Development of a biofabricated 3Din vitrovessel model for investigating transendothelial migration in stem cell therapy.

Systemic stem cell therapies hold promise for treating severe diseases, but their efficiency is hampered by limited migration of injected stem cells across vascular endothelium towards diseased tissues. Understanding transendothelial migration is crucial for improving therapy outcomes. We propose a novel 3Din vitrovessel model that aids to unravel these mechanisms and thereby facilitates stem cell therapy development. Our model simulates inflammation through cytokine diffusion from the tissue site into the vessel. It consists of a biofabricated vessel embedded in a fibrin hydrogel, mimicking arterial wall composition with smooth muscle cells and fibroblasts. The perfusable channel is lined with a functional endothelium which expresses vascular endothelial cadherin, provides an active barrier function, aligns with flow direction and is reconstructed byin situtwo-photon-microscopy. Inflammatory cytokine release (tumor necrosis factorα, stromal-derived factor (1) is demonstrated in both a transwell assay and the 3D model. In proof-of-principle experiments, mesoangioblasts, known as a promising candidate for a stem cell therapy against muscular dystrophies, are injected into the vessel model, showing shear-resistant endothelial adhesion under capillary-like flow conditions. Our 3Din vitromodel offers significant potential to study transendothelial migration mechanisms of stem cells, facilitating the development of improved stem cell therapies.

A Combination of Flexible Modified Plant Virus Nanoparticles Enables Additive Effects Resulting in Improved Osteogenesis.

Plant virus nanoparticles (VNPs) genetically engineered to present osteogenic cues provide a promising method for biofunctionalizing hydrogels in bone tissue engineering. Flexible Potato virus X (PVX) nanoparticles substantially enhance the attachment and differentiation of human mesenchymal stem cells (hMSCs) by presenting the RGD motif, hydroxyapatite-binding peptide (HABP), or consecutive polyglutamates (E8) in a concentration-dependent manner. Therefore, it is hypothesized that Tobacco mosaic virus nanoparticles, which present 1.6 times more functional peptides than PVX, will meliorate such an impact. This study hypothesizes that cultivating hMSCs on a surface coated with a combination of two VNPs presenting peptides for either cell attachment or mineralization can achieve additionally enhancing effects on osteogenesis. Calcium minerals deposited by differentiating hMSCs increases two to threefold for this combination, while the Alkaline Phosphatase activity of hMSCs grown on the PVX-RGD/PVX-HABP-coated surface significantly surpasses any other VNP combination. Superior additive effects are observed for the first time by employing a combination of VNPs with varying functionalities. It is found that the flexible VNP geometry plays a more critical role than the concentration of functional peptides. In conclusion, various peptide-presenting plant VNPs exhibit an additive enhancing effect offering significant potential for effectively functionalizing cell-containing hydrogels in bone tissue engineering.

Three-dimensional in vitro model of bone metastases of neuroblastoma as a tool for pharmacological evaluations.

In vitro metastatic models are foreseen to introduce a breakthrough in the field of preclinical screening of more functional small-molecule pharmaceuticals and biologics. To achieve this goal, the complexity of current in vitro systems requests an appropriate upgrade to approach the three-dimensional (3D) in vivo metastatic disease. Here, we explored the potential of our 3D ß-tricalcium phosphate (ß-TCP) model of neuroblastoma bone metastasis for drug toxicity assessment. Tailor-made scaffolds with interconnected channels were produced by combining 3D printing and slip casting method. The organization of neuroblastoma cells into a mesenchymal stromal cell (MSC) network, cultured under bioactive conditions provided by ß-TCP, was monitored by two-photon microscopy. Deposition of extracellular matrix protein Collagen I by MSCs and persistent growth of tumor cells confirmed the cell-supportive performance of our 3D model. When different neuroblastoma cells were treated with conventional chemotherapeutics, the ß-TCP model provided the necessary reproducibility and accuracy of experimental readouts. Drug efficacy evaluation was done for 3D and 2D cell cultures, highlighting the need for a higher dose of chemotherapeutics under 3D conditions to achieve the expected cytotoxicity in tumor cells. Our results confirm the importance of 3D geometry in driving native connectivity between nonmalignant and tumor cells and sustain ß-TCP scaffolds as a reliable and affordable drug screening platform for use in the early stages of drug discovery.

Engineering Mesoscopic 3D Tumor Models with a Self-Organizing Vascularized Matrix.

Advanced in vitro systems such as multicellular spheroids and lab-on-a-chip devices have been developed, but often fall short in reproducing the tissue scale and self-organization of human diseases. A bioprinted artificial tumor model is introduced with endothelial and stromal cells self-organizing into perfusable and functional vascular structures. This model uses 3D hydrogel matrices to embed multicellular tumor spheroids, allowing them to grow to mesoscopic scales and to interact with endothelial cells. It is shown that angiogenic multicellular tumor spheroids promote the growth of a vascular network, which in turn further enhances the growth of cocultivated tumor spheroids. The self-developed vascular structure infiltrates the tumor spheroids, forms functional connections with the bioprinted endothelium, and can be perfused by erythrocytes and polystyrene microspheres. Moreover, cancer cells migrate spontaneously from the tumor spheroid through the self-assembled vascular network into the fluid flow. Additionally, tumor type specific characteristics of desmoplasia, angiogenesis, and metastatic propensity are preserved between patient-derived samples and tumors derived from this same material growing in the bioreactors. Overall, this modular approach opens up new avenues for studying tumor pathophysiology and cellular interactions in vitro, providing a platform for advanced drug testing while reducing the need for in vivo experimentation.

Transglutaminase enables highly hydrolytically and proteolytically stable crosslinking of collagen on titanium surfaces and promotes osteogenic differentiation of human mesenchymal stem cells.

Collagen with its bioactive ligand motives would be predestined as coating on bone implant surfaces like titanium hip stems to facilitate receptor-mediated cell adhesion and thereby improve early osseointegration. Unfortunately, collagen as coating exhibits very low proteolytic resistance in vivo. To overcome this limitation, different crosslinking methods of collagen (transglutaminase, GTA, EDC/NHS, riboflavin, and lysyl oxidase) with silanized titanium alloy (Ti6Al4V) were investigated in terms of degradation resistance, hydrolysis stability, tensile strength, and metabolic cell activity. The in vitro osteogenic differentiation ability of human mesenchymal stem cells (hMSCs) induced by the surface modification was evaluated by immunofluorescence of early osteogenic markers, Alizarin red staining, and energy dispersive X-ray spectroscopy. The expression of the adhesion-related protein vinculin was analyzed on the different functionalized surfaces. The results revealed that the enzymatic crosslinker transglutaminase offered high degradation resistance, tensile strength, and hydrolysis stability compared to the other crosslinking reagents tested. Remarkably, the adhesion sequences within the collagen were accessible to the hMSCs despite the transglutaminase crosslinking procedure. In conclusion, the organochemical functionalization of Ti6Al4V surfaces with collagen using transglutaminase holds great potential to facilitate an enhanced interaction with attached bone cells and thereby could potentially improve and accelerate osseointegration of a titanium-based bone implant in vivo.

Protective role of CFTR during fungal infection of cystic fibrosis bronchial epithelial cells with Aspergillus fumigatus.

Lung infection with the fungus Aspergillus fumigatus (Af) is a common complication in cystic fibrosis (CF) and is associated with loss of pulmonary function. We established a fungal epithelial co-culture model to examine the impact of Af infection on CF bronchial epithelial barrier function using Af strains 10AF and AF293-GFP, and the CFBE41o- cell line homozygous for the F508del mutation with (CF+CFTR) and without (CF) normal CFTR expression. Following exposure of the epithelial surface to Af conidia, formation of germlings (early stages of fungal growth) was detected after 9-12 hours and hyphae (mature fungal growth) after 12-24 hours. During fungal morphogenesis, bronchial epithelial cells showed signs of damage including rounding, and partial detachment after 24 hours. Fluorescently labeled conidia were internalized after 6 hours and more internalized conidia were observed in CF compared to CF+CFTR cells. Infection of the apical surface with 10AF conidia, germlings, or hyphae was performed to determine growth stage-specific effects on tight junction protein zona occludens protein 1 (ZO-1) expression and transepithelial electrical resistance (TER). In response to infection with conidia or germlings, epithelial barrier function degraded time-dependently (based on ZO-1 immunofluorescence and TER) with a delayed onset in CF+CFTR cell monolayers and required viable fungi and apical application. Infection with hyphae caused an earlier onset and faster rate of decline in TER compared to conidia and germlings. Gliotoxin, a major Af virulence factor, caused a rapid decline in TER and induced a transient chloride secretory response in CF+CFTR but not CF cells. Our findings suggest growth and internalization of Af result in deleterious effects on bronchial epithelial barrier function that occurred more rapidly in the absence of CFTR. Bronchial epithelial barrier breakdown was time-dependent and morphotype-specific and mimicked by acute administration of gliotoxin. Our study also suggests a protective role for CFTR by turning on CFTR-dependent chloride transport in response to gliotoxin, a mechanism that will support mucociliary clearance, and could delay the loss of epithelial integrity during fungal development in vivo.

3D Printable Gelatin Methacryloyl (GelMA)-Dextran Aqueous Two-Phase System with Tunable Pores Structure and Size Enables Physiological Behavior of Embedded Cells In Vitro.

The restricted porosity of most hydrogels established for in vitro 3D tissue engineering applications limits embedded cells with regard to their physiological spreading, proliferation, and migration behavior. To overcome these confines, porous hydrogels derived from aqueous two-phase systems (ATPS) are an interesting alternative. However, while developing hydrogels with trapped pores is widespread, the design of bicontinuous hydrogels is still challenging. Herein, an ATPS consisting of photo-crosslinkable gelatin methacryloyl (GelMA) and dextran is presented. The phase behavior, monophasic or biphasic, is tuned via the pH and dextran concentration. This, in turn, allows the formation of hydrogels with three distinct microstructures: homogenous nonporous, regular disconnected-pores, and bicontinuous with interconnected-pores. The pore size of the latter two hydrogels can be tuned from ≈4 to 100 µm. Cytocompatibility of the generated ATPS hydrogels is confirmed by testing the viability of stromal and tumor cells. Their distribution and growth pattern are cell-type specific but are also strongly defined by the microstructure of the hydrogel. Finally, it is demonstrated that the unique porous structure is sustained when processing the bicontinuous system by inkjet and microextrusion techniques. The proposed ATPS hydrogels hold great potential for 3D tissue engineering applications due to their unique tunable interconnected porosity.

3D geometry orchestrates the transcriptional landscape of metastatic neuroblastoma cells in a multicellular in vitro bone model.

A key challenge for the discovery of novel molecular targets and therapeutics against pediatric bone metastatic disease is the lack of bona fide in vitro cell models. Here, we show that a beta-tricalcium phosphate (ß-TCP) multicellular 3D in vitro bone microtissue model reconstitutes key phenotypic and transcriptional patterns of native metastatic tumor cells while promoting their stemness and proinvasive features. Comparing planar with interconnected channeled scaffolds, we identified geometry as a dominant orchestrator of proangiogenic traits in neuroblastoma tumor cells. On the other hand, the ß-TCP-determined gene signature was DNA replication related. Jointly, the geometry and chemical impact of ß-TCP revealed a prometastatic landscape of the engineered tumor microenvironment. The proposed 3D multicellular in vitro model of pediatric bone metastatic disease may advance further analysis of the molecular, genetic and metabolic bases of the disease and allow more efficient preclinical target validations.

Bioprinting-associated pulsatile hydrostatic pressure elicits a mild proinflammatory response in epi- and endothelial cells.

During nozzle-based bioprinting, like inkjet and microextrusion, cells are subjected to hydrostatic pressure for up to several minutes. The modality of the bioprinting-related hydrostatic pressure is either constant or pulsatile depending on the technique. We hypothesized that the difference in the modality of hydrostatic pressure affects the biological response of the processed cells differently. To test this, we used a custom-made setup to apply either controlled constant or pulsatile hydrostatic pressure on endothelial and epithelial cells. Neither bioprinting procedure visibly altered the distribution of selected cytoskeletal filaments, cell-substrate adhesions, and cell-cell contacts in either cell type. In addition, pulsatile hydrostatic pressure led to an immediate increase of intracellular ATP in both cell types. However, the bioprinting-associated hydrostatic pressure triggered a pro-inflammatory response in only the endothelial cells, with an increase of interleukin 8 (IL-8) and a decrease of thrombomodulin (THBD) transcripts. These findings demonstrate that the settings adopted during nozzle-based bioprinting cause hydrostatic pressure that can trigger a pro-inflammatory response in different barrier-forming cell types. This response is cell-type and pressure-modality dependent. The immediate interaction of the printed cells with native tissue and the immune system in vivo might potentially trigger a cascade of events. Our findings, therefore, are of major relevance in particular for novel intra-operative, multicellular bioprinting approaches.

A 3D printed in vitro bone model for the assessment of molecular and cellular cues in metastatic neuroblastoma.

Metastasis is a complex and multifactorial process highly dependent on the interaction between disseminated tumor cells and the pre-metastatic niche. The metastatic sites detected in the bone of patients affected by neuroblastoma (NB), a malignancy of the developing sympathetic nervous system, are particularly aggressive. To improve our current knowledge of metastatic tumor cell biology and improve treatment success, appropriate in vitro and in vivo models that more closely resemble the native metastatic niche are needed. In this study, the impact of the geometry of synthetic ß-tricalcium-phosphate (ß-TCP) structures on the interaction of NB tumor cells with the stromal component has been examined. The tumor microenvironment is dynamically shaped by the stroma, which sustains the growth of NB cells inside the metastatic niche. The 3D growth conditions are a determining factor for the cell proliferation rate in ß-TCP. With respect to planar counterparts, channeled 3D ß-TCP structures stimulate more interleukin-6 and Fibronectin production and define Connexin 43 distribution inside the cells. Together, these results highlight how the biomechanical properties of the 3D microenvironment enable tumor cells to form spheroid-shaped arrangements. This, in turn, facilitates their pro-migratory and pro-invasive patterns and mimics the in vivo situation by translating realistic mechanobiological cues to the metastatic NB.

Emerging Neuroblastoma 3D In Vitro Models for Pre-Clinical Assessments.

The potential of tumor three-dimensional (3D) in vitro models for the validation of existing or novel anti-cancer therapies has been largely recognized. During the last decade, diverse in vitro 3D cell systems have been proposed as a bridging link between two-dimensional (2D) cell cultures and in vivo animal models, both considered gold standards in pre-clinical settings. The latest awareness about the power of tailored therapies and cell-based therapies in eradicating tumor cells raises the need for versatile 3D cell culture systems through which we might rapidly understand the specificity of promising anti-cancer approaches. Yet, a faithful reproduction of the complex tumor microenvironment is demanding as it implies a suitable organization of several cell types and extracellular matrix components. The proposed 3D tumor models discussed here are expected to offer the required structural complexity while also assuring cost-effectiveness during pre-selection of the most promising therapies. As neuroblastoma is an extremely heterogenous extracranial solid tumor, translation from 2D cultures into innovative 3D in vitro systems is particularly challenging. In recent years, the number of 3D in vitro models mimicking native neuroblastoma tumors has been rapidly increasing. However, in vitro platforms that efficiently sustain patient-derived tumor cell growth, thus allowing comprehensive drug discovery studies on tailored therapies, are still lacking. In this review, the latest neuroblastoma 3D in vitro models are presented and their applicability for a more accurate prediction of therapy outcomes is discussed.

Attachment of Ultralow Amount of Engineered Plant Viral Nanoparticles to Mesenchymal Stem Cells Enhances Osteogenesis and Mineralization.

Hydrogel-based materials are widely used to mimic the extracellular matrix in bone tissue engineering, although they often lack biofunctional cues. In the authors' previous work, Potato virus X (PVX), a flexible rod-shaped biocompatible plant virus nanoparticle (VNP) with 1270 coat protein subunits, is genetically modified to present functional peptides for generating a bone substitute. Here, PVX is engineered to present mineralization- and osteogenesis-associated peptides and laden in hydrogels at a concentration lower by two orders of magnitude. Its competence in mineralization is demonstrated both on 2D surfaces and in hydrogels and the superiority of enriched peptides on VNPs is verified and compared with free peptides and VNPs presenting fewer functional peptides. Alkaline phosphatase activity and Alizarin red staining of human mesenchymal stem cells increase 1.2-1.7 times when stimulate by VNPs. Engineered PVX adheres to cells, exhibiting a stimulation of biomimetic peptides in close proximity to the cells. The retention of VNPs in hydrogels is monitored and more than 80% of VNPs remain inside after several washing steps. The mechanical properties of VNP-laden hydrogels are investigated, including viscosity, gelling temperature, and compressive tangent modulus. This study demonstrates that recombinant PVX nanoparticles are excellent candidates for hydrogel nanocomposites in bone tissue engineering.

Effects of Strontium-Doped ß-Tricalcium Scaffold on Longitudinal Nuclear Factor-Kappa Beta and Vascular Endothelial Growth Factor Receptor-2 Promoter Activities during Healing in a Murine Critical-Size Bone Defect Model.

It was hypothesized that strontium (Sr)-doped ß-tricalcium phosphate (TCP)-based scaffolds have a positive effect on the regeneration of large bone defects (LBD). Readouts in our mice models were nuclear factor-kappa beta (NF-κB) activity and vascular endothelial growth factor receptor-2 (VEGFR-2) promoter activity during the healing process. A 2-mm critical-size femoral fracture was performed in transgenic NF-κB- and VEGFR-2-luciferase reporter mice. The fracture was filled with a 3D-printed ß-TCP scaffold with or without Sr. A bioluminescence in-vivo imaging system was used to sequentially investigate NF-κB and VEGFR-2 expression for two months. After sacrifice, soft and osseous tissue formation in the fracture sites was histologically examined. NF-κB activity increased in the ß-TCP + Sr group in the latter stage (day 40-60). VEGFR-2 activity increased in the + Sr group from days 0-15 but decreased and showed significantly less activity than the ß-TCP and non-scaffold groups from days 40-60. The new bone formation and soft tissue formation in the + Sr group were significantly higher than in the ß-TCP group, whereas the percentage of osseous tissue formation in the ß-TCP group was significantly higher than in the ß-TCP + Sr group. We analyzed longitudinal VEGFR-2 promoter activity and NF-κB activity profiles, as respective agents of angiogenesis and inflammation, during LBD healing. The extended inflammation phase and eventually more rapid resorption of scaffold caused by the addition of strontium accelerates temporary bridging of the fracture gaps. This finding has the potential to inform an improved treatment strategy for patients who suffer from osteoporosis.

Enhanced osteogenic differentiation of human mesenchymal stromal cells as response to periodical microstructured Ti6Al4V surfaces.

Titanium-based alloys, for example, Ti6Al4V, are frequently employed for load-bearing orthopedic and dental implants. Growth of new bone tissue and therefore osseointegration can be promoted by the implant's microtopography, which can lead to improved long-term stability of the implant. This study investigates the effect that an organized, periodical microstructure produced by an electron beam (EB) technique has on the viability, morphology, and osteogenic differentiation capacity of human mesenchymal stromal cells (hMSC) in vitro. The technique generates topographical features of 20 µm in height with varying distances of 80-240 µm. Applied alterations of the surface roughness and local alloy composition do not impair hMSC viability (>94%) or proliferation. A favorable growth of hMSC onto the structure peaks and well-defined focal adhesions of the analyzed cells to the electron beam microstructured surfaces is verified. The morphological adaptation of hMSC to the underlying topography is detected using a three-dimensional (3D) visualization. In addition to the morphological changes, an increase in the expression of osteogenic markers such as osteocalcin (up to 17-fold) and osteoprotegerin (up to sixfold) is observed. Taken together, these results imply that the proposed periodical microstucturing method could potentially accelerate and enhance osseointegration of titanium-based bone implants.

Influence of Different Cell Types and Sources on Pre-Vascularisation in Fibrin and Agarose-Collagen Gels.

Vascularisation is essential for the development of tailored, tissue-engineered organs and tissues due to diffusion limits of nutrients and the lack of the necessary connection to the cardiovascular system. To pre-vascularize, endothelial cells and supporting cells can be embedded in the scaffold to foster an adequate nutrient and oxygen supply after transplantation. This technique is applied for tissue engineering of various tissues, but there have been few studies on the use of different cell types or cells sources. We compare the effect of supporting cells from different sources on vascularisation. Fibrin gels and agarose-collagen hydrogels were used as scaffolds. The supporting cells were primary human dermal fibroblasts (HDFs), human nasal fibroblasts (HNFs), human mesenchymal stem cells from umbilical cord's Wharton's jelly (WJ MSCs), adipose-derived MSCs (AD MSCs) and femoral bone marrow-derived MSCs (BM MSCs). The tissue constructs were incubated for 14 days and analyzed by two-photon laser scanning microscopy. Vascularisation was supported by all cell types, forming branched networks of tubular vascular structures in both hydrogels. In general, fibrin gels present a higher angiogenic promoting environment compared to agarose-collagen hydrogels and fibroblasts show a high angiogenic potential in co-culture with endothelial cells. In agarose-collagen hydrogels, vascular structures supported by AD MSCs were comparable to our HDF control in terms of volume, area and length. BM MSCs formed a homogeneous network of smaller structures in both hydrogels. This study provides data toward understanding the pre-vascularisation properties of different supporting cell types and sources for tissue engineering of different organs and tissues.

Combination of vascularization and cilia formation for three-dimensional airway tissue engineering.

Tissue engineering is a promising approach to treat massive airway dysfunctions such as tracheomalacia or tumors. Currently, there is no adequate solution for patients requiring the resection of more than half of the length of their trachea. In this study, the best conditions for combination of three different cell types from the respiratory airway system were investigated to develop a functional ciliated and pre-vascularized mucosal substitute in vitro. Primary human fibroblasts were combined with respiratory epithelial cells and endothelial cells. As scaffolds, fibrin gel and agarose-type I collagen blends were used and cultured with different medium compositions to optimize both vascularization and differentiation of the respiratory epithelium. A mixture of endothelial growth medium and epithelial differentiation medium was shown to optimize both vascularization and epithelial growth and differentiation. After 28 days of co-culture, significantly increased formation of capillary-like structures was observed in fibrin gels with more than three times higher structure volumes compared to agarose-collagen gels. After 35 days, epithelial differentiation into a pseudostratified epithelium with typical marker expression was improved on fibrin gels. While cilia formation was shown on both scaffolds, a higher number of ciliated cells and longer cilia were observed on fibrin gels. The data elucidate the important interplay of co-culture parameters and their impact on vascularization as well as epithelium development and provide a basis for development of functional three-dimensional airway constructs.

Influence of nanoporous titanium niobium alloy surfaces produced via hydrogen peroxide oxidative etching on the osteogenic differentiation of human mesenchymal stromal cells.

Titanium niobium alloys exhibit a lower stiffness compared to Ti6Al4V, the 'gold standard' for load-bearing bone implants. Thus, the critical mismatch in stiffness between the implant and adjacent bone tissue could be addressed with TiNb alloys and thereby reduce stress shielding, which can result in bone resorption and subsequent implant loosening; however, the cellular response on the specific material is crucial for sufficient osseointegration. We therefore hypothesize that the response of human mesenchymal stromal cells (hMSC) and osteoblast-like cells on Ti45Nb surfaces can be improved by a novel nanoporous surface structure. For this purpose, an etching technique using hydrogen peroxide electrolyte solution was applied to Ti45Nb. The treated surfaces were characterized using SEM, LSM, AFM, nanoindentation, and contact angle measurements. Cell culture experiments using hMCS and MG-63 were conducted. The H2O2 treatment resulted in surface nanopores, an increase in surface wettability and a reduction in surface hardness. The proliferation of MG-63 was enhanced on TiNb45 compared to Ti6Al4V. MG-63 focal adhesion complexes were detected on all Ti45Nb surfaces, whereas the nanostructures notably increased the cell area and decreased cell solidity, indicating stimulated cell spreading and pseudopodia formation. Alizarin red stainings indicated that the nanoporous surfaces stimulated the osteogenic differentiation of hMSC. It can be concluded that the proposed surface treatment could potentially help to stimulate the osseointegration behaviour of the advantageous low stiff Ti45Nb alloy.

Calcium phosphate scaffolds with defined interconnecting channel structure provide a mimetic 3D niche for bone marrow metastasized tumor cell growth.

Metastasis of tumor cells in the bone marrow (BM) is a multi-step and highly dynamic process during which cells succumb important phenotypic changes. Behavior of disseminated tumor cells in BM is strictly regulated by three-dimensional (3D) cell-cell and cell-matrix interactions. In this study, we explored whether the ß-tricalcium-phosphate (ß-TCP) scaffolds with a tailored interconnecting channel structure could enable appropriate 3D mimetic BM microenvironment for the growth of metastatic neuroblastoma cells. The scaffolds provided the mechanical support for human mesenchymal stromal cells (hMSC) allowing them to proliferate, differentiate towards osteoblasts, and produce the deposits of extracellular matrix inside the interconnected channels. The in vitro microenvironment shaped by stromal cells was then tailored by neuroblastoma tumor cells. Immunohistological analyses confirmed the organization of tumor cells into the forms of spheres only when co-cultured with hMSC-derived osteoblasts. The growing rate of tumor cells in 3D conditions was less marked comparing to the one of the cells grown as 2D monolayer as confirmed by decreased Ki-67 expression. Instead, the 3D culturing of neuroblastoma cells inside supportive stroma promoted cell quiescence as sustained by increased p27 level. A balance between cell proliferation, survival, and differentiation was more evident for tumor cells grown inside the 3D scaffolds, thus mirroring better the situation that occurs in vivo where the cells do not follow the exponential growth rate. We conclude that the proposed 3D ß-TCP scaffold type provides a mimetic 3D in vitro niche suitable for studying behavior of BM metastasized tumor cells. STATEMENT OF SIGNIFICANCE: Bone marrow (BM) niche is a favorite target of metastatic neuroblastoma cells. To better address the molecular mechanisms that sustain spatiotemporal organization of neuroblastoma cells in the marrow we mimicked the three-dimensional (3D) assembly of stromal and tumor cells inside ß-tricalcium-phosphate (ß-TCP) scaffolds. ß-TCP scaffolds with a tailored interconnecting channel structure provided mechanical support to mesenchymal stromal cells allowing them to differentiate towards osteoblasts and to produce extracellular matrix. A dynamic cell-matrix interplay favored the characteristic rosette-like growth of metastatic neuroblastoma cells and triggered their quiescence. With our study, we confirmed the potential of ß-TCP scaffolds with reproduced BM niche as a cost-effective in vitro model for the growth of disseminated tumor cells, and for related biological and pharmacological surveys.

Exploring Cancer Cell Behavior In Vitro in Three-Dimensional Multicellular Bioprintable Collagen-Based Hydrogels.

In vitro cancer 3D models are valuable tools to provide mechanistic insight into solid tumor growth, invasion, and drug delivery. The 3D spheroid model of solid tumors has been the most popular cancer model in use until now. However, previous studies have shown that these spheroid models lack sufficient morphological parameters, which may affect their response to chemicals. In this work, we proposed the fabrication of miniaturized 3D cancer models using collagen type I-based bioprintable bioinks. In the context of a mimicking model for advanced neuroblastoma studies, we showed that cancer cells contained in bioprintable bioinks formed Homer Wright-like rosettes, maintained their proliferative capacities and produced an equivalent Vimentin-rich matrix unlike that of non-bioprintable bioinks which made for poorer models. In addition, bioprintable bioinks were successfully bioprinted as compartmentalized 3D models in the centimeter scale, which was not feasible using non-bioprintable bioinks. In contrast to non-bioprintable hydrogels, we did not observe contraction in their bioprintable counterparts, which is an advantage for prospective 3D bioprinted models that should attain stable rheological and mechanical properties after bioprinting. By adopting this proposed system for the use of patient-derived primary tumor cells, the approach could be introduced as a first line strategy in precision medicine for testing the response of neuroblastoma cells to drugs, especially when disease progresses rapidly or patients do not respond to actual therapy regimens.

The Effect of Addition of Calcium Phosphate Particles to Hydrogel-Based Composite Materials on Stiffness and Differentiation of Mesenchymal Stromal Cells toward Osteogenesis.

The stiffness of a hydrogel has a significant role on the mechanical stability of a scaffold. However, the stiffness of pure hydrogels can be tuned only within a limited range. Herein, it is hypothesized that the range of hydrogel stiffness can be greatly increased by the addition of calcium phosphate particles and that such composites promote the osteogenic differentiation of human mesenchymal stem cells (hMSCs). Beta-tricalcium phosphate (ß-TCP) particles are incorporated at concentrations of 0.5 and 5 mg mL-1 into various agarose and agarose-collagen blends. These composites are characterized with respect to stiffness, viscosity, degradation, cell morphology, viability, and osteogenesis. The osteogenic hMSCs in less stiff composites with 0.5 mg mL-1 ß-TCP show the highest alkaline phosphatase expression compared to blends without ß-TCP and stiffer composites with 5 mg mL-1 ß-TCP. Quantitative polymerase chain reaction also shows higher expression of ALP, RUNX2, and collagen I by hMSCs in less stiff composites with 0.5 mg mL-1 ß-TCP compared to blends without ß-TCP and stiffer composite blends. It is concluded that by addition of calcium phosphate to specific hydrogels the stiffness can be tuned in a desired range and thus the osteogenic differentiation of embedded hMSCs can be better controlled and adjusted compared to pure hydrogels.