Fabrication of a polypropylene immunoassay platform by photografting reaction.

The technology of an immunoassay detection platform is critical to clinical disease diagnoses, especially for developing a medical diagnostic system. A polymer-based immunoassay platform was fabricated on nonwoven fabric polypropylene (PP) using a photografting reaction to graft 2-hydroxyethyl methacrylate (HEMA) and sulfobetaine (SBMA). The antifouling properties of PP-g-P(HEMA-co-SBMA) were investigated by fibrinogen adsorption and platelet adhesion. Carbonyldiimidazole was employed to activate the pendant hydroxyl groups in HEMA moieties and covalently coupled antibody molecules. The detection of the limit of the immunoassay platform was as low as 10 pg/mL. Antibody amount and bioactivity affected the availability of antibody and the sensitivity of immunoassay. The immune efficiency was dependent on the strategies of antibody immobilization. The immune efficiency of Au-g-P(SBMA-co-HEMA) and Au-SH surfaces measured by QCM-D was 165% and 35.7%, respectively. The covalently binding antibody via hydrophilic polymer chains as spacers could retain fragment antigen-binding up orientation, maintain the bioactivity of antibody, and mainly improve the accessibility of antibody molecules via adjusting the conformations of polymer chains when the antibodies recognized the antigens. Therefore, grafting hydrophilic polymers, such as zwitterionic PSBMA and reactive PHEMA onto nonwoven fabric PP, and binding antibody by covalent strategy had the potential to be developed as a commercial immunoassay platform.

Resistance of Zwitterionic Peptide Monolayers to Biofouling.

Self-assembled monolayers (SAMs) are widely used in science and engineering, and recent progress has demonstrated the utility of zwitterionic peptides with alternating lysine (K) and glutamic acid (E) residues for antifouling purposes. Aiming at developing a peptide-based fouling-resistant SAM suitable for presentation of surface-attached pheromones for barnacle larvae, we have investigated five different peptide SAMs, where four are based on the EK motif, and the fifth was designed based on general principles for fouling resistance. The SAMs were formed by self-assembly onto gold substrates via cysteine residues on the peptides, and formation of SAMs was verified via ellipsometry, wettability, infrared reflection-absorption spectroscopy and cyclic voltammetry. Settlement of cypris larvae of the barnacle Balanus (=Amphibalanus) amphitrite, the target of pheromone studies, was tested. SAMs were also subjected to fouling assays using protein solutions, blood serum, and the bacterium Mycobacterium marinum. The results confirm the favorable antifouling properties of EK-containing peptides in most of the assays, although this did not apply to the barnacle larvae settlement test, where settlement was low on only one of the peptide SAMs. The one peptide that had antifouling properties for barnacles did not contain a pheromone motif, and would not be susceptible to degredation by common serine proteases. We conclude that the otherwise broadly effective antifouling properties of EK-containing peptide SAMs is not directly applicable to barnacles, and that great care must be exercised in the design of peptide-based SAMs for presentation of barnacle-specific ligands.

Swelling of Thin Poly(ethylene glycol)-Containing Hydrogel Films in Water Vapor-A Neutron Reflectivity Study.

Hydrogels are widely used in biomedicine and for bioanalytical purposes, normally under wet conditions. For certain applications, processing steps, or process monitoring, hydrogel films are used or treated under ambient conditions, and because they are hygroscopic, it is of interest to investigate how they respond to changes in atmospheric humidity. We have used neutron reflectometry to follow the swelling of thin UV-polymerized hydrogel films in air under different relative humidities (RHs). These polymers were prepared to similar thicknesses on silica and gold substrates, and the chemical similarity between them was verified by infrared spectroscopy. The swelling in response to variations in RH was different for the layers on the two substrate types, reflecting structural changes induced by differences in the UV exposure required to achieve a given polymer thickness, as demonstrated also by differences in the Flory-Huggins interaction parameter, obtained by fitting a Flory-Huggins-type sorption model to the swelling data. Wetting studies show small changes in contact angles with surrounding humidity variations, indicating that structural reorganization at the interface in response to humidity changes is limited.

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: a novel platform for eco-friendly biofouling mitigation.

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA), cationic (polyDMAEMA) and anionic (polySPMA) hydrogels have been successfully grafted onto polypropylene (PP) feed spacers via plasma-mediated UV-polymerization. These coatings maintained their chemical stability after 7 days incubation in neutral (pH 7), acidic (pH 5) and basic (pH 9) environments. Anti-biofouling properties of these coatings were evaluated by Escherichia coli attachment assay and nanofiltration experiments at a TMP of 600 kPag using tap water with additional nutrients as feed and by using optical coherence tomography. Especially the anionic polySPMA-coated PP feed spacer shows reduced attachment of E. coli and biofouling in the spacer-filled narrow channels resulting in delayed biofilm growth. Employing this highly hydrophilic coating during removal of biofouling by two-phase flow cleaning also showed enhanced cleaning efficiency, feed channel pressure drop and flux recoveries. The strong hydrophilic nature and the presence of negative charge on polySPMA are most probably responsible for the improved antifouling behavior. A combination of polySPMA-coated PP feed spacers and two-phase flow cleaning therefore is promising and an environmentally friendly approach to control biofouling in NF/RO systems employing spiral-wound membrane modules.

Lysosomotropic agents: impact on lysosomal membrane permeabilization and cell death.

Lysosomes are acidic organelles essential for degradation, signalling and cell homoeostasis. In addition, they play a key role in cell death. Permeabilization of the lysosomal membrane and release of hydrolytic enzymes to the cytosol accompanies apoptosis signalling in several systems. The regulatory mechanism of lysosomal stability is, however, poorly understood. Lipophilic or amphiphilic compounds with a basic moiety will become protonated and trapped within lysosomes, and such lysosomotropic behaviour is also found in many pharmacological drugs. The natural sphingolipid sphingosine exhibits lysosomotropic detergent ability and is an endogenous candidate for controlling lysosomal membrane permeabilization. The lysosomotropic properties of certain detergents might be of use in lysosome-targeting anticancer drugs and drug delivery system in the future. The present review summarizes the current knowledge on the targeting and permeabilizing properties of lysosomotropic detergents from a cellular and physicochemical perspective.

Secondary structure in de novo designed peptides induced by electrostatic interaction with a lipid bilayer membrane.

We show that it is possible to induce a defined secondary structure in de novo designed peptides upon electrostatic attachment to negatively charged lipid bilayer vesicles without partitioning of the peptides into the membrane, and that the secondary structure can be varied via small changes in the primary amino acid sequence of the peptides. The peptides have a random-coil conformation in solution, and results from far-UV circular dichroism spectroscopy demonstrate that the structure induced by the interaction with silica nanoparticles is solely alpha-helical and also strongly pH-dependent. The present study shows that negatively charged vesicles, to which the peptides are electrostatically adsorbed via cationic amino acid residues, induce either alpha-helices or beta-sheets and that the conformation is dependent on both lipid composition and variations in peptide primary structure. The pH-dependence of the vesicle-induced peptide secondary structure is weak, which correlates well with small differences in the vesicles' electrophoretic mobility, and thus the surface charge, as the pH is varied.

Poly(ethylene glycol)-containing hydrogel surfaces for antifouling applications in marine and freshwater environments.

This work describes the fabrication, characterization, and biological evaluation of a thin protein-resistant poly(ethylene glycol) (PEG)-based hydrogel coating for antifouling applications. The coating was fabricated by free-radical polymerization on silanized glass and silicon and on polystyrene-covered silicon and gold. The physicochemical properties of the coating were characterized by infrared spectroscopy, ellipsometry, and contact angle measurements. In particular, the chemical stability of the coating in artificial seawater was evaluated over a six-month period. These measurements indicated that the degradation process was slow under the test conditions chosen, with the coating thickness and composition changing only marginally over the period. The settlement behavior of a broad and diverse group of marine and freshwater fouling organisms was evaluated. The tested organisms were barnacle larvae (Balanus amphitrite), algal zoospores (Ulva linza), diatoms (Navicula perminuta), and three bacteria species (Cobetia marina, Marinobacter hydrocarbonoclasticus, and Pseudomonas fluorescens). The biological results showed that the hydrogel coating exhibited excellent antifouling properties with respect to settlement and removal.