The role of pore size and mechanical properties on the accumulation, retention and distribution of F98 glioblastoma cells in macroporous hydrogels.

Glioblastoma (GBM) accounts for half of all central nervous system tumors. Once the tumor is removed, many GBM cells remain present near the surgical cavity and infiltrate the brain up to a distance of 20-30 mm, resulting in recurrence a few months later. GBM remains incurable due to the limited efficiency of current treatments, a result of the blood-brain barrier and sensitivity of healthy brain tissues to chemotherapy and radiation. A new therapeutic paradigm under development to treat GBM is to attract and accumulate GBM cells in a cancer cell trap inserted in the surgical cavity after tumor resection. In this work, porous gels were prepared using porous polylactide molds obtained from melt-processed co-continuous polymer blends of polystyrene and polylactide, with an average pore size ranging from 5 µm to over 500 µm. In order to efficiently accumulate and retain GBM brain cancer cells within a macroporous sodium alginate-based hydrogel trap, the pores must have an average diameter superior to 100 µm, with the best results obtained at 225 µm. In that case, the accumulation and retention of F98 GBM cells were more homogeneous, especially when functionalized with RGD adhesion peptides. At an alginate concentration of 1% w/v, the compression modulus reaches 15 kPa, close to the average value of 1-2 kPa reported for brain tissues, while adhesion and retention were also superior compared to 2% w/v gels. Overall, 1% w/v gels with 225 µm pores functionalized with the RGD peptide display the best performances.

Assessment of antibacterial properties and skin irritation potential of anodized aluminum impregnated with various quaternary ammonium.

The importance of the inert environment in the transmission of pathogens has been reassessed in recent years. To reduce cross-contamination, new biocidal materials used in high touch surfaces (e.g., stair railings, door handles) have been developed. However, their impact on skin remains poorly described. The present study aimed to evaluate the antibacterial properties and the risk of skin irritation of two materials based on hard-anodized aluminum (AA) impregnated with quaternary ammonium compound solutions (QAC#1 or QAC#2). The QAC#1 or QAC#2 solutions vary in composition, QAC#2 being free of dioctyl dimethyl ammonium chloride (Dio-DAC) and octyl decyl dimethyl ammonium chloride (ODDAC). Unlike AA used as a control, both AA-QAC#1 and AA-QAC#2 had excellent and rapid antibacterial efficacy, killing 99.9 % of Staphylococcus aureus and Escherichia coli bacteria, in 15 s and 1 min, respectively. The impregnation solutions (QAC#1 and QAC#2) did not show any skin sensitizing effect on transformed human keratinocytes. Nevertheless, these solutions as well as the materials (AA-QAC#1, AA-QAC#2), and the liquid extracts derived from them, induced a very rapid cytotoxicity on L929 murine fibroblasts (>70 % after 1 h of contact) as shown by LDH, MTS and neutral red assays. This cytotoxicity can be explained by the fast QACs release occurring when AA-QAC#1 and AA-QAC#2 were immersed in aqueous medium. To overcome the limitation of assays based on liquid condition, an in vitro skin irritation assay on reconstructed human epidermis (RHE) was developed. The effect of the materials upon their direct contact with the epidermis grown at the liquid-air interface was determined by evaluating tissue viability and quantifying interleukin-1 alpha (IL-1α) which is released in skin during injury or infection. AA-QAC#1 induced a significant decrease in RHE viability, close to OECD and ISO 10993-10 acceptability thresholds and enhanced the pro-inflammatory IL-1α secretion compared with AA-QAC#2. Finally, these results were corroborated by in vivo assays on mice using erythema and edema visual scores, histological observations, and epidermal thickness measurement. AA had no effect on the skin, while a stronger irritation was induced by AA-QAC#1 compared with AA-QAC#2. Hence, these materials were classified as moderate and slight irritants, respectively. In summary, this study revealed that AA-QAC#2 without Dio-DAC and ODDAC could be a great candidate for high touch surface applications, showing an extremely effective and rapid bactericidal activity, without inducing adverse effects for skin tissue.

Effect of Chitosan on Alginate-Based Macroporous Hydrogels for the Capture of Glioblastoma Cancer Cells.

Glioblastoma multiforme is a type of brain cancer associated with a very low survival rate since a large number of cancer cells remain infiltrated in the brain despite the treatments currently available. This work presents a macroporous hydrogel trap, destined to be implanted in the surgical cavity following tumor resection and designed to attract and retain cancer cells, in order to eliminate them afterward with a lethal dose of stereotactic radiotherapy. The biocompatible hydrogel formulation comprises sodium alginate (SA) and chitosan (CHI) bearing complementary electrostatic charges and stabilizing the gels in saline and cell culture media, as compared to pristine SA gels. The highly controlled and interconnected porosity, characterized by X-ray microCT, yields mechanical properties comparable to those of brain tissues and allows F98 glioblastoma cells to penetrate the gels within the entire volume, as confirmed by fluorescence microscopy. The addition of a grafted -RGD peptide on SA, combined with CHI, significantly enhances the adhesion and retention of F98 cells within the gels. Overall, the best compromise between low proliferation and a high level of accumulation and retention of F98 cells was obtained with the hydrogel formulated with 1% SA and 0.2% CHI, without the -RGD adhesion peptide.

Drug Delivery Systems in the Development of Novel Strategies for Glioblastoma Treatment.

Glioblastoma multiforme (GBM) is a grade IV glioma considered the most fatal cancer of the central nervous system (CNS), with less than a 5% survival rate after five years. The tumor heterogeneity, the high infiltrative behavior of its cells, and the blood-brain barrier (BBB) that limits the access of therapeutic drugs to the brain are the main reasons hampering the current standard treatment efficiency. Following the tumor resection, the infiltrative remaining GBM cells, which are resistant to chemotherapy and radiotherapy, can further invade the surrounding brain parenchyma. Consequently, the development of new strategies to treat parenchyma-infiltrating GBM cells, such as vaccines, nanotherapies, and tumor cells traps including drug delivery systems, is required. For example, the chemoattractant CXCL12, by binding to its CXCR4 receptor, activates signaling pathways that play a critical role in tumor progression and invasion, making it an interesting therapeutic target to properly control the direction of GBM cell migration for treatment proposes. Moreover, the interstitial fluid flow (IFF) is also implicated in increasing the GBM cell migration through the activation of the CXCL12-CXCR4 signaling pathway. However, due to its complex and variable nature, the influence of the IFF on the efficiency of drug delivery systems is not well understood yet. Therefore, this review discusses novel drug delivery strategies to overcome the GBM treatment limitations, focusing on chemokines such as CXCL12 as an innovative approach to reverse the migration of infiltrated GBM. Furthermore, recent developments regarding in vitro 3D culture systems aiming to mimic the dynamic peritumoral environment for the optimization of new drug delivery technologies are highlighted.

An alginate-based macroporous hydrogel matrix to trap cancer cells.

To overcome the radioresistance of glioblastoma (GBM) cells infiltrated in the brain, we propose to attract these cancer cells into a trap to which a lethal radiation dose can be delivered safely. Herein, we have prepared and characterized a sodium alginate-based macroporous hydrogel as a potential cancer cell trap. Microcomputed X-ray tomography shows that the hydrogel matrices comprise interconnected pores with an average diameter of 300 µm. The F98 GBM cells migrated in the pores and mainly accumulated in the center of the matrix. Depending on the number of cancer cells added, the grafting of RGD cell-adhesion peptides to the alginate resulted in a 4 to 10 times increase in the number of F98 cells (which overexpress the associated αvß3 and αvß5 binding integrins) retained in the matrix. Finally, a radiation dose of 25 Gy eliminated all F98 cells trapped in the matrix, without significantly altering the matrix mechanical properties.

Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria.

Infections caused by multidrug-resistant bacteria are a major public health problem. Their transmission is strongly linked to cross contamination via inert surfaces, which can serve as reservoirs for pathogenic microorganisms. To address this problem, antibacterial materials applied to high-touch surfaces have been developed. However, reaching a rapid and lasting effectiveness under real life conditions of use remains challenging. In the present paper, hard-anodized aluminum (AA) materials impregnated with antibacterial agents (quaternary ammonium compounds (QACs) and/or nitrate silver (AgNO3)) were prepared and characterized. The thickness of the anodized layer was about 50 µm with pore diameter of 70 nm. AA with QACs and/or AgNO3 had a water contact angle varying between 45 and 70°. The antibacterial activity of the materials was determined under different experimental settings to better mimic their use, and included liquid, humid, and dry conditions. AA-QAC surfaces demonstrated excellent efficiency, killing >99.9% of bacteria in 5 min on a wide range of Gram-positive (Staphylococcus aureus, Clostridioides difficile, vancomycin-resistant Enterococcus faecium) and Gram-negative (streptomycin-resistant Salmonella typhimurium and encapsulated Klebsiella pneumoniae) pathogens. AA-QACs showed a faster antibacterial activity (from 0.25 to 5 min) compared with antibacterial copper used as a reference (from 15 min to more than 1 h). We show that to maintain their high performance, AA-QACs should be used in low humidity environments and should be cleaned with solutions composed of QACs. Altogether, AA-QAC materials constitute promising candidates to prevent the transmission of pathogenic bacteria on high-touch surfaces.

Erratum: Gascon S.; et al. Characterization and Mathematical Modeling of Alginate/Chitosan-Based Nanoparticles Releasing the Chemokine CXCL12 to Attract Glioblastoma Cells. Pharmaceutics 2020, 12, 356.

The authors wish to make the following correction to this paper [...].

Characterization and Mathematical Modeling of Alginate/Chitosan-Based Nanoparticles Releasing the Chemokine CXCL12 to Attract Glioblastoma Cells.

Chitosan (Chit) currently used to prepare nanoparticles (NPs) for brain application can be complexed with negatively charged polymers such as alginate (Alg) to better entrap positively charged molecules such as CXCL12. A sustained CXCL12 gradient created by a delivery system can be used, as a therapeutic approach, to control the migration of cancerous cells infiltrated in peri-tumoral tissues similar to those of glioblastoma multiforme (GBM). For this purpose, we prepared Alg/Chit NPs entrapping CXCL12 and characterized them. We demonstrated that Alg/Chit NPs, with an average size of ~250 nm, entrapped CXCL12 with ~98% efficiency for initial mass loadings varying from 0.372 to 1.490 µg/mg NPs. The release kinetic profiles of CXCL12 were dependent on the initial mass loading, and the released chemokine from NPs after seven days reached 12.6%, 32.3%, and 59.9% of cumulative release for initial contents of 0.372, 0.744, and 1.490 µg CXCL12/mg NPs, respectively. Mathematical modeling of released kinetics showed a predominant diffusive process with strong interactions between Alg and CXCL12. The CXCL12-NPs were not toxic and did not promote F98 GBM cell proliferation, while the released CXCL12 kept its chemotaxis effect. Thus, we developed an efficient and tunable CXCL12 delivery system as a promising therapeutic strategy that aims to be injected into a hydrogel used to fill the cavity after surgical tumor resection. This system will be used to attract infiltrated GBM cells prior to their elimination by conventional treatment without affecting a large zone of healthy brain tissue.

Silver-Polymethylhydrosiloxane Nanocomposite Coating on Anodized Aluminum with Superhydrophobic and Antibacterial Properties.

Biofilm formation on both animate and inanimate surfaces serves as an ideal bacterial reservoir for the spread of nosocomial infections. Designing surfaces with both superhydrophobic and antibacterial properties can help reduce initial bacterial attachment and subsequent biofilm formation. In the present study, a two-step approach is deployed to fabricate silver-polymethylhydrosiloxane (Ag-PMHS) nanocomposites, followed by a simple dip-coating deposition on anodized Al. Ag-nanoparticles (Ag-NPs) are synthesized in situ within a PMHS polymeric matrix. Morphological features of Ag-PMHS coating observed by scanning electron microscopy shows heterogeneous micro-nano-structures. The chemical compositions of these coatings were characterized using X-ray diffraction and attenuated total reflection-Fourier transform infrared spectroscopy, which indicate the presence of a low-energy PMHS polymer. The as-synthesized Ag-PMHS nanocomposite demonstrated excellent antibacterial properties against clinically relevant planktonic bacteria with zone of inhibition values of 25.3 ± 0.5, 24.8 ± 0.5, and 23.3 ± 3.6 mm for Pseudomonas aeruginosa (P.A) (Gram -ve), Escherichia coli (E. coli) (Gram -ve), and Staphylococcus aureus (S.A) (Gram +ve), respectively. The Ag-PMHS nanocomposite coating on anodized Al provides an anti-biofouling property with an adhesion reduction of 99.0, 99.5, and 99.3% for Pseudomomas aeruginosa (P.A), E. coli, and S. aureus (S.A), respectively. Interestingly, the coating maintained a stable contact angle of 158° after 90 days of immersion in saline water (3.5 wt % NaCl, pH 7.4). The Ag-PMHS nanocomposite coating on anodized Al described herein demonstrates excellent antibacterial and anti-biofouling properties owing to its inherent superhydrophobic property.

Muscle injury-induced hypoxia alters the proliferation and differentiation potentials of muscle resident stromal cells.

BACKGROUND: Trauma-induced heterotopic ossification (HO) is a complication that develops under three conditions: the presence of an osteogenic progenitor cell, an inducing factor, and a permissive environment. We previously showed that a mouse multipotent Sca1+ CD31- Lin- muscle resident stromal cell (mrSC) population is involved in the development of HO in the presence of inducing factors, members of the bone morphogenetic protein family. Interestingly, BMP9 unlike BMP2 causes HO only if the muscle is damaged by injection of cardiotoxin. Because acute trauma often results in blood vessel breakdown, we hypothesized that a hypoxic state in damaged muscles may foster mrSCs activation and proliferation and trigger differentiation toward an osteogenic lineage, thus promoting the development of HO. METHODS: Three- to - six-month-old male C57Bl/6 mice were used to induce muscle damage by injection of cardiotoxin intramuscularly into the tibialis anterior and gastrocnemius muscles. mrSCs were isolated from damaged (hypoxic state) and contralateral healthy muscles and counted, and their osteoblastic differentiation with or without BMP2 and BMP9 was determined by alkaline phosphatase activity measurement. The proliferation and differentiation of mrSCs isolated from healthy muscles was also studied in normoxic incubator and hypoxic conditions. The effect of hypoxia on BMP synthesis and Smad pathway activation was determined by qPCR and/or Western blot analyses. Differences between normally distributed groups were compared using a Student's paired t test or an unpaired t test. RESULTS: The hypoxic state of a severely damaged muscle increased the proliferation and osteogenic differentiation of mrSCs. mrSCs isolated from damaged muscles also displayed greater sensitivity to osteogenic signals, especially BMP9, than did mrSCs from a healthy muscle. In hypoxic conditions, mrSCs isolated from a control muscle were more proliferative and were more prone to osteogenic differentiation. Interestingly, Smad1/5/8 activation was detected in hypoxic conditions and was still present after 5 days, while Smad1/5/8 phosphorylation could not be detected after 3 h of normoxic incubator condition. BMP9 mRNA transcripts and protein levels were higher in mrSCs cultured in hypoxic conditions. Our results suggest that low-oxygen levels in damaged muscle influence mrSC behavior by facilitating their differentiation into osteoblasts. This effect may be mediated partly through the activation of the Smad pathway and the expression of osteoinductive growth factors such as BMP9 by mrSCs. CONCLUSION: Hypoxia should be considered a key factor in the microenvironment of damaged muscle that triggers HO.

Effect of BMP-9 on endothelial cells and its role in atherosclerosis.

Atherosclerosis is an inflammatory disease involving dysfunction of endothelial cells (EC) and enhanced permeability of the endothelium to oxidized low-density lipoprotein and the transmigration of monocytes from the blood to the intima where they are transformed into foam cells after lipid engulfment. Changes in the composition of the basement membrane leading to increased fibronectin deposition also occur and modify EC-extracellular matrix (ECM) mechanotransduction. The release of lipids due to foam cell apoptosis, as well as the migration of vascular smooth muscle cells from the media to the intima and their proliferation, increase the stiffness of arteries at later stages of atherosclerosis. EC dysfunction also involves other factors, including soluble cytokines and growth factors (GF) such as bone morphogenetic proteins (BMP). BMP-9 is a potent circulatory GF which has been shown to affect EC behavior. However, to date, few studies have investigated its role in atherosclerosis. The present review describes the histology and homeostasis of arteries by explaining EC function/dysfunction and discusses BMP-9 effect on EC behavior, considering factors engaged in the development of atherosclerosis.

A small peptide derived from BMP-9 can increase the effect of bFGF and NGF on SH-SY5Y cells differentiation.

The current aging of the world population will increase the number of people suffering from brain degenerative diseases such as Alzheimer's disease (AD). There are evidence showing that the use of growth factors such as BMP-9 could restored cognitive function as it acts on many AD hallmarks at the same time. However, BMP-9 is a big protein expensive to produce that can hardly access the central nervous system. We have therefore developed a small peptide, SpBMP-9, derived from the knuckle epitope of BMP-9 and showed its therapeutic potential in a previous study. Since it is known that the native protein, BMP-9, can act in synergy with other growth factors in the context of AD, here we study the potential synergistic effect of various combinations of SpBMP-9 with bFGF, EGF, IGF-2 or NGF on the cholinergic differentiation of human neuroblastoma cells SH-SY5Y. We found that, in opposition to IGF-2 or EGF, the combination of SpBMP-9 with bFGF or NGF can stimulate to a greater extent the neurite outgrowth and neuronal differentiation toward the cholinergic phenotype as shown by expression and localization of the neuronal markers NSE and VAchT and the staining of intracellular calcium. Those results strongly suggest that SpBMP-9 plus NGF or bFGF are promising therapeutic combinations against AD that required further attention.

Characterization of alginate/chitosan-based nanoparticles and mathematical modeling of their SpBMP-9 release inducing neuronal differentiation of human SH-SY5Y cells.

The incidence of brain degenerative disease such as Alzheimer's disease (AD) will increase as the world population is ageing. While current AD treatments have only a transient effect, there are many evidences indicating that some growth factors, such as BMP-9, may be used to treat AD. However, growth factors cannot readily access the brain because of their size and the presence of the blood brain barrier. We have therefore developed a small peptide derived from BMP-9, SpBMP-9, which can promote the differentiation of cholinergic neurons and inactivate GSK3beta, a Tau kinase. Here, we investigated the potential of a nanoparticle-based delivery system of SpBMP-9, made of alginate and chitosan (Alg/Chit NPs), as a new therapeutic strategy against AD. The Alg/Chit NPs size distribution revealed NPs with an average diameter of ∼240nm. The encapsulation efficiency of SpBMP-9 was ∼70% of the initial peptide mass loading. Release kinetics of SpBMP-9 were performed in physiological conditions and modelled with a mechanistic framework that took into account the size distribution of Alg/Chit NPs. The release of SpBMP-9 revealed to be mostly diffusive, but there were interactions between the peptide and the alginate chains. The Alg/Chit NPs could also increase the viability of SH-SY5Y cells in comparison to the control. Finally, the SpBMP-9 released from Alg/Chit NPs promoted the SH-SY5Y differentiation into mature neurons as demonstrated by a higher neurite outgrowth and an increased expression of the neuronal markers NSE and VAchT. In conclusion, the nano-scale SpBMP-9 delivery system made of Alg/Chit may be a promising therapeutic strategy against AD.

Peptides derived from the knuckle epitope of BMP-9 induce the cholinergic differentiation and inactivate GSk3beta in human SH-SY5Y neuroblastoma cells.

The incidence of brain degenerative disorders like Alzheimer's disease (AD) will increase as the world population ages. While there is presently no known cure for AD and current treatments having only a transient effect, an increasing number of publications indicate that growth factors (GF) may be used to treat AD. GFs like the bone morphogenetic proteins (BMPs), especially BMP-9, affect many aspects of AD. However, BMP-9 is a big protein that cannot readily cross the blood-brain barrier. We have therefore studied the effects of two small peptides derived from BMP-9 (pBMP-9 and SpBMP-9). We investigated their capacity to differentiate SH-SY5Y human neuroblastoma cells into neurons with or without retinoic acid (RA). Both peptides induced Smad 1/5 phosphorylation and their nuclear translocation. They increased the number and length of neurites and the expression of neuronal markers MAP-2, NeuN and NSE better than did BMP-9. They also promoted differentiation to the cholinergic phenotype more actively than BMP-9, SpBMP-9 being the most effective as shown by increases in intracellular acetylcholine, ChAT and VAchT. Finally, both peptides activated the PI3K/Akt pathway and inhibited GSK3beta, a current AD therapeutic target. BMP-9-derived peptides, especially SpBMP-9, with or without RA, are promising molecules that warrant further investigation.

Effects of BMP-9 and BMP-2 on the PI3K/Akt Pathway in MC3T3-E1 Preosteoblasts.

The bone morphogenetic proteins (BMPs), which are involved in bone formation and repair, play an important role in tissue engineering. For example, BMP-9 and BMP-2, which are members of different BMP subfamilies, are osteoinductive factors. However, several studies have recently shown that BMP-9 is more osteogenic than BMP-2. We have previously shown that fetal bovine serum (FBS) strongly enhances the osteoblast differentiation of murine preosteoblasts (MC3T3-E1) to BMP-9 but not to BMP-2. This effect is mimicked by IGF-2, which primarily activates the PI3K/Akt pathway, but how Akt phosphorylation sites are implicated in such differentiation is unclear. The effects of BMP-9 and BMP-2 with or without FBS or IGF-2 on Akt phosphorylation sites and subsequent osteoblastic differentiation were determined, respectively, by western blot analysis and alkaline phosphatase activity measurements. The involvement of phosphorylated Akt at Thr308 and/or Ser473 on BMP-mediated osteoblast differentiation was further studied using specific inhibitors. In MC3T3-E1 incubated with or without FBS, BMP-9 and BMP-2 activate Akt on Ser473 and Thr308 very differently in a time and dose-dependent manner. Using inhibitors specific to each Akt phosphorylation site, we showed that both Ser473 and Thr308 must be phosphorylated for BMP-9 and/or IGF-2-induced osteoblast differentiation, whereas BMP-2 requires phosphorylation of only Ser473. Furthermore, cells stimulated with BMP-2 in the presence of FBS require the phosphorylation of Akt at Ser473 and the dephosphorylation of Akt at Thr308 to increase the osteoblast differentiation with alkaline phosphatase activity similar to that of BMP-9 plus FBS. These results provide a better understanding into how BMP-9 induces osteoblast differentiation and its synergy with IGF-2 at the signaling level. This knowledge is essential for preparing the serum-free osteogenic media required for bone tissue engineering or developing growth factor delivery systems to improve bone formation.

Interactions between bone cells and biomaterials: An update.

As the populations of the Western world become older, they will suffer more and more from bone defects related to osteoporosis (non-union fractures, vertebral damages), cancers (malignant osteolysis) and infections (osteomyelitis). Autografts are usually used to fill these defects, but they have several drawbacks such as morbidity at the donor site and the amount and quality of bone that can be harvested. Recent scientific milestones made in biomaterials development were shown to be promising to overcome these limitations. Cell interactions with biomaterials can be improved by adding at their surface functional groups such as adhesive peptides and/or growth factors. The development of such biomimetic materials able to control bone cell responses can only proceed if it is based on a sound understanding of bone cell behavior and regulation. This review focuses on bone physiology and the regulation of bone cell differentiation and function, and how the latest advances in biomimetic materials can be translated within promising clinical outcomes.

Modulation of MAPK signalling by immobilized adhesive peptides: Effect on stem cell response to BMP-9-derived peptides.

Biomimetic materials were developed to regulate stem cell behaviour. We have analyzed the influence of polycaprolactone (PCL) films, functionalized with adhesive peptides derived from fibronectin (pFibro) or bone sialoprotein (pBSP), on the response of murine multipotent C3H10T1/2 cells to bone morphogenetic protein-9 (BMP-9) and its derived peptides (pBMP-9 and SpBMP-9). PCL-pFibro promoted better cell cytoskeleton organization and faster focal adhesion kinase activation than did PCL-pBSP. PCL-pFibro also promoted MAPK signalling to improve the cell response to BMP-9 by inactivating ERK1/2 and stimulating p38 and JNK. BMP-9, pBMP-9 and SpBMP-9 induced greater phosphorylation of Smad1/5/8 in cells attached to PCL-pFibro than in cells on PCL-pBSP. These phosphorylated Smad1/5/8 were translocated to the nucleus. BMP-9 and its derived peptides restored the phosphorylation of JNK in cells on PCL-pBSP, but it remained less phosphorylated than in cells on PCL-pFibro stimulated with pBMP-9 and SpBMP-9. Cells attached to PCL-pFibro contained more Runx2, essential for stem cell commitment to become osteoblasts, than did cells on PCL-pBSP when incubated with BMP-9 and its derived peptides. Runx2 was no longer detected when the cells were pre-treated with JNK inhibitor. Therefore pFibro plus BMP-9 and its derived peptides may be a promising strategy to develop biomimetic materials. STATEMENT OF SIGNIFICANCE: Biomaterials functionalized with adhesive peptides to favour bone repair have generated a great interest over the past decade. However, the effect of these materials on the ability of cells to respond to growth factors remains poorly known. One major growth factor subfamily involved in bone formation is the bone morphogenetic protein (BMP). However, these BMPs are expensive. We therefore developed less costly derived molecules. We showed how adhesive peptides derived from bone matrix proteins grafted onto polymer films affect the intracellular signalling and thus the ability of stem cells to be activated by BMP and its derived molecules. We have therefore identified a combination of bioactive polymers and BMP molecules that direct the stem cells towards bone forming cells.

Prospective heterotopic ossification progenitors in adult human skeletal muscle.

Skeletal muscle has strong regenerative capabilities. However, failed regeneration can lead to complications where aberrant tissue forms as is the case with heterotopic ossification (HO), in which chondrocytes, osteoblasts and white and brown adipocytes can arise following severe trauma. In humans, the various HO cell types likely originate from multipotent mesenchymal stromal cells (MSCs) in skeletal muscle, which have not been identified in humans until now. In the present study, adherent cells from freshly digested skeletal muscle tissue were expanded in defined culture medium and were FACS-enriched for the CD73(+)CD105(+)CD90(-) population, which displayed robust multilineage potential. Clonal differentiation assays confirmed that all three lineages originated from a single multipotent progenitor. In addition to differentiating into typical HO lineages, human muscle resident MSCs (hmrMSCs) also differentiated into brown adipocytes expressing uncoupling protein 1 (UCP1). Characterizing this novel multipotent hmrMSC population with a brown adipocyte differentiation capacity has enhanced our understanding of the contribution of non-myogenic progenitor cells to regeneration and aberrant tissue formation in human skeletal muscle.

Effect of initial pBMP-9 loading and collagen concentration on the kinetics of peptide release and a mathematical model of the delivery system.

Type I collagen is one of the most widely used materials for drug delivery in tissue repair. It is the reference carrier for delivering growth factors like bone morphogenetic proteins (BMPs such as BMP-2 and BMP-7) for bone repair. Since BMPs are expensive to produce, we have developed a peptide derived from BMP-9 (pBMP-9) that is 300 times less expensive than the entire protein while still promoting osteogenic differentiation. We have now evaluated the effects of the collagen concentration and the initial pBMP-9 load on peptide release. We then developed a model of pBMP-9 release kinetics by finite differences using a system based on Fick's second law in which the interactions between the peptide and collagen fibers are assumed to follow Langmuir adsorption kinetics. The Langmuir isotherms suggest that the structure of the collagen gel influences the strength of its electrostatic interaction with the peptide, since increasing the collagen concentration decreased the affinity of pBMP-9 for the collagen. The resulting model of the mechanism accurately reflects the experimental data and the parameters estimated indicate that the diffusivities with the different collagen concentrations are similar, whereas the mass transfer coefficient increases with the collagen concentration. The results also indicate that perfect sink conditions cannot be assumed and suggest the presence of an optimal collagen concentration. Finally, we have correlated our conclusions with the differences in collagen fiber organization observed by transmission electron microscopy.

Preosteoblasts behavior in contact with single-walled carbon nanotubes synthesized by radio frequency induction thermal plasma using various catalysts.

The influence of single-walled carbon nanotubes (SWCNTs) produced by radio frequency (RF) induction thermal plasma with three catalyst mixtures (Ni-Co-Y2 O3 , Ni-Y2 O3 and Ni-Mo-Y2 O3 ) was evaluated on the behavior of murine MC3T3-E1 preosteoblasts. After analyzing SWCNTs properties, mitochondrial enzymatic (MTS) and lactate dehydrogenase (LDH) activities as well as neutral red (NR) uptake were measured to assess the cellular viability. To ascertain that the cytotoxicity was not merely as a result of the mechanical disturbance, either SWCNTs were added on the attached cells or cells were seeded on the SWCNT-covered plates. Regardless of the catalyst mixtures used for their production, SWCNTs added on the attached cells reduced cell viability drastically in a dose-dependent manner. However, the viability of cells seeded on SWCNTs even on those produced with Ni-Co-Y2 O3 was slightly decreased at 24 h and besides cells could proliferate within 48 h. Furthermore, cells were able to organize normal filamentous actin cytoskeleton and no apoptotic cells were detected in the cultures. Thus except mechanical disturbance, thermal plasma grown SWCNTs seem to induce no severe cytotoxicity on MC3T3-E1 preosteoblasts and therefore are considered promising CNTs to be studied more deeply for future applications in bone tissue engineering.