Exposure to micro(nano)plastics polymers in water stored in single-use plastic bottles.

Human exposure to micro (nano)plastics (MNPLs) has become a significant concern as a potential health threat. Exposure routes include ingestion, inhalation, and dermal contact, being food and drinking water the primary sources of oral exposure. Here we present the quantification of polymers of MNPLs particles from 700 nm to 20 µm in bottled water commercialised in Spain, including an estimation of the potential risk for daily consumers. We evaluated samples from 20 popular brands in 0.5 and 1.5 L plastic bottles. A double-suspect screening approach developed and validated in our research group for drinking water was adapted for bottled water samples. The identification and quantification of MNPLs-polymers in mass units and the tentative identification of plastic additives (PA) until the second level of confidence was carried out based on high-performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS). The results showed the presence of polypropylene (PP), polyethylene (PE) and polypropylene terephthalate (PET) in the samples. Among them, PE was the most frequently detected and quantified polymer (55% of samples) followed by PET which was detected in 33% of the samples and showing the highest concentration (4700 ng L-1). The median value of the sum of polymer concentrations was 359 ng L-1. In addition, 28 plastic additives were detected, where at least one of them was present in 100% of the samples. Stabilizers and plasticisers were the most frequently identified. A prioritisation study was performed using a multi-QSAR modelling software, where bis(2-ethylhexyl) adipate and bis(2-ethylhexyl) phthalate were estimated as the most potentially harmful compounds for human health. Overall, findings suggest that bottled water is a non-negligible route to exposure to MNPLs.

Micro(nano)plastics in the atmosphere of the Atlantic Ocean.

The occurrence, long-range atmospheric transport and deposition of micro and nano plastics (MNPLs) remains un-quantified for the oceanic atmosphereopen ocean. Here we show the characterisation of MNPLs and the aerosol composition (PM10) in a north-south Atlantic transect from Vigo (Spain) to Punta Arenas (Chile). The analytical procedure to assess the composition of MNPLs consisted of a double suspect screening approach of the polymers and additives, the two constituents of plastics. Polymers were analysed by size exclusion chromatography coupled with high-resolution mass spectrometry using an atmospheric pressure photoionization source operated in positive and negative conditions (HPLC(SEC)-APPI(+/-)-HRMS). Plastic additives were screened with high-performance liquid chromatography coupled to high-resolution mass spectrometry using an electrospray ionisation source (HPLC-ESI(+/-)-HRMS). The most common polymers were polyethylene (PE), polypropylene (PP), polyisoprene (PI), and polystyrene (PS), with the highest polymer concentration being 51.7 ng·m-3 of PI. The air mass back trajectories showed the variable influence of oceanic and terrestrial air masses. These differences were reflected in the aerosol composition with different contributions of Saharan dust, sea spray aerosol, organic/elemental carbon, and MNPLs. Results showed that samples largely influenced by sea-spray and air masses originating from coastal South America and the north Atlantic subtropical gyre were more contaminated by MNPLs. Moreover, this information was complemented by the characterisation of the largest particles using scanning electron microscopy (SEM) and µ-Fourier Transform Infrared Spectroscopy (µ-FTIR). This work provides the first field evidence of the long-range transport of MNPLs in most of the Atlantic Ocean, as the result of dynamic coupling between the lower atmosphere and the surface ocean. Sea-spray formation arises as a key driver for the aerosolisation of MNPLs, and atmospheric transport followed by dry deposition may modulate the occurrence of MNPLs in large oceanic regions, issues that will require future research efforts.

Cytotoxicity assessment and suspected screening of PLASTIC ADDITIVES in bioplastics of single-use household items.

Bioplastics made of renewable sources provide an excellent alternative to fossil-based materials. However, similar or greater quantities of plastic additives than fossil-based plastics are used in the formulations of bioplastics to improve their performance and barrier properties. Nowadays, there is an increasing concern about sources of chemical exposure. However, there is an important knowledge gap regarding complex additive mixtures, particularly in bio-based materials. In this study, we have characterised the presence of plastic additives in single-use materials (collected from retail shops in Spain), which are made of the most common bio-based biodegradable materials, poly(lactic acid) (PLA) and poly(hydroxybutyrate) (PHB), in contrast with a fossil-based plastic material that is extensively made from high-density polyethylene (HDPE). The approach consisted of the pulverization of material in the nano-micro range (100 nm-10 µm), with the materials being extracted using different solvents and ultrasonic-assisted solvent extraction (UASE). 100% of the additives in the material cannot be extracted, but since they were performed in the same condition for all materials can inform about the fingerprint of primary organics and the relative abundances between the different materials. The extracts were analysed by high-performance liquid chromatography coupled with high-resolution mass spectrometry equipped with a heated electrospray ionisation source operated in positive and negative ionisation conditions (HPLC-HESI(+/-)-HRMS), separately, using a suspect screening approach. A total number of 203 additives were tentatively identified (confidence level 2) in the bioplastics items of this study. An average of 123 plastic additives were found in PLA items and 121 in PHB items. Plasticisers were the most abundant additives; the phthalates group was the most commonly found, while 63 plastic additives were confirmed by standards and quantified. In parallel, the cytotoxicity of plastic particles in terms of cell viability and oxidative stress was studied using A549 alveolar basal epithelial cells, and the toxicity of the different extracts was also established using HepG2 adenocarcinoma cells. The main results of this study demonstrate that the plastic particles did not show a significant reduction in cell viability, but oxidative stress was significant, with PLA being the material that showed the highest effect. On the other hand, extracts of plastic particles did not show inhibition of cell viability except for HDPE extract, but the different extracts produced oxidative stress, with PLA showing the highest effect. Although the item showing the highest concentrations of additives was the extract of PLA material while also showing the most elevated oxidative stress, the low migration of toxicants from plastic materials ensures their safe use. However, this also supports the idea that bioplastics can contain many toxic substances in their formulations, some of which are unknown and should be studied in more depth.

Polymers of micro(nano) plastic in household tap water of the Barcelona Metropolitan Area.

Microplastics (MPLs) are emerging persistent pollutants affecting drinking water systems, and different studies have reported their presence in tap water. However, most of the work has a focus on particles in the 100-5 µm range. Here, a workflow to identify and quantify polymers of micro and nanoplastics (MNPLs), with sizes from 0.7 to 20 µm in tap water, is presented. The analytical method consisted of water fractionated filtration followed by toluene ultrasonic-assisted extraction and size-exclusion chromatography, using an advanced polymer chromatography column coupled to high-resolution mass spectrometry with atmospheric pressure photoionization source with negative and positive ionization conditions (HPLC(APC)-APPI(±)-HRMS) and normal phase chromatography HILIC LUNA® column and electrospray ionisation source in positive and negative mode (HPLC(HILIC)-ESI(±)-HRMS). The acquisition was performed in full scan mode, and the subsequent tentative identification of MNPLs polymers has been based on increasing the confirmation level, including the characterisation of monomers by using Kendrick Mass Defect (KMD) analysis, and confirmation and quantification using standards. This approach was applied to assess MNPLs in tap water samples of the Barcelona Metropolitan Area (BMA), that were collected from August to October 2020 from home taps of volunteers distributed in the 42 postal codes of the BMA. Polyethylene (PE), polypropylene (PP), polyisoprene (PI), polybutadiene (PBD), polystyrene (PS), polyamide (PA), and polydimethylsiloxanes (PDMS) were identified. PE, PP, and PA were the most highly detected polymers, and PI and PBD were found at the highest concentrations (9,143 and 1,897 ng/L, respectively). A principal component analysis (PCA) was conducted to assess differences in MNPLs occurrence in drinking water, that was provided from the two drinking water treatment plants (DWTPs) suppliers. Results showed that no significant differences (at 95% confidence level) were established between the drinking water supplies to the different areas of the BMA.

Assessment of Micro- and Nanoplastic Composition (Polymers and Additives) in the Gastrointestinal Tracts of Ebro River Fishes.

One of the main routes of fish exposure to micro- and nanoplastics (MNPLs) is their ingestion. MNPLs can act as reservoirs of organic contaminants that are adsorbed onto their surfaces, or that can leach from their complex formulations, with potential impacts on biota and along the aquatic food chain. While MNPLs have been reported in fishes worldwide, complete information on MNPL compositions, polymers and additives continues to be scarce. In this work, the presence of MNPLs in the gastrointestinal tracts (GIT) of fish from the Ebro River (Spain) was investigated using a double suspected screening approach to assess and quantify polymers and additives. The sample-preparation procedure consisted of sequential alkaline and acidic digestions with KOH and HNO3, followed by ultrasonic-assisted extraction (USAE) with toluene. The analysis of polymers was carried out with size-exclusion chromatography followed by high-resolution mass spectrometry using an atmospheric pressure photoionization source, operating in negative and positive ionisation modes (SEC-(±)-APPI-HRMS) using full-scan acquisition (FS). Plastic additives were assessed using high-performance liquid chromatography with a C18 analytical column coupled to HRMS equipped with an electrospray ionisation source operating under positive and negative conditions (LC-(±ESI)-HRMS). The acquisition was performed in parallel with full-scan (FS) and data-dependent scan (ddMS2) modes, working under positive and negative ionisation modes. The polymers most frequently detected and quantified in fish GITs were polysiloxanes, polyethylene (PE), polypropylene (PP) and polystyrene (PS). PE was detected in 84% of the samples, with a concentration range from 0.55 to 3545 µg/g. On the other hand, plasticisers such as phthalates and stabilisers such as benzotriazoles were the most frequently identified plastic additives.

Screening of suspected micro(nano)plastics in the Ebro Delta (Mediterranean Sea).

This is the first work reporting the use of a double suspect-screening to assess most common polymers and additives in micro(nano)plastics (NPLs/MPLs) found in environmental waters. The method consisted of water filtration followed by ultrasonic-assisted extraction with toluene and analysis employing size exclusion chromatography using an advanced polymer chromatography column coupled to high-resolution mass spectrometry with an atmospheric pressure photoionisation source by negative ionisation conditions (LC(APC)-APPI(-)-HRMS). The identification of NPL/MPLs polymers has been based on increasing confirmation level, including the monomers characterisation by the Kendrick Mass Defect and confirmation and quantification when standards were available. In parallel, the identification of main additives in NPL/MPLs composition, as well organic contaminants adsorbed onto the plastic particles were carried out by analysis of the extracts by LC(C18)-APPI (+/-)-HRMS. To assess the impact of plastic pollution it is necessary to assess the composition in terms of polymers but also the additives. This screening approach has been employed to study composition of NPL/MPLs in the Ebro Delta. Two sampling campaigns including freshwater and seawater samples have been investigated to assess plastic composition in the top 5 cm. Polystyrene (PS), polyethylene (PE), polyisoprene (PI), polybutadiene (PBD), polypropylene (PP) and polysiloxanes were the most detected polymers and PP and PE, sizing between < 1000 and 2000 Da, were found at concentrations reaching up to 7000 ng/L in some areas. The pentadecanoic acid, 1,2,3-benzotriazoles, 2-ethylhexanoic acid (2-EHA), and phthalates such as dimethyl phthalate, mono(2-ethylhexyl) phthalate (MEHP) and the phthalimide were more frequently detected plastic additives. Finally, series of organic contaminants were as well detected in the particulate fraction. These organic contaminants cannot be associated to plastic compositions but can be associated to their adsorption to the particulate matter, in particular to NPL/MPLs, due to their non-polar character. Among these organic contaminants, the more frequently detected were pharmaceutical compounds, food additives and pesticides.

A new digestion approach for the extraction of microplastics from gastrointestinal tracts (GITs) of the common dolphinfish (Coryphaena hippurus) from the western Mediterranean Sea.

Plastic ingestion is one of the main impacts of marine litter on organisms. The occurrence of microplastics (MPs < 5 mm) in the stomachs of Mediterranean species was already reported in several studies. In this context, the present study aims to develop a new approach of digestion for the identification of MPs in the gastrointestinal tracts (GITs) of marine organisms. The new approach combines two digestion protocols, including potassium hydroxide (KOH) and nitric acid (HNO3), to remove most organic and inorganic materials. This digestion allows recording small MPs that are difficult to find via routinely stomach content analysis and also to minimize the overestimation of the phenomenon trough the control of airborne contamination. The new approach was tested on a voracious pelagic opportunistic predator, the common dolphinfish, a fishery resource exploited in several Mediterranean areas. The results showed that a large amount of ingested meso- and microplastics, such as fragments or sheets, was recorded in GITs (F = 65.5 %). The FTIR analysis on litter samples allowed to identify polyethylene, polypropylene and polystyrene as dominant constituent polymers of microplastics. These results confirmed that our novel combined digestion protocol represents a reliable approach to detect MPs in opportunistic pelagic predators.

Medium to highly polar pesticides in seawater: Analysis and fate in coastal areas of Catalonia (NE Spain).

Pollution has been less investigated in marine and coastal environments than in inland waters. The low levels at which pollutants are expected to be present in seawater calls for the use of reliable and high sensitivity analytical methodologies. In this context, this work presents the optimization and validation of an analytical method to determine 26 medium to highly polar pesticides in seawater based on solid phase extraction and liquid chromatography-tandem mass spectrometry detection. The developed methodology was linear, accurate (relative recoveries within 80-120% for most analytes), repeatable (relative standard deviations <18% for most analytes), and sensitive (limits of determination <1 ng/L for 89% of the compounds). The use of isotopically labeled compounds as surrogate standards compensated for low analyte recoveries and matrix effects. The method was applied to the analysis of seawater samples collected along the coastline of Catalonia (NE Spain). Overall, total pesticide loads were higher inside the marinas than outside. The booster biocides diuron and irgarol used in antifouling paintings and different triazine pesticides were the most abundant compounds. Irgarol was present above the maximum allowable concentration set in European regulations in 70% of the samples collected inside the marinas. A different pesticide pollution pattern, with MCPA and bentazone presenting the highest concentrations, was observed at the Ebro Delta area due to the impact of the agricultural activities carried out there. To the authors' knowledge, 4 out of the 26 target pesticides, namely, chlorfenvinphos, fenthion oxon, fenthion sulfone, and fenthion sulfoxide, have not been previously investigated in seawater.

Occurrence and distribution of six selected endocrine disrupting compounds in surface- and groundwaters of the Romagna area (North Italy).

Endocrine disrupting compounds (EDCs) are a wide group of contaminants of emerging concern known to be harmful for organisms. The aim of the study was to assess the occurrence and distribution of six EDCs (estrone-E1, ß-estradiol-E2, 17α-ethinylestradiol-EE2, bisphenol A-BPA, perfluooctanoic acid-PFOA, perfluorooctane sulfonate-PFOS) in the Apenninic rivers and groundwaters of the Romagna area (North of Italy). Groundwaters were unaffected by EDC contamination, while all classes of compounds were detected at concentrations above the method quantification limit (MQL) in the majority of the river bodies. In detail, PFOA and PFOS concentrations varied between

Comparative study of an estradiol enzyme-linked immunosorbent assay kit, liquid chromatography-tandem mass spectrometry, and ultra performance liquid chromatography-quadrupole time of flight mass spectrometry for part-per-trillion analysis of estrogens in water samples.

Estrogens have been often identified as the major contributors to the endocrine-disrupting activity observed in environmental waters. However, their analysis in these, sometimes very complex, matrices is still challenging due to the very low detection limits and the selectivity required for their reliable determination at the very low concentrations at which they are physiologically active. In this work, a polyclonal enzyme-linked immunosorbent assay (ELISA) kit for 17-beta-estradiol analysis, high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) based on triple-quadrupole analyzer (QqQ), and a newly developed method based on ultra performance liquid chromatography-quadrupole time of flight mass spectrometry (UPLC-Q-TOF-MS) have been evaluated in terms of performance for the rapid screening, quantitative analysis, and unequivocal identification of some selected, environmentally relevant estrogens in different water matrices, including urban wastewater, river water, and ground water, after solid phase extraction. Compounds quantified and/or identified included the estrogens 17-beta-estradiol, estrone, 17-alpha-ethynyl estradiol and estriol, and the isoflavones daidzein, genistein, and biochanin A. Except for a moderate overestimation using the ELISA kit, especially in the analysis of complex wastewater samples, results obtained by all the investigated techniques were in very good, general agreement. The instrumental sensitivity achieved increased in the order: UPLC-Q-TOF-MS < polyclonal ELISA kit < HPLC-MS/MS (QqQ). Direct analysis of water samples by using the ELISA kit permitted to reach a limit of detection of 2.5 ng L(-1). However, using an appropriated sample pretreatment method detection limits at nanogram to picogram per liter levels can be obtained with all techniques and the risk for matrix effects is minimized. In terms of selectivity, both HPLC-MS/MS (QqQ) and UPLC-Q-TOF-MS show outstanding performance, but the latter allows, in addition, shorter analysis times (16 min vs. 45 min) and the identification of non-target, unknown compounds. The identification of unknown compounds is based on the accurate mass measurements for the precursor and product ions, that permit the elemental compositions calculation and the chemical structures to be identified searching against different databases.

Evaluation of commercial immunoassays for the detection of estrogens in water by comparison with high-performance liquid chromatography tandem mass spectrometry HPLC-MS/MS (QqQ).

In this work four different commercially available enzyme-linked immunosorbent assays (ELISA) (from Japan EnviroChemicals, Ltd., Tokyo, Japan) were evaluated in terms of performance for the rapid screening of estrogens in different water matrices, including natural and spiked samples from urban wastewater, river water and ground water. All four test kits are based on monoclonal antibodies. The compounds detected by these immunoassays are (1) 17-beta-estradiol, (2) estrone, (3) 17-alpha-ethynyl estradiol and (4) estrogens in general, with high recognition properties for 17-beta-estradiol, estrone and estriol. Standards were prepared in water containing 10% (v/v) methanol. The IC50 (corresponding to the 50% of the effective concentration) values, the dynamic ranges, and the limits of detection of the ELISA kits were 0.060-0.304 microg/L, 0.05-5 microg/L and 0.05 microg/L, respectively. All samples were extracted by solid-phase extraction (SPE) beforehand, and the evaluation was carried out by comparing the results obtained by ELISA with those obtained by HPLC-MS/MS using a triple quadrupole (QqQ) instrument. In addition, two different solid-phase extraction procedures were carried out and compared. Except for moderate overestimation in the results observed with the ELISA kits in the analysis of complex wastewater samples, the results obtained using all of the tested techniques were generally in very good agreement.