Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
2.
Radiol Med ; 107(4): 401-7, 2004 Apr.
Artigo em Inglês, Italiano | MEDLINE | ID: mdl-15103291

RESUMO

PURPOSE: To compare the Entrance Surface Dose (ESD) for a normal patient, measured on three types of dedicated digital equipment for chest radiography: an amorphous selenium system, a CR (Computed Radiography) system, and a system for direct radiography (DR) based on an amorphous silicon active matrix (a-Si) connected to a CsI(T1) detector. MATERIALS AND METHODS: The ESD values were measured with different dosimeters placed in the air parallel to the detector plane, and at a distance equal to the thickness of a normal-build patient. The measurements were taken with the radiological parameters (Posterior-Anterior projection (PA) and Lateral projection (L)) used in diagnostic practice to obtain high-quality diagnostic radiographic images. The measurements taken with the DR equipment were repeated after the manufacturer added a 0.2 mm-thick Cu filter. The ESD values obtained by this series of measurements were reported as mean and standard deviation values (M+/-SD). RESULTS: With the PA projection, the doses measured for the different devices were the following: amorphous selenium system 0.12+/-0.06 mGy, CR system 0.3+/-0.05 mGy, DR system 0.05+/-0.02 mGy. With the L projection: amorphous selenium system 0.40+/-0.13 mGy, CR system 0.9+/-0.17 mGy, and DR system 0.21+/-0.15 mGy. CONCLUSIONS: The use of digital systems allows a significant reduction of the patient dose. In particularly the Direct Radiography system, based on a CsI/a-Si detector, administers the lowest patient dose.


Assuntos
Radiografia Torácica/métodos , Doses de Radiação , Intensificação de Imagem Radiográfica
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA