Nanocomposite microbeads made of recycled polylactic acid for the magnetic solid phase extraction of xenobiotics from human urine.

Nanocomposite microbeads (average diameter = 10-100 µm) were prepared by a microemulsion-solidification method and applied to the magnetic solid-phase extraction (m-SPE) of fourteen analytes, among pesticides, drugs, and hormones, from human urine samples. The microbeads, perfectly spherical in shape to maximize the surface contact with the analytes, were composed of magnetic nanoparticles dispersed in a polylactic acid (PLA) solid bulk, decorated with multi-walled carbon nanotubes (mPLA@MWCNTs). In particular, PLA was recovered from filters of smoked electronic cigarettes after an adequate cleaning protocol. A complete morphological characterization of the microbeads was performed via Fourier-transform infrared (FTIR) spectroscopy, UV-Vis spectroscopy, thermogravimetric and differential scanning calorimetry analysis (TGA and DSC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The recovery study of the m-SPE procedure showed yields ≥ 64%, with the exception of 4-chloro-2-methylphenol (57%) at the lowest spike level (3 µg L-1). The method was validated according to the main FDA guidelines for the validation of bioanalytical methods. Using liquid chromatography-tandem mass spectrometry, precision and accuracy were below 11% and 15%, respectively, and detection limits of 0.1-1.8 µg L-1. Linearity was studied in the range of interest 1-15 µg L-1 with determination coefficients greater than 0.99. In light of the obtained results, the nanocomposite microbeads have proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being synthetized from recycled plastic material. One of the main objectives of the current work is to provide an innovative and optimized procedure for the recycling of a plastic waste, to obtain a regular and reliable microstructure, whose application is here presented in the field of analytical chemistry. The simplicity and greenness of the method endows the procedure with a versatile applicability in different research and industrial fields.

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation.

Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58-68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.

Biomonitoring of pesticides in urine by using isoamyl acetate as a sustainable extraction solvent.

The protection of the health and safety of workers in the agricultural sector requires the assessment of human exposure to pesticides through biomonitoring programs. In doing this, the health and safety of laboratory analysts should be also protected through the use of analytical procedures as safe as possible. According to Green Analytical Chemistry and Green Sample Preparation principles, the use of miniaturized extraction techniques such as dispersive liquid-liquid microextraction (DLLME) should be encouraged, with the aim of limiting the consumption of chemicals (solvents and reagents) and energy, as well as the production of wastes. Moreover, safer and more environmentally friendly alternatives to petroleum-derived solvents must be found. In this regard, the effort of researchers is focused on the development/identification of sustainable solvents, some of which have been ranked according to their disposal, environmental, safety, and health features. Here, we introduce the alternative use of isoamyl acetate ("banana oil") as sustainable extraction solvent. Compared with the trendy class of eutectic solvents (ESs), isoamyl acetate is advantageous because it is already in the liquid state, which fasters operations, and because it can be evaporated to dryness and reconstituted in a solvent compatible with the mobile chromatographic phase, which is not an option for ESs. The applicability of isoamyl acetate has been here evaluated for the first time to extract 12 pesticides of different polarities from urine matrix, by using a DLLME approach. The HPLC/MS validated method has proven to possess the sensitivity, precision and accuracy required to reliable bioanalytical methods. Its cheapness, simplicity and quickness make it an ideal sustainable choice for the screening of large numbers of samples in health monitoring programs involving people occupationally-exposed to pesticides.