A pathogenic role for brain-derived neurotrophic factor (BDNF) in fibrous dysplasia of bone.

Brain derived neurotrophic factor (BDNF) is a neurotrophin, expressed in the central nervous system and in peripheral tissues, that is regulated by the Gsα/cAMP pathway. In bone, it regulates osteogenesis and stimulates RANKL secretion and osteoclast formation in osteolytic tumors such as Multiple Myeloma. Fibrous dysplasia (FD) of bone is a rare genetic disease of the skeleton caused by gain-of-function mutations of the Gsα gene in which RANKL-dependent enhanced bone resorption is a major cause of bone fragility and clinical morbidity. We observed that BDNF transcripts are expressed in human FD lesions. Specifically, immunolocalization studies performed on biopsies obtained from FD patients revealed the expression of BDNF in osteoblasts and, to a lower extent, in the spindle-shaped cells within the fibrous tissue. Therefore, we hypothesized that BDNF can play a role in the pathogenesis of FD by stimulating RANKL secretion and bone resorption. To test this hypothesis, we used the EF1α-GsαR201C mouse model of the human disease (FD mice). Western blot analysis revealed a higher expression of BDNF in bone segments of FD mice compared to WT mice and the immunolabeling pattern within mouse FD lesions was similar to that observed in human FD. Treatment of FD mice with a monoclonal antibody against BDNF reduced the fibrous tissue along with the number of osteoclasts and osteoblasts within femoral lesions. These results reveal BDNF as a new player in the pathogenesis of FD and a potential molecular mechanism by which osteoclastogenesis may be nourished within FD bone lesions. They also suggest that BDNF inhibition may be a new approach to reduce abnormal bone remodeling in FD.

Higher rates of fully preserved posterior cruciate ligament in total knee arthroplasty using a double tibial cut: a prospective randomized controlled trial.

PURPOSE: In cruciate retaining total knee arthroplasty, posterior cruciate ligament damage may occur during tibial cutting. A prospective randomized study was conducted to investigate whether a novel tibial cutting technique was more effective than the currently used techniques. MATERIALS AND METHODS: Patients undergoing cruciate retaining total knee arthroplasty were recruited in a prospective, randomized, controlled trial. In 25 patients (group 1) the tibial cut was performed using a double tibial cut technique; in 25 (group 2) and 25 (group 3) patients, the bone island and en bloc resection techniques were performed, respectively. Posterior cruciate ligament integrity and femoral rollback were assessed at the end of surgery. The Oxford Knee Score, WOMAC score and range of motion were assessed postoperatively. RESULTS: Posterior cruciate ligament was completely preserved in 92% of patients in group 1 and in 64% in group 2 and 3, respectively (p = 0.03). The Oxford Knee Score and WOMAC scores did not differ between groups (p = 0.4). The mean knee flexion was 126.4°, 121.5° and 123.9° in groups 1, 2 and 3, respectively (p = 0.04). The femoral rollback at 120° flexion was 80.7%, 72.2% and 75.4% in groups 1, 2 and 3, respectively (p = 0.01). CONCLUSIONS: The double cut technique preserves the posterior cruciate ligament at significantly higher rates than the bone island or en bloc resection techniques. Better posterior cruciate ligament preservation may improve the femoral rollback and knee flexion. LEVEL OF EVIDENCE: Prospective randomized controlled trial, Level I.

Morphometric analysis of the lateral column of the distal humerus with an interest on radio-capitellar arthroplasty design. A computed tomography anatomical study on 50 elbows.

PURPOSE: To perform a morphometric analysis of the distal humerus lateral column medullary canal (LCMC). METHODS: Fifty computed tomography(CTs) from 24 males and 26 females were examined. Two observers measured: (1) the capitellum sagittal (RS) and axial (RT) radii of curvature; (2) the sagittal(Sd) and coronal(Cd) diameters of the LCMC in 5 different disto-proximal sites spaced 4 mm apart; (3) the capitellum and LCMC axis offsets on the sagittal (capSO,axSO) and coronal (capCO,axCO) planes; (4) the sagittal (Si) and coronal (Ci) inclination of the LCMC axis. RESULTS: The mean RS and RT were 1.07 cm (SD, 0.11) and 1.30 cm (SD, 0.11), respectively. The mean Sd and Cd values were 1.17 cm (SD, 0.17) and 1.58 cm (SD, 0.24), respectively, with a disto-proximal decrease on both planes. The capSO, capCO, axSO and axCO mean values were 0.76 (SD, 0.21), 1.60 (SD, 0.27), - 0.16 (SD, 0.30) and 0.79 cm (SD, 0.30), respectively. Si and Ci were 70° and 72°, respectively. A strong correlation (r = 0.78) was found between RS and RT and between adjacent levels of Sd and Cd. AxSO and axCO yielded a strong inverse correlation. Male patients showed higher values than female ones in all variables (p < 0.03). The intra-class correlation coefficient (ICC) was always > 0.9. CONCLUSION: The dimensions of the LCMC decrease disto-proximally, with the coronal diameters being greater than the sagittal diameters, resembling a portion of an elliptic torus with an antero-medial concavity. The articular surface of the humeral capitellum is non-spherical, with two strongly correlated radii of curvature. The results of this study may be relevant to the stem design of radiocapitellar arthroplasty.

The iliac stemmed cup in reconstruction of the acetabular defects secondary to tumor resection: a systematic review of literature.

INTRODUCTION: Stemmed acetabular cups are suitable for reconstruction in case of important bone loss. Nevertheless, their use is not so common, because generally judged very invasive and technically difficult to implant. The aim of the present review is to verify the results of their use and to evaluate indications and complications. MATERIALS AND METHODS: Literature research was performed in the main healthcare databases; indications, surgical technique, related complications, functional results and implant survival were valued and analyzed for every selected paper. RESULTS: 13 studies were selected, for a population of 424 patients and 428 hips. The main indication was reconstruction after tumor removal; the primary non-oncologic indication was revision for aseptic loosening. The most frequent complications were aseptic loosening and implant failure (16.2%), followed by deep infection (11.3%) and dislocation (9.8%). The average MSTS score was 65.9%; while data regarding functional results for degenerative cases are quite fragmented. The 5-years implant survival was 73.6%. CONCLUSIONS: Data regarding SAC prostheses are quite rare in the literature; no prospective studies with comparisons with other reconstruction techniques are available so their use is mainly based on the experience of single centers. While data for tumors are more consistent and supported by studies, information on revisions of hip prosthesis implanted for degenerative problems is quite scarce. Preliminary results on the SAC prosthesis as a valid alternative both for tumoral and degenerative revision cases are encouraging. Prospective randomized studies are advocated to value results compared to alternative techniques.

Primary complex total knee arthroplasty with severe varus deformity and large bone defects: mid-term results of a consecutive series treated with primary implants.

INTRODUCTION: In recent years, the use of constrained implants in complex primary TKA has gained popularity since these implants may better and more easily address severe instability present in complex primary cases (CPC). However, the need for a constrained TKA in CPC is controversial. We hypothesized that a standard TKA may be successful in most of CPC and that an intraoperative switching to a constrained device is rarely need even in the presence of severe instability and bone loss. MATERIALS AND METHODS: A consecutive series of 24 CPC (28 knees) were analysed retrospectively. Inclusion criteria were a femoro-tibial angle > 12° and bone defect of grade 2-3 (group 1). Forty-eight patients (52 knees) were analysed as controls (group 2). Patients were followed up clinically and radiographically up to a minimum of 5 years. RESULTS: In group 1, a PS was used in 24 knees and a CR in 4. In no patient, a CCK or RHK was implanted. Bone defect was treated with bone cement plus cortical screws in 15 knees (53.5%), a medial wedge in 8 (28.5%), a medial wedge plus bone grafting with cancellous screws in 5 (17.8%). Metaphyseal sleeve or cone was not used. At the last follow-up, no significant difference was found in the clinical scores between the 2 groups. CONCLUSION: In CPC with marked varus deformity, instability and bone loss, the use of primary TKA is associated with a clinical outcome comparable to standard cases. Ligamentous balancing may be addressed using primary implants and simple cost-effective techniques may be used to manage an extensive bone loss. In most CPC, an intraoperative switching to a constrained device is not necessary.

Correlations Between Radial Head Diameters and Humeral Articular Dimensions: Bilateral MRI Morphometric Analysis on 39 Healthy Subjects.

PURPOSE: Choosing the correct size of head component in radial head arthroplasty is often challenging, particularly in comminuted fractures, deformities, and revision surgery. The main aim of this study was to investigate possible correlations between radial head diameters and the morphometric parameters of the articular distal humerus in order to find mathematical equations that may be used to infer radial head dimensions indirectly. METHODS: We performed bilateral elbow magnetic resonance imaging on 39 healthy young subjects, comprising 19 women and 20 men, with a mean age of 28 years (range, 21-32 years). The following measurements, which included cartilage thickness, were calculated on the axial plane: maximum (Dmax) and minimum (Dmin) radial head diameters, capitellum width, capitellum to lateral trochlear ridge width (CAP-TROCHridge), humeral articular width (HUMwidth), capitellum radius of curvature, and lateral, medial, and total trochlear width. The anteroposterior diameters of the capitellum, trochlear sulci, and lateral and medial trochlear ridges were measured on the sagittal plane. RESULTS: CAP-TROCHridge and HUMwidth were found to be the parameters most strongly correlated with the radial head diameters. Four mathematical equations that allowed Dmax and Dmin to be calculated with an average residual error less than 1 mm, were obtained. The intraclass coefficient was greater than 0.95 for all the measurements. CONCLUSIONS: Radial head diameters can be accurately inferred from 2 humeral dimensions by magnetic resonance imaging. The HUMwidth, which is not influenced by cartilage thickness, may be useful for planning with preoperative imaging because it can also be calculated by computed tomography scan, whereas CAP-TROCHridge, which is influenced by cartilage thickness, might be useful for direct intraoperative measurement. TYPE OF STUDY/LEVEL OF EVIDENCE: Diagnostic III.

Plain films are not accurate in planning internal fixation in vancouver type B1 periprosthetic femoral fractures and in distinguishing between subtypes B1 And B2.

BACKGROUND: While few studies analysed the diagnostic validity of preoperative radiographs in distinguishing between Vancouver type B1 and B2 periprosthetic femoral fractures (PFFs), no investigation has been conducted to assess the degree of diagnostic validity of preoperative radiographs in identifying the fracture course and planning the most appropriate treatment. We analysed the diagnostic validity of radiographs in detecting the fracture course and stem stability in Vancouver type B PFFs. METHODS: Vancouver type B PFFs with different fracture courses were randomly performed in 36 dried cadaveric femurs in which a femoral broach had previously been implanted. Radiographic images, taken in the coronal and sagittal views, were analysed by 5 orthopaedic surgeons and 2 radiologists who were asked to reproduce the fracture course and to evaluate stem stability. A scoring system was used to determine the injured femoral cortex correctly identified by the examiners. RESULTS: The identification of the fracture course was scored as poor in 52.4% and 56.%, fair in 23% and 23.4% and good in 24.6% and 19.8%, The identification of the fracture course in the coronal and axial vies radiographs was scored in coronal and axial view radiographs respectively. There was no significant difference in the average score obtained by senior and young examiners. In the coronal plane, the fracture course was poorly identified by all examiners in 11 (30.5%) femurs and by 5 or more examiners in 17 (47%). The fracture course was correctly identified by 5 or more examiners in 8 femurs (22%). A vertical fracture involving an emidiaphysis was found in 8 of the 11 femurs in which the PFF was poorly diagnosed by all examiners. Stem instability was correctly diagnosed in 45% of cases. CONCLUSIONS: In type B PFFs preoperative radiographs show a reduced diagnostic validity in identifying the fracture course and, hence, in planning a correct treatment. Potentially unstable vertical fractures involving an emidiaphysis are likely to be poorly diagnosed since most of the fracture course is hidden by the femoral stem. In cementless stems the diagnostic validity of radiographs in diagnosing between Vancouver type B1 and B2 seems to be lower than that reported for cemented stems.

Revisiting the tibial crest as reference for the mechanical alignment of the tibial component in total knee arthroplasty: a cadaveric study on Caucasian tibiae.

PURPOSE: The accuracy of the tibial crest (TC) in guiding the mechanical alignment of the tibial component in total knee arthroplasty (TKA) has been investigated in a few studies on Asian patients. No study analyzed the anatomical variants of the TC. We analyzed the morphological types of the TC in cadaveric tibiae of Caucasian subjects and assessed whether the TC may be considered an accurate guide for the mechanical alignment of the tibial component in TKA. METHODS: The TC and mechanical axis (MA) were identified in 86 dried cadaveric tibiae by placing metal landmarks along the TC course and a guidewire overlapping the MA. Coronal view radiographs were taken in different positions of tibial axial rotation, and the relationships between the TC and MA were analyzed. RESULTS: The TC showed three different patterns, comprising a curved, mixed and straight course in 47 (54.6%), 21 (24.4%) and 18 (20.9%) tibiae, respectively. When a curved course was found, the TC intersected the MA at proximal and distal points located, on average 22.4% and 63.3% along the tibial length, respectively. When a straight course was found, the mean angle between the TC and MA was 2.9°. In 35% of the cases, the two axes differed by more than 3°. CONCLUSION: The TC of Caucasian subjects exhibits a marked variability in its course and relationship with the MA. Unlike the TC in Asian subjects, the TC of Caucasians cannot be considered an accurate anatomical reference to guide the coronal alignment of the tibial component in TKA.

Chronic complex persistent elbow instability: a consecutive and prospective case series and review of recent literature.

BACKGROUND: Chronic complex persistent elbow instability (CCPEI) is a condition that even expert elbow surgeons find challenging to treat. The results of the few studies that have dealt with the treatment of this condition are conflicting. We describe the surgical results of a consecutive prospective series of patients with CCPEI and provide a review of the recent literature. METHODS: We assessed 21 patients with previous failed surgical or conservative treatment, with a terrible-triad injury in 13, Monteggia-like lesion in 6, humeral shear fracture-dislocation in 1, and radial head fracture-dislocation in 1. Overall, 21 open débridement procedures, 15 ulnar nerve transpositions, 6 ulnar in situ neurolysis procedures, 7 total elbow arthroplasties, 8 radial head arthroplasties, 1 radial head resection with humeroradial anconeus interpositional arthroplasty, 4 coronoid graft reconstructions, 14 ligament retensioning procedures, 3 ulnar nonunion treatments, and 2 ulnar osteotomies were performed. Two dynamic external fixators were applied. The Mayo Elbow Performance Score, quick Disabilities of the Arm, Shoulder and Hand score, and modified American Shoulder and Elbow Surgeons score were used preoperatively and postoperatively. RESULTS: The mean follow-up period was 29.4 months. A significant improvement was found between preoperative and postoperative clinical scores and range-of-motion values. The reintervention and major complication rates were 19% and 23%, respectively. Arthritic evolution was observed in 71% of the cases. CONCLUSIONS: CCPEI is a challenging condition with an uncertain prognosis. The variability in patients' pathoanatomic conditions requires customized surgical treatment aimed at elbow stabilizer reconstruction when the ulnohumeral joint is preserved or aimed at joint replacement in case of severe articular degeneration. The time interval between the initial trauma and index surgical procedure significantly affects the feasibility of reconstructive procedures.

Changes in gene expression in human skeletal stem cells transduced with constitutively active Gsα correlates with hallmark histopathological changes seen in fibrous dysplastic bone.

Fibrous dysplasia (FD) of bone is a complex disease of the skeleton caused by dominant activating mutations of the GNAS locus encoding for the α subunit of the G protein-coupled receptor complex (Gsα). The mutation involves a substitution of arginine at position 201 by histidine or cysteine (GsαR201H or R201C), which leads to overproduction of cAMP. Several signaling pathways are implicated downstream of excess cAMP in the manifestation of disease. However, the pathogenesis of FD remains largely unknown. The overall FD phenotype can be attributed to alterations of skeletal stem/progenitor cells which normally develop into osteogenic or adipogenic cells (in cis), and are also known to provide support to angiogenesis, hematopoiesis, and osteoclastogenesis (in trans). In order to dissect the molecular pathways rooted in skeletal stem/progenitor cells by FD mutations, we engineered human skeletal stem/progenitor cells with the GsαR201C mutation and performed transcriptomic analysis. Our data suggest that this FD mutation profoundly alters the properties of skeletal stem/progenitor cells by pushing them towards formation of disorganized bone with a concomitant alteration of adipogenic differentiation. In addition, the mutation creates an altered in trans environment that induces neovascularization, cytokine/chemokine changes and osteoclastogenesis. In silico comparison of our data with the signature of FD craniofacial samples highlighted common traits, such as the upregulation of ADAM (A Disintegrin and Metalloprotease) proteins and other matrix-related factors, and of PDE7B (Phosphodiesterase 7B), which can be considered as a buffering process, activated to compensate for excess cAMP. We also observed high levels of CEBPs (CCAAT-Enhancer Binding Proteins) in both data sets, factors related to browning of white fat. This is the first analysis of the reaction of human skeletal stem/progenitor cells to the introduction of the FD mutation and we believe it provides a useful background for further studies on the molecular basis of the disease and for the identification of novel potential therapeutic targets.

Post-traumatic proximal radioulnar synostosis: results of surgical treatment and review of the literature.

BACKGROUND: Post-traumatic proximal radioulnar synostosis is a very rare and disabling condition whose surgical treatment has traditionally been viewed with pessimism. The results of the few case series in the literature are conflicting. Our aims were (1) to describe the clinical results of a case series treated surgically by a single elbow surgeon and (2) to review the literature. METHODS: Twelve patients were evaluated. Preoperative radiographs and computed tomography scans were performed. According to the Viola and Hastings classification, there was 1 case of type IC synostosis; 3, type IIA; 2, type IIIA; and 8, type IIIB. Two patients had a double synostosis. The synostosis was excised in 10 cases; in addition, radial head excision, radial head arthroplasty, and proximal radial diaphyseal resection were performed in 1, 3, and 2 cases, respectively. The Mayo Elbow Performance Score, modified American Shoulder and Elbow Surgeons score, and QuickDASH (short version of Disabilities of the Arm, Shoulder and Hand questionnaire) score were used for the preoperative and postoperative evaluation. The nonparametric Wilcoxon signed rank test was used for the statistical analysis. RESULTS: The mean follow-up period was 20.5 months. The final mean extension-flexion and pronation-supination arcs were 116° and 123°, respectively. Significant improvements were found in the Mayo Elbow Performance Score (P = .005), modified American Shoulder and Elbow Surgeons score (P = .012), and QuickDASH score (P = .002), with mean values of 24, 28, and 17, respectively. One synostosis recurrence and one late disassembly of the radial head arthroplasty were observed. CONCLUSIONS: Post-traumatic proximal radioulnar synostosis surgery is effective, but careful preoperative planning based on the pathoanatomic characteristics of each type of synostosis and associated lesions is mandatory. Synostosis excision is performed in most cases, whereas additional surgical procedures should be considered in selected cases.

Midterm results of radiocapitellar arthroplasty of the elbow: a multicentre prospective study on two different implants.

AIMS: The aim of this study was to analyze the results of two radiocapitellar prostheses in a large case series followed prospectively, with medium-term follow-up. PATIENTS AND METHODS: A total of 31 patients with a mean age of 54 years (27 to 73) were analyzed; nine had primary osteoarthritis (OA) and 17 had post-traumatic OA, three had capitellar osteonecrosis, and two had a fracture. Overall, 17 Lateral Resurfacing Elbow (LRE) and 14 Uni-Elbow Radio-Capitellum Implant (UNI-E) arthroplasties were performed. Pre- and postoperative assessment involved the Mayo Elbow Performance Score (MEPS), the Quick Disabilities of the Arm, Shoulder and Hand (Q-DASH) score, and the modified American Shoulder Elbow Surgeons (m-ASES) score. RESULTS: The mean follow-up was 6.8 years (3.8 to 11.5). The mean MEPS, m-ASES, and Q-DASH scores improved significantly by 50 (p < 0.001), 55 (p < 0.001), and 54 points (p < 0.001), respectively, with no differences being detected between the implants. Preoperative pronation and supination were worse in patients in whom the UNI-E was used. Two patients with the UNI-E implant had asymptomatic evidence of gross loosening. CONCLUSION: Radiocapitellar arthroplasty yielded a significant improvement in elbow function at a mean follow-up of 6.8 years, with a high implant survival rate when the LRE was used in patients with primary or post-traumatic OA, without radial head deformity, and when the UNI-E was used in patients in whom radial head excision was indicated. Cite this article: Bone Joint J 2019;101-B:1362-1369.

Complex humeral head fractures treated with blocked threaded wires: maintenance of the reduction and clinical results with two different fixation constructs.

BACKGROUND: Locking plates are the gold standard for treatment of 3-part humeral head fractures, although major complications range from 9% to 36%. Percutaneous techniques may allow vascular supply preservation, maintenance of fracture hematoma, scarce blood loss. Many configurations with Kirschner wires can be performed, generating confusion on result interpretation. We studied the correlation between system configuration, stability, and clinical results in patients with 3-part humeral head fractures treated with the same fixation system but with 2 different biomechanical constructs. MATERIALS AND METHODS: There were 52 consecutive patients (19 men, 33 women; mean age, 63.1 [standard deviation, 5.6] years; range, 48-82 years) with Hertel 7 humeral head fractures. Two fixation constructs composed of 3 couples (construct A) or 4 couples (construct B) of blocked threaded wires were used in 17 and 35 patients, respectively. At the final follow-up, the individual relative Constant Score (irCS) and visual analog scale were measured. Radiographic evaluation according to the Bahr criteria was performed. Statistical analysis was performed. RESULTS: The mean follow-up was 22 months. The mean irCS at the final follow-up was 89.7%. The mean irCS in patients treated with construct A and construct B was 86% and 93%, respectively (P = .043). One nonunion and 2 superficial infections occurred (6%). The postoperative reduction was excellent in 97% of patients and remained excellent in 89%. The mean postoperative neck shaft angle was 135.0° (construct A: 134.7°; construct B: 135.1°), and the final neck shaft angle was 132.9° (construct A: 131.3°; construct B: 133.8°; P = .047). CONCLUSIONS: The functional and radiologic outcomes obtained with percutaneous fixation or locking plates are similar; however, the percentage of major complications after percutaneous treatment is lower. Results of percutaneous fixation depend on the biomechanical construct.

The native coronal orientation of tibial plateaus may limit the indications to perform a kinematic aligned total knee arthroplasty.

PURPOSE: To investigate the coronal alignment of tibial plateaus in normal and osteoarthritic knees and to simulate the effects of a tibial cut performed in total knee arthroplasty (TKA) using a kinematic alignment technique with standard instrumentation. METHODS: The coronal alignment of tibial plateaus was measured in three groups including group 1 (reference group), 50 cadaveric tibiae showing no evidence of degenerative changes of tibial plateaus; group 2, 49 patients who underwent MR of the knee, showing no or mild degenerative changes of the knee joint and, group 3, 54 patients with knee osteoarthritis who underwent computer-assisted total knee arthroplasty. RESULTS: The coronal alignment of tibial plateaus averaged 2.4° with no significant differences between groups. The mean coronal orientation of tibial plateaus was 3° ± 2° in men and 1.6° ± 2° in women (p = 0.03). A coronal alignment of tibial plateaus of 3° or more was found in 69 cases (45%) and 5° or more in 23 (14.7%). The simulation of a tibial cut performed with an error of 3° in varus in 15% of the subjects showing a native coronal orientation of tibial plateaus of 3° or more, led to a final tibial cut greater 6° in 13.7% of cases. CONCLUSIONS: A coronal alignment of tibial plateaus of 3° or more in varus was found in near half of normal subjects and osteoarthritic patients. A preoperative measurement of the coronal alignment of tibial plateaus is advisable in any patients scheduled for kinematic aligned TKA. As errors in the alignment of the tibial component of 3° or more may occur using standard instrumentations, the results of this study raise questions on performing a kinematic aligned TKA with standard instrumentations. LEVEL OF EVIDENCE: IV.

Cartilage thickness of distal humerus and its relationships with bone dimensions: magnetic resonance imaging bilateral study in healthy elbows.

BACKGROUND: Little is known about the cartilage thickness of the distal humerus and how it affects the shape of the articular surface. Our aims were to assess cartilage thickness and to determine the extent to which it affects the true profile of the distal humerus. METHODS: We assessed 78 healthy elbows (39 subjects, 19 women and 20 men) with a mean age of 28 years (range, 21-32 years). Cartilage thickness was measured by use of high-definition magnetic resonance imaging scans at 19 different points of the articular surface, 13 on the trochlea and 6 on the capitellum, on the axial and coronal views. Bone diameters at the medial and lateral trochlear ridges, trochlear groove, and capitellum, as well as the articular surface width, were measured. Subject height was used as an indirect measurement of humerus length. Pearson correlation coefficients and the Student t test were used. RESULTS: Cartilage thickness showed a significant variation (range, 0.4-1.8 mm) independent of sex and side. It appeared thinner at the medial and lateral edges, whereas it increased at the level of the trochleocapitellar and trochlear grooves, the lateral trochlear ridges, and the center of the capitellum. The mean bone diameters of the medial ridge, lateral ridge, trochlear groove, and capitellum measured 25.1 mm, 21 mm, 16.9 mm, and 19.6 mm, respectively. The mean width of the articular surface was 42.9 mm (range, 35.8-50.2 mm). No significant correlation was found between cartilage thickness and bone dimensions. CONCLUSION: Cartilage thickness is not uniform and modifies the morphologic shape and diameters of the humeral articular surface. These findings may be relevant to anatomic prosthesis design.

Infective complications in tumour endoprostheses implanted after pathological fracture of the limbs.

INTRODUCTION: Pathological fractures represent an adverse prognostic factor in primary and metastatic bone tumours. The purpose of this study was to evaluate the results of tumour silver-coated prosthesis implanted after pathological fractures. MATERIALS AND METHODS: A retrospective analysis was conducted on 30 patients with pathological limb fracture after primary or metastatic bone tumours treated by the same surgeon with wide margin resection and tumour prosthesis implant between 2005 and 2015. Silver-coated prostheses were implanted in 17 patients and uncoated prostheses were implanted in 13 patients. The primary outcome of the study was to evaluate the infective risk, the secondary outcomes were survival and functional level (visual analogue scale [VAS], 36-Item Short Form Health Survey [SF 36], and Musculoskeletal Tumour Society [MSTS] score) obtained at the longest follow-up available. A multivariate analysis was performed considering age, sex, tumour histology, grading and location, resection size, concomitant radiotherapy/chemotherapy, use of mesh for soft tissue reconstruction and local complications (dislocation, relapse, implant breakage). Scanning electron microscopy (SEM) analysis of explanted prosthesis was performed to study the residual silver-coating. RESULTS: The average age of patients in the study was 56.2 years (range 12-78 years). Silver-coated prostheses were implanted in 56.7% of patients, and uncoated tumour prostheses were used in the remaining 43.3%. The mean follow-up was 40.7 months. A total of 26.7% of patients died at a median time of 28.6 months after surgery. The overall rate of complications was 30%, with 16.7% due to infection. A total of 11.8% of the patients treated with silver-coated implants developed infection compared with 23.1% of the patients treated with uncoated tumour prostheses. There were no cases of early infection in the silver-coated prosthesis group, whereas early infection occurred in 66.7% of patients in the uncoated prosthesis group. All the functional outcomes were significantly improved after surgery. None of the other parameters analysed can be considered a significant negative prognostic factor for infection. The SEM analyses showed severe silver-coating degradation 2 years after first implant. No case of silver toxicity was demonstrated. DISCUSSION: There are few papers in the literature about infective complications in tumour prosthesis after pathological fracture. Silver-coated implants showed a protective action against early infection. Late infection rate was similar between the groups, thereby indicating a reduction of antimicrobial activity for the silver-coating over time. CONCLUSIONS: Silver-coated prostheses are a protective factor against early infections in limb salvage surgery after pathological fractures, so may represent the first-choice of implants in this type of surgery.

No Identical "Mesenchymal Stem Cells" at Different Times and Sites: Human Committed Progenitors of Distinct Origin and Differentiation Potential Are Incorporated as Adventitial Cells in Microvessels.

A widely shared view reads that mesenchymal stem/stromal cells ("MSCs") are ubiquitous in human connective tissues, can be defined by a common in vitro phenotype, share a skeletogenic potential as assessed by in vitro differentiation assays, and coincide with ubiquitous pericytes. Using stringent in vivo differentiation assays and transcriptome analysis, we show that human cell populations from different anatomical sources, regarded as "MSCs" based on these criteria and assumptions, actually differ widely in their transcriptomic signature and in vivo differentiation potential. In contrast, they share the capacity to guide the assembly of functional microvessels in vivo, regardless of their anatomical source, or in situ identity as perivascular or circulating cells. This analysis reveals that muscle pericytes, which are not spontaneously osteochondrogenic as previously claimed, may indeed coincide with an ectopic perivascular subset of committed myogenic cells similar to satellite cells. Cord blood-derived stromal cells, on the other hand, display the unique capacity to form cartilage in vivo spontaneously, in addition to an assayable osteogenic capacity. These data suggest the need to revise current misconceptions on the origin and function of so-called "MSCs," with important applicative implications. The data also support the view that rather than a uniform class of "MSCs," different mesoderm derivatives include distinct classes of tissue-specific committed progenitors, possibly of different developmental origin.

Association between alcohol consumption and rotator cuff tear.

BACKGROUND AND PURPOSE: Long-term alcohol intake is associated with various negative effects on capillary microcirculation and tissue perfusion. We hypothesized that alcohol consumption might be a risk factor for both the occurrence and the severity of rotator cuff tears (RCTs). PATIENTS AND METHODS: A case-control study was performed. We studied 249 consecutive patients (139 men and 110 women; mean age 64 (54-78) years) who underwent arthroscopic rotator cuff repair. Tear size was determined intraoperatively. The control group had 356 subjects (186 men and 170 women; mean age 66 (58-82) years) with no RCT. All participants were questioned about their alcohol intake. Participants were divided into: (1) non-drinkers if they consumed less than 0.01 g of ethanol per day, and (2) moderate drinkers and (3) excessive drinkers if women (men) consumed > 24 g (36 g) per day for at least 2 years. RESULTS: Total alcohol consumption, wine consumption, and duration of alcohol intake were higher in both men and women with RCT than in both men and women in the control group. Excessive alcohol consumption was found to be a risk factor for the occurrence of RCT in both sexes (men: OR = 1.7, 95% CI: 1.2-3.9; women: OR = 1.9, 95% CI: 0.94-4.1). Massive tears were associated with a higher intake of alcohol (especially wine) than smaller lesions. INTERPRETATION: Long-term alcohol intake is a significant risk factor for the occurrence and severity of rotator cuff tear in both sexes.

Contribution of cartilage to size and shape of radial head circumference: magnetic resonance imaging analysis of 78 elbows.

BACKGROUND: The aims of our study were to quantify cartilage thickness at the minimum and maximum diameters of the radial head circumference and to investigate its influence on the size and shape of the proximal radius. METHODS: We analyzed high-definition magnetic resonance imaging scans of 78 healthy elbows in 19 men and 20 women, with a mean age of 28 (21-32) years. All measurements were estimated in the axial plane just distal to the fovea radialis. Maximum and minimum bone diameters, maximum and minimum total diameters (including cartilage thickness), and cartilage thickness were calculated. Cartilage thickness was measured at 4 different points: (1) at the articular side of the maximum diameter (point A), (2) at the nonarticular side of the maximum diameter (point B), (3) at the medial side of the minimum diameter (point C), and (4) at the lateral side of the minimum diameter (point D). Pearson correlation and t test were used for the statistical analysis. RESULTS: Mean maximum and minimum bone diameters and maximum and minimum total diameters were 22.2, 21.5, 24.0, and 23.2 mm, respectively. All differences between diameters were statistically significant. Mean cartilage thickness at points A, C, and D was 1.7, 0.8, and 0.8 mm, respectively. No measurable cartilage thickness was found at point B. No significant correlation was found between bone diameters and cartilage thickness. CONCLUSIONS: Cartilage surface significantly increases and modifies the size and shape of the radial head. The observation that cartilage thickness varies between subjects and does not correlate with bone parameters suggests that the diameters of the radial head cannot be inferred from indirect measurements of dry bones or radiographs.

The ulnar greater sigmoid notch "coverage angle": bone and cartilage contribution. Magnetic resonance imaging anatomic study on 78 elbows.

BACKGROUND: To study the degree of coverage provided by the greater sigmoid notch (GSN) to the humeral trochlea, as well as the contribution of the olecranon and coronoid process cartilage tips to this angle, and its variations. METHODS: We recruited 39 healthy volunteers, comprising 19 women and 20 men, with a mean age of 28 years (range, 21-32 years). High-definition magnetic resonance images were obtained for the right and left elbows. Four angles were measured on the sagittal plane passing through the coronoid and olecranon tips: angle A, identified by 2 lines from the trochlea center to the olecranon bone-cartilage junction and olecranon cartilage tip; angle B, identified by 2 lines from the trochlea center to the olecranon and coronoid bone-cartilage junction; angle C, identified by 2 lines from the trochlea center to the coronoid bone-cartilage junction and coronoid cartilage tip; and GSN coverage angle (GSN-ca), defined as the sum of angles A, B, and C. Pearson correlation tests, t tests, and intraclass correlation coefficients were used for statistical analyses. RESULTS: The mean angle A, angle B, and angle C values were 6° (range, 2°-12°), 182° (range, 153°-204°), and 9° (range, 2°-16°), respectively. No correlations were found between these 3 angles. The mean GSN-ca was 198° (range, 167°-222°), and the GSN-ca was less than 180° in 8% of the cases. No significant differences emerged for side or gender or for total length of the ulna. CONCLUSION: The GSN showed significantly different shapes on the sagittal plane that we defined as closed type when the GSN-ca was greater than 180° (92%) and as open type when the GSA-ca was less than 180° (8%). The cartilage tip contribution varied and was not correlated with that of bone.