Trochlear Dysplasia Is Associated With Increased Sagittal Tibial Tubercle Trochlear-Groove Distance in Patients With Patellar Instability.

PURPOSE: To compare the sagittal position of the tibial tubercle in relation the trochlea groove in patients with and without trochlear dysplasia (TD). Patients with high-grade TD show a significantly increased sagittal position of the tibial tubercle in relation to the trochlear groove (sTTTG) compared with patients without TD. This may affect patellofemoral loading and contribute to the increased prevalence of cartilage lesions seen in the patellofemoral joint of patients with dysplasia of the trochlear groove. METHODS: All patients between January 2017 and December 2020 with high-grade TD (Dejour type B, C, and D) who underwent patellar-stabilizing surgery for patellar instability at a single institution were included in the current study. Patients without preoperative magnetic resonance imaging (MRI), any previous osteotomy on the affected lower extremity, or cruciate ligament insufficiency were excluded. Patients who underwent knee arthroscopy for meniscal repair/debridement without any signs of TD or any of the aforementioned criteria served as the control group. Preoperative MRI was retrospectively assessed to compare common patellofemoral anatomic parameters including patellar angle, patellar tilt, patella morphology according to Wiberg, Caton-Deschamps index, PF index, trochlear sulcus angle, sulcus depth, lateral inclination angle of the trochlea, tibiofemoral rotation, TTTG, and sTTTG distance between both groups. The sTTTG is measured as the distance between the nadir point of the cartilaginous trochlear groove and the most anterior point of the tibial tubercle on an axial MRI. Independent predictors for the sTTTG were assessed for patients with TD. RESULTS: Patients with high-grade TD (n = 82) showed an increased patellar tilt, Caton-Deschamps index, trochlear sulcus angle, lateral tibiofemoral rotation angle, TTTG, and sTTTG (9.16 ± 4.47 mm vs 2.66 ± 4.21 mm) compared with the control group (n = 83) (P < .001). Patellar angle, PF index, sulcus depth, and lateral inclination angle of the trochlear were significantly decreased in the TD group (P < .001). The sTTTG was similar in all TD groups (n.s.). Among patients with TD, both tibiofemoral rotation and patellar height were independent predictors of the sTTTG (P < .05). CONCLUSIONS: Patients with high-grade TD show not only abnormal values in common patellofemoral instability risk factors but also a significantly increased sTTTG compared with patients without TD. LEVEL OF EVIDENCE: Level III, retrospective case comparative study.

No significant change of tibiofemoral rotation after femoral rotational osteotomy in patients with patellofemoral instability.

PURPOSE: An increased value of tibiofemoral rotation is frequently observed in patients with patellofemoral instability or maltracking. Nevertheless, the appropriate approach for addressing this parameter remains unclear so far. One potential approach for correcting tibiofemoral rotation is femoral rotational osteotomy. We hypothesized that femoral rotational osteotomy affects tibiofemoral rotation. METHODS: All patients who underwent femoral rotational osteotomy between January 2018 and May 2022 were included in this study. Pre- and postoperative tibiofemoral rotation and the degree of femoral rotation were measured using two-dimensional (2D) and three-dimensional (3D) measurements. The effect of femoral rotation on tibiofemoral rotation was assessed. RESULTS: Forty knees (18 right and 22 left) of 36 patients (28 females and 8 males) were included. Mean preoperative femoral torsion was 32.1 ± 10.1° in 2D and 30.8 ± 10.1° in 3D. Femoral rotation was performed by -14.1 ± 8.3° using 2D measurements and -15.0 ± 8.0° using 3D measurements. Tibiofemoral rotation changed from 9.9 ± 6.2° to 9.7 ± 6.0° (p = n.s.) in 2D, and from 10.2 ± 5.5° to 9.4 ± 5.4° (p = n.s.) in 3D. CONCLUSION: Tibiofemoral rotation showed no significant changes after femoral rotational osteotomy. Hence, femoral rotational osteotomy cannot be used to correct tibiofemoral rotation in addition to correcting the femoral version. Other surgical techniques need to be evaluated if correction of tibiofemoral rotation is required. LEVEL OF EVIDENCE: Level III.

Deep-learning based 3D reconstruction of lower limb bones from biplanar radiographs for preoperative osteotomy planning.

PURPOSE: Three-dimensional (3D) preoperative planning has become the gold standard for orthopedic surgeries, primarily relying on CT-reconstructed 3D models. However, in contrast to standing radiographs, a CT scan is not part of the standard protocol but is usually acquired for preoperative planning purposes only. Additionally, it is costly, exposes the patients to high doses of radiation and is acquired in a non-weight-bearing position. METHODS: In this study, we develop a deep-learning based pipeline to facilitate 3D preoperative planning for high tibial osteotomies, based on 3D models reconstructed from low-dose biplanar standing EOS radiographs. Using digitally reconstructed radiographs, we train networks to localize the clinically required landmarks, separate the two legs in the sagittal radiograph and finally reconstruct the 3D bone model. Finally, we evaluate the accuracy of the reconstructed 3D models for the particular application case of preoperative planning, with the aim of eliminating the need for a CT scan in specific cases, such as high tibial osteotomies. RESULTS: The mean Dice coefficients for the tibial reconstructions were 0.92 and 0.89 for the right and left tibia, respectively. The reconstructed models were successfully used for clinical-grade preoperative planning in a real patient series of 52 cases. The mean differences to ground truth values for mechanical axis and tibial slope were 0.52° and 4.33°, respectively. CONCLUSIONS: We contribute a novel framework for the 2D-3D reconstruction of bone models from biplanar standing EOS radiographs and successfully use them in automated clinical-grade preoperative planning of high tibial osteotomies. However, achieving precise reconstruction and automated measurement of tibial slope remains a significant challenge.

Increased tibial tuberosity torsion has the greatest predictive value in patients with patellofemoral instability compared to other commonly assessed parameters.

PURPOSE: The multifactorial nature of patellofemoral instability requires a comprehensive assessment of the affected patients. While an association between tibial tuberosity (TT) torsion and patellofemoral instability is known, its specific effect has not yet been investigated. This study investigated the effect of TT torsion on patellofemoral instability. METHODS: This retrospective cohort study compared patients who underwent surgical intervention for patellofemoral instability and asymptomatic controls. TT torsion was measured in addition to other commonly assessed risk factors for patellofemoral instability using standardised computed tomography (CT) data of the lower extremities. The diagnostic performances of the assessed parameters were evaluated using receiver operating characteristic curve analysis and odds ratios (ORs) were calculated. RESULTS: The patellofemoral instability group consisted of 79 knees, compared to 72 knees in the asymptomatic control group. Both groups differed significantly in all assessed parameters (p < 0.001), except for tibial torsion (n.s.). Among all parameters, TT torsion presented the best diagnostic performance for predicting patellar instability with an area under the curve of 0.95 (95% confidence interval [CI], 0.91-0.98; p < 0.001). A cut-off value of 17.7° yielded a 0.87 sensitivity and 0.89 specificity to predict patellar instability (OR, 55.2; 95% CI, 20.5-148.6; p < 0.001). CONCLUSION: Among the evaluated risk factors, TT torsion had the highest predictive value for patellofemoral instability. Patients with TT torsions ≥ 17.7° showed a 55-fold increased probability of patellofemoral instability. Therefore, TT torsion should be included in the assessment of patients with patellofemoral instability. LEVEL OF EVIDENCE: Level III.

The influence of the weight-bearing state on three-dimensional (3D) planning in lower extremity realignment - analysis of novel vs. state-of-the-art planning approaches.

BACKGROUND: The use of 3D planning to guide corrective osteotomies of the lower extremity is increasing in clinical practice. The use of computer-tomography (CT) data acquired in supine position neglects the weight-bearing (WB) state and the gold standard in 3D planning involves the manual adaption of the surgical plan after considering the WB state in long-leg radiographs (LLR). However, this process is subjective and dependent on the surgeons experience. A more standardized and automated method could reduce variability and decrease costs. PURPOSE: The aim of the study was (1) to compare three different three-dimensional (3D) planning modalities for medial open-wedge high tibial osteotomy (MOWHTO) and (2) to describe the current practice of adapting NWB CT data after considering the WB state in LLR. The purpose of this study is to validate a new, standardized approach to include the WB state into the 3D planning and to compare this method against the current gold standard of 3D planning. Our hypothesis is that the correction is comparable to the gold standard, but shows less variability due compared to the more subjective hybrid approach. METHODS: Three surgical planning modalities were retrospectively analyzed in 43 legs scheduled for MOWHTO between 2015 and 2019. The planning modalities included: (1) 3D hybrid (3D non-weight-bearing (NWB) CT models after manual adaption of the opening angle considering the WB state in LLR, (2) 3D NWB (3D NWB CT models) and (3) 3D WB (2D/3D registration of 3D NWB CT models onto LLR to simulate the WB state). The pre- and postoperative hip-knee-ankle angle (HKA) and the planned opening angle (°) were assessed and differences among modalities reported. The relationship between the reported differences and BMI, preoperative HKA (LLR), medial meniscus extrusion, Outerbridge osteoarthritis grade and joint line convergence angle (JLCA) was analyzed. RESULTS: The mean (std) planned opening angle of 3D hybrid did not differ between 3D hybrid and 3D WB (0.4 ± 2.1°) (n.s.) but was higher in 3D hybrid compared to 3D NWB (1.1° ± 1.1°) (p = 0.039). 3D WB demonstrated increased preoperative varus deformity compared to 3D NWB: 6.7 ± 3.8° vs. 5.6 ± 2.7° (p = 0.029). Patients with an increased varus deformity in 3D WB compared to 3D NWB (> 2 °) demonstrated more extensive varus alignment in LLR (p = 0.009) and a higher JLCA (p = 0.013). CONCLUSION: Small intermodal differences between the current practice of the reported 3D hybrid planning modality and a 3D WB approach using a 2D/3D registration algorithm were reported. In contrast, neglecting the WB state underestimates preoperative varus deformity and results in a smaller planned opening angle. This leads to potential under correction in MOWHTO, especially in patients with extensive varus deformities or JLCA. CLINICAL RELEVANCE: Incorporating the WB state in 3D planning modalities has the potential to increase accuracy and lead to a more consistent and reliable planning in MOWHTO. The inclusion of the WB state in automatized surgical planning algorithms has the potential to reduce costs and time in the future.

The coronal alignment differs between two-dimensional weight-bearing and three-dimensional nonweight bearing planning in total knee arthroplasty.

Purpose: The goal of this study is (1) to assess differences between two-dimensional (2D) weight-bearing (WB) and three-dimensional (3D) nonweight-bearing (NWB) planning in total knee arthroplasty (TKA) and (2) to identify factors that influence intermodal differences. Methods: Retrospective single-centre analysis of patients planned for a TKA with patient-specific instruments (PSI). Preoperative WB long-leg radiographs and NWB computed tomography were analysed and following radiographic parameters included: hip-knee-ankle angle (HKA) (+varus/-valgus), joint line convergence angle (JLCA), femorotibial subluxation and bony defect classified according to Anderson. Preoperative range of motion was also considered as possible covariate. Demographic factors included age, sex, and body mass index. Results: A total of 352 knees of 323 patients (66% females) with a mean age of 66 ± 9.7 years were analysed. The HKA differed significantly between 2D and 3D planning modalities; varus knees (n = 231): 9.9° ± 5.1° vs. 6.7° ± 4°, p < 0.001; valgus knees (n = 121): -8.2° ± 6° vs. -5.5° ± 4.4°, p < 0.001. In varus knees, HKA (ß = 0.38; p < 0.0001) and JLCA (ß = 0.14; p = 0.03) were associated with increasing difference between 2D/3D HKA. For valgus knees, HKA (ß = -0.6; p < 0.0001), JLCA (ß = -0.3; p = 0.0001) and lateral distal femoral angle (ß = -0.28; p = 0.03) showed a significant influence on the mean absolute difference. Conclusion: The coronal alignment in preoperative 3D model for PSI-TKA significantly differed from 2D WB state and the difference between modalities correlated with the extent of varus/valgus deformity. In the vast majority of cases, the 3D NWB approach significantly underestimated the preoperative deformity, which needs to be considered to achieve the planned correction when using PSI in TKA. Level of Evidence: Level III.

Morphological and Quantitative Parametric MRI Follow-up of Cartilage Changes Before and After Intra-articular Injection Therapy in Patients With Mild to Moderate Knee Osteoarthritis: A Randomized, Placebo-Controlled Trial.

BACKGROUND: Intra-articular injections are routinely used for conservative treatment of knee osteoarthritis (OA). The detailed comparative therapeutic effects of these injections on cartilage tissue are still unclear. OBJECTIVE: The aim of this study was to detect and compare knee cartilage changes after intra-articular injection of glucocorticoid, hyaluronic acid, or platelet-rich plasma (PRP) to placebo using quantitative (T2 and T2* mapping) and morphological magnetic resonance imaging parameters in patients with mild or moderate osteoarthritis. MATERIALS AND METHODS: In a double-blinded, placebo-controlled, single-center trial, knees with mild or moderate osteoarthritis (Kellgren-Lawrence grade 1-3) were randomly assigned to an intra-articular injection with 1 of these substances: glucocorticoid, hyaluronic acid, PRP, or placebo. Cartilage degeneration on baseline and follow-up magnetic resonance imaging scans (after 3 and 12 months) was assessed by 2 readers using quantitative T2 and T2* times (milliseconds) and morphological parameters (modified Outerbridge grading, subchondral bone marrow edema, subchondral cysts, osteophytes). RESULTS: One hundred twenty knees (30 knees per treatment group) were analyzed with a median patient age of 60 years (interquartile range, 54.0-68.0 years). Interreader reliability was good for T2 (ICC, 0.76; IQR, 0.68-0.83) and T2* (ICC, 0.83; IQR, 0.76-0.88) measurements. Morphological parameters showed no significant changes between all groups after 3 and 12 months. T2 mapping after 12 months showed the following significant ( P = 0.001-0.03) changes between groups in 6 of 14 compartments: values after PRP injection decreased compared with glucocorticoid in 4 compartments (complete medial femoral condyle and central part of lateral condyle) and compared with placebo in 2 compartments (anterior and central part of medial tibial plateau); values after glucocorticoid injection decreased compared with placebo in 1 compartment (central part of medial tibial plateau). No significant changes were seen for T2 and T2* times after 3 months and T2* times after 12 months. No correlation was found between T2/T2* times and Kellgren-Lawrence grade, age, body mass index, or pain (Spearman ρ, -0.23 to 0.18). CONCLUSIONS: Platelet-rich plasma injection has a positive long-term effect on cartilage quality in the medial femoral compartment compared to glucocorticoid, resulting in significantly improved T2 values after 12 months. For morphological cartilage parameters, injections with glucocorticoid, PRP, or hyaluronic acid showed no better effect in the short or long term compared with placebo.

Exercise- and education-based prehabilitation before total knee arthroplasty: a pilot study.

OBJECTIVE: To determine the feasibility and estimates of effects of a supervised exercise- and education-based prehabilitation programme aiming to improve knee functioning compared with usual care in patients awaiting total knee arthroplasty. DESIGN: A randomized controlled pilot study. SUBJECTS: Patients receiving primary, unilateral total knee arthroplasty. METHODS: Patients randomized to the intervention group participated in a personalized 4-8-week prehabilitation programme before surgery. Feasibility of the intervention and self-reported knee functioning, pain, physical performance and hospital stay were assessed at baseline, immediately preoperatively, 6 and 12 weeks after surgery. RESULTS: Twenty patients (mean age 72.7±5.95 years) were enrolled in this study. The personalized prehabilitation programme was found to be feasible and safe, with an exercise adherence of 90%. Significant medium interaction effects between groups and over time favouring prehabilitation were reported for the sport subscale of the Knee Osteoarthritis Outcome Score (F(3/54) = 2.895, p = 0.043, η² = 0.139) and Tegner Activity Scale (F(2.2/39.1) = 3.20, p = 0.048, η² = 0.151). CONCLUSION: The absence of adverse events and high adherence to the programme, coupled with beneficial changes shown in the intervention group, support the conduct of a full-scale trial investigating the effectiveness of prehabilitation.

[Osteotomies around the knee: preoperative planning using CT-based three-dimensional analysis, patient-specific cutting and reduction guides]. / Kniegelenknahe Osteotomien: operative Planung mithilfe von CT-3-D-Analyse, patientenspezifischen Schnitt- und Korrekturblöcken.

OBJECTIVE: The goal of osteotomy is either to restore pretraumatic anatomic conditions or to shift the load to less affected compartments. INDICATIONS: Indications for computer-assisted 3D analysis and the use of patient-specific osteotomy and reduction guides include "simple" deformities and, in particular, multidimensional complex (especially posttraumatic) deformities. CONTRAINDICATIONS: General contraindications for performing a computed tomography (CT) scan or for an open approach for performing the surgery. SURGICAL TECHNIQUE: Based on CT examinations of the affected and, if necessary, the contralateral healthy extremity as a healthy template (including hip, knee, and ankle joints), 3D computer models are generated, which are used for 3D analysis of the deformity as well as for calculation of the correction parameters. For the exact and simplified intraoperative implementation of the preoperative plan, individualized guides for the osteotomy and the reduction are produced by 3D printing. POSTOPERATIVE MANAGEMENT: Partial weight-bearing from the first postoperative day. Increasing load after the first x­ray control 6 weeks postoperatively. No limitation of the range of motion. RESULTS: There are several studies that have analyzed the accuracy of the implementation of the planned correction for corrective osteotomies around the knee joint with the use of patient-specific instruments with promising results.

Osteoconductive Scaffold Placed at the Femoral Tunnel Aperture in Hamstring Tendon ACL Reconstruction: A Randomized Controlled Trial.

Background: Bone tunnel enlargement after single-bundle anterior cruciate ligament reconstruction remains an unsolved problem that complicates revision surgery. Hypothesis: Positioning of an osteoconductive scaffold at the femoral tunnel aperture improves graft-to-bone incorporation and thereby decreases bone tunnel widening. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: In a 1:1 ratio, 56 patients undergoing primary anterior cruciate ligament reconstruction were randomized to receive femoral fixation with cortical suspension fixation and secondary press-fit fixation at the tunnel aperture of the tendon graft only (control) or with augmentation by an osteoconductive scaffold (intervention). Adverse events, patient-reported outcomes, and passive knee stability were recorded over 2 years after the index surgery. Three-dimensional bone tunnel widening was assessed using computed tomography at the time of surgery and 4.5 months and 1 year postoperatively. Results: The intervention group exhibited a similar number of adverse events as the control group (8 vs 10; P = .775) including 2 partial reruptures in both groups. The approach was feasible, although 1 case was encountered where the osteoconductive scaffold was malpositioned without adversely affecting the patient's recovery. There was no difference between the intervention and control groups in femoral bone tunnel enlargement, as expressed by the relative change in tunnel volume from surgery to 4.5 months (mean ± SD, 36% ± 25% vs 40% ± 25%; P = .644) and 1 year (19% ± 20% vs 17% ± 25%; P =.698). Conclusion: Press-fit graft fixation with an osteoconductive scaffold positioned at the femoral tunnel aperture is safe but does not decrease femoral bone tunnel enlargement at postoperative 1 year. Registration: NCT03462823 (ClinicalTrials.gov identifier).

An automated optimization pipeline for clinical-grade computer-assisted planning of high tibial osteotomies under consideration of weight-bearing.

3D preoperative planning for high tibial osteotomies (HTO) has increasingly replaced 2D planning but is complex, time-consuming and therefore expensive. Several interdependent clinical objectives and constraints have to be considered, which often requires multiple rounds of revisions between surgeons and biomedical engineers. We therefore developed an automated preoperative planning pipeline, which takes imaging data as an input to generate a ready-to-use, patient-specific planning solution. Deep-learning based segmentation and landmark localization was used to enable the fully automated 3D lower limb deformity assessment. A 2D-3D registration algorithm allowed the transformation of the 3D bone models into the weight-bearing state. Finally, an optimization framework was implemented to generate ready-to use preoperative plannings in a fully automated fashion, using a genetic algorithm to solve the multi-objective optimization (MOO) problem based on several clinical requirements and constraints. The entire pipeline was evaluated on a large clinical dataset of 53 patient cases who previously underwent a medial opening-wedge HTO. The pipeline was used to automatically generate preoperative solutions for these patients. Five experts blindly compared the automatically generated solutions to the previously generated manual plannings. The overall mean rating for the algorithm-generated solutions was better than for the manual solutions. In 90% of all comparisons, they were considered to be equally good or better than the manual solution. The combined use of deep learning approaches, registration methods and MOO can reliably produce ready-to-use preoperative solutions that significantly reduce human workload and related health costs.

Three-dimensional analysis of functional femoral antetorsion and the position of the greater trochanter in high-grade patellofemoral dysplastic knees.

BACKGROUND: The relationship between functional femoral antetorsion, the greater trochanter (GT) position and anatomical antetorsion has been demonstrated in patients with a primary hip pathology. However, the functional antetorsion and GT position have not been analyzed in patellofemoral dysplastic knees. The aim of this study was to develop a three-dimensional (3D) measurement to quantify the functional femoral antetorsion and position of the GT and to analyze these measurements in a cohort of high-grade patellofemoral dysplastic knees. METHOD: A 3D measurement was developed to analyze functional antetorsion and the axial position of the GT and assessed in 100 cadaveric femora. For validity and repeatability testing, inter- and intra-observer reliability were determined using intraclass correlation coefficients (ICCs). These measurements were then evaluated in a cohort of 19 high-grade patellofemoral dysplastic knees (Dejour type C, D). The relationship between anatomical antetorsion, functional antetorsion and GT position were reported. RESULTS: Inter- and intra-reader reliability for 3D functional antetorsion and axial position of the GT demonstrated a minimum ICC of 0.96 (P < 0.001). Anatomical and functional antetorsion demonstrated a highly linear relationship (R2 = 0.878; P < 0.001) in high-grade patellofemoral dysplastic knees. The mean difference between anatomical and functional antetorsion decreased with increasing anatomical antetorsion (R2 = 0.25; P = 0.031, indicating a more anterior position of the GT relative to the femoral neck axis. CONCLUSION: In high-grade patellofemoral dysplastic knees, the GT is located more anteriorly, relative to the femoral neck axis, with increasing anatomical antetorsion and correction osteotomy may result in an excessively anterior position of the GT.

Extent of posterolateral tibial plateau impaction fracture correlates with anterolateral complex injury and has an impact on functional outcome after ACL reconstruction.

PURPOSE: The impact of posterolateral tibial plateau impaction fractures (TPIF) on posttraumatic knee stability in the setting of primary anterior cruciate ligament (ACL) tear is unknown. The main objective was to determine whether increased bone loss of the posterolateral tibial plateau is associated with residual rotational instability and impaired functional outcome after ACL reconstruction. METHODS: A cohort was identified in a prospective enrolled study of patients suffering acute ACL injury who underwent preoperative standard radiographic diagnostics and clinical evaluation. Patients were included when scheduled for isolated single-bundle hamstring autograft ACL reconstruction. Exclusion criteria were concurrent anterolateral complex (ALC) reconstruction (anterolateral tenodesis), previous surgery or symptoms in the affected knee, partial ACL tear, multi-ligament injury with an indication for additional surgical intervention, and extensive cartilage wear. On MRI, bony (TPIF, tibial plateau, and femoral condyle morphology) and ligament status (ALC, concomitant collateral ligament, and meniscus injuries) were assessed by a musculoskeletal radiologist. Clinical evaluation consisted of KT-1000, pivot-shift, and Lachman testing, as well as Tegner activity and IKDC scores. RESULTS: Fifty-eight patients were included with a minimum follow-up of 12 months. TPIF was identified in 85% of ACL injuries (n = 49). The ALC was found to be injured in 31 of 58 (53.4%) cases. Pearson analysis showed a positive correlation between TPIF and the degree of concomitant ALC injury (p < 0.001). Multiple regression analysis revealed an increased association of high-grade TPIF with increased lateral tibial convexity (p = 0.010). The high-grade TPIF group showed worse postoperative Tegner scores 12 months postoperatively (p = 0.035). CONCLUSION: Higher degrees of TPIFs are suggestive of a combined ACL/ALC injury. Moreover, patients with increased posterolateral tibial plateau bone loss showed lower Tegner activity scores 12 months after ACL reconstruction. LEVEL OF EVIDENCE: III.

Increased femoral curvature and trochlea flexion in high-grade patellofemoral dysplastic knees.

PURPOSE: High-grade patellofemoral dysplasia is often associated with concomitant axial and frontal leg malalignment. However, curvature of the femur and sagittal flexion of the trochlea has not yet been studied in patellofemoral dysplastic knees. The aim of the study was to quantify the femoral curvature and sagittal flexion of the trochlea in both high-grade patellofemoral dysplastic and healthy knees. METHODS: A retrospective case-control study matched 19 high-grade patellofemoral dysplastic knees (Dejour types C and D) with 19 healthy knees according to sex and body mass index. Three-dimensional (3D) femoral curvature and sagittal trochlea flexion were analysed. To analyse femoral curvature, the specific 3D radius of curvature (ROC) was calculated. Trochlear flexion was quantified through the development of the trochlea flexion angle (TFA), which is a novel 3D measurement in relation to the anatomical and mechanical femur axis and is referred to as 3D TFAanatomic and 3D TFAmech. The influence of age, gender, height, weight and frontal and axial alignment on ROC and TFA was analysed in a multiple regression model. RESULTS: Overall ROC was significantly smaller in dysplastic knees, compared with the control group [898.4 ± 210.8 mm (range 452.9-1275.1 mm) vs 1308.4 ± 380.5 mm (range 878.3-2315.8 mm), p < 0.001]. TFA was significantly higher in dysplastic knees, compared with the control group, for 3D TFAmech [13.8 ± 7.2° (range 4.4-33.4°) vs 6.5 ± 2.3° (range 0.8-10.2°), p < 0.001] and 3D TFAanatomic [12.5 ± 7.2° (range 3.1-32.2°) vs 6.4 ± 1.9° (range 2.1-9.1°), p = 0.001]. A smaller ROC was associated with smaller height, female gender and higher femoral ante torsion. An increased TFA was associated with valgus malalignment. CONCLUSION: High-grade patellofemoral dysplastic knees demonstrated increased femoral curvature and sagittal flexion of the trochlea, compared with healthy knees. The ROC and newly described TFA allowed the quantification of the sagittal femoral deformity. TFA and ROC should be incorporated in future deformity analysis to investigate their potential as a target for surgical correction. LEVEL OF EVIDENCE: Level III.

Decrease of tibial tuberosity trochlear groove distance following mechanically aligned total knee arthroplasty.

PURPOSE: Anterior knee pain (AKP) is common following total knee arthroplasty. The tibial tuberosity trochlear groove distance (TTTG) influences patellofemoral joint loading in the native knee. Increased TTTG may lead to maltracking of the patella and anterior knee pain. The purpose of this study was to investigate potential changes in TTTG following total knee arthroplasty (TKA). METHODS: TTTG was measured on preoperative CT data on a consecutive series of patients scheduled to receive TKA with patient-specific instrumentation, and compared to a computer simulation of the postoperative TTTG. Preoperative TTTG was measured with a 3D planning software in 250 knees. The postoperative result was simulated and TTTG measured within the software. Three different groups were analysed: neutral (180° ± 3) (n = 50), valgus (> 190°) (n = 100), and varus (< 170°) (n = 100). RESULTS: Median preoperative to simulated postoperative TTTG decreased from 15.0 [interquartile range (IQR) 6.0] mm to 6.5 (IQR 5.0) mm for all axes combined. A significant postoperative reduction of TTTG was found in each group (p < 0.001). The mean change in TTTG did not differ significantly between the groups [- 8.8 (IQR 5.5) mm neutral, - 8.3 (IQR 7.0) mm valgus, - 7.5 (IQR 5.8) mm varus, p = 0.223]. CONCLUSION: This computer-based study suggests that mechanically aligned TKA significantly decreases TTTG distance in neutral, valgus and varus knees, assuming that the postoperative result coincides with the preoperative planning. Further study is warranted to evaluate the clinical relevance of this finding.

Excessive femoral torsion is not associated with patellofemoral pain or instability if TKA is functionally aligned and the patella denervated.

PURPOSE: Recent data suggest that individual morphologic factors should be respected to restore preoperative patellofemoral alignment and thus reduce the likelihood of anterior knee pain. The goal of this study was to investigate the effect of excessive femoral torsion (FT) on clinical outcome of TKA. METHODS: Patients who underwent TKA and complete preoperative radiographic evaluation including a long-leg radiograph and CT scan were included. 51 patients showed increased FT of > 20° and were matched for age/sex to 51 controls (FT < 20°). Thirteen patients were lost to follow-up. Thirty-eight matched pairs were compared after a 2 year follow-up clinically (Kujala and patellofemoral score for TKA) and radiographically (FT, frontal leg axis, TT-TG, patellar thickness, patellar tilt, and lateral displacement of patella). Functional alignment of TKA was performed (hybrid-technique). All patellae were denervated but no patella was resurfaced. RESULTS: There was no significant difference between clinical scores two years after surgery between patients with normal and excessive FT (n.s.). Kujala score was 64.3 ± 16.7 versus 64.8 ± 14.4 (n.s.), and patellofemoral score for TKA was 74.3 ± 21 versus 78.5 ± 20.7 (n.s.) for increased FT group and control group, respectively. There was no correlation between preoperative FT and clinical scores. Other radiographic parameters were similar between both groups. No correlations between clinical outcomes and preoperative/postoperative frontal leg axis or total leg axis correction were found (n.s.). CONCLUSION: If the leg axis deformity is corrected to a roughly neutral alignment during cemented TKA, including patellar denervation, then excessive FT was not associated with patellofemoral pain or instability. LEVEL OF EVIDENCE: Prospective comparative study, level II.

Tibial tunnel enlargement is affected by the tunnel diameter-screw ratio in tibial hybrid fixation for hamstring ACL reconstruction.

INTRODUCTION: There is no evidence on screw diameter with regards to tunnel size in anterior cruciate ligament reconstruction (ACLR) using hybrid fixation devices. The hypothesis was that an undersized tunnel coverage by the tibial screw leads to subsequent tunnel enlargement in ACLR in hybrid fixation technique. METHODS: In a retrospective case series, radiographs and clinical scores of 103 patients who underwent primary hamstring tendon ACLR with a hybrid fixation technique at the tibial site (interference screw and suspensory fixation) were obtained. Tunnel diameters in the frontal and sagittal planes were measured on radiographs 6 weeks and 12 months postoperatively. Tunnel enlargement of more than 10% between the two periods was defined as tunnel widening. Tunnel coverage ratio was calculated as the tunnel diameter covered by the screw in percentage. RESULTS: Overall, tunnel widening 12 months postoperatively was 23.1 ± 17.1% and 24.2 ± 18.2% in the frontal and sagittal plane, respectively. Linear regression analysis revealed the tunnel coverage ratio to be a negative predicting risk factor for tunnel widening (p = 0.001). The ROC curve analysis provided an ideal cut-off for tunnel enlargement of > 10% at a tunnel coverage ratio of 70% (sensitivity 60%, specificity 81%, AUC 75%, p < 0.001). Patients (n = 53/103) with a tunnel coverage ratio of < 70% showed significantly higher tibial tunnel enlargement of 15% in the frontal and sagittal planes. The binary logistic regression showed a significant OR of 6.9 (p = 0.02) for tunnel widening > 10% in the frontal plane if the tunnel coverage ratio was < 70% (sagittal plane: OR 14.7, p = 0.001). Clinical scores did not correlate to tunnel widening. CONCLUSION: Tibial tunnel widening was affected by the tunnel diameter coverage ratio. To minimize the likelihood of disadvantageous tunnel expansion-which is of importance in case of revision surgery-an interference screw should not undercut the tunnel diameter by more than 1 mm.

The relationship between pelvic tilt, frontal, and axial leg alignment in healthy subjects.

INTRODUCTION: The relationship between anterior pelvic tilt and overall sagittal alignment has been well-described previously. However, the relationship between pelvic tilt, frontal, and axial leg alignment remains unclear. The aim of the study was to analyze the relationship between pelvic tilt and frontal and axial leg alignment in healthy subjects. MATERIAL AND METHODS: Thirty healthy subjects (60 legs) without prior surgery underwent standing biplanar long leg radiograph. Pelvic parameters (pelvic tilt, pelvic incidence, sacral slope), hip-knee-ankle angle (HKA), femoral antetorsion and tibial torsion were measured using SterEOS (EOS Imaging) software. EOS was acquired with the feet directing straight anteriorly, which corresponds to a neutral foot progression angle (FPA). The influence of HKA, femoral antetorsion, tibial torsion and gender on pelvic tilt was analyzed in a univariate correlation and multiple regression model. RESULTS: Sixteen female subjects and 14 male subjects with a mean age of 27.1 years ± 10 (range 20-67) were included. HKA, femoral antetorsion, and tibial torsion correlated with anterior pelvic tilt in univariate analysis (all p < 0.05). Anterior pelvic tilt increased 1.1° (95% CI: 0.7 to 1.5) per 1° of knee valgus (p < 0.001) and 0.5° (95% CI: 0.3 to 0.7) per 1° of external tibial torsion (p < 0.001). Overall, linear regression model fit explained 39% of variance in pelvic tilt by the HKA, femoral antetorsion and tibial torsion (R2 = 0.385; p < 0.001). CONCLUSION: Valgus alignment and increasing tibial torsion demonstrated a weak correlation with an increase in anterior pelvic tilt in healthy subjects when placing their feet anteriorly. The relationship between frontal, axial leg alignment and pelvic tilt needs to be considered in patients with multiple joint disorders at the hip, knee and spine. Alteration of the frontal, or rotational profile after realignment surgery or by implant positioning might influence the pelvic tilt when the FPA is kept constant.

No relevant mechanical leg axis deviation in the frontal and sagittal planes is to be expected after subtrochanteric or supracondylar femoral rotational or derotational osteotomy.

PURPOSE: The purpose of this study was to investigate if one level of corrective femoral osteotomy (subtrochanteric or supracondylar) bears an increased risk of unintentional implications on frontal and sagittal plane alignment in a simulated clinical setting. METHODS: Out of 100 cadaveric femora, 23 three-dimensional (3-D) surface models with femoral antetorsion (femAT) deformities (> 22° or < 2°) were investigated, and femAT normalized to 12° with single plane rotational osteotomies, perpendicular to the mechanical axis of the femur. Change of the frontal and sagittal plane alignment was expressed by the mechanical lateral distal femoral angle (mLDFA) and the posterior distal femoral angle (PDFA), respectively. The influence of morphologic factors of the femur [centrum-collum-diaphyseal (CCD) angle and antecurvatum radius (ACR)] were assessed. Furthermore, position changes of the lesser (LT) and greater trochanters (GT) in the frontal and sagittal plane compared to the hip centre were investigated. RESULTS: Mean femoral derotation of the high-antetorsion group (n = 6) was 12.3° (range 10-17°). In the frontal plane, mLDFA changed a mean of 0.1° (- 0.06 to 0.3°) (n.s.) and - 0.3° (- 0.5 to - 0.1) (p = 0.03) after subtrochanteric and supracondylar osteotomy, respectively. In the sagittal plane, PDFA changed a mean of 1° (0.7 to 1.1) (p = 0.03) and 0.3° (0.1 to 0.7) (p = 0.03), respectively. The low-antetorsion group (n = 17) was rotated by a mean of 13.8° (10°-23°). mLDFA changed a mean of - 0.2° (- 0.5° to 0.2°) (p < 0.006) and 0.2° (0-0.5°) (p < 0.001) after subtrochanteric and supracondylar osteotomy, respectively. PDFA changed a mean of 1° (- 2.3 to 1.3) (p < 0.01) and 0.5° (- 1.9 to 0.3) (p < 0.01), respectively. The amount of femAT correction was associated with increased postoperative deviation of the mechanical leg axis (p < 0.01). Using multiple regression analysis, no other morphological factors were found to influence mLDFA or PDFA. Internal rotational osteotomies decreased the ischial-lesser trochanteric space by < 5 mm in both the frontal and sagittal plane (p < 0.001). CONCLUSIONS: In case of femAT correction of ≤ 20°, neither subtrochanteric nor supracondylar femoral derotational or rotational osteotomies have a clinically relevant impact on frontal or sagittal leg alignment. A relevant deviation in the sagittal (but not frontal plane) might occur in case of a > 25° subtrochanteric femAT correction. LEVEL OF EVIDENCE: IV.