Recycled Iron Phosphates: A New Phosphorus Fertilizer for Paddy Rice.

The potential of recycled iron phosphates (FePs), e.g., vivianites (Fe3(PO4)2·8H2O) and Fe(III)-rich phosphorus (P) adsorbent materials, as phosphorus fertilizer is limited by the strong interaction between Fe and P. In this study, the efficiency of FePs as P fertilizer was explored by applying them as granules or powder in flooded strongly P-fixing soils (acid and calcareous), thereby taking advantage of increased P release induced by reductive dissolution of P-bearing Fe(III) minerals. First, no P diffusion from granular FeP fertilizers into flooded soils was detectable by the diffusive gradient in thin films (DGT) technique and microfocused X-ray fluorescence (µ-XRF) analysis of thin soil sections, in contrast to detectable P diffusion away from granules of soluble triple superphosphate (TSP) fertilizer. On the contrary, powdered FePs demonstrated an excellent increase in extractable P (1 mM CaCl2) in a 120-day incubation experiment in flooded soils. Second, a pot experiment was performed with rice (Oryza sativa) grown in flooded acid and calcareous soils. The fertilizer value of FePs was remarkable when dosed as powder, as it was even up to 3-fold higher than TSP in the acid soil and similar to TSP in the calcareous soil. The beneficial effect of FeP over TSP in the acid soil is attributed to the slow release of P from FePs, which allows to partly overcome P fixation. The promising results of FePs as P fertilizer applied as powders in flooded soils debunk the generally accepted idea that FePs are poor sources of P while demonstrating the importance of the timing of FeP fertilizer application.

Enhancing the phosphorus content of layered double hydroxide fertilizers by intercalating polymeric phosphate instead of orthophosphate: A feasibility study.

HYPOTHESIS: Layered double hydroxide (LDH) loaded with orthophosphate (PO4) are suggested as slow-release P fertilizers. However, PO4-LDHs have a low maximal P content, related to high charge HPO42-/PO43- anions occupying the anion exchange capacity (AEC) of LDHs. We postulate that the P content of LDHs can be enhanced by exchanging them with polymeric-P (i.e. trimetaphosphate, P3O9), which has a lower molar charge/P ratio than its monomer. EXPERIMENTS: Adsorption capacities were compared between PO4 and P3O9 for as-synthesized and calcined MgAl LDHs with Mg/Al ratio of 2, 3, or 4; the P-LDHs were characterized (XRD, FTIR). Dialysis and soil incubation experiments were performed with PO4-LDHs, P3O9-LDHs, and corresponding soluble fertilizers to compare their P release and P solubility (CaCl2 extract). FINDINGS: The P adsorption capacities were 1.25-1.60 fold larger for P3O9 compared to PO4, yet the high theoretical P contents with P3O9 were not achieved (incomplete loading, P3O9 depolymerization). P3O9-Mg3Al released polymeric-P whereas P3O9-Mg2Al released depolymerized PO4, and P release from P3O9-LDHs was slower than that of PO4-LDHs. With soil incubation, soluble P from P3O9-LDH was initially lower but later converged to that of PO4-LDH as result of continued hydrolysis, yet did not exceed that of the soluble P3O9 and PO4 fertilizers.

Microwave Radiation as a Pre-Treatment for Standard and Innovative Fragmentation Techniques in Concrete Recycling.

Recent advances in concrete recycling technology focus on novel fragmentation techniques to obtain aggregate fractions with low cement matrix content. This study assesses the aggregate liberation effectiveness of four different treatment processes including standard and innovative concrete fragmentation techniques. Lab-made concrete samples were subjected to either standard mechanical crushing technique (SMT) or electrodynamic fragmentation (EDF). For both fragmentation processes, the influence of a microwave weakening pre-treatment technique (MWT) was investigated. A detailed analysis of the particle size distribution was carried out on samples after fragmentation. The >5.6 mm fraction was more deeply characterized for aggregate selective liberation (manual classification to separate liberated aggregates) and for cement matrix content (thermogravimetric measurements). Results highlight that EDF treatment is more effective than SMT treatment to selectively liberate aggregates and to decrease the cement matrix content of the >5.6 mm fraction. EDF fully liberates up to 37 wt.% of the >5.6 mm natural aggregates, while SMT only liberates 14⁻16 wt.%. MWT pre-treatment positively affects aggregate liberation and cement matrix removal only if used in combination with SMT; no significant effect in combination with EDF was recorded. These results of this study can provide insights to successfully implement innovative technology in concrete recycling plants.