RESUMO
Water pollutants such as heavy metal ions, pesticides, and dyes pose a worldwide issue. Their presence in water resources interferes with the normal growth mechanisms of living beings and causes long or short-term diseases. For this reason, research continuously tends to develop innovative, selective, and efficient processes or technologies to detect and remove pollutants from water. This review provides an up-to-date overview on metal nanoparticles loaded in polymeric matrices, such as hydrogels and membranes, and employed as optical sensors and as removing materials for water pollutants. The synthetic pathways of nanomaterials loading into polymeric matrices have been analyzed, particularly focusing on noble metal nanoparticles, noble metal nanoclusters, and metal oxide nanoparticles. Moreover, the sensing properties of modified matrices towards water pollutants have been discussed in addition to the interaction mechanisms between the sensors and the toxic compounds. The last part of the review has been devoted to illustrating the separation mechanism and removal performance of membranes loaded with nanomaterials in the treatment and purification of water streams from different contaminants (heavy metals, dyes and pesticides).
RESUMO
A microporous carboxylate metal-organic framework MIL-100 Fe was prepared as submicron particles by microwave-assisted hydrothermal synthesis (Fe-MOF-MW). This product was explored, for the first time, for the preparation of polylactic acid (PLA) mixed matrix membranes. The produced MOF was characterised by powder X-ray diffraction (PXRD), environmental scanning electron microscopy (ESEM) as well as by thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. The effect of different Fe-MOF-MW concentrations (0.1 and 0.5 wt%) on the membrane properties and performance were evaluated. These membranes were used in the pervaporation process for the separation of methanol/methyl tert-butyl-ether mixtures at the azeotropic point. The influence of the feed temperature and vacuum pressure on the membrane performance was evaluated and the results were compared with PLA pristine membranes. Moreover, the produced membranes have been characterised in terms of morphology, MOF dispersion in the polymeric membrane matrix, wettability, thickness, mechanical resistance and swelling propensity. The presence of Fe-MOF-MW was found to have a beneficial effect in improving the selectivity of mixed matrix membranes towards methanol at both concentrations. The highest selectivity was obtained for the PLA membranes embedded with 0.5 wt% of Fe-MOF-MW and tested at the temperature of 25 °C and vacuum pressure of 0.09 mbar.
RESUMO
Electrospinning is an emerging technique for the preparation of electrospun fiber membranes (ENMs), and a very promising one on the basis of the high-yield and the scalability of the process according to a process intensification strategy. Most of the research reported in the literature has been focused on the preparation of poly (vinylidene fluoride) (PVDF) ENMs by using N,N- dimethylformamide (DMF) as a solvent, which is considered a mutagenic and cancerogenic substance. Hence, the possibility of using alternative solvents represents an interesting approach to investigate. In this work, we explored the use of dimethyl sulfoxide (DMSO) as a low toxicity solvent in a mixture with acetone for the preparation of PVDF-ENMs. As a first step, a solubility study of the polymer, PVDF 6012 Solef®, in several DMSO/acetone mixtures was carried out, and then, different operating conditions (e.g., applied voltage and needle to collector plate distance) for the successful electrospinning of the ENMs were evaluated. The study provided evidence of the crucial role of solution conductivity in the electrospinning phase and the thermal post-treatment. The prepared ENMs were characterized by evaluating the morphology (by SEM), pore-size, porosity, surface properties, and performance in terms of water permeability. The obtained results showed the possibility of producing ENMs in a more sustainable way, with a pore size in the range of 0.2-0.8 µm, high porosity (above 80%), and water flux in the range of 11.000-38.000 L/m2·h·bar.
RESUMO
Polyvinylidenefluoride (PVDF) hollow fiber membranes prepared in laboratory through the inversion phase method were characterized and used to clarify an aqueous extract from red wine lees. Steady-state permeate fluxes of 53 kg/m2h were obtained in the treatment of the aqueous extract in selected operating conditions. Suspended solids were completely retained by the hollow fiber membranes while bioactive compounds, including polyphenols, anthocyanins, and resveratrol were recovered in the permeate stream. The clarified stream was then fractionated by nanofiltration (NF). Three different commercial membranes, in flat-sheet configuration (NP010 and NP030 from Microdyn-Nadir, MPF36 from Koch Membrane Systems), were selected and tested for their productivity and selectivity towards sugars and bioactive compounds, including phenolic compounds, anthocyanins, and resveratrol. All selected membranes showed high retention towards anthocyanins (higher than 93%). Therefore, they were considered suitable to concentrate anthocyanins from clarified wine lees extracts at low temperature. On the other hand, NF permeate streams resulted enriched in phenolic compounds and resveratrol. Among the selected membranes, the MPF36 exhibited the lowest retention towards resveratrol (10%) and polyphenols (26.3%) and the best separation factor between these compounds and anthocyanins.
RESUMO
The possibility of replacing traditional toxic solvents normally employed during the preparation of polymeric membranes with greener alternatives represents a great challenge for safeguarding the human health and protecting the environment. In this work, an improved and pleasant-smelling version of dimethylsulfoxide (DMSO), i.e., DMSO EVOL™, was used as "greener solvent" for the preparation of polyethersulfone (PES) microfiltration (MF) membranes using a combination of non-solvent and vapor-induced (NIPS and VIPS, respectively) phase separation technique for the first time. The effect of two different additives polyvinylpyrrolidone (PVP) and poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (Pluronic®) together with polyethylene glycol (PEG) on membrane properties and performances has been also evaluated. The membranes were characterized in terms of morphology, mechanical resistance, pore size, and water permeability. The obtained results show that DMSO EVOL™ is able to replace 1-methyl-2-pyrrolidone (NMP), which is a more toxic solvent normally used for the preparation of PES membranes. Furthermore, it was possible to tune the produced membranes in the range of MF (0.1-0.6 µm).