Uncovering supramolecular chirality codes for the design of tunable biomaterials.

In neurodegenerative diseases, polymorphism and supramolecular assembly of ß-sheet amyloids are implicated in many different etiologies and may adopt either a left- or right-handed supramolecular chirality. Yet, the underlying principles of how sequence regulates supramolecular chirality remains unknown. Here, we characterize the sequence specificity of the central core of amyloid-ß 42 and design derivatives which enable chirality inversion at biologically relevant temperatures. We further find that C-terminal modifications can tune the energy barrier of a left-to-right chiral inversion. Leveraging this design principle, we demonstrate how temperature-triggered chiral inversion of peptides hosting therapeutic payloads modulates the dosed release of an anticancer drug. These results suggest a generalizable approach for fine-tuning supramolecular chirality that can be applied in developing treatments to regulate amyloid morphology in neurodegeneration as well as in other disease states.

Statistical Methods for Microrheology of Airway Mucus with Extreme Heterogeneity.

The mucus lining of the human airway epithelium contains two gel-forming mucins, MUC5B and MUC5AC. During progression of cystic fibrosis (CF), mucus hyper-concentrates as its mucin ratio changes, coinciding with formation of insoluble, dense mucus flakes. We explore rheological heterogeneity of this pathology with reconstituted mucus matching three stages of CF progression and particle-tracking of 200 nm and 1 micron diameter beads. We introduce statistical data analysis methods specific to low signal-to-noise data within flakes. Each bead time series is decomposed into: (i) a fractional Brownian motion (fBm) classifier of the pure time-series signal; (ii) high-frequency static and dynamic noise; and (iii) low-frequency deterministic drift. Subsequent analysis focuses on the denoised fBm classifier ensemble from each mucus sample and bead diameter. Every ensemble fails a homogeneity test, compelling clustering methods to assess levels of heterogeneity. The first binary level detects beads within vs. outside flakes. A second binary level detects within-flake bead signals that can vs. cannot be disentangled from the experimental noise floor. We show all denoised ensembles, within- and outside-flakes, fail a homogeneity test, compelling additional clustering; next, all clusters with sufficient data fail a homogeneity test. These levels of heterogeneity are consistent with outcomes from a stochastic phase-separation process, and dictate applying the generalized Stokes-Einstein relation to each bead per cluster per sample, then frequency-domain averaging to assess rheological heterogeneity. Flakes exhibit a spectrum of gel-like and sol-like domains, outside-flake solutions a spectrum of sol-like domains, painting a rheological signature of the phase-separation process underlying flake-burdened mucus.

Mucus and mucus flake composition and abundance reflect inflammatory and infection status in cystic fibrosis.

BACKGROUND: Mucus hyperconcentration in cystic fibrosis (CF) lung disease is marked by increases in both mucin and DNA concentration. Additionally, it has been shown that half of the mucins present in bronchial alveolar lavage fluid (BALF) from preschool-aged CF patients are present in as non-swellable mucus flakes. This motivates us to examine the utility of mucus flakes, as well as mucin and DNA concentrations in BALF as markers of infection and inflammation in CF airway disease. METHODS: In this study, we examined the mucin and DNA concentration, as well as mucus flake abundance, composition, and biophysical properties in BALF from three groups; healthy adult controls, and two CF cohorts, one preschool aged and the other school aged. BALFs were characterized via refractometry, PicoGreen, immunofluorescence microscopy, particle tracking microrheology, and fluorescence image tiling. RESULTS: Mucin and DNA BALF concentrations increased progressively from healthy young adult controls to preschool-aged people and school-aged people with CF. Notably, mucin concentrations were increased in bronchoalveolar lavage fluid (BALF) from preschool-aged patients with CF prior to decreased pulmonary function. Infrequent small mucus flakes were identified in normal subjects. A progressive increase in the abundance of mucus flakes in preschool and school-aged CF patients was observed. Compositionally, MUC5B dominated flakes from normal subjects, whereas an increase in MUC5AC was observed in people with CF, reflected in a reduced flaked MUC5B/MUC5AC mucin ratio. CONCLUSION: These findings suggest mucus composition and flake properties are useful markers of inflammatory and infection-based changes in CF airways.

Mucus concentration-dependent biophysical abnormalities unify submucosal gland and superficial airway dysfunction in cystic fibrosis.

Cystic fibrosis (CF) is characterized by abnormal transepithelial ion transport. However, a description of CF lung disease pathophysiology unifying superficial epithelial and submucosal gland (SMG) dysfunctions has remained elusive. We hypothesized that biophysical abnormalities associated with CF mucus hyperconcentration provide a unifying mechanism. Studies of the anion secretion-inhibited pig airway model of CF revealed elevated SMG mucus concentrations, osmotic pressures, and SMG mucus accumulation. Human airway studies revealed hyperconcentrated CF SMG mucus with raised osmotic pressures and cohesive forces predicted to limit SMG mucus secretion/release. Using proline-rich protein 4 (PRR4) as a biomarker of SMG secretion, CF sputum proteomics analyses revealed markedly lower PRR4 levels compared to healthy and bronchiectasis controls, consistent with a failure of CF SMGs to secrete mucus onto airway surfaces. Raised mucus osmotic/cohesive forces, reflecting mucus hyperconcentration, provide a unifying mechanism that describes disease-initiating mucus accumulation on airway surfaces and in SMGs of the CF lung.

Hydrogen Bonding Stiffens Peptide Amphiphile Supramolecular Filaments by Aza-Glycine Residues.

Peptide amphiphiles (PAs) are a class of molecules comprised of short amino acid sequences conjugated to hydrophobic moieties that may exhibit self-assembly in water into supramolecular structures. We investigate here how mechanical properties of hydrogels formed by PA supramolecular nanofibers are affected by hydrogen bond densities within their internal structure by substituting glycine for aza-glycine (azaG) residues. We found that increasing the number of PA molecules that contain azaG up to 5 mol% in PA supramolecular nanofibers increases their persistence length fivefold and decreases their diffusion coefficients as measured by fluorescence recovery after photobleaching. When these PAs are used to create hydrogels, their bulk storage modulus (G') was found to increase as azaG PA content in the supramolecular assemblies increases up to a value of 10 mol% and beyond this value a decrease was observed, likely due to diminished levels of nanofiber entanglement in the hydrogels as a direct result of increased supramolecular rigidity. Interestingly, we found that the bioactivity of the scaffolds toward dopaminergic neurons derived from induced pluripotent stem cells can be enhanced directly by persistence length independently of storage modulus. We hypothesize that this is due to interactions between the cells and the extracellular environment across different size scales: from filopodia adhering to individual nanofiber bundles to cell adhesion sites that interact with the hydrogel as a bulk substrate. Fine tuning of hydrogen bond density in self-assembling peptide biomaterials such as PAs provides an approach to control nanoscale stiffness as part of an overall strategy to optimize bioactivity in these supramolecular systems. supramolecular biomaterials. STATEMENT OF SIGNIFICANCE: Hydrogen bonding is an important driving force for the self-assembly of peptides in both biological and artificial systems. Here, we increase the amount of hydrogen bonding within self-assembled peptide amphiphile (PA) nanofibers by substituting glycine for an aza-glycine (azaG). We show that increasing the molar concentration of azaG increases the internal order of individual nanofibers and increases their persistence length. We also show that these changes are sufficient to increase survival and tyrosine hydroxylase expression in induced pluripotent stem cell-derived dopaminergic neurons cultured in 3D gels made of these materials. Our strategy of tuning the number of hydrogen bonds in a supramolecular assembly provides mechanical customization for 3D cell culture and tissue engineering.

Catching COVID: Engineering Peptide-Modified Surface-Enhanced Raman Spectroscopy Sensors for SARS-CoV-2.

COVID-19 remains an ongoing issue across the globe, highlighting the need for a rapid, selective, and accurate sensor for SARS-CoV-2 and its emerging variants. The chemical specificity and signal amplification of surface-enhanced Raman spectroscopy (SERS) could be advantageous for developing a quantitative assay for SARS-CoV-2 with improved speed and accuracy over current testing methods. Here, we have tackled the challenges associated with SERS detection of viruses. As viruses are large, multicomponent species, they can yield different SERS signals, but also other abundant biomolecules present in the sample can generate undesired signals. To improve selectivity in complex biological environments, we have employed peptides as capture probes for viral proteins and developed an angiotensin-converting enzyme 2 (ACE2) mimetic peptide-based SERS sensor for SARS-CoV-2. The unique vibrational signature of the spike protein bound to the peptide-modified surface is identified and used to construct a multivariate calibration model for quantification. The sensor demonstrates a 300 nM limit of detection and high selectivity in the presence of excess bovine serum albumin. This work provides the basis for designing a SERS-based assay for the detection of SARS-CoV-2 as well as engineering SERS biosensors for other viruses in the future.

Molecular Dynamics Simulations to Explore the Structure and Rheological Properties of Normal and Hyperconcentrated Airway Mucus.

We develop the first molecular dynamics model of airway mucus based on the detailed physical properties and chemical structure of the predominant gel-forming mucin MUC5B. Our airway mucus model leverages the LAMMPS open-source code [https://lammps.sandia.gov], based on the statistical physics of polymers, from single molecules to networks. On top of the LAMMPS platform, the chemical structure of MUC5B is used to superimpose proximity-based, non-covalent, transient interactions within and between the specific domains of MUC5B polymers. We explore feasible ranges of hydrophobic and electrostatic interaction strengths between MUC5B domains with 9 nanometer spatial and 1 nanosecond temporal resolution. Our goal here is to propose and test a mechanistic hypothesis for a striking clinical observation with respect to airway mucus: a 10-fold increase in non-swellable, dense structures called flakes during progression of cystic fibrosis disease. Among the myriad possible effects that might promote self-organization of MUC5B networks into flake structures, we hypothesize and confirm that the clinically confirmed increase in mucin concentration, from 1.5 to 5 mg/mL, alone is sufficient to drive the structure changes observed with scanning electron microscopy images from experimental samples. We post-process the LAMMPS simulated datasets at 1.5 and 5 mg/mL, both to image the structure transition and compare with scanning electron micrographs and to show that the 3.33-fold increase in concentration induces closer proximity of interacting electrostatic and hydrophobic domains, thereby amplifying the proximity-based strength of the interactions.

Gelator length precisely tunes supramolecular hydrogel stiffness and neuronal phenotype in 3D culture.

The brain is one of the softest tissues in the body with storage moduli (G') that range from hundreds to thousands of pascals (Pa) depending upon the anatomic region. Furthermore, pathological processes such as injury, aging and disease can cause subtle changes in the mechanical properties throughout the central nervous system. However, these changes in mechanical properties lie within an extremely narrow range of moduli and there is great interest in understanding their effect on neuron biology. We report here the design of supramolecular hydrogels based on anionic peptide amphiphile nanofibers using oligo-L-lysines of different molecular lengths to precisely tune gel stiffness over the range of interest and found that G' increases by 10.5 Pa for each additional lysine monomer in the oligo-L-lysine chain. We found that small changes in storage modulus on the order of 70 Pa significantly affect survival, neurite growth and tyrosine hydroxylase-positive population in dopaminergic neurons derived from induced pluripotent stem cells. The work reported here offers a strategy to tune mechanical stiffness of hydrogels for use in 3D neuronal cell cultures and transplantation matrices for neural regeneration.

Supramolecular Exchange among Assemblies of Opposite Charge Leads to Hierarchical Structures.

Hierarchical assemblies of proteins into fibrillar structures occur in both physiologic and pathologic extracellular spaces and often involve interactions between oppositely charged peptide domains. However, the interplay between tertiary structure dynamics and quaternary hierarchical structure formation remains unclear. In this work, we investigate supramolecular mimics of these systems by mixing one-dimensional assemblies of small alkylated peptides bearing opposite charge and varying in peptide sequence. We found that assemblies with weak cohesive interactions readily create fibrous superstructures of bundled filaments as molecules redistribute upon mixing. Low cohesion allows molecules to escape from the original assemblies and exchange dynamics help them reassemble into electrostatically stable bundles. However, we also found that kinetic barriers can be encountered in these systems and limit formation of the hierarchical structures at pH values where charge densities are high. Increasing intermolecular cohesion using longer peptide sequences that form stable ß-sheets was found to suppress superstructure formation. Our findings suggest that low internal cohesion in protein systems could facilitate the conformational rearrangements required to create hierarchical structures.

Transforming Growth Factor ß-1 Binding by Peptide Amphiphile Hydrogels.

Supramolecular biomaterials are promising systems to bind or deliver therapeutic growth factors given their great structural versatility and tunability of properties by simply mixing molecules. In this work, we have investigated this approach for the growth factor cytokine TGFß-1, which is potentially important in the regeneration of damaged cartilage or in the prevention of fibrinogenesis of organs and the progression of tumors. Our previous work identified a peptide sequence capable of binding TGFß-1 and supramolecular peptide amphiphile (PA) nanofiber hydrogels that displayed the sequence were found to enhance regeneration of cartilage in a rabbit model. In this work, we have synthesized novel PA molecules motivated by the tendency of the original bioactive peptide to undergo deamidation during purification procedures, thus interfering with synthesis of molecularly well-defined structures. We report here on novel PA nanofibers that can be purified without deamidation to establish if the chemical reaction affects chondrogenesis. Interestingly, we found that gels formed from nanofibers displaying a fully deamidated sequence by introducing an asparagine to aspartic acid mutation retain 25% more growth factor relative to those displaying the original bioactive peptide even though the individual peptides have similar affinity for the cytokine. We attribute this difference in growth factor retention to bundling of nanofibers displaying the original asparagine-containing sequence, thus masking the growth factor-binding structure. Improved retention of the growth factor resulted in chondrogenesis of cells encapsulated in the gels as indicated by a more than 50% increase in Sox 9 expressing cells at 3 days and a 100% increase in glycosaminoglycan production at 21 days. We have therefore been able to design a more effective bioactive supramolecular biomaterial to bind TGFß-1, and also demonstrated how bioactive peptide sequences in supramolecular biomaterials can have impact on their structure at larger length scales that change their biological functions.

Hierarchical Assembly of Nucleic Acid/Coiled-Coil Peptide Nanostructures.

DNA and peptides are two of the most commonly used biomolecules for building self-assembling materials, but few examples exist of hybrid nanostructures that contain both components. Here we report the modification of two peptides that comprise a coiled-coil heterodimer pair with unique DNA handles in order to link DNA origami nanostructures bearing complementary strands into micrometer-long one-dimensional arrays. We probed the effect of number of coils on self-assembly and demonstrated the formation of  structures through multiple routes: one-pot assembly, formation of dimers and trimers and an alternating copolymer of two different origami structures, and stepwise assembly of purified structures with coiled-coil conjugates. Our results demonstrate the successful merging of two distinct self-assembly modes to create hybrid bionanomaterials expected to have a range of potential applications in the future.

Encoding Reversible Hierarchical Structures with Supramolecular Peptide-DNA Materials.

Creating soft materials with the tunable hierarchical structures observed in nature remains an enormous challenge. Synthetic hierarchical systems have been reported, yet strategies to reversibly modulate their structure and function are scarce. We report on the programmable self-assembly of peptide-DNA brush copolymers into supramolecular architectures that can be tuned with changes in temperature, pH, or addition of a soluble trigger. A fiber to bundle transition occurs upon mixing peptides bearing complementary oligonucleotides. These hierarchical structures can be reversed using the programmable nature of DNA-DNA interactions. The ability to encode the final assemblies in the composition of both amino acid and DNA building blocks provides a strategy for constructing a unique class of reconfigurable supramolecular materials.

Instructing cells with programmable peptide DNA hybrids.

The native extracellular matrix is a space in which signals can be displayed dynamically and reversibly, positioned with nanoscale precision, and combined synergistically to control cell function. Here we describe a molecular system that can be programmed to control these three characteristics. In this approach we immobilize peptide-DNA (P-DNA) molecules on a surface through complementary DNA tethers directing cells to adhere and spread reversibly over multiple cycles. The DNA can also serve as a molecular ruler to control the distance-dependent synergy between two peptides. Finally, we use two orthogonal DNA handles to regulate two different bioactive signals, with the ability to independently up- or downregulate each over time. This enabled us to discover that neural stem cells, derived from the murine spinal cord and organized as neurospheres, can be triggered to migrate out in response to an exogenous signal but then regroup into a neurosphere as the signal is removed.

Hemin/G-quadruplex-catalyzed aerobic oxidation of thiols to disulfides: application of the process for the development of sensors and aptasensors and for probing acetylcholine esterase activity.

This study describes the novel hemin/G-quadruplex DNAzyme-catalyzed aerobic oxidation of thiols to disulfides and the respective mechanism. The mechanism of the reaction involves the DNAzyme-catalyzed oxidation of thiols to disulfides and the thiol-mediated autocatalytic generation of H2O2 from oxygen. The coupling of a concomitant H2O2-mediated hemin/G-quadruplex-catalyzed oxidation of Amplex Red to the fluorescent resorufin as a transduction module provides a fluorescent signal for probing the catalyzed oxidation of the thiol to disulfides and for probing sensing processes that yield the hemin/G-quadruplex as a functional label. Accordingly, a versatile sensing method for analyzing thiols (L-cysteine, glutathione) using the H2O2-mediated DNAzyme-catalyzed oxidation of Amplex Red to the resorufin was developed. Also, the L-cysteine and Amplex Red system was implemented as an auxiliary fluorescent transduction module for probing recognition events that form the catalytic hemin/G-quadruplex structures. This is exemplified with the development of thrombin aptasensor. The thrombin/thrombin binding aptamer recognition complex binds hemin, and the resulting catalytic complex activates the auxiliary transduction module, involving the aerobic oxidation of l-cysteine and the concomitant formation of the fluorescent resorufin. Finally, the hemin/G-quadruplex DNAzyme/Amplex Red system was used to follow the activity of acetylcholine esterase, AChE, and to probe its inhibition. The AChE-catalyzed hydrolysis of acetylthiocholine to the thiol-functionalized thiocholine enabled the probing of the enzymatic activity of AChE through the hemin/G-quadruplex-catalyzed aerobic oxidation of thiocholine to the respective disulfide and the concomitant generation of the fluorescent resorufin product.

Optical aptasensors for the analysis of the vascular endothelial growth factor (VEGF).

The vascular endothelial growth factor, VEGF, is an important biomarker for different diseases and clinical disorders. We present a series of optical aptasensor-based sensing platforms for VEGF that include the following: (i) A FRET-based sensor that involves the VEGF-induced separation of aptamer-functionalized quantum dots blocked by a quencher nucleic acid (detection limit 1 nM). (ii) A FRET-based sensor based on the VEGF-induced assembly of the aptamer subunits functionalized with QDs and a dye acceptor (Cy5), respectively (detection limit 12 nM). (iii) A chemiluminescence aptasensor based on VEGF-induced assembly of a hemin/G-quadruplex catalyst (detection limit 18 nM). (iv) A chemiluminescence aptasensor based on the VEGF-stimulated assembly of two aptamer subunits into the hemin/G-quadruplex catalyst (detection limit 2.6 nM). (v) A chemiluminescence resonance energy transfer (CRET) aptasensor based on the VEGF-induced assembly of a semiconductor QDs-hemin/G-quadruplex supramolecular structure (detection limit 875 pM). Furthermore, an amplified optical aptasensor system based on the Exonuclease III (Exo III) recycling of the VEGF analyte was developed. In this system, one aptamer subunit is modified at its 5' and 3' ends with QDs and a black hole quencher, respectively. The VEGF-induced self-assembly of the aptamer subunits result in the digestion of the quencher units and the autonomous recycling of the analyte, while triggering-on the luminescence of the QDs (detection limit 5 pM). The system was implemented to analyze VEGF in human sera samples.

Fluorescence detection of DNA, adenosine-5'-triphosphate (ATP), and telomerase activity by zinc(II)-protoporphyrin IX/G-quadruplex labels.

The zinc(II)-protoporphyrin IX (ZnPPIX) fluorophore binds to G-quadruplexes, and this results in the enhanced fluorescence of the fluorophore. This property enabled the development of DNA sensors, aptasensors, and a sensor following telomerase activity. The DNA sensor is based on the design of a hairpin structure that includes a "caged" inactive G-quadruplex sequence. Upon opening the hairpin by the analyte DNA, the resulting fluorescence of the ZnPPIX/G-quadruplex provides the readout signal for the sensing event (detection limit 5 nM). Addition of Exonuclease III to the system allows the recycling of the analyte and its amplified analysis (detection limit, 200 pM). The association of the ZnPPIX to G-quadruplex aptamer-substrate complexes allowed the detection of adenosine-5'-triphosphate (ATP, detection limit 10 µM). Finally, the association of ZnPPIX to the G-quadruplex repeat units of telomers allowed the detection of telomerase activity originating from 380 ± 20 cancer 293T cell extract.

Chemiluminescence and chemiluminescence resonance energy transfer (CRET) aptamer sensors using catalytic hemin/G-quadruplexes.

The incorporation of hemin into the thrombin/G-quadruplex aptamer assembly or into the ATP/G-quadruplex nanostructure yields active DNAzymes that catalyze the generation of chemiluminescence. These catalytic processes enable the detection of thrombin and ATP with detection limits corresponding to 200 pM and 10 µM, respectively. The conjugation of the antithrombin or anti-ATP aptamers to CdSe/ZnS semiconductor quantum dots (QDs) allowed the detection of thrombin or ATP through the luminescence of the QDs that is powered by a chemiluminescence resonance energy-transfer (CRET) process stimulated by the hemin/G-quadruplex/thrombin complex or the hemin/G-quadruplex/ATP nanostructure, in the presence of luminol/H(2)O(2). The advantages of applying the CRET process for the detection of thrombin or ATP, by the resulting hemin/G-quadruplex DNAzyme structures, are reflected by low background signals and the possibility to develop multiplexed aptasensor assays using different sized QDs.

Electron-transfer quenching of nucleic acid-functionalized CdSe/ZnS quantum dots by doxorubicin: a versatile system for the optical detection of DNA, aptamer-substrate complexes and telomerase activity.

The optical detection of DNA or the sensing of low-molecular-weight substrates or proteins by aptamer nucleic acids is a long term challenge in the design of biosensors. Similarly, the detection of the telomerase activity, a versatile biomarker of cancer cells, is important for rapid cancer diagnostics. We implement the luminescence quenching of the CdSe/ZnS quantum dots (QDs) as a versatile process to develop DNA sensors and aptasensors, and to design an analytical platform for the detection of telomerase activity. The formation of nucleic acid duplexes on QDs, or the assembly of aptamer-substrate complexes on the QDs (substrate=cocaine or thrombin) is accompanied by the intercalation of doxorubicin (DB) into the duplex domains of the resulting recognition complexes. The intercalated DB quenches the luminescence of the QDs, thus leading to the detection readout signal. Similarly, the telomerase-induced formation of the telomere chains on the QDs is followed by the hybridization of nucleic-acid units complementary to the telomere repeat units, and the intercalation of DB into the resulting duplex structure. The resulting luminescence quenching of the QDs provides an indicating signal for the activity of telomerase.

Self-assembly of supramolecular aptamer structures for optical or electrochemical sensing.

The self-assembly of labeled aptamer sub-units in the presence of their substrates provides a method for the optical (fluorescence) or electrochemical detection of the substrate. One of the sub-units is linked to CdSe/ZnS quantum dots (QDs), and the self-assembly of the dye-functionalized second sub-unit with the modified QDs, in the presence of cocaine, stimulates fluorescence resonance energy transfer (FRET). This enables the detection of cocaine with a detection limit corresponding to 1 x 10(-6) M. Alternatively, the aptamer fragments are modified with pyrene units. The formation of a supramolecular aptamer-substrate complex allosterically stabilizes the formation of excimer supramolecular structure, and its characteristic emission is observed. In addition, the thiolated aptamer sub-unit is assembled on an Au electrode. The Methylene Blue-labeled sub-unit binds to the surface-confined fragment in the presence of cocaine. The amperometric response of the system allows the detection of cocaine with a detection limit of 1 x 10(-5) M. The approach is generic and can be applied to other substrates, e.g. adenosine triphosphate.