Dual-potential electrochemiluminescence of single luminophore for detection of biomarker based on black phosphorus quantum dots as co-reactant.

Simultaneous cathodic and anodic electrochemiluminescence (ECL) emissions of needle-like nanostructures of Ru(bpy)32+ (RuNDs) as the only luminophore are reported based on different co-reactants. Cathodic ECL was attained from RuNDs/K2S2O8 system, while anodic ECL was achieved from RuNDs/black phosphorus quantum dots (BPQDs) system. Ferrocene attached to the hairpin DNA could quench the cathodic and anodic ECL simultaneously. Subsequently, the ECL signals recovered in the presence of tumor marker mucin 1 (MUC1), which made it possible to quantitatively detect MUC1. The variation of ECL signal was related linearly to the concentrations of MUC1 in the range 20 pg mL-1 to 10 ng mL-1, and the detection limits were calculated to 2.5 pg mL-1 (anodic system, 3σ) and 6.2 pg mL-1 (cathodic system, 3σ), respectively. The recoveries were 97.0%, 105%, and 95.2% obtained from three human serum samples, and the relative standard deviation (RSD) is 5.3%. As a proof of concept, this work realized simultaneous ECL emission of  a single luminophore, which initiates a new thought in biomarker ECL detection beyond the traditional ones. Simultaneous cathodic and anodic ECL emissions of RuNDs were reported based on different co-reactants. Ferrocene could quench the ECL emission in the cathode and the anode simultaneously. Thus, an aptasensor was constructed based on the variation of ECL intensity. As a proof of concept, this work realized simultaneous ECL emission of a single luminophore, which initiates a new thought in biomarker ECL detection beyond the traditional ones by avoiding the false positive signals.

Electrogenerated Chemiluminescence Resonance Energy Transfer between Ru(bpy)3(2+) Electrogenerated Chemiluminescence and Gold Nanoparticles/Graphene Oxide Nanocomposites with Graphene Oxide as Coreactant and Its Sensing Application.

In the present work, strong anodic electrogenerated chemiluminescence (ECL) of Ru(bpy)3(2+) was observed at a graphene oxide modified glassy carbon electrode (GO/GCE) in the absence of coreactants. The electrocatalytical effect of GO on the oxidation of Ru(bpy)3(2+) suggested that GO itself can act as the coreactant of Ru(bpy)3(2+) ECL, which can be used to fabricate the ECL biosensor. Thiol group terminated adenosine triphosphate (ATP) aptamer was immobilized on the GO film via DNA hybridization. When gold nanoparticles/graphene oxide (AuNPs/GO) nanocomposites were modified on the aptamer through the S-Au bond to form a sandwich-like structure, the ECL resonance energy transfer (ECL-RET) could occur between Ru(bpy)3(2+) and AuNPs/GO nanocomposites, resulting in an apparent decrease of ECL signal. After the ECL sensor was incubated in ATP solution, the AuNPs/GO nanocomposites were released from the electrode due to the specific interaction between aptamer and ATP, leading to the increased ECL signal. On the basis of these results, an ECL aptasensor was fabricated and could be used in the sensitive and selective detection of ATP in the range of 0.02-200 pM with a detection limit of 6.7 fM (S/N = 3). The proposed ECL aptasensor can be applied in the detection of ATP in real samples with satisfactory results.

Electrochemiluminescent Sensing for Caspase-3 Activity Based on Ru(bpy)3(2+)-Doped Silica Nanoprobe.

Caspase-3 is one of the most frequently activated cysteine proteases during the apoptosis process and has been identified as a well-established cellular marker of apoptosis. In this study, a novel approach for the sensitive determination of caspase-3 activity was proposed using electrochemiluminescence (ECL) of Ru(bpy)3(2+)-doped silica (Ru@SiO2) with tripropylamine (TPA) as coreactant. A nanocomposite containing gold nanoparticles (AuNPs), poly(dimethyldiallyl ammonium chloride) (PDDA), and multiwalled carbon nanotubes (CNTs) was fabricated as an ECL platform. The biotinylated DEVD-peptide (biotin-Gly-Asp-Gly-Asp-Glu-Val-Asp-Gly-Cys) was immobilized on the nanocomposite surface via the strong bonding interaction between AuNPs and the thiol group. Then the streptavidin-modified Ru(bpy)3(2+)-doped silica (Ru@SiO2-SA) was immobilized on the ECL platform via the specific interaction between biotin and streptavidin to generate ECL signal. Caspase-3 can specifically recognize and cleave the N-terminus of DEVD, leading to the loss of the biotin label and the decrease of ECL intensity to determine the activity of caspase-3. The results revealed a new ECL avenue for the sensitive and specific monitor of caspase-3, and the platform could be utilized to evaluate anticancer drugs.

Speciation of inorganic- and methyl-mercury in biological matrixes by electrochemical vapor generation from an L-cysteine modified graphite electrode with atomic fluorescence spectrometry detection.

A novel nonchromatographic speciation technique for ultratrace inorganic mercury (Hg(2+)) and methylmercury (CH(3)Hg(+)) in biological materials is developed and validated by electrolytic vapor generation (EVG) coupled with atomic fluorescence spectrometry (AFS). The studies show that CH(3)Hg(+) and Hg(2+) can be converted to Hg vapor efficiently on an l-cysteine modified graphite cathode, which has never been reported before. We observe that only Hg(2+) can be converted efficiently to Hg vapor at low current mode (0.2 A). While at high current mode (2.2 A), both CH(3)Hg(+) and Hg(2+) can be reduced efficiently. As a result, we successfully establish an exact and sensitive method based on the current control to detect mercury speciation for the first time. The factors of electrolytic conditions have been optimized, and the potential mechanism is discussed. Under the optimal conditions, the detection limits (3s) of Hg(2+) and CH(3)Hg(+) in aqueous solutions are 0.098 and 0.073 µg L(-1), respectively. The relative standard deviations for 6 replicate determinations of 2 µg L(-1) Hg are determined as 3.2% and 4.7% for Hg(2+) and CH(3)Hg(+). The accuracy of the method is verified through the analysis of certified reference materials (CRM, NRC-DORM-2), and the proposed method has been applied satisfactorily to the determination of mercury speciation in several seafood samples by calibration curve mode.

Synthesis, characterization, and electrochemiluminescence of luminol-reduced gold nanoparticles and their application in a hydrogen peroxide sensor.

It was found that chloroauric acid (HAuCl(4)) could be directly reduced by the luminescent reagent luminol in aqueous solution to form gold nanoparticles (AuNPs), the size of which depended on the amount of luminol. The morphology and surface state of as-prepared AuNPs were characterized by transmission electron microscopy, UV/visible spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, and thermogravimetric analysis. All results indicated that residual luminol and its oxidation product 3-aminophthalate coexisted on the surface of AuNPs through the weak covalent interaction between gold and nitrogen atoms in their amino groups. Subsequently, a luminol-capped AuNP-modified electrode was fabricated by the immobilization of AuNPs on a gold electrode by virtue of cysteine molecules and then immersion in a luminol solution. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The as-prepared modified electrode exhibited an electrochemiluminescence (ECL) response in alkaline aqueous solution under a double-step potential. H2O2 was found to enhance the ECL. On this basis, an ECL sensor for the detection of H2O2 was developed. The method is simple, fast, and reagent free. It is applicable to the determination of H2O2 in the range of 3x10(-7)-1x10(-3) mol L(-1) with a detection limit of 1x10(-7) mol L(-1) (S/N=3).