Evaluating the Arteriotomy Size of a New Sutureless Coronary Anastomosis Using a Finite Volume Approach.

OBJECTIVES: The ELANA® Heart Bypass creates a standardized sutureless anastomosis. Hereby, we investigate the influence of arteriotomy and graft size on coronary hemodynamics. METHODS: A computational fluid dynamics (CFD) model was developed. Arteriotomy size (standard 1.43 mm2; varied 0.94 - 3.6 mm2) and graft diameter (standard 2.5 mm; varied 1.5 - 5.0 mm) were independent parameters. Outcome parameters were coronary pressure and flow, and fractional flow reserve (FFR). RESULTS: The current size ELANA (arteriotomy 1.43 mm2) presented an estimated FFR 0.65 (39 mL/min). Enlarging arteriotomy increased FFR, coronary pressure, and flow. All reached a maximum once the arteriotomy (2.80 mm2) surpassed the coronary cross-sectional area (2.69 mm2, i.e. 1.85 mm diameter), presenting an estimated FFR 0.75 (46 mL/min). Increasing graft diameter was positively related to FFR, coronary pressure, and flow. CONCLUSION: The ratio between the required minimal coronary diameter for application and the ELANA arteriotomy size effectuates a pressure drop that could be clinically relevant. Additional research and eventual lengthening of the anastomosis is advised.

Variation in haplotypes in single cysts of assemblages C and D, but not of assemblage E of Giardia duodenalis.

BACKGROUND: Giardia duodenalis, a single-celled intestinal parasite, is divided into eight assemblages (A-H), with differences in host specificity. Giardia duodenalis reproduces asexually and cycles between the binucleated trophozoite (4 N) and the infectious cyst with four nuclei (16 N). Interaction between the nuclei is limited. Therefore, genetic drift causes differences in genetic make-up between the non-daughter nuclei; the allelic sequence heterozygosity (ASH). The ASH is low (0.01%-0.0023%) for the related assemblages A and E, higher (0.43-0.53) for assemblage B and much higher (0.74% -0.89%) for the assemblage C and D at the root of the phylogenetic tree. The heterozygosity in assemblage F, in the same clade as assemblage A and E, was unknown. The heterozygosity in the sequences of the gdh and dis3 genes was used as proxy for the ASH and whole genome amplification of single cysts followed by cloning and Sanger sequencing of dis3 fragment could reveal the genetic variation within the cyst. The aim of the study was to determine the level of heterozygosity within pooled and single cysts of different assemblages. RESULTS: The heterozygosity in gdh and dis3 was determined in pooled cysts of the assemblages A to F. Heterozygosity in the isolates of the assemblages C (n = 2) and D (n = 1) ranged from 0.41% to 0.82% for gdh and dis3 and no heterozygosity was found in the isolates of the assemblages A (n = 4), E (n = 3) and F (n = 3). The heterozygosity in assemblage B (n = 7) was intermediate (0% to 0.62%). Next, the number of haplotypes of dis3 was determined for single cysts of assemblages C, D and E. In the assemblages C and D, two to four haplotypes were found per cyst, while in assemblage E only one haplotype was identified. CONCLUSIONS: Having high heterozygosity is characteristic for the assemblages C and D, while having a low heterozygosity is characteristic for the clade with the assemblages A, E and F. Presence of more than 1 haplotype per cyst in assemblage C and D suggests differences between the non-daughter nuclei, in contrast to the one haplotype in assemblage E.

Giardia duodenalis multi-locus genotypes in dogs with different levels of synanthropism and clinical signs.

BACKGROUND: In dogs, infections with Giardia duodenalis are mainly caused by assemblages C and D, but also by the potentially zoonotic assemblages A and B. The aims of this study were to assess differences in assemblages (i) between dogs living mainly in close proximity to humans (synanthropic dogs) versus dogs living mainly among other dogs, (ii) between samples of dogs with or without loose stool, and (iii) related to the amount of cysts shedding. METHODS: One hundred eighty-nine qPCR Giardia positive fecal samples of dogs originating from four groups (household, sheltered, hunting, and dogs for which a veterinarian sent a fecal sample to a diagnostic laboratory) were used for genotyping. For this, multi-locus genotyping of beta-giardin, triose phosphate isomerase, and glutamate dehydrogenase and genotyping of SSU rDNA gene fragments were performed. Fecal consistency was scored (loose or non-loose stool), and cysts per gram of feces were determined with qPCR. RESULTS: Assemblage D was the most prevalent in all groups, followed by the other canid assemblage C. Also, mixed C/D was common. In two (synanthropic) household dogs, the potentially zoonotic assemblage AI was present. Although occurrence of assemblage AI in household dogs was not significantly different from dogs living among other dogs (sheltered and hunting dogs), it was significantly higher compared to dogs for which a sample was sent to a diagnostic laboratory. Dogs with assemblage D shed significantly more cysts than dogs with other assemblages (except for mixed C/D results) or dogs in which no assemblage could be determined. None of the assemblages was significantly associated with loose stool. CONCLUSION: Not only do dogs mainly shed the canid Giardia duodenalis assemblages D and/or C, the numbers of cysts per gram for the canid assemblage D were also higher than for the potential zoonotic assemblage AI. Based on the assemblages shed by dogs, the risk to public health posed by dogs is estimated to be low, even though the dogs that shed AI were synanthropic household dogs. Loose stool in infected dogs was not associated with any particular Giardia assemblage.

Reproducibility assessment of ultrasound-based aortic stiffness quantification and verification using Bi-axial tensile testing.

Current guidelines for abdominal aortic aneurysm (AAA) repair are primarily based on the maximum diameter. Since these methods lack robustness in decision making, new image-based methods for mechanical characterization have been proposed. Recently, time-resolved 3D ultrasound (4D US) in combination with finite element analysis was shown to provide additional risk estimators such as patient-specific peak wall stresses and wall stiffness in a non-invasive way. The aim of this study is to: 1) assess the reproducibility of this US-based stiffness measurement in vitro and in vivo, and 2) verify this 4D US stiffness using the gold standard: bi-axial tensile testing of the excised aortic tissue. For the in vitro study, 4D US data were acquired in an idealized inflation experiment using porcine aortas. The full aortic geometry was segmented and tracked over the cardiac cycle, and afterwards finite element analysis was performed by calibrating the finite element model to the measured US displacements to find the global aortic wall stiffness. For verification purposes, the porcine tissue was subjected to bi-axial tensile testing. Secondly, four AAA patients were included and 4D US data were acquired before open aortic surgery was performed. Similar to the experimental approach, the 4D US data were analyzed using the iterative finite element approach. During surgery, aortic tissue was harvested and the resulting tissue specimens were analyzed using bi-axial tensile testing. Finally, reproducibility was quantified for both methods. A high reproducibility was observed for the wall stiffness measurements using 4D US, i.e., an ICC of 0.91 (95% CI: 0.78-0.98) for the porcine aortas and an ICC of 0.98 (95% CI: 0.84-1.00) for the AAA samples. Verification with bi-axial tensile testing revealed a good agreement for the inflation experiment and a moderate agreement for the AAA patients, partially caused by the diseased state and inhomogeneities of the tissue. The performance of aortic stiffness characterization using 4D US revealed overall a high reproducibility and a moderate agreement with ex vivo mechanical testing. Future research should include more patient samples, to statistically assess the accuracy of the current in vivo method, which is not trivial due to the low number of open surgical interventions.

Ultrasound Based Wall Stress Analysis of Abdominal Aortic Aneurysms using Multiperspective Imaging.

BACKGROUND: Current clinical guidelines for surgical repair of abdominal aortic aneurysms (AAAs) are primarily based on maximum diameter assessment. From a biomechanical point of view, not only the diameter but also peak wall stresses will play an important role in rupture risk assessment. These methods require patient specific geometry which typically uses computed tomography (CT) or magnetic resonance imaging. Recently, wall stress analysis based on 3D ultrasound (US) has been proposed, and shows promising results. However, the major limitations in these studies were the use of manual segmentation and the limiting field of view of US. Therefore in this study, the AAA is imaged with multiperspective 3D ultrasound, merged to obtain a large field of view, and afterwards automatically segmented. Geometry and wall stress results were validated using CT imaging. METHODS: Three dimensional US and CT data were available for 40 AAA patients (maximum diameter 34-61 mm). The full US based AAA geometry was determined using automatic segmentation, and when the aneurysm exceeded a single 3D volume, automatic fusion of multiple 3D US volumes was used. Wall stress analysis was performed for all AAA patients and percentile wall stresses were derived. The accuracy of the US based geometry and wall stress prediction was measured by comparison with CT data. RESULTS: Estimated geometries derived from 3D US and CT data showed good similarity, with an overall median similarity index (SI) of 0.89 and interquartile range of 0.87-0.92, whereas the median Hausdorff distances (HD), a measure for the maximum local mismatch, was 4.6 (4.0-5.9) mm for all AAA geometries. Thereby, the wall stress results based on merged multiperspective 3D US data revealed a greater similarity to CT than single 3D US data. CONCLUSION: This study showed that large volume geometry assessment of AAAs using multiperspective 3D ultrasound, segmentation and fusion, and wall stress analysis is feasible in a robust and labour efficient manner.

Whole-genome sequencing of dog-specific assemblages C and D of Giardia duodenalis from single and pooled cysts indicates host-associated genes.

Giardia duodenalis (syn. Giardia intestinalis or Giardia lamblia) infSAects over 280 million people each year and numerous animals. G. duodenalis can be subdivided into eight assemblages with different host specificity. Unculturable assemblages have so far resisted genome sequencing efforts. In this study, we isolated single and pooled cysts of assemblages C and D from dog faeces by FACS, and sequenced them using multiple displacement amplification and Illumina paired-end sequencing. The genomes of assemblages C and D were compared with genomes of assemblages A and B from humans and assemblage E from ruminants and pigs. The genomes obtained from the pooled cysts and from the single cysts were considered complete (>99 % marker genes observed) and the allelic sequence heterozygosity (ASH) values of assemblages C and D were 0.89 and 0.74 %, respectively. These ASH values were slightly higher than for assemblage B (>0.43 %) and much higher than for assemblages A and E, which ranged from 0.002 to 0.037 %. The flavohaemoglobin and 4Fe-4S binding domain family encoding genes involved in O2 and NO detoxification were only present in assemblages A, B and E. Cathepsin B orthologs were found in all genomes. Six clades of cathepsin B orthologs contained one gene of each genome, while in three clades not all assemblages were represented. We conclude that whole-genome sequencing from a single Giardia cyst results in complete draft genomes, making the genomes of unculturable Giardia assemblages accessible. Observed differences between the genomes of assemblages C and D on one hand and the assemblages A, B and E on the other hand are possibly associated with host specificity.

Host factors associated with Giardia duodenalis infection in dogs across multiple diagnostic tests.

BACKGROUND: The aim of this study was to assess potential associations between Giardia duodenalis infection in dogs, as determined by three diagnostic tests, and dog's group of origin, fecal consistency, age, sex, neuter status, and co-infections with other gastrointestinal parasites. METHODS: Fecal samples from 1291 dogs from four groups (household, shelter, hunting and clinical dogs) were tested with qPCR, rapid enzyme immunochromatographic assay (IDEXX SNAP® Giardia), and direct immunofluorescence (DFA, Merifluor) for presence of G. duodenalis. Moreover, fecal samples were tested with centrifugation sedimentation flotation (CSF) coproscopical analysis for presence of gastrointestinal parasites. Associations were expressed as odds ratios (ORs). RESULTS: Several significant associations were found, of which a few were consistent for all three tests and Giardia positivity in general (positive with at least one of these tests). Dogs older than one year were significantly less likely to test positive for Giardia than younger dogs. Group-housed dogs, especially hunting dogs, were significantly more likely to test positive for Giardia compared to household and clinical dogs. A consistently significant association with Trichuris appeared to be driven by the high prevalence in hunting dogs. Although there was no significant association between loose stool and Giardia infection in the overall population, household dogs were significantly more likely to test Giardia-positive when having loose stool. Overall, Giardia-positive dogs with loose stool shed significantly more cysts, both determined semi-quantitatively with CSF and quantitatively by qPCR, than positive dogs with no loose stool. When other gastrointestinal parasites were present, significantly fewer cysts were detected with CSF, but this was not confirmed with qPCR. CONCLUSION: Giardia is the most common gastrointestinal parasite in Dutch dogs, except for hunting dogs, in which Trichuris and strongyle-type eggs (hookworms) prevailed. Giardia infection was not significantly associated with loose stool, except for household dogs. Young dogs and group-housed dogs were significantly more often Giardia-positive. These associations were consistent across diagnostic tests. Young dogs, clinical dogs and dogs with loose stool shed Giardia cysts in the highest numbers. If another gastrointestinal parasite was present lower numbers of cysts were observed by microscope (CSF), but not with a molecular method (qPCR).

Comparing four diagnostic tests for Giardia duodenalis in dogs using latent class analysis.

BACKGROUND: To accurately diagnose giardiosis in dogs, knowledge of diagnostic test characteristics and expected prevalence are required. The aim of this work was to estimate test characteristics (sensitivity and specificity) of four commonly used diagnostic tests for detection of Giardia duodenalis in dogs. METHODS: Fecal samples from 573 dogs originating from four populations (household dogs, shelter dogs, hunting dogs and clinical dogs) were examined with centrifugation sedimentation flotation (CSF) coproscopical analysis, direct immunofluorescence assay (DFA, Merifluor Cryptosporidium/Giardia®), a rapid enzyme immunochromatographic assay (IDEXX SNAP Giardia®) and qPCR (SSU rDNA) for presence of G. duodenalis. Bayesian latent class analysis was used to determine test performance characteristics and to estimate G. duodenalis prevalence of each of the four dog populations. RESULTS: All tests were highly specific. IDEXX SNAP Giardia® showed the highest specificity (99.6%) and qPCR the lowest (85.6%). The sensitivities were much more variable, with qPCR showing the highest (97.0%) and CSF the lowest (48.2%) sensitivity. DFA was more sensitive than IDEXX SNAP Giardia®, but slightly less specific. Prevalences of G. duodenalis differed substantially between populations, with the hunting dogs showing the highest G. duodenalis prevalence (64.9%) and the household dogs the lowest (7.9%). CONCLUSIONS: This study identifies qPCR as a valuable screening tool because of its high sensitivity, whereas methods using microscopy for cyst identification or cyst wall detection should be used in situations where high specificity is required. G. duodenalis is a prevalent gastro-intestinal parasite in Dutch dogs, especially in dogs living in groups (hunting and shelter dogs) and clinical dogs.

Hemodynamic significance assessment of equivocal iliac artery stenoses by comparing duplex ultrasonography with intra-arterial pressure measurements.

BACKGROUND: This study evaluated the accuracy of duplex ultrasonography (DUS)-based peak systolic velocity ratio (PSVR) and ipsilateral common femoral artery (CFA) velocity waveform analysis to identify a hemodynamically significant equivocal iliac artery stenosis (30-75% lumen diameter reduction). Intra-arterial pressure measurements were used as a reference. METHODS: In a previously performed prospective study (NTR5085), 30 patients with 35 iliac artery stenoses underwent intra-arterial angiography. To determine the hemodynamic significance of the iliac artery stenoses, intra-arterial translesional pressure measurements were performed under hyperemic conditions. Preprocedural DUS was obtained of the iliac and femoral arteries. PSVR over the iliac lesions was determined, and ipsilateral CFA velocity waveforms were retrospectively classified. The intraobserver and interobserver agreement for CFA velocity waveform classification were evaluated. Sensitivity, specificity, and overall accuracy were calculated by comparing PSVR, velocity waveform analysis, and a combination of these parameters to the intra-arterial translesional pressure gradient. A translesional pressure gradient ≥10 mmHg, PSVR ≥2.5, and a monophasic or biphasic CFA velocity waveform were considered to be indicative for a hemodynamically significant iliac artery stenosis. RESULTS: For classification of ipsilateral CFA velocity waveforms, intraobserver and interobserver agreement were 0.94 and 0.82, respectively. A PSVR ≥2.5 could identify a hemodynamically significant stenosis with 83% sensitivity, 67% specificity, and an overall accuracy of 77%. When both a monophasic and a biphasic velocity waveform were considered to indicate a hemodynamically significant iliac artery stenosis, sensitivity was 78%, specificity was 50%, and the overall accuracy was 69%. The combination of a PSVR ≥2.5 with either a monophasic or a biphasic CFA velocity waveform was found in 20 stenoses and resulted in 94% sensitivity, 75% specificity, and 90% accuracy. When the remainder of the stenoses (N.=15) was classified by means of the PSVR, the overall accuracy remained 77%. CONCLUSIONS: DUS is a very useful noninvasive imaging modality to determine the significance of an iliac artery stenosis. A combination of translesional PSVR ≥2.5 with either a monophasic or a biphasic ipsilateral CFA ultrasound waveforms has a good accuracy and helps to select patients that benefit most from follow-up examination by computed tomography angiography or magnetic resonance angiography.

Feasibility of wall stress analysis of abdominal aortic aneurysms using three-dimensional ultrasound.

OBJECTIVE: Abdominal aortic aneurysms (AAAs) are local dilations that can lead to a fatal hemorrhage when ruptured. Wall stress analysis of AAAs is a novel tool that has proven high potential to improve risk stratification. Currently, wall stress analysis of AAAs is based on computed tomography (CT) and magnetic resonance imaging; however, three-dimensional (3D) ultrasound (US) has great advantages over CT and magnetic resonance imaging in terms of costs, speed, and lack of radiation. In this study, the feasibility of 3D US as input for wall stress analysis is investigated. Second, 3D US-based wall stress analysis was compared with CT-based results. METHODS: The 3D US and CT data were acquired in 12 patients (diameter, 35-90 mm). US data were segmented manually and compared with automatically acquired CT geometries by calculating the similarity index and Hausdorff distance. Wall stresses were simulated at P = 140 mm Hg and compared between both modalities. RESULTS: The similarity index of US vs CT was 0.75 to 0.91 (n = 12), with a median Hausdorff distance ranging from 4.8 to 13.9 mm, with the higher values found at the proximal and distal sides of the AAA. Wall stresses were in accordance with literature, and a good agreement was found between US- and CT-based median stresses and interquartile stresses, which was confirmed by Bland-Altman and regression analysis (n = 8). Wall stresses based on US were typically higher (+23%), caused by geometric irregularities due to the registration of several 3D volumes and manual segmentation. In future work, an automated US registration and segmentation approach is the essential point of improvement before pursuing large-scale patient studies. CONCLUSIONS: This study is a first step toward US-based wall stress analysis, which would be the modality of choice to monitor wall stress development over time because no ionizing radiation and contrast material are involved.

A novel experimental approach for three-dimensional geometry assessment of calcified human stenotic arteries in vitro.

To improve diagnosis and understanding of the risk of rupture of atherosclerotic plaque, new strategies to realistically determine mechanical properties of atherosclerotic plaque need to be developed. In this study, an in vitro experimental method is proposed for accurate 3-D assessment of (diseased) vessel geometry using ultrasound. The method was applied to a vascular phantom, a healthy porcine carotid artery and human carotid endarterectomy specimens (n = 6). Vessel segments were pressure fixed and rotated in 10 ° steps. Longitudinal cross sections were imaged over 360 °. Findings were validated using micro-computed tomography (µCT). Results show good agreement between ultrasound and µCT-based geometries of the different segment types (ISI phantom = 0.94, ISI healthy = 0.79, ISI diseased = 0.75-0.80). The method does not suffer from acoustic shadowing effects present when imaging stenotic segments and allows future dynamic measurements to determine mechanical properties of atherosclerotic plaque in an in vitro setting.

Validation of a patient-specific hemodynamic computational model for surgical planning of vascular access in hemodialysis patients.

Vascular access dysfunction is one of the main causes of morbidity and hospitalization in hemodialysis patients. This major clinical problem points out the need for prediction of hemodynamic changes induced by vascular access surgery. Here we reviewed the potential of a patient-specific computational vascular network model that includes vessel wall remodeling to predict blood flow change within 6 weeks after surgery for different arteriovenous fistula configurations. For model validation, we performed a multicenter, prospective clinical study to collect longitudinal data on arm vasculature before and after surgery. Sixty-three patients with newly created arteriovenous fistula were included in the validation data set and divided into four groups based on fistula configuration. Predicted brachial artery blood flow volumes 40 days after surgery had a significantly high correlation with measured values. Deviation of predicted from measured brachial artery blood flow averaged 3% with a root mean squared error of 19.5%, showing that the computational tool reliably predicted patient-specific blood flow increase resulting from vascular access surgery and subsequent vascular adaptation. This innovative approach may help the surgeon to plan the most appropriate fistula configuration to optimize access blood flow for hemodialysis, potentially reducing the incidence of vascular access dysfunctions and the need of patient hospitalization.

The benefit of non contrast-enhanced magnetic resonance angiography for predicting vascular access surgery outcome: a computer model perspective.

INTRODUCTION: Vascular access (VA) surgery, a prerequisite for hemodialysis treatment of end-stage renal-disease (ESRD) patients, is hampered by complication rates, which are frequently related to flow enhancement. To assist in VA surgery planning, a patient-specific computer model for postoperative flow enhancement was developed. The purpose of this study is to assess the benefit of non contrast-enhanced magnetic resonance angiography (NCE-MRA) data as patient-specific geometrical input for the model-based prediction of surgery outcome. METHODS: 25 ESRD patients were included in this study. All patients received a NCE-MRA examination of the upper extremity blood vessels in addition to routine ultrasound (US). Local arterial radii were assessed from NCE-MRA and converted to model input using a linear fit per artery. Venous radii were determined with US. The effect of radius measurement uncertainty on model predictions was accounted for by performing Monte-Carlo simulations. The resulting flow prediction interval of the computer model was compared with the postoperative flow obtained from US. Patients with no overlap between model-based prediction and postoperative measurement were further analyzed to determine whether an increase in geometrical detail improved computer model prediction. RESULTS: Overlap between postoperative flows and model-based predictions was obtained for 71% of patients. Detailed inspection of non-overlapping cases revealed that the geometrical details that could be assessed from NCE-MRA explained most of the differences, and moreover, upon addition of these details in the computer model the flow predictions improved. CONCLUSIONS: The results demonstrate clearly that NCE-MRA does provide valuable geometrical information for VA surgery planning. Therefore, it is recommended to use this modality, at least for patients at risk for local or global narrowing of the blood vessels as well as for patients for whom an US-based model prediction would not overlap with surgical choice, as the geometrical details are crucial for obtaining accurate flow predictions.

Patient-specific computational modeling of upper extremity arteriovenous fistula creation: its feasibility to support clinical decision-making.

INTRODUCTION: Inadequate flow enhancement on the one hand, and excessive flow enhancement on the other hand, remain frequent complications of arteriovenous fistula (AVF) creation, and hamper hemodialysis therapy in patients with end-stage renal disease. In an effort to reduce these, a patient-specific computational model, capable of predicting postoperative flow, has been developed. The purpose of this study was to determine the accuracy of the patient-specific model and to investigate its feasibility to support decision-making in AVF surgery. METHODS: Patient-specific pulse wave propagation models were created for 25 patients awaiting AVF creation. Model input parameters were obtained from clinical measurements and literature. For every patient, a radiocephalic AVF, a brachiocephalic AVF, and a brachiobasilic AVF configuration were simulated and analyzed for their postoperative flow. The most distal configuration with a predicted flow between 400 and 1500 ml/min was considered the preferred location for AVF surgery. The suggestion of the model was compared to the choice of an experienced vascular surgeon. Furthermore, predicted flows were compared to measured postoperative flows. RESULTS: Taken into account the confidence interval (25(th) and 75(th) percentile interval), overlap between predicted and measured postoperative flows was observed in 70% of the patients. Differentiation between upper and lower arm configuration was similar in 76% of the patients, whereas discrimination between two upper arm AVF configurations was more difficult. In 3 patients the surgeon created an upper arm AVF, while model based predictions allowed for lower arm AVF creation, thereby preserving proximal vessels. In one patient early thrombosis in a radiocephalic AVF was observed which might have been indicated by the low predicted postoperative flow. CONCLUSIONS: Postoperative flow can be predicted relatively accurately for multiple AVF configurations by using computational modeling. This model may therefore be considered a valuable additional tool in the preoperative work-up of patients awaiting AVF creation.

In vitro comparison of support capabilities of intra-aortic balloon pump and Impella 2.5 left percutaneous.

The Impella 2.5 left percutaneous (LP), a relatively new transvalvular assist device, challenges the position of the intra-aortic balloon pump (IABP), which has a long record in supporting patients after myocardial infarction and cardiac surgery. However, while more costly and more demanding in management, the advantages of the Impella 2.5 LP are yet to be established. The aim of this study was to evaluate the benefits of the 40 cc IABP and the Impella 2.5 LP operating at 47,000 rpm in vitro, and compare their circulatory support capabilities in terms of cardiac output, coronary flow, cardiac stroke work, and arterial blood pressure. Clinical scenarios of cardiogenic preshock and cardiogenic shock (CS), with blood pressure depression, lowered cardiac output, and constant heart rate of 80 bpm, were modeled in a model-controlled mock circulation, featuring a systemic, pulmonary, and coronary vascular bed. The ventricles, represented by servomotor-operated piston pumps, included the Frank-Starling mechanism. The systemic circulation was modeled with a flexible tube having close-to-human aortic dimensions and compliance properties. Proximally, it featured a branch mimicking the brachiocephalic arteries and a physiological correct coronary flow model. The rest of the systemic and pulmonary impedance was modeled by four-element Windkessel models. In this system, the enhancement of coronary flow and blood pressure was tested with both support systems under healthy and pathological conditions. Hemodynamic differences between the IABP and the Impella 2.5 LP were small. In our laboratory model, both systems approximately yielded a 10% cardiac output increase and a 10% coronary flow increase. However, since the Impella 2.5 LP provided significantly better left ventricular unloading, the circulatory support capabilities were slightly in favor of the Impella 2.5 LP. On the other hand, pulsatility was enhanced with the IABP and lowered with the Impella 2.5 LP. The support capabilities of both the IABP and the Impella 2.5 LP strongly depended on the simulated hemodynamic conditions. Maximum hemodynamic benefits were achieved when mechanical circulatory support was applied on a simulated scenario of deep CS.

Small coronary calcifications are not detectable by 64-slice contrast enhanced computed tomography.

Recently, small calcifications have been associated with unstable plaques. Plaque calcifications are both in intravascular ultrasound (IVUS) and multi-slice computed tomography (MSCT) easily recognized. However, smaller calcifications might be missed on MSCT due to its lower resolution. Because it is unknown to which extent calcifications can be detected with MSCT, we compared calcification detection on contrast enhanced MSCT with IVUS. The coronary arteries of patients with myocardial infarction or unstable angina were imaged by 64-slice MSCT angiography and IVUS. The IVUS and MSCT images were registered and the arteries were inspected on the presence of calcifications on both modalities independently. We measured the length and the maximum circumferential angle of each calcification on IVUS. In 31 arteries, we found 99 calcifications on IVUS, of which only 47 were also detected on MSCT. The calcifications missed on MSCT (n = 52) were significantly smaller in angle (27° ± 16° vs. 59° ± 31°) and length (1.4 ± 0.8 vs. 3.7 ± 2.2 mm) than those detected on MSCT. Calcifications could only be detected reliably on MSCT if they were larger than 2.1 mm in length or 36° in angle. Half of the calcifications seen on the IVUS images cannot be detected on contrast enhanced 64-slice MSCT angiography images because of their size. The limited resolution of MSCT is the main reason for missing small calcifications.

The mechanical role of thrombus on the growth rate of an abdominal aortic aneurysm.

OBJECTIVES: In the decision for surgical repair of abdominal aortic aneurysms (AAAs), the maximum diameter is the main factor. Several studies have concluded that the diameter may not be reliable as rupture risk criterion for the individual patient and wall stress was found to have a higher sensitivity and specificity. The AAA wall stress may also be an influential factor in growth of the AAA. This study investigates the effect of intraluminal thrombus on the wall stress and growth rate of aneurysms, using both idealized and patient-specific AAA models in wall stress computations. METHODS: Idealized AAA models were created for wall stress analysis. Thrombus was modeled as an incompressible linear elastic material and was fixed to the wall. The reduction in wall stress for a range of thrombus volumes and shear moduli was computed. For 30 patient-specific AAA models with varying thrombus volumes, the wall stress was computed with and without thrombus. The diameter growth rate was compared for AAAs with a small and large thrombus volume. The results were compared between the idealized and patient-specific models. RESULTS: The thrombus caused a reduction in wall stress, which was stronger for larger thrombi and higher elastic moduli. Any AAAs with a large thrombus were found to have significant stronger growth in diameter than aneurysms with a small thrombus (P < .01). The stress reduction due to the thrombus showed the same trend for the idealized and patient-specific models, although the effect was overestimated by the idealized models and a considerable variation between patients was observed. CONCLUSION: A larger thrombus in AAA was associated with a higher AAA growth rate, but also with a lower wall stress. Therefore, weakening of the AAA wall, under the influence of thrombus, may play a more imminent role in the process of AAA growth than the stress acting on the wall.

Plaque and shear stress distribution in human coronary bifurcations: a multislice computed tomography study.

AIMS: Early atherosclerosis is located in low wall shear-stress (WSS) regions, however plaques are also found in the high WSS sensing flow divider walls of coronary bifurcations. We assessed the plaque distribution and morphology near bifurcations non-invasively with 64-slice computed tomography in relation to the WSS distribution. METHODS AND RESULTS: We inspected 65 cross-sections near coronary bifurcations for the presence of plaque. Cross-sections were divided into four equal parts, which we numbered according to expected levels of WSS, with part I the lowest WSS (outer wall) and increasing WSS's in part II (inner bend), III (outer bend) and IV (flow divider). Of the cross-sections 88% had plaque. Of all parts I, 72% contained plaque. This was 62%, 38% and 31% in parts II, III and IV. In cross-sections with only 1 or 2 parts inflicted, plaque was found in part I and/or II in 94%. In 93% of the cross-sections with the flow divider inflicted, parts I and/or II were also inflicted. Plaque was never found exclusively in the flow divider part IV. CONCLUSIONS: We demonstrated that plaque is mostly present in low WSS regions, whereas plaque in high WSS regions is accompanied by plaque in adjacent low WSS regions. It is therefore plausible that plaque grows from the outer wall (low WSS) of the bifurcation towards the flow divider (high WSS).

Effects of wall calcifications in patient-specific wall stress analyses of abdominal aortic aneurysms.

It is generally acknowledged that rupture of an abdominal aortic aneurysm (AAA) occurs when the stress acting on the wall over the cardiac cycle exceeds the strength of the wall. Peak wall stress computations appear to give a more accurate rupture risk assessment than AAA diameter, which is currently used for a diagnosis. Despite the numerous studies utilizing patient-specific wall stress modeling of AAAs, none investigated the effect of wall calcifications on wall stress. The objective of this study was to evaluate the influence of calcifications on patient-specific finite element stress computations. In addition, we assessed whether the effect of calcifications could be predicted directly from the CT-scans by relating the effect to the amount of calcification present in the AAA wall. For 6 AAAs, the location and extent of calcification was identified from CT-scans. A finite element model was created for each AAA and the areas of calcification were defined node-wise in the mesh of the model. Comparisons are made between maximum principal stress distributions, computed without calcifications and with calcifications with varying material properties. Peak stresses are determined from the stress results and related to a calcification index (CI), a quantification of the amount of calcification in the AAA wall. At calcification sites, local stresses increased, leading to a peak stress increase of 22% in the most severe case. Our results displayed a weak correlation between the CI and the increase in peak stress. Additionally, the results showed a marked influence of the calcification elastic modulus on computed stresses. Inclusion of calcifications in finite element analysis of AAAs resulted in a marked alteration of the stress distributions and should therefore be included in rupture risk assessment. The results also suggest that the location and shape of the calcified regions--not only the relative amount--are considerations that influence the effect on AAA wall stress. The dependency of the effect of the wall stress on the calcification elastic modulus points out the importance of determination of the material properties of calcified AAA wall.

Cleft palate: modern technology and neuroscience merge.

This is a report of a cleft palate-craniofacial team's experience with 768 patients that have had clefting over 22 years, with a primary focus on function and prevention of communication disorders associated traditionally with cleft palate. The treatment philosophy is based on tenets of child development and the dependency of neuropsychobiological development on the child's inherent competency, and early environmental stimulation and support. The applied treatments include ensuring early and adequate hearing, psychosocial adaptation of the parent and child through training for applications of indirect therapies, and early fistula-free surgical closure of the cleft that produces minimal scarring and a mobile velum. Team members have extensive backgrounds in child development that seem to have helped the majority of families in their complex efforts of daily care and sensory stimulation, and their children have developed early the ability to adapt modified structures to normal functions. Only one of these patients has needed or received secondary palatal surgery for correction of velopalatal insufficiency. Fifty-six children who did not achieve acceptable 2 to 3-year old communication criteria were referred for speech and language evaluation and therapy. These patients were reported to exhibit oral motor deficits described as developmental verbal dyspraxia.