Retentive design of a small surgical guide for implant surgery: An in-vitro study.

OBJECTIVES: Instability of the surgical guide is an overlooked factor that can result in a difference between the planned and the actual positions of an implant. Our aim was to compare the stability of the retentive surgical guide (RSG) with a conventional surgical guide (CSG) in an in-vitro experiment. METHODS: A platform to evaluate the stability of the surgical guide was designed using 3D-modelling software (Meshmixer 3.5, Autodesk). Imaging data from 15 patients with a single missing tooth were used to plan the virtual implant. Two surgical guides were designed (Blue Sky Plan 4.8, Blue Sky Bio) and 3D printed (Form2, Dental SG resin, Formlabs) for each case: the CSG with the default, predetermined software settings, and the RSG, designed on a dental model with a 0.1-mm undercut and altered production parameters (reduced guide-to-teeth offset of 0.07 mm, reduced guide thickness of 2.3 mm and a retentive clasp in a marginal area). The dental models were reproducibly secured on the testing platform using a digital force gauge, and the surgical guides were positioned. An increasing force of 0.1 N, 1 N, 2.5 N, and 5 N was sequentially applied from the buccal and the oral directions to the surgical guide via a drill handle. For each force, either the magnitude of the guide's displacement was captured with an intra-oral scanner (CEREC Omnicam AC, Dentsply Sirona; software version: SW 4.5.2) or the dislodgement of the guide was recorded. Scans were imported for analysis (GOM Inspect 2018, GOM GmbH), and library files of the surgical guides and implants were superimposed as a joined complex. The deviation of the implant's position was calculated from the displacement of the guide's position RESULTS: Three-way repeated measures using ANOVA revealed a more significant guide displacement and virtually projected implant deviation in the CSG group than the RSG group and with increasing force in all the deviation parameters. Both groups showed greater resistance to the displacement with the force applied from the oral direction than the buccal direction. The application of the force in the buccal direction resulted in guide dislodgements of 13% and 0% for the CSG and RSG, respectively. In the oral direction, the dislodgement rates were 33% and 7% for the CSG and RSG, respectively. CONCLUSIONS: Within the limitations of this study, the retentive design increased the stability of the surgical guide and, consequently, the accuracy of the virtually projected implants in comparison to the conventional surgical guide designed using the default settings. Clinical trials are needed to confirm its advantages in clinical use. CLINICAL SIGNIFICANCE: With a simple modification to the design, the surgical guide retention provided greater stability, with smaller deviations under loading; this resulted in improved implant precision parameters without requiring additional materials or software. Further studies are needed to assess the clinical feasibility of this surgical guide with improved retention and function.

Bilateral parotid glands aplasia: a case report and literature review.

OBJECTIVES: Bilateral parotid gland aplasia is a rare congenital anomaly that almost consistently leads to xerostomia and caries. It is often associated with other congenital craniofacial abnormalities. The objective was to describe a case with asymptomatic bilateral parotid gland aplasia and to review previously reported cases. METHODS: Panoramic radiograph, computed tomography and magnetic resonance imaging were obtained and an in-depth assessment of patient's dental status and sequence analysis of FGF10, FGFR2 and FGFR3 genes were performed. Previous reports of bilateral parotid gland aplasia were assessed. RESULTS: In a 64-year-old woman with extensive basal cell carcinoma of nasal skin an incidental bilateral parotid gland aplasia was noted during radiotherapy treatment planning. Dental status revealed surprisingly numerous (n = 15) teeth without active caries lesions. No other craniofacial abnormalities were identified. To rule out most probable syndromes associated with parotid gland aplasia, sequence analysis of FGF10, FGFR2 and FGFR3 genes was performed showing no pathogenic variants. With a literature review, we identified 148 cases of salivary gland aplasia in which median age at diagnosis was 21 years and one third were asymptomatic. In only 10 of these cases, the patients presented with bilateral aplasia of parotid glands without other craniofacial abnormalities. CONCLUSIONS: Absence of salivary glands can have a debilitating effect on oral health and is often accompanied by other craniofacial abnormalities. However, relatively frequent asymptomatic course suggests that this rare malformation is probably underdiagnosed. Therefore, we propose systematic reporting of salivary gland aplasia to assess its true prevalence in general population.

The precision of gingival recession measurements is increased by an automated curvature analysis method.

BACKGROUND: The extent of gingival recession represents one of the most important measures determining outcome of periodontal plastic surgery. The accurate measurements are, thus, critical for optimal treatment planning and outcome evaluation. Present study aimed to introduce automated curvature-based digital gingival recession measurements, evaluate the agreement and reliability of manual measurements, and identify sources of manual variability. METHODS: Measurement of gingival recessions was performed manually by three examiners and automatically using curvature analysis on representative cross-sections (n = 60). Cemento-enamel junction (CEJ) and gingival margin (GM) measurement points selection was the only variable. Agreement and reliability of measurements were analysed using intra- and inter-examiner correlations and Bland-Altman plots. Measurement point selection variability was evaluated with manual point distance deviation from an automatic point. The effect of curvature on manual point selection was evaluated with scatter plots. RESULTS: Bland-Altman plots revealed a high variability of examiner's recession measurements indicated by high 95% limits of agreement range of approximately 1 mm and several outliers beyond the limits of agreement. CEJ point selection was the main source of examiner's variability due to smaller curvature values than GM, i.e., median values of - 0.98 mm- 1 and - 4.39 mm- 1, respectively, indicating straighter profile for CEJ point. Scatter plots revealed inverse relationship between curvature and examiner deviation for CEJ point, indicating a threshold curvature value around 1 mm- 1. CONCLUSIONS: Automated curvature-based approach increases the precision of recession measurements by reproducible measurement point selection. Proposed approach allows evaluation of teeth with indistinguishable CEJ that could be not be included in the previous studies.

Real-life dental examination elicits physiological responses different to visual and auditory dental-related stimuli.

BACKGROUND: Previous studies on dental anxiety have examined the psychophysiological responses evoked in dentally anxious subjects by dental-related stimuli, but not during a real-life dental examination, which was achieved in the present study. METHODS: The heart rate, skin conductance level, and heart rate variability of 25 subjects with dental anxiety and 25 healthy controls were examined. Anxiety was determined by the Modified Dental Anxiety Scale and the Dental Anxiety Scale-Revised. The psychophysiological reactions of the two groups were compared during exposure to dental-related pictures, dental-related sounds, and an actual examination in a dental surgery. RESULTS: All the dental-related stimuli provoked an increase in heart rate, i.e. visual stimuli (p<0.001; 95% CI 0.98-3.95 bpm), auditory stimuli (p<0.001; 95% CI 1.34-4.99 bpm), and a dental examination (p<0.001; 95% CI 1.26-5.39 bpm). Dental-related pictures provoked inferior skin conductance level changes compared to dental-related sounds and the dental examination (visual modality vs auditory p<0.001; 95% CI 0.039-0.152; visual modality vs examination p<0.001; 95% CI 0.083-0.275). Heart rate variability manifested in a complex pattern of responses to the dental examination. However, when exposed to all three dental-related stimuli presentation conditions, the heart rate (F = 0.352, p = 0.556), skin conductance level (F = 0.009, p = 0.926), and heart rate variability parameters of subjects with dental anxiety did not differ in comparison to the healthy controls. CONCLUSIONS: This pilot study represents an evaluation of psychophysiological reactions during a real-life dental examination compared to single modality stimuli, and shows that a real-life dental examination provokes an increase in heart rate, heart rate variability and skin conductance level. Additionally, autonomic responses did not differ between the experimental and control groups. The key issue for future studies is the effect of real-life situations on the physiological and psychological state of the subjects, which should be considered when planning new research and studied in depth.

3D computer-aided treatment planning in periodontology: A novel approach for evaluation and visualization of soft tissue thickness.

OBJECTIVE: Current approaches for soft tissue thickness evaluation and visualization still represent a challenge for full extent evaluation and visualization. The aim of this clinical technique article is to introduce a novel approach for comprehensive visualization and precise evaluation of oral soft tissue thickness utilizing a fusion of optical 3D and cone-beam computed tomography (CBCT) images. CLINICAL CONSIDERATIONS: 3D models of the maxilla were obtained by CBCT imaging and intraoral scanning. The CBCT images were reconstructed to standard tessellation language (STL) file format models by segmentation of teeth and bone using implants planning software. 3D soft tissues and teeth models were obtained by intraoral scanning and were exported in STL file format as well. 3D multimodal models were then superimposed using best-fit matching on teeth. Soft tissue thickness was then visualized and evaluated with a 3D color-coded thickness map of gingival and palatal areas created by surface comparison of both 3D models. Additionally, threshold color-coding was used to increase comprehensibility. Palatal areas were further visualized and evaluated for the optimal donor site. CONCLUSIONS: A novel approach for 3D evaluation and visualization of masticatory mucosa thickness presents all available 3D data in a comprehensible, "clinician-friendly" manner, using threshold regions and clinically relevant views. CLINICAL SIGNIFICANCE: Proposed approach could provide comprehensive presurgical treatment planning in periodontal plastic surgery and implantology without additional invasive procedures for the patient, resulting in more predictable treatment, improved outcomes, and reduced risk for complications.

Measurement of Pressures Generated in Root Canal During Er:YAG Laser-Activated Irrigation.

Objective: To measure distribution of pressures along the depth of the root canal during erbium-doped yttrium aluminum garnet (Er:YAG) laser-activated irrigation (LAI) with different modalities and fiber tip (FT) geometries. Background: A new LAI modality based on the delivery of synchronized pairs of Er:YAG laser pulses to generate enhanced irrigant streaming and shock wave emission was recently introduced. However, the influence of FT geometry on efficacy and comparison with single pulse modality is not yet presented. Methods: Pressures within a simulated root canal were simultaneously measured at 5 depths during LAI. Seven FT geometries (conical and cylindrical) and two modalities [Super Short Pulse (SSP) and dual pulse AutoSWEEPS] were compared. Results: Under the same conditions, average pressures using SSP at 20 mJ of laser energy ranged from 111 Pa for a conical 600 µm FT to 225 Pa for a flat 400 µm FT. The measured pressures for the SSP and the AutoSWEEPS at 20 mJ laser energy were 223 and 308 Pa at the most coronal level and 119 and 126 Pa at the apical constriction, respectively. Measured pressures and irrigant penetration depths at different root canal levels were found to be linearly correlated (R2 = 0.82; p < 0.01). Conclusions: The generated pressures get progressively reduced from the coronal toward the apical third of the root canal. A strong dependence on the FT design and laser modality was observed. Within the limitations of the study, the AutoSWEEPS modality is more effective than standard SSP in generating pressures within the root canal, without increasing the risk of extrusion.

Evaluation of Apical Extrusion During Novel Er:YAG Laser-Activated Irrigation Modality.

Objective: To evaluate apical extrusion during a novel erbium-doped yttrium aluminum garnet (Er:YAG) laser-activated irrigation (LAI) modality. Background data: A novel double-pulse Er:YAG modality (AutoSWEEPS) was introduced recently, replacing a single laser pulse with two micropulses that are separated by a varying time delay (which is continuously "swept" between 300 and 600 µsec). Although the proposed method demonstrated increased efficacy, no data were yet available on extrusion. Methods: The extrusion was evaluated on simulated canals (n = 6) using particle imaging velocimetry. In the first two groups, the irrigation device was a syringe coupled to either a 30-G open-ended or side-vented needle, with flow rates of 1, 2, 5, and 15 mL/min. In the second two groups, irrigant activation was performed with an Er:YAG laser, using either a super-short pulse (SSP) or AutoSWEEPS modality. The pulse energies were 5, 10, 20, 30, and 40 mJ and the frequency was 10 Hz. Results: The measured extrusion was most prominent during the open-ended needle irrigation, followed by the vented needle irrigation. Compared with the conventional needle irrigation (CNI), all the studied LAI modalities resulted in ∼3-20 times less extrusion. The AutoSWEEPS modality induced the smallest extrusion rate, which was always <1.5 mm3/sec and was also independent of the laser energy. Conclusions: Within the limitations of the study, our results demonstrate that the SSP and AutoSWEEPS laser-assisted irrigation methods exhibited less extrusion in comparison with CNI methods.