscus. CLINICAL RELEVANCE: Vascular density might be an additional factor to consider, along with tear location and patient age, for future treatment options.

Medial collateral ligament reconstruction graft isometry is effected by femoral position more than tibial position.

PURPOSE: The purpose of this study was to examine the length change patterns of the native medial structures of the knee and determine the effect on graft length change patterns for different tibial and femoral attachment points for previously described medial reconstructions. METHODS: Eight cadaveric knee specimens were prepared by removing the skin and subcutaneous fat. The sartorius fascia was divided to allow clear identification of the medial ligamentous structures. Knees were then mounted in a custom-made rig and the quadriceps muscle and the iliotibial tract were loaded, using cables and hanging weights. Threads were mounted between tibial and femoral pins positioned in the anterior, middle, and posterior parts of the attachment sites of the native superficial medial collateral ligament (sMCL) and posterior oblique ligament (POL). Pins were also placed at the attachment sites relating to two commonly used medial reconstructions (Bosworth/Lind and LaPrade). Length changes between the tibiofemoral pin combinations were measured using a rotary encoder as the knee was flexed through an arc of 0-120°. RESULTS: With knee flexion, the anterior fibres of the sMCL tightened (increased in length 7.4% ± 2.9%) whilst the posterior fibres slackened (decreased in length 8.3% ± 3.1%). All fibre regions of the POL displayed a uniform lengthening of approximately 25% between 0 and 120° knee flexion. The most isometric tibiofemoral combination was between pins placed representing the middle fibres of the sMCL (Length change = 5.4% ± 2.1% with knee flexion). The simulated sMCL reconstruction that produced the least length change was the Lind/Bosworth reconstruction with the tibial attachment at the insertion of the semitendinosus and the femoral attachment in the posterior part of the native sMCL attachment side (5.4 ± 2.2%). This appeared more isometric than using the attachment positions described for the LaPrade reconstruction (10.0 ± 4.8%). CONCLUSION: The complex behaviour of the native MCL could not be imitated by a single point-to-point combination and surgeons should be aware that small changes in the femoral MCL graft attachment position will significantly effect graft length change patterns. Reconstructing the sMCL with a semitendinosus autograft, left attached distally to its tibial insertion, would appear to have a minimal effect on length change compared to detaching it and using the native tibial attachment site. A POL graft must always be tensioned near extension to avoid capturing the knee or graft failure.

Trends in arthrodeses and total joint replacements in Foot and Ankle surgery in Germany during the past decade-Back to the fusion?

BACKGROUND: The goal of this study was to analyze trends in Foot and Ankle surgery in Germany during the past ten years. METHODS: Data of the German Federal Statistical Office from 2008 until 2018 were screened. We focused on the analysis of fusions and total joint replacements. RESULTS: The total amount of the surgeries increased (+39.5%). Especially fusions like arthrodesis of the ankle (+31%) and of the MTP-1 joint (+77%) were on the rise. In 2017 60% of ankle arthrodesis were conducted in men, while 69% of MTP-1 arthrodesis were performed in women. The amount of joint replacements showed a decline during the last decade, in TAR (-39%) and in the MTP-1 (-48%). Regarding the patients age while undergoing a TAR, we observed a shift of the peak age group from 65 to 70 years in 2008 towards 55-60 years in 2017. CONCLUSION: Our study represents actual health care reality in Germany and shows a constant increase of ankle arthritis surgeries in the last decade, while there was a massive shift regarding the ratio of TAR in favour of fusion procedures.

The Popliteus Bypass provides superior biomechanical properties compared to the Larson technique in the reconstruction of combined posterolateral corner and posterior cruciate ligament injury.

PURPOSE: This study aimed to compare the biomechanical properties of the popliteus bypass against the Larson technique for the reconstruction of a combined posterolateral corner and posterior cruciate ligament injury. METHODS: In 18 human cadaver knees, the kinematics for 134 N posterior loads, 10 Nm varus loads, and 5 Nm external rotational loads in 0°, 20°, 30°, 60,° and 90° of knee flexion were measured using a robotic and optical tracking system. The (1) posterior cruciate ligament, (2) meniscofibular/-tibial fibers, (3) popliteofibular ligament (PFL), (4) popliteotibial fascicle, (5) popliteus tendon, and (6) lateral collateral ligament were cut, and the measurements were repeated. The knees underwent posterior cruciate ligament reconstruction, and were randomized into two groups. Group PB (Popliteus Bypass; n = 9) underwent a lateral collateral ligament and popliteus bypass reconstruction and was compared to Group FS (Fibular Sling; n = 9) which underwent the Larson technique. RESULTS: Varus angulation, posterior translation, and external rotation increased after dissection (p < 0.01). The varus angulation was effectively reduced in both groups and did not significantly differ from the intact knee. No significant differences were found between the groups. Posterior translation was reduced by both techniques (p < 0.01), but none of the groups had restored stability to the intact state (p < 0.02), with the exception of group PB at 0°. No significant differences were found between the two groups. The two techniques revealed major differences in their abilities to reduce external rotational instability. Group PB had less external rotational instability compared to Group FS (p < 0.03). Only Group PB had restored rotational instability compared to the state of the intact knee (p < 0.04) at all degrees of flexion. CONCLUSION: The popliteus bypass for posterolateral reconstruction has superior biomechanical properties related to external rotational stability compared to the Larson technique. Therefore, the popliteus bypass may have a positive influence on the clinical outcome. This needs to be proven through clinical trials.

[Current treatment standard for patella fractures in Germany]. / Aktueller Versorgungsstandard von Patellafrakturen in Deutschland.

BACKGROUND: The treatment of patella fractures is technically demanding. Although the radiological results are mostly satisfactory, this often does not correspond to the subjective assessment of the patients. The classical treatment with tension band wiring with K­wires has several complications. Fixed-angle plate osteosynthesis seems to be biomechanically advantageous. OBJECTIVE: Who is treating patella fractures in Germany? What is the current standard of treatment? Have modern forms of osteosynthesis become established? What are the most important complications? MATERIAL AND METHODS: The members of the German Society for Orthopedics and Trauma Surgery and the German Knee Society were asked to participate in an online survey. RESULTS: A total of 511 completed questionnaires were evaluated. Most of the respondents are specialized in trauma surgery (51.5%), have many years of professional experience and work in trauma centers. Of the surgeons 50% treat ≤5 patella fractures annually. In almost 40% of the cases preoperative imaging is supplemented by computed tomography. The classical tension band wiring with K­wires is still the preferred form of osteosynthesis for all types of fractures (transverse fractures 52%, comminuted fractures 40%). In the case of comminuted fractures 30% of the surgeons choose fixed-angle plate osteosynthesis. If the inferior pole is involved a McLaughlin cerclage is used for additional protection in 60% of the cases. DISCUSSION: The standard of care for patella fractures in Germany largely corresponds to the updated S2e guidelines. Tension band wiring is still the treatment of choice. Further (long-term) clinical studies are needed to verify the advantages of fixed-angle plates.

Bone metabolism is a key factor for clinical outcome of tibial plateau fractures.

PURPOSE: Given that tibial plateau fractures (TPF) are rare, they may pose a challenge to the treating surgeon due to their variety of complex fracture patterns. Numerous studies have identified potential fracture-specific, surgery-related, and patient-related risk factors for impaired patient outcomes. However, reports on the influence of bone metabolism on functional outcomes are missing. METHODS: In a retrospective multicenter cohort study, 122 TPF of 121 patients were analyzed with respect to radiological and clinical outcomes (Rasmussen) with a mean follow-up of 35.7 ± 24.9 months. The risk factor assessment included bone metabolism-affecting comorbidities and medication. RESULTS: The findings showed that 95.9% of the patients reported a good-to-excellent clinical outcome, and 97.4% reported a good-to-excellent radiological outcome. Logistic regression revealed that potentially impaired bone metabolism (IBM) was an independent risk factor for the clinical (p = 0.016) but not the radiological outcome (Table 4). Patients with 41-type B fractures and a potential IBM had a seven times higher risk to present a fair-to-poor clinical outcome [OR 7.45, 95 CI (4.30, 12.92)]. The most common objective impairment was a limited range of motion in 16.4% of the patients, especially in 41-type C fractures (p = 0.06). The individual failure analysis additionally identified surgery-related options for improvement. CONCLUSION: This study demonstrated that potential IBM was an independent risk factor for a poor-to-fair clinical outcome.

Soft Tissue Fixation Strategies of Human Quadriceps Tendon Grafts: A Biomechanical Study.

PURPOSE: To evaluate the effects of different stitching methods and suture diameters on the graft fixation of soft tissue human quadriceps tendon grafts for anterior cruciate ligament (ACL) reconstruction. METHODS: The Krackow locking stitch (K), whipstitch (W), and baseball stitch (B) were combined with either a 2× no. 2 (#2) or a 1× no. 5 (#5) braided composite suture for graft fixation of 36 human quadriceps tendons in 6 groups. Biomechanical testing was performed using a cyclic protocol with loads between 0 and 100 N. The maximum load until failure, cyclic elongation, and failure mode were recorded. RESULTS: The highest mean maximum load to failure was observed in the 2 Krackow stitch groups. The K#2 group had significantly higher load to failure values compared with those of the W#2 and B#2 groups (K#2, 553 ± 82 N vs W#2, 392 ± 107 N, P = .0349; K#2 vs B#2 366 ± 118 N, P = .0129). The mean cyclic elongation was lowest in the Krackow groups (K#2, 10.59 ± 2.63 mm; K#5, 13.66 ± 2.3 mm). The regular failure mode was the rupture of the suture for the Krackow stitch (8 of 12) and suture pullout for the whipstitch (11 of 12) and baseball stitch groups (12 of 12). CONCLUSIONS: The double Krackow stitch with no. 2 braided composite suture exhibits a high maximum load to failure combined with a low amount of elongation in a biomechanical study for human quadriceps tendon soft tissue graft fixation. Unlike the whipstitch and the baseball stitch, it can solidly prevent suture pullout. CLINICAL RELEVANCE: A safe soft tissue graft fixation technique is especially important for quadriceps tendon grafts with their laminar anatomical structure and physiologically varying diameter. Unlike other grafts for ACL replacement, it fully relies on the soft tissue suture fixation to resist the pullout force.

Changes in gait pattern and early functional results after ACL repair are comparable to those of ACL reconstruction.

PURPOSE: Dynamic intraligamentary stabilization (DIS) has been introduced as a new technique to repair the torn anterior cruciate ligament (ACL) and to restore knee joint kinematics after an acute ACL tear. Aim of the present study was to compare the early post-operative activity, restoration of gait pattern and functional results after DIS in comparison with primary ACL reconstruction (ACLR) for acute ACL tears. It was hypothesized that functional results, post-operative activity and changes in gait pattern after DIS are comparable to those after ACLR. METHODS: Sixty patients with acute ACL tears were included in this study and underwent either DIS or ACLR with an anatomic semitendinosus autograft in a randomized manner. Patients were equipped with an accelerometric step counter for the first 6 weeks after surgery in order to monitor their early post-operative activity. 3D gait analysis was performed at 6 weeks and 6 months after surgery. Temporal-spatial, kinematic and kinetic parameters were extracted and averaged for each subject. Functional results were recorded at 6 weeks, 6 months and 12 months after surgery using the Tegner activity scale, International Knee Documentation Committee score and Lysholm score. RESULTS: Patients who underwent DIS showed an increased early post-operative activity with significant differences at week 2 and 3 (p = 0.0241 and 0.0220). No significant differences between groups were found for knee kinematic and kinetic parameters or the functional scores at any time of the follow-up. Furthermore, the difference in anterior tibial translation was not significantly different between the two groups (n.s.). CONCLUSION: Early functional results and changes in gait pattern after DIS are comparable to those of primary ACLR. Therefore, ACL repair may be an alternative to ACLR in this cohort of patients. LEVEL OF EVIDENCE: I.

Kinematics of Different Components of the Posterolateral Corner of the Knee in the Lateral Collateral Ligament-intact State: A Human Cadaveric Study.

PURPOSE: To determine the static stabilizing effects of different anatomical structures of the posterolateral corner (PLC) of the knee in the lateral collateral ligament (LCL)-intact state. METHODS: Thirteen fresh-frozen human cadaveric knees were dissected and tested using an industrial robot with an optical tracking system. Kinematics were determined for 134 N anterior/posterior loads, 10 N m valgus/varus loads, and 5 N m internal/external rotatory loads in 0°, 20°, 30°, 60°, and 90° of knee flexion. The PLC structures were dissected and consecutively released: (I) intact knee joint, (II) with released posterior cruciate ligament (PCL), (III) popliteomeniscal fibers, (IV) popliteofibular ligament, (V) arcuat and popliteotibial fibers, (VI) popliteus tendon (PLT), and (VII) LCL. Repeated-measures analysis of variance was performed with significance set at P < .05. RESULTS: After releasing the PCL, posterior tibial translation increased by 5.2 mm at 20° to 9.4 mm at 90° of joint flexion (P < .0001). A mild 1.8° varus instability was measured in 0° of flexion (P = .0017). After releasing the PLC structures, posterior tibial translation further increased by 2.9 mm at 20° to 5.9 mm at 90° of flexion (P < .05) and external rotation angle increased by 2.6° at 0° to 7.9° at 90° of flexion (P < .05, vs II). Varus stability did not decrease. Mild differences between states V and VI were found in 60° and 90° external rotation tests (2.1° and 3.1°; P < .05). CONCLUSIONS: The connecting ligaments/fibers to the PLT act as a primary static stabilizer against external rotatory loads and a secondary stabilizer against posterior tibial loads (when PCL is injured). After releasing these structures, most static stabilizing function of the intact PLT is lost. The PLC has no varus-stabilizing function in the LCL-intact knee. CLINICAL RELEVANCE: Anatomy and function of these structures for primary and secondary joint stability should be considered for clinical diagnostics and when performing surgery in the PLC.

Trends and incidences of ligament-surgeries and osteotomies of the knee: an analysis of German inpatient records 2005-2013.

INTRODUCTION: In Germany most surgical procedures of the ligaments of the knee and correcting osteotomies of the knees are performed within an inpatient setting. The purpose of this study was to analyze the available data to assess epidemiological trends and incidences in inpatient knee joint surgery. MATERIALS AND METHODS: Approximately 154 million anonymized DRG inpatient records were collected by the German Federal Statistical Office between 2005 and 2013. These data were screened and analyzed for knee joint surgical ligamental procedures and osteotomies. RESULTS: Anterior cruciate ligament reconstruction (ACLR) or repair had a high incidence (46 per 100,000 persons/year). In addition, the most frequent grafts included hamstring tendon (90%) and the patellar tendon (6.3%) autografts (2013). Peak age group for ACLR was 15-20 years (14.5%) for female and 20-25 years (23.6%) for male patients, while there was a second peak in the age group 45-50 years (13.8%) for female patients. Male patients had a higher risk for receiving ACLR (RR 1.96; 95% CI 1.92-2.00) and for receiving valgizing high tibial osteotomy (RR 2.43; 95% CI 2.27-2.61). Females had a higher risk for receiving varizing distal femur osteotomy (RR 1.89; 95% CI 1.58-2.26). CONCLUSION: There are growing trends for joint- and activity-preserving procedure in the middle-aged patients. The knowledge of the trends and incidences related to these procedures may help to validate and discuss the results of clinical and register studies.

Anterior Cruciate Ligament Soft Tissue Graft Fixation in the Elderly: Is There a Reason to Use Interference Screws? A Human Cadaver Study.

PURPOSE: To analyze the ultimate failure load, yield load, stiffness, and cyclic resistance of different anterior cruciate ligament (ACL) soft tissue graft fixation techniques in osteopenic bone. METHODS: In this study, 24 fresh-frozen human cadaveric tibiae (mean age 82.6 years; range 56-96; 6 male and 6 female donors) were used. Quantitative computed tomography was performed to match bone density. Looped porcine flexor tendon grafts were chosen as ACL graft substitutes for tibial graft fixation techniques (n = 8 each): (1) hybrid fixation with an interference screw and extracortical button fixation; (2) extracortical button fixation; and (3) interference screw fixation. In single cycle mode, constructs were loaded to failure to evaluate stiffness, yield load, and maximum load. In cyclic testing, 2,000 cycles (25-100 N) were applied followed by loading to failure. A 1-way analysis of variance was performed with significance set at P = .05. RESULTS: Hybrid fixation resulted in significantly higher yield load (283.4 ± 86.19 N; P = .0037) and maximum load (407.9 ± 102.3 N; P = .0026) than interference screw fixation (yield load 176.4 ± 26.03, max load 231.8 ± 94.06 N) in elderly bone. Yield load after extracortical button fixation (252.9 ± 41.97 N; P = .0286) was also higher than that after interference screw fixation, but stiffness (18.98 ± 9.154 N/mm; P = .0041) was less than that after hybrid fixation (37.28 ± 13.53 N/mm). Of 8 specimens in the interference screw group, 7 did not survive 2,000 cycles and failed by graft slippage, whereas all other specimens in both other groups survived. CONCLUSIONS: Tibial hybrid fixation of ACL soft tissue grafts provides less vertical graft movement than extracortical button fixation and higher primary failure loads than interference screw fixation in elderly bone. CLINICAL RELEVANCE: In this elderly human joint in vitro model, tibial hybrid fixation provides biomechanical advantages over other techniques. Graft fixation with only an interference screw should be avoided in osteopenic bone.

Knee joint kinematics after dynamic intraligamentary stabilization: cadaveric study on a novel anterior cruciate ligament repair technique.

PURPOSE: Dynamic intraligamentary stabilization (DIS) has been introduced for the repair of acute anterior cruciate ligament (ACL) tears as an alternative to delayed reconstruction. The aim of the present study was to compare knee joint kinematics after DIS to those of the ACL-intact and ACL-deficient knee under simulated Lachman/KT-1000 and pivot-shift tests. We hypothesized that DIS provides knee joint kinematics equivalent to an intact ACL. METHODS: With the use of a robotic knee simulator, knee kinematics were determined in simulated Lachman/KT-1000 and pivot-shift tests at 0°, 15°, 30°, 60°, and 90° of flexion in eight cadaveric knees under the following conditions: (1) intact ACL, (2) ACL deficiency, (3) DIS with a preload of 60 N, and (4) DIS with a preload of 80 N. Statistical analyses were performed using two-factor repeated-measures analysis of variance. The significance level was set at a p value of <0.05. RESULTS: After DIS with a preload of either 60 N or 80 N, the anterior translation was significantly reduced in the simulated Lachman/KT-1000 and pivot-shift tests when compared to the ACL-deficient knee (p < 0.05). No significant differences were observed between the DIS reconstruction with a preload of 80 N and the intact ACL with regard to anterior laxity in either test. However, DIS with a preload of only 60 N was not able to restore knee joint kinematics to that of an intact knee in all degrees of flexion. CONCLUSION: DIS with a preload of 80 N restores knee joint kinematics comparable to that of an ACL-intact knee and is therefore capable of providing knee joint stability during ACL healing. DIS therefore provides a new technique for primary ACL repair with superior biomechanical properties in comparison with other techniques that have been described previously, although further clinical studies are required to determine its usefulness in clinical settings.

Should the Ipsilateral Hamstrings Be Used for Anterior Cruciate Ligament Reconstruction in the Case of Medial Collateral Ligament Insufficiency? Biomechanical Investigation Regarding Dynamic Stabilization of the Medial Compartment by the Hamstring Muscles.

BACKGROUND: Semitendinosus and gracilis muscles are frequently harvested for autologous tendon grafts for cruciate ligament reconstruction. This study investigated the joint-stabilizing effects of these hamstring muscles in cases of insufficiency of the medial collateral ligament (MCL). HYPOTHESES: First, both the semitendinosus and gracilis muscles can actively stabilize the joint against valgus moments in the MCL-deficient knee. Second, the stabilizing influence of these muscles decreases with an increasing knee flexion angle. STUDY DESIGN: Controlled laboratory study. METHODS: The kinematics was examined in 10 fresh-frozen human cadaveric knees using a robotic/universal force moment sensor system and an optical tracking system. The knee kinematics under 5- and 10-N·m valgus moments were determined in the different flexion angles of the (1) MCL-intact and (2) MCL-deficient knee using the following simulated muscle loads: (1) 0-N (idle) load, (2) 200-N semitendinosus (ST) load, and (3) 280-N (200/80-N) combined semitendinosus/gracilis (STGT) load. RESULTS: Cutting the MCL increased the valgus angle under all tested conditions and angles compared with the MCL-intact knee by 4.3° to 8.1° for the 5-N·m valgus moment and 6.5° to 11.9° for the 10-N·m valgus moment ( P < .01). The applied 200-N simulated ST load reduced the valgus angle significantly at 0°, 10°, 20°, and 30° of flexion under 5- and 10-N·m valgus moments ( P < .05). At 0°, 10°, and 20° of flexion, these values were close to those for the MCL-intact joint under the respective moments (both P > .05). The combined 280-N simulated STGT load significantly reduced the valgus angle in 0°, 10°, and 20° of flexion under 5- and 10-N·m valgus moments ( P < .05) to values near those for the intact joint (5 N·m: 0°, 10°; 10 N·m: 0°, 10°, 20°; P > .05). In 60° and 90° of flexion, ST and STGT loads did not decrease the resulting valgus angle of the MCL-deficient knee without hamstring loads ( P > .05 vs deficient; P = .0001 vs intact). CONCLUSION: In this human cadaveric study, semitendinosus and gracilis muscles successfully stabilize valgus moments applied to the MCL-insufficient knee when the knee is near extension. CLINICAL RELEVANCE: In the valgus-unstable knee, these data suggest that the hamstring muscles should be preserved in (multi-) ligament surgery when possible.

Conventional over-the-top-aiming devices with short offset fail to hit the center of the human femoral ACL footprint in medial portal technique, whereas medial-portal-aiming devices with larger offset hit the center reliably.

INTRODUCTION: Aim of this study was to investigate the accuracy of a conventional over-the-top-guide (OTG) with a typically short offset to hit the center of the native femoral ACL footprint through the anteromedial portal in comparison to a specific medial-portal-aimer (MPA) with larger offset. MATERIALS AND METHODS: In 20 matched human cadaveric knees, insertion sites of the ACL were marked in medial arthrotomy. An OTG with an offset of 5.5 mm, respectively, the MPA with 9 mm offset was used in a medial portal approach to locate the center of a single bundle ACL reconstruction tunnel with k-wires. Distances from the footprint center, the OTG drilling and the MPA drilling to the roof of the intercondylar notch and to the deep cartilage margin were determined. After positioning of radiological markers, radiographic analysis was performed according to the quadrant technique as described by Bernard and Hertel. RESULTS: The distance from ACL origin to the roof of the notch was 10.3 (±2.1) mm, in the OTG group 6.7 (±1.5) mm and in the MPA group 9.6 (±1.9) mm. The distance to the deep cartilage margin was 9.5 (±1.7) mm from ACL origin, 4.8 (±1.3) mm with OTG and 8.7 (±1.4) mm with MPA. There were statistically significant differences between the distances of the footprint center and the OTG group after measuring and also after radiographic analysis (p < 0.0001). Using the MPA, no significant different distances in comparison to the anatomical ACL center were found (p > 0.0001). There was an increased risk for femoral blow (9/10 vs. 0/10) in the OTG group after overdrilling with a 9 mm drill. CONCLUSION: Short (5.5 mm) offset femoral aiming devices fail to locate the native ACL footprint center in medial portal approach with an increased risk for femoral blowout when overdrilling. The special medial-portal-aiming device with 9 mm offset hit the center reliably.

Biomechanical Properties of Different Fixation Techniques for Posterior Cruciate Ligament Avulsion Fractures.

PURPOSE: To analyze the ultimate failure load, yield load, stiffness, and cyclic elongation of 4 different fixation techniques for posterior cruciate ligament avulsion fractures under cyclic loading and load-to-failure conditions. METHODS: In 40 porcine knees, a standardized bony avulsion of the posterior cruciate ligament was generated. The osseous avulsion was fixed by the following techniques through an open approach: (1) direct anterograde screw fixation (3.5 mm with washer), (2) retrograde screw fixation (3.5 mm with washer), (3) cortical suspension button fixation (with No. 2 braided suture), and (4) direct suture cerclage (with No. 2 braided suture). The constructs were cyclically loaded 500 times (10 to 100 N) to measure the maximum elongation. Subsequently, loading to failure was performed, and stiffness, yield load, and maximum load were measured. A 1-way analysis-of-variance test was performed with significance set at P < .05. RESULTS: Button fixation resulted in lower elongation (1.25 ± 0.27 mm) than anterograde screw fixation (2.17 ± 0.74 mm, P = .0058) and the cerclage technique (2.02 ± 0.24 mm, P = .0290). The cerclage technique showed a lower yield load (493.55 ± 88.86 N) than anterograde screw fixation (720.39 ± 139.0 N, P = .0012) and retrograde screw fixation (668.58 ± 147.59 N, P = .0145); it also had lower stiffness and maximum load values (51.2 ± 6.11 N/mm and 631.22 ± 101.22 N, respectively) than the anterograde screw fixation technique (65.6 ± 12.74 N/mm, P = .041, for stiffness and 817.5 ± 145.9 N, P = .008, for maximum load). None of the other results were significantly different (P > .05). CONCLUSIONS: The cortical suspension button and retrograde screw fixation techniques showed comparable structural properties to the direct screw fixation technique. The raw structural properties of suture cerclage still seem eligible enough to consider using this technique for fixation. CLINICAL RELEVANCE: In this in vitro model, all techniques appear to constitute a biomechanically stable alternative to traditional anterograde screw fixation. In contrast to anterograde screw fixation, these techniques can be performed minimally invasively.

Biomechanical evaluation of knee kinematics after anatomic single- and anatomic double-bundle ACL reconstructions with medial meniscal repair.

PURPOSE: To evaluate knee laxity after anatomic ACL reconstruction with additional suture repair of a medial meniscus tear. METHODS: Kinematics of the intact knee were determined in 12 human cadaver specimens in response to a 134-N anterior tibial load (aTT) and a combined rotatory load of 10 Nm valgus and 4 Nm internal tibial rotation (aTTPS) using a robotic/universal force moment sensor testing system. Subsequently, the ACL was resected following the creation of a standardized tear of the medial meniscus, a standard meniscus repair and an ACL reconstruction using an anatomic single-bundle (6) or an anatomic double-bundle technique (6). Knee kinematics were determined following every sub-step. RESULTS: Significant increase of aTT in the ACL-deficient knee was found (p ≤ 0.001) with a further increase in the ACL-deficient knee with additional medial meniscal rupture (p ≤ 0.001). ACL reconstructions significantly decreased aTT compared with the ACL and meniscus-ruptured knee. No significant differences were seen between the intact knee and the ACL-reconstructed knee with additional meniscal repair (p < 0.05). In response to a simulated pivot shift, aTTPS in the intact knee significantly increased in the ACL-deficient knee and meniscus-ruptured knee (p = 0.005). No significant differences in knee kinematics were found between SB as well as DB ACL reconstruction with additional medial meniscal repair compared with the intact knee. Comparison of SB versus DB ACL reconstruction did not reveal any significant differences in a simulated Lachman test or simulated pivot shift test (n.s.). CONCLUSIONS: aTT as well as aTTPS significantly increased with ACL deficiency compared with the intact knee; additional medial meniscal rupture further increased aTT. Anatomic ACL reconstruction with medial meniscal repair did not reveal significant differences in knee kinematics compared with the intact knee. Comparison of anatomic SB versus DB ACL reconstruction with additional repair of the medial meniscus did not show significant differences neither in a simulated Lachman nor in a simulated pivot shift test.