Pharmacological Activity of Matrine in Inhibiting Colon Cancer Cells VM Formation, Proliferation, and Invasion by Downregulating Claudin-9 Mediated EMT Process and MAPK Signaling Pathway.

Purpose: Matrine (Mat), the main active ingredient of traditional Chinese herbal plant Sophora flavescens Ait, has significant antitumor effects, but its pharmacological mechanism on colon cancer (CC) remains unclear. This study aimed to investigate the therapeutic effect of Mat on CC as well as the potential mechanism. Methods: The vasculogenic mimicry (VM) of CC cells was observed by three-dimensional (3D) Matrigel cell culture. Cell proliferation, apoptosis, migration, invasion, and actin filament integrity were detected by CCK8, flow cytometry, wound healing, Transwell and Phalloidin staining assays. qRT-PCR and Western blotting were applied to detect the expression of EMT factors. RNA-sequencing was conducted to screen differentially expressed genes (DEGs), and the GO and KEGG pathway enrichment analyses were performed. Then, the expression of the key MAPK pathway genes and the target gene Claudin-9 (Cldn9) were analyzed. RNA interference was used to silence Cldn9 expression, and the effects of Cldn9 silencing and simultaneous treatment with Mat on VM formation, proliferation, apoptosis, invasion, and migration were investigated. Finally, the expression of EMT factors and MAPK pathway key genes was detected. Results: CT26 cells formed the most typical VM structure. Mat disrupted the VM of CT26 cells, significantly suppressed their proliferation, migration, invasion, actin filament integrity, induced apoptosis, and inhibited EMT process. RNA-sequencing revealed 163 upregulated genes and 333 downregulated genes in Mat-treated CT26 cells, and the DEGs were significantly enriched in cell adhesion molecules and MAPK signaling pathways. Further confirmed that Mat significantly inhibited the phosphorylation levels of JNK and ERK, and the target gene Cldn9 was significantly upregulated in human CC tissues. Silencing Cldn9 markedly inhibited the VM, proliferative activity, invasiveness, and actin filament integrity of CT26 cells, blocked the EMT process, and downregulated the phosphorylation of JNK and ERK, whereas Mat intervention further strengthened the above trends. Conclusion: This study indicated that Mat may synergistically inhibit the EMT process and MAPK signaling pathway through downregulation Cldn9, thereby exerting pharmacological effects on inhibiting VM formation, proliferation, and invasion of CC cells.

Bifunctional scaffolds for tumor therapy and bone regeneration: Synergistic effect and interplay between therapeutic agents and scaffold materials.

Bone tumor patients often face the problems with cancer cell residues and bone defects after the operation. Therefore, researchers have developed many bifunctional scaffolds with both tumor treatment and bone repair functions. Therapeutic agents are usually combined with bioactive scaffolds to achieve the "bifunctional". However, the synergistic effect of bifunctional scaffolds on tumor therapy and bone repair, as well as the interplay between therapeutic agents and scaffold materials in bifunctional scaffolds, have not been emphasized and discussed. This review proposes a promising design scheme for bifunctional scaffolds: the synergistic effect and interplay between the therapeutic agents and scaffold materials. This review summarizes the latest research progress in bifunctional scaffolds for therapeutic applications and regeneration. In particular, it summarizes the role of tumor therapeutic agents in bone regeneration and the role of scaffold materials in tumor treatment. Finally, a perspective on the future development of bifunctional scaffolds for tumor therapy and bone regeneration is discussed.

Synergistic Effect of Surface Chemistry and Surface Topography Gradient on Osteogenic/Adipogenic Differentiation of hMSCs.

Much attention has been paid to understanding the individual effects of surface chemistry or topography on cell behavior. However, the synergistic influence of both surface chemistry and surface topography on differentiation of human mesenchymal stem cells (hMSCs) should also be addressed. Here, gold nanoparticles were immobilized in an increasing number density manner to achieve a surface topography gradient; a thin film rich in amine (-NH2) or methyl (-CH3) chemical groups was plasma-polymerized to adjust the surface chemistry of the outermost layer (ppAA and ppOD, respectively). hMSCs were cultured on these model substrates with defined surface chemistry and surface topography gradient. The morphology and focal adhesion (FA) formation of hMSCs were first examined. hMSC differentiation was then co-induced in osteogenic and adipogenic medium, as well as in the presence of extracellular-signal-regulated kinase1/2 (ERK1/2) and RhoA/Rho-associated protein kinase (ROCK) inhibitors. The results show that the introduction of nanotopography could enhance FA formation and osteogenesis but inhibited adipogenesis on both ppAA and ppOD surfaces, indicating that the surface chemistry could regulate hMSC differentiation, in a surface topography-dependent manner. RhoA/ROCK and ERK1/2 signaling pathways may participate in this process. This study demonstrated that surface chemistry and surface topography can jointly affect cell morphology, FA formation, and thus osteogenic/adipogenic differentiation of hMSCs. These findings highlight the importance of the synergistic effect of different material properties on regulation of cell response, which has important implications in designing functional biomaterials.

Somatic Mutation Profiling of Papillary Thyroid Carcinomas by Whole-exome Sequencing and Its Relationship with Clinical Characteristics.

The incidence of papillary thyroid carcinomas (PTCs) has increased rapidly during the past several decades. Until now, the mechanisms underlying the tumorigenesis of PTCs have remained largely unknown. Next-generation-sequencing (NGS) provides new ways to investigate the molecular pathogenesis of PTCs. To characterize the somatic alterations associated with PTCs, we performed whole-exome sequencing (WES) of PTCs from 23 Chinese patients. This study revealed somatic mutations in genes with relevant functions for tumorigenesis, such as BRAF, BCR, CREB3L2, DNMT1, IRS2, MSH6, and TP53. We also identified novel somatic gene alterations which may be potentially involved in PTC progression. Gene set enrichment analysis revealed that the cellular response to hormone stimulus, epigenetic modifications, such as protein/histone methylation and protein alkylation, as well as MAPK, PI3K-AKT, and FoxO/mTOR signaling pathways, were significantly altered in the PTCs studied here. Moreover, Protein-Protein Interaction (PPI) network analysis of our mutated gene selection highlighted EP300, KRAS, PTEN, and TP53 as major core genes. The correlation between gene mutations and clinicopathologic features of the PTCs defined by conventional ultrasonography (US) and contrast-enhanced ultrasonography (CEUS) were assessed. These analyses established significant associations between subgroups of mutations and respectively taller-than-wide, calcified, and peak time iso- or hypo-enhanced and metastatic PTCs. In conclusion, our study supplements the genomic landscape of PTCs and identifies new actionable target candidates and clinicopathology-associated mutations. Extension of this study to larger cohorts will help define comprehensive genomic aberrations in PTCs and validate target candidates. These new targets may open methods of individualized treatments adapted to the clinicopathologic specifics of the patients.

Elevated PCT at ICU discharge predicts poor prognosis in patients with severe traumatic brain injury: a retrospective cohort study.

PURPOSE: Disease severity and inflammatory response status are closely related to a poor prognosis and must be assessed in patients with severe traumatic brain injury (STBI) before intensive care unit (ICU) discharge. Whether elevated serum procalcitonin (PCT) levels can predict a poor prognosis in STBI patients before ICU discharge is unclear. METHODS: This retrospective observational cohort study enrolled 199 STBI patients who were in the ICU for at least 48 hours and survived after discharge. Based on serum PCT levels at discharge, patients were divided into the high-PCT group (PCT ≥ 0.25 ng/mL) and the low-PCT group (PCT < 0.25 ng/mL). We assessed the relationship between serum PCT levels and a poor prognosis. RESULTS: The high-PCT group had a higher rate of adverse outcomes compared with the low-PCT group. Multivariate logistic regression analysis showed that the Acute Physiology and Chronic Health Evaluation II (APACHE II) score, Sequential Organ Failure Assessment (SOFA) score, white blood cell (WBC) count, C-reactive protein (CRP) level, and PCT level at discharge were significantly associated with adverse outcomes. CONCLUSIONS: Elevated PCT levels at ICU discharge were associated with a poor prognosis in STBI patients. The serum PCT level as a single indicator has limited value for clinical decision-making.

Comprehensive circular RNA profiling reveals that hsa_circ_0001368 is involved in growth hormone-secreting pituitary adenoma development.

Growth hormone-secreting pituitary adenoma (GHPA) represents about 20% of all histological subtypes of pituitary adenoma (PA), which may result in serious complications and shortened lifespan via growth-hormone (GH) hypersecretion. To date, no biomarkers of early diagnosis or therapeutic targets for GHPA treatment have yet been found. Recently, growing evidence has indicated that circular RNAs (circRNAs) are critical for the development and progression of numerous diseases, including cancers; however, their role in the pathogenesis of GHPA has not been reported. Here, we revealed the expression profile of circRNAs in GHPA using a circRNA microarray, and found 1938 circRNAs were upregulated and 1601 circRNAs were downregulated in GHPA versus normal control. Then the ten most up-regulated circRNAs were selected for the mapping of a circRNA-miRNA-target gene interaction network. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses further indicate that target genes were mostly enriched in the mTOR and the Wnt signaling pathway. Among these differentially expressed circRNAs, hsa_circ_0001368 was verified significant up-regulated by qRT-PCR, which was specific up-regulated in GHPA and correlated with the invasiveness and serum GH level of GHPA; functional studies indicated that knockdown of hsa_circ_0001368 significantly inhibited the proliferation, invasion and GH secreting level of GHPA primary culture cells. Moreover, hsa_circ_0001368 had a significant positive correlation with the pituitary-specific transcription factor Pit-1. In conclusion, our study identified a wealth of candidate circRNAs involved in GHPA and proposed that hsa_circ_0001368 may represent a novel potential biomarker and therapeutic target of GHPA.

Silver nanoparticles stimulate osteogenesis of human mesenchymal stem cells through activation of autophagy.

Aim: Previously, different results have been achieved regarding effects of silver nanoparticles (Ag NPs) on osteogenesis of stem cells and the mechanisms have not been disclosed yet, which are quite important for potential application of Ag NPs in bone reconstruction. Materials & methods: Effects of Ag NPs on osteogenesis of human mesenchymal stem cells (hMSCs) with underlying mechanisms were investigated. Results: Ag NPs at 2.5 and 5 µg/ml increased osteogenic proteins expression and mineralization of hMSCs. Meanwhile, autophagy was activated by Ag NPs and it could be inhibited by 3-methyladenine. Furthermore, osteogenesis induced by Ag NPs could also be reversed by 3-methyladenine. Conclusion: These findings suggest that autophagy is involved in stimulating osteogenesis of hMSCs induced by Ag NPs.

3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations.

Inspired by electrically active tissues, conductive materials have been extensively developed for electrically active tissue engineering scaffolds. In addition to excellent conductivity, nanocomposite conductive materials can also provide nanoscale structure similar to the natural extracellular microenvironment. Recently, the combination of three-dimensional (3D) printing and nanotechnology has opened up a new era of conductive tissue engineering scaffolds exhibiting optimized properties and multifunctionality. Furthermore, in the case of two-dimensional (2D) conductive film scaffolds such as periosteum, nerve membrane, skin repair, etc., the traditional preparation process, such as solvent casting, produces 2D films with defects of unequal bubbles and thickness frequently. In this study, poly-l-lactide (PLLA) conductive scaffolds incorporated with polypyrrole (PPy) nanoparticles, which have multiscale structure similar to natural tissue, were prepared by combining extrusion-based low-temperature deposition 3D printing with freeze-drying. Furthermore, we creatively integrated the advantages of 3D printing and solvent casting and successfully developed a 2D conductive film scaffold with no bubbles, uniform thickness, and good structural stability. Subsequently, the effects of concentration and morphology of PPy nanoparticles on electrical properties and mechanical properties of 3D conductive scaffolds and 2D conductive films scaffolds have been studied, which provided a new idea for the design of both 2D and 3D electroactive tissue engineering scaffolds.

Micro/nanostructured TiO2/ZnO coating enhances osteogenic activity of SaOS-2 cells.

Although titanium implants account for a large proportion of the commercial dental market, their bioactivity are inadequate in many applications. A micro- and nano- scale hierarchical surface topography of the implant is suggested for rapid osseointegration from the biomimetic perspective. Moreover, Zinc (Zn) is an essential element in the skeletal system. Thus, a micro/nanostructured TiO2/ZnO coating, produced by micro-arc oxidation, and hydrothermal treatment, and heat treatment, was designed to endow the implant surface with enhanced osteogenic capacity. Physiochemical properties and biological effects of this coating were investigated in our study. The annealed micro/nanostructured TiO2/ZnO coating exhibited higher hydrophilicity and fibronectin adsorption ability compared to the micro-arc oxidation modified TiO2 coating. SaOS-2 cells grown on the annealed micro/nanostructured TiO2/ZnO coating showed increased alkaline phosphatase activity and collagen secretion, and immunofluorescence labeling revealed an upregulation of osteopontin, collagen type ι and osteocalcin. The micro/nanostructure and incorporation of Zn were considered to perform positive effect on the enhanced osteogenic activity of SaOS-2 cells. In conclusion, the micro/nanostructured TiO2/ZnO structure is simple, stable, and easy to produce and scale up, has promising applications in the surface modification of titanium implants.

Effect of in vitro collagen fibrillogenesis on Langmuir-Blodgett (LB) deposition for cellular behavior regulation.

Collagen fibrillogenesis is of special significance for the maintenance of collagen scaffold's mechanical stability and biological performance. Comprehensive information about the mechanism of collagen fibrillogenesis in vitro, as well as the effect of fibrillogenesis on deposited layers of ordered collagen molecules for cellular behavior regulation is thus crucial. In the current study, the pH, phosphate ion as well as reconstitution time impacting on the in vitro fibrillogenesis was systematically investigated, including the zeta potential and turbidity measurement. Furthermore, the fibrillogenesis impacting on the π-a isotherms of collagen assembly at the air/water interface was then fully evaluated. By applying LB technique, collagen fibril-assembling arrays structure can be successfully transferred to form surface deposition onto the mica and glass substrate. The morphology and collagen content were subsequently assessed by atomic force microscopy (AFM) and hydrolyzing examination respectively. Effect of collagen LB deposition on the adhesion and proliferation of SD rat bone marrow mesenchymal stem cells were estimated by Rhodamine Phalloidin/DIPI staining and CCK8 proliferation assays. The results show that highly oriented and collagen-abundant thin film can further facilitate cell adhesion and proliferation, indicating an innovative direction for tissue engineering.

Hydroxyapatite/collagen coating on PLGA electrospun fibers for osteogenic differentiation of bone marrow mesenchymal stem cells.

The architecture and composition of bone tissue engineering scaffolds play important roles in modulating the growth of bone tissue. Composite fibers composed of poly(lactic-co-glycolic acid) (PLGA) skeleton coated with hydroxyapatite (HA) or hydroxyapatite/collagen (HA/Col) were successfully produced via electrospinning, biomimetic process, and adsorption. The PLGA skeleton fabricated by electrospinning process with a nanofibrous structure (diameter ranging from 200 to 400 nm) showed a morphologic similarity to the extracellular matrix (ECM). SEM, EDX, and XRD analysis confirmed the presence of HA and Col on the composite fibers. Mesenchymal stem cells were used to evaluate the cellular behaviors including cell attachment and spreading, proliferation, and osteogenic differentiation on these fibers (PLGA, PLGA/HA, and PLGA/HA/Col). The results demonstrated that the HA and HA/Col coating improved the interaction between mesenchymal stem cells and the composite fibers reflected by accelerated cell spreading, increased alkaline phosphatase (ALP) activity and enhanced expression of osteogenic-related genes. The HA/Col coating was more effective in improving this interaction compared with HA coating. The PLGA/HA/Col composite fibers may be promising as a candidate scaffold for bone tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2863-2870, 2018.

Reduced inflammatory response by incorporating magnesium into porous TiO2 coating on titanium substrate.

The implant materials with proper anti-inflammatory and osteogenic properties may be promising for orthopedic applications. The inflammatory response induced by biomaterials has been regarded as one of the critical factors in determining in vivo fate of implants. Therefore, a novel bone biomaterial should have inflammation regulatory effects instead of being completely bio-inert. In the present work, the inflammation regulatory effects of exogenous magnesium (Mg) ions were investigated. Under the stimulation of lipopolysaccharide (LPS), macrophages exposed to Mg2+ exhibited down-regulated gene expressions of M1 markers (CD86, CD11c and inducible nitric oxide synthase (iNOS)) and pro-inflammatory cytokines (tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) and IL-1ß), up-regulated gene expression of M2 marker CD163 and decreased TNF-α release, indicating that Mg2+ could switch macrophages from M1 to M2 phenotype. Thereafter, micro-arc oxidation (MAO) technique was employed to fabricate Mg-containing ceramic coatings on titanium substrates. Macrophages grown on Mg-containing surface were switched from M1 to M2 phenotype with the stimulation of LPS, evidenced by suppressed gene expressions of M1 markers (CD86, CD11c and iNOS) and pro-inflammatory cytokines (TNF-α and IL-1ß), promoted gene expression of M2 marker CD163 and decreased TNF-α release. Moreover, gene expressions of bone morphogenetic protein-2 (BMP-2), BMP-6 and vascular endothelial growth factor (VEGF) were up-regulated on Mg incorporated MAO surface without LPS stimulation. Together, Mg could be used as an anti-inflammatory agent for suppressing inflammation and mediating osteogenesis. The integration of Mg in biomaterials could endow bone biomaterials with anti-inflammatory property.

The Cu-containing TiO2 coatings with modulatory effects on macrophage polarization and bactericidal capacity prepared by micro-arc oxidation on titanium substrates.

The implant materials with both osteogenic and anti-bacterial properties are promising for orthopedic and dental applications. Moreover, the inflammatory response induced by biomaterials has been recently recognized as one of the critical factors in determining implantation fate. A new generation of implant materials should have modulatory effects on the local inflammatory environment such that it favors osteogenesis and osteointegration instead of being bio-inert. In this study, the micro-arc oxidation (MAO) technique was employed to fabricate Cu-containing ceramic coatings on titanium substrates. The macrophages cultured on Cu-containing MAO-fabricated surfaces were polarized to M1 phenotype, evidenced by the high expression levels of inducible nitric oxide synthase (iNOS), low expression levels of arginase1 (Arg1), enhanced pro-inflammatory cytokine interleukin-6 (IL-6) release and inhibited IL-4 and IL-10 (anti-inflammatory cytokines) release. The MAO-treated surface incorporated with larger amounts of Cu (referred as Cu(h)-MAO) could modulate a favorable inflammatory microenvironment for osteoblast-like cell differentiation. Moreover, the macrophages cultured on Cu(h)-MAO surface exhibited enhanced bacteria uptake and killing rate, indicating that the Cu(h)-MAO surface promoted the bactericidal capacity of macrophages. Together, Cu could be used as a promising modulatory agent for macrophage functions. The integration of Cu in biomaterials could lead to enhanced macrophage-mediated osteogenesis and bactericidal capacity.

Effects of titanium surface roughness on the mediation of osteogenesis via modulating the immune response of macrophages.

Osteoblastic lineage cells are commonly used to evaluate the in vitro osteogenic ability of bone biomaterials. However, contradictory results obtained from in vivo and in vitro studies are not uncommon. With the increasing understanding of osteoimmunology, the immune response has been recognized as playing an important role in bone regeneration. In this study, we examined the effect of submicron-scaled titanium surface roughness (ranging from approximately 100 to 400 nm) on the response of osteoblasts and macrophages. The results showed that osteoblast differentiation enhanced with increased surface roughness of titanium substrates. The cytoskeleton of macrophages altered with the variation in titanium surface roughness. The production of cytokines (TNF-α, IL-6, IL-4 and IL-10) could be regulated by titanium surface roughness. Moreover, macrophages cultured on titanium surfaces exhibited a tendency to polarize to M1 phenotype with the increase of surface roughness. Material/macrophage conditioned medium tended to promote osteoblast differentiation with the increase of surface roughness. The results indicate that increasing surface roughness in the submicron range is beneficial for osteogenesis via modulating the immune response of macrophages. Modifying biomaterial surfaces based on their immunomodulatory effects is considered as a novel strategy for the improvement of their biological performance.

Effects of the hierarchical macro/mesoporous structure on the osteoblast-like cell response.

To improve the success of medical devices, implants with strong surface bioactivity are urgently required. Coatings with a macroporous structure produced by micro-arc oxidation possess advantages, such as strong adhesion to substrate and excellent resistance to wear and corrosion. Mesoporous structures contain pores with sizes of 2-50 nm, which can endow the biomaterials with the ability to enhance osteogenesis and to be loaded with diverse drugs. Thus, in this study, we aimed to evaluate the effects of both macroporous and mesoporous structures using a hierarchical macro/mesoporous structure to modify the titanium implant surface. The behaviors of SaOS-2 human osteosarcoma cells on the macro/mesoporous structure, including initial adhesion, proliferation, alkaline phosphatase (ALP) activity, and collagen secretion, were investigated. Cells that attached on the macro/mesoporous surface showed the highest cell numbers and greatest spreading area after incubation for 1, 2, and 4 h compared with the polished smooth substrate and macroporous surface in the presence of fetal bovine serum (FBS). However, in the absence of FBS, cell adhesion on the polished substrate, macroporous structure, and macro/mesoporous structure did not differ significantly. Cell proliferation on the macroporous and macro/mesoporous surfaces increased compared with that on the smooth substrate surface. Furthermore, ALP activity and collagen secretion were enhanced on the macro/mesoporous structure. Our findings provided important insights into the cellular responses to macro/mesoporous structures in the field of implant surface modification. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1896-1902, 2018.

The effect of hydroxyapatite nanoparticles on adipogenic differentiation of human mesenchymal stem cells.

Due to its excellent biocompatibility, nanosized hydroxyapatite (nHA) has drawn much attention for various applications in biomedical fields. There are growing concerns about its biosecurity; however, little is known about its effects on adipogenesis. In the present study, nHA with three different sizes were synthesized, and the in vitro effects of nHA on cell proliferation and adipogenic differentiation of human mesenchymal stem cells (hMSCs) were investigated. The results clearly show that nHA does not affect the cell viability, the lipids droplets formation, triglyceride (TG) synthesis, and the expression of adipogenic marker genes/proteins of hMSCs at concentrations lower than 50 µg/mL. It is concluded that the adipogenic differentiation potential of hMSCs is not affected by nHA at noncytotoxic concentrations. These will provide a reference for the applications of nHA in biomedical fields. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1822-1831, 2018.

Amorphous, Smart, and Bioinspired Polyphosphate Nano/Microparticles: A Biomaterial for Regeneration and Repair of Osteo-Articular Impairments In-Situ.

Using femur explants from mice as an in vitro model, we investigated the effect of the physiological polymer, inorganic polyphosphate (polyP), on differentiation of the cells of the bone marrow in their natural microenvironment into the osteogenic and chondrogenic lineages. In the form of amorphous Ca-polyP nano/microparticles, polyP retains its function to act as both an intra- and extracellular metabolic fuel and a stimulus eliciting morphogenetic signals. The method for synthesis of the nano/microparticles with the polyanionic polyP also allowed the fabrication of hybrid particles with the bisphosphonate zoledronic acid, a drug used in therapy of bone metastases in cancer patients. The results revealed that the amorphous Ca-polyP particles promote the growth/viability of mesenchymal stem cells, as well as the osteogenic and chondrogenic differentiation of the bone marrow cells in rat femur explants, as revealed by an upregulation of the expression of the transcription factors SOX9 (differentiation towards osteoblasts) and RUNX2 (chondrocyte differentiation). In parallel to this bone anabolic effect, incubation of the femur explants with these particles significantly reduced the expression of the gene encoding the osteoclast bone-catabolic enzyme, cathepsin-K, while the expression of the tartrate-resistant acid phosphatase remained unaffected. The gene expression data were supported by the finding of an increased mineralization of the cells in the femur explants in response to the Ca-polyP particles. Finally, we show that the hybrid particles of polyP complexed with zoledronic acid exhibit both the cytotoxic effect of the bisphosphonate and the morphogenetic and mineralization inducing activity of polyP. Our results suggest that the Ca-polyP nano/microparticles are not only a promising scaffold material for repairing long bone osteo-articular damages but can also be applied, as a hybrid with zoledronic acid, as a drug delivery system for treatment of bone metastases. The polyP particles are highlighted as genuine, smart, bioinspired nano/micro biomaterials.

Effects of silica-gentamicin nanohybrids on osteogenic differentiation of human osteoblast-like SaOS-2 cells.

INTRODUCTION: In recent years, there has been an increasing interest in silica (SiO2) nanoparticles (NPs) as drug delivery systems. This interest is mainly attributed to the ease of their surface functionalization for drug loading. In orthopedic applications, gentamicin-loaded SiO2 NPs (nanohybrids) are frequently utilized for their prolonged antibacterial effects. Therefore, the possible adverse effects of SiO2-gentamicin nanohybrids on osteogenesis of bone-related cells should be thoroughly investigated to ensure safe applications. MATERIALS AND METHODS: The effects of SiO2-gentamicin nanohybrids on the cell viability and osteogenic differentiation of human osteoblast-like SaOS-2 cells were investigated, together with native SiO2 NPs and free gentamicin. RESULTS: The results of Cell Count Kit-8 (CCK-8) assay show that both SiO2-gentamicin nanohybrids and native SiO2 NPs reduce cell viability of SaOS-2 cells in a dose-dependent manner. Regarding osteogenesis, SiO2-gentamicin nanohybrids and native SiO2 NPs at the concentration range of 31.25-125 µg/mL do not influence the osteogenic differentiation capacity of SaOS-2 cells. At a high concentration (250 µg/mL), both materials induce a lower expression of alkaline phosphatase (ALP) but an enhanced mineralization. Free gentamicin at concentrations of 6.26 and 9.65 µg/mL does not significantly influence the cell viability and osteogenic differentiation capacity of SaOS-2 cells. CONCLUSIONS: The results of this study suggest that both SiO2-gentamicin nanohybrids and SiO2 NPs show cytotoxic effects to SaOS-2 cells. Further investigation on the effects of SiO2-gentamicin nanohybrids on the behaviors of stem cells or other regular osteoblasts should be conducted to make a full evaluation of the safety of SiO2-gentamicin nanohybrids in orthopedic applications.

Inorganic polyphosphate induces accelerated tube formation of HUVEC endothelial cells.

In this study, the effect of inorganic polyphosphate (polyP) on the initial phase of angiogenesis and vascularization was investigated, applying the HUVEC cell tube formation assay. PolyP is a physiological and high energy phosphate polymer which has been proposed to act as a metabolic fuel in the extracellular space with only a comparably low ATP content. The experiments revealed that polyP accelerates tube formation of human umbilical vein endothelial cells (HUVEC), seeded onto a solidified basement membrane extract matrix which contains polyP-metabolizing alkaline phosphatase (ALP) activity. This effect is abolished by co-addition of apyrase, which degrades ATP to AMP and inorganic phosphate. The assumption that ATP, derived from polyP, activates HUVEC cells leading to tube formation was corroborated by experiments showing that addition of polyP to the cells causes a strong rise of ATP level in the culture medium. Finally, we show that at a later stage of cultivation of HUVEC cells, after 3 d, polyP causes a strong enhancement of the expression of the genes encoding for the two major matrix metalloproteinases (MMPs) released by endothelial cells during tube formation, MMP-9 and MMP-2. This stimulatory effect is again abrogated by addition of apyrase together with polyP. From these results, we propose that polyP is involved either directly or indirectly in energy supply, via ALP-mediated transfer of energy-rich phosphate under ATP formation. This ATP is utilized for the activation and oriented migration of endothelial cells and for the matrix organization during the initial phases of tube formation.

A cyclo-trimer of acetonitrile combining fluorescent property with ability to induce osteogenesis and its potential as multifunctional biomaterial.

A biomaterial combining fluorescent property with ability to induce osteogenesis can serve as an ideal multifunctional scaffold in bone tissue engineering. However, the frequently used fluorescent agents can only serve as imaging probes. The polymer or oligomer with a conjugated system containing nitrogen atoms will fulfill these criteria. In this study, a cyclo-trimer of acetonitrile is synthesized using a facile method, which is proved to be 4-amino-2,6-dimethylpyrimidine. The cyclo-trimer of acetonitrile demonstrates strong intrinsic photoluminescence and has the potential for in vivo imaging. The cyclo-trimer of acetonitrile shows no toxicity both in vitro and in vivo. Moreover, the cyclo-trimer of acetonitrile significantly promotes the osteogenesis of SaOS-2 cells by improving alkaline phosphatase activity, collagen type I and osteocalcin expression, as well as expressions of osteoblastic genes, and enhances the matrix mineralization of rBMSCs. Thus, the cyclo-trimer of acetonitrile synthesized in present study illustrates the employment of this kind multifunctional biomaterial in bone tissue engineering and may offer great potential in biomedical applications where bioimaging and osteogenesis are both required. STATEMENT OF SIGNIFICANCE: A conjugated cyclo-trimer of acetonitrile combining intrinsic fluorescent property with ability to induce osteogenesis was reported. Different from the traditional fluorescent dye or quantum dots, which are just "imaging agents", the cyclo-trimer of acetonitrile can serve as a multifunctional biomaterial and offer great potential in biomedical applications where bioimaging and osteogenesis are both required. To our best knowledge, the fluorescent property, especially fluorescent property in vivo and the ability of this molecule to induce osteogenesis have not been reported before. Our work illustrates the employment of this kind multifunctional biomaterial in bone tissue engineering and will highlight the importance of multifunctional biomaterial in biomedical applications.