Investigating the potential of monocyclic B9N9 and C18 rings for the electrochemical sensing, and adsorption of carbazole-based anti-cancer drug derivatives: DFT-based first-principle study.

CONTEXT: For the first time, the use of monocyclic rings C18 and B9N9 as sensors for the sensing of carbazole-based anti-cancer drugs, such as tetrahydrocarbazole (THC), mukonal (MKN), murrayanine (MRY), and ellipticine (EPT), is described using DFT simulations and computational characterization. The geometries, electronic properties, stability studies, sensitivity, and adsorption capabilities of C18 and B9N9 counterparts towards the selected compounds confirm that the analytes interact through active cavities of the C18 and B9N9 rings of the complexes. METHODS: Based on the interaction energies, the sensitivity of surfaces towards EPT, MKN, MRY, and THC analytes is observed. The interaction energy of EPT@B9N9, MKN@B9N9, MRY@B9N9, and THC@B9N9 complexes are observed - 20.40, - 19.49, - 20.07, and - 18.27 kcal/mol respectively which is more exothermic than EPT@C18, MKN@C18, MRY@C18, and THC@C18 complexes are - 16.37, - 13.97, - 13.96, and - 11.39 kcal/mol respectively. According to findings from the quantum theory of atoms in molecules (QTAIM) and the reduced density gradient (RDG), dispersion forces play a significant role in maintaining the stability of these complexes. The electronic properties including FMOs, density of states (DOS), natural bond orbitals (NBO), charge transfer, and absorption studies are carried out. In comparison of B9N9 and C18, the analyte recovery time for C18 is much shorter (9.91 × 10-11 for THC@C18) than that for B9N9 shorter recovery time value of 3.75 × 10-9 for EPT@B9N9. These results suggest that our reported sensors B9N9 and C18 make it faster to detect adsorbed molecules at room temperature. The sensor response is more prominent in B9N9 due to its fine energy gap and high adsorption energy. Consequently, it is possible to think of these monocyclic systems as a potential material for sensor applications.

Exploring the Sensing Potential of g-C3N4 versus Li/g-C3N4 Nanoflakes toward Hazardous Organic Volatiles: A DFT Simulation Study.

Ab initio calculations were performed to determine the sensing behavior of g-C3N4 and Li metal-doped g-C3N4 (Li/g-C3N4) quantum dots toward toxic compounds acetamide (AA), benzamide (BA), and their thio-analogues, namely, thioacetamide (TAA) and thiobenzamide (TAA). For optimization and interaction energies, the ωB97XD/6-31G(d,p) level of theory was used. Interaction energies (Eint) illustrate the high thermodynamic stabilities of the designed complexes due to the presence of the noncovalent interactions. The presence of electrostatic forces in some complexes is also observed. The observed trend of Eint in g-C3N4 complexes was BA > TAA > AA > TBA, while in Li/g-C3N4, the trend was BA > AA > TBA > TAA. The electronic properties were studied by frontier molecular orbital (FMO) and natural bond orbital analyses. According to FMO, lithium metal doping greatly enhanced the conductivity of the complexes by generating new HOMOs near the Fermi level. A significant amount of charge transfer was also observed in complexes, reflecting the increase in charge conductivity. NCI and QTAIM analyses evidenced the presence of significant noncovalent dispersion and electrostatic forces in Li/g-C3N4 and respective complexes. Charge decomposition analysis gave an idea of the transfer of charge density between quantum dots and analytes. Finally, TD-DFT explained the optical behavior of the reported complexes. The findings of this study suggested that both bare g-C3N4 and Li/g-C3N4 can effectively be used as atmospheric sensors having excellent adsorbing properties toward toxic analytes.

Photoswitchable nonlinear optical properties of azobenzene-based supramolecular complexes: insights from density functional theory.

Density functional theory (DFT) calculations were performed for a series of supramolecular assemblies containing azobenzene (Azo-X where X = I, Br and H) and alkoxystilbazole subunits to evaluate their electronic, linear and nonlinear optical properties. These assemblies are derivatives of azobenzene, obtained by the substitution of electron-withdrawing and electron-donating groups onto the molecular skeleton. The interaction energies (Eint) of all the designed supramolecular complexes (IA-IF, IIA-IIF and IIIA-IIIF) range from -1.0 kcal mol-1 to -7.7 kcal mol-1. The electronic properties of these hydrogen/halogen bond driven supramolecular assemblies such as vertical ionization energies (VIE), HOMO-LUMO energy gap (GH-L), excitation energies, density of states (DOS) and natural population (NPA) analyses were also computed. The non-covalent interaction index (NCI) and quantum theory of atoms in molecules (QTAIM) analyses were also performed to validate the nature of inter- and intra-molecular interactions in these complexes. A substantial enhancement in the first hyperpolarizability (ß0) values of the designed supramolecular complexes was observed, which is driven by the charge transfer from the pyridyl moiety of alkoxystilbazole to Azo-X. The highest ß0 value of 1.3 × 104 au was observed for the supramolecular complex of p-nitro substituted azobenzene with alkoxystilbazole (ID complex). Moreover, the results show that the substitution of electron-withdrawing groups on Azo-X can also bring larger ß0 values for such complexes. It was confirmed on a purely theoretical basis that both the types of noncovalent interactions present and the substituent group incorporated influence the nonlinear optical (NLO) response of the systems. Furthermore, the ß0 values of the E (trans) and Z (cis) forms were compared to demonstrate the two-way photoinduced switching mechanism.

Surface engineered mesoporous silica carriers for the controlled delivery of anticancer drug 5-fluorouracil: Computational approach for the drug-carrier interactions using density functional theory.

Introduction: Drug delivery systems are the topmost priority to increase drug safety and efficacy. In this study, hybrid porous silicates SBA-15 and its derivatives SBA@N and SBA@3N were synthesized and loaded with an anticancer drug, 5-fluorouracil. The drug release was studied in a simulated physiological environment. Method: These materials were characterized for their textural and physio-chemical properties by scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), small-angle X-ray diffraction (SAX), and nitrogen adsorption/desorption techniques. The surface electrostatics of the materials was measured by zeta potential. Results: The drug loading efficiency of the prepared hybrid materials was about 10%. In vitro drug release profiles were obtained in simulated fluids. Slow drug release kinetics was observed for SBA@3N, which released 7.5% of the entrapped drug in simulated intestinal fluid (SIF, pH 7.2) and 33% in simulated body fluid (SBF, pH 7.2) for 72 h. The material SBA@N presented an initial burst release of 13% in simulated intestinal fluid and 32.6% in simulated gastric fluid (SGF, pH 1.2), while about 70% of the drug was released within the next 72 h. Density functional theory (DFT) calculations have also supported the slow drug release from the SBA@3N material. The release mechanism of the drug from the prepared carriers was studied by first-order, second-order, Korsmeyer-Peppas, Hixson-Crowell, and Higuchi kinetic models. The drug release from these carriers follows Fickian diffusion and zero-order kinetics in SGF and SBF, whereas first-order, non-Fickian diffusion, and case-II transport were observed in SIF. Discussion: Based on these findings, the proposed synthesized hybrid materials may be suggested as a potential drug delivery system for anti-cancer drugs such as 5-fluorouracil.

Therapeutic potential of oxo-triarylmethyl (oxTAM) as a targeted drug delivery system for nitrosourea and fluorouracil anticancer drugs; A first principles insight.

In this study, oxygenated triarylmethyl (oxTAM) is investigated by DFT calculations as a drug carrier framework for Nitrosourea (NU) and Fluorouracil (FU) drugs. Based on the adsorption analysis i.e., energies and distances between interacting atoms, it is found that oxTAM exhibits excellent carrier abilities for the delivery of FU (-1.53 eV & 2.00 Å) and NU (-1.33 eV & 2.12 Å) drugs. NCI and QTAIM results indicate the presence of hydrogen bonding in drug-carrier complexes. The values of dipole moment and global chemical descriptors show the significant reactivity of oxTAM for NU and FU drugs. Based on electronic property analysis, FU@oxTAM has a higher adsorption trend for complexation with oxTAM as compared to NU@oxTAM. Moreover, FU can easily release from the carrier due to the decreasing adsorption stability after protonation under an acidic environment as well as a short recovery time observed for the oxTAM carrier surface. Keeping in view all the above parameters, we inferred that oxTAM can serve as a potential drug delivery system for anticancer drugs including, Nitrosourea and Fluorouracil drugs.

Task-specific polymeric membranes to achieve high gas-liquid mass transfer.

In the current study, Polyimide (P84)-based polymeric membranes were fabricated and used as spargers in the bubble column reactor (BCR) to get a high gas-liquid mass transfer (GL-MT) rate of oxygen in water. Different polymeric membranes were fabricated by incorporating polyvinyl pyrrolidone (PVP) as a porogen and a Zeolitic Imidazolate Framework (ZIF-8) to induce high porosity and hydrophobicity in the membranes. The GL-MT efficiency of membranes was evaluated by measuring the overall volumetric mass transfer coefficient (kLa) of oxygen in air. The kLa of O2 (in air) was measured by supplying the gas through a fixed membrane surface area of 11.94 cm2 at a fixed gas flow rate of 3L/min under atmospheric pressure. The results revealed that adding porogen and ZIF-8 increased the porosity of the membranes compared to the pure polymeric membranes. In comparison, the ZIF-8 (3 wt%) based membrane showed the highest porosity (80%), hydrophobicity (95° contact angle) and kLa of oxygen in air (241.2 h-1) with 78% saturation in only 60 s. ZIF-8 based membranes showed the potential to increase the amount of dissolved oxygen in BCR by reducing the bubble size, increasing the number of bubbles, and improving the hydrophobicity. The study showed that ZIF-8 based membrane diffusers are expected to produce high GL-MT in microbial syngas fermentation. To the best of our knowledge, this is the first study on the fabrication and application of polymeric membranes for GL-MT applications. Further research should be conducted under real fermentation conditions to assess the practicality of the system to support substrate utilization, microbial growth, and product formation.

Computational investigation of a covalent triazine framework (CTF-0) as an efficient electrochemical sensor.

In the current study, a covalent triazine framework (CTF-0) was evaluated as an electrochemical sensor against industrial pollutants i.e., O3, NO, SO2, SO3, and CO2. The deep understanding of analytes@CTF-0 complexation was acquired by interaction energy, NCI, QTAIM, SAPT0, EDD, NBO and FMO analyses. The outcome of interaction energy analyses clearly indicates that all the analytes are physiosorbed onto the CTF-0 surface. NCI and QTAIM analysis were employed to understand the nature of the non-covalent interactions. Furthermore, SAPT0 analysis revealed that dispersion has the highest contribution towards total SAPT0 energy. In NBO analysis, the highest charge transfer is obtained in the case of SO3@CTF-0 (-0.167 e-) whereas the lowest charge transfer is observed in CO2@CTF-0. The results of NBO charge transfer are also verified through EDD analysis. FMO analysis revealed that the highest reduction in the HOMO-LUMO energy gap is observed in the case of O3 (5.03 eV) adsorption onto the CTF-0 surface, which indicates the sensitivity of CTF-0 for O3 analytes. We strongly believe that these results might be productive for experimentalists to tailor a highly sensitive electrochemical sensor using covalent triazine-based frameworks (CTFs).

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach.

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C32H16, C64H32) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%EH-La) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C32H16 and C64H32) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Electrochemical sensing behavior of graphdiyne nanoflake towards uric acid: a quantum chemical approach.

Though the gas sensing applications of graphdiyne have widely reported; however, the biosensing utility of graphdiyne needs to be explored. This study deals with the sensitivity of graphdiyne nanoflake (GDY) towards the uric acid (UA) within the density functional framework. The uric acid is allowed to interact with graphdiyne nanoflake from all the possible orientations. Based on these interacting geometries, the complexes are differentiated with naming, i.e., UA1@GDY, UA2@GDY, UA3@GDY, and UA4@GDY (Fig. 1). The essence of interface interactions of UA on GDY is derived by computing geometric, energetic, electronic, and optical properties. The adsorbing affinity of complexes is evaluated at ωB97XD/6-31 + G(d, p) level of theory. The stabilities of the complexes are quantified through the interaction energies (Eint) with reasonable accuracy. The calculated Eint of the UA1@GDY, UA2@GDY, UA3@GDY, and UA4@GDY complexes are - 31.13, - 25.87, - 20.59, and - 16.54 kcal/mol, respectively. In comparison with geometries, it is revealed that the higher stability of complexes is facilitated by π-π stacking. Other energetic analyses including symmetry adopted perturbation theory (SAPT), noncovalent interaction index (NCI), and quantum theory of atoms in molecule (QTAIM) provide the evidence of dominating dispersion energy in stabilizing the resultant complexes. The HOMO-LUMO energies, NBO charge transfer, and UV-vis analysis justify the higher electronic transition in UA1@GDY, plays a role of higher sensitivity of GDY towards the π-stacked geometries over all other possible interaction orientations. The present findings bestow the higher sensitivity of GDY towards uric acid via π-stacking interactions. Fig. 1 Optimized geometries (with interaction distances in Å) of UA@GDY complexes.

Synthesis and DPPH scavenging assay of reserpine analogues, computational studies and in silico docking studies in AChE and BChE responsible for Alzheimer's disease

Alzheimer's disease (AD) is a fast growing neurodegenerative disorder of the central nervous system and anti-oxidants can be used to help suppress the oxidative stress caused by the free radicals that are responsible for AD. A series of selected synthetic indole derivatives were biologically evaluated to identify potent new antioxidants. Most of the evaluated compounds showed significant to modest antioxidant properties (IC50 value 399.07 140.0±50 µM). Density Functional Theory (DFT) studies were carried out on the compounds and their corresponding free radicals. Differences in the energy of the parent compounds and their corresponding free radicals provided a good justification for the trend found in their IC50 values. In silico, docking of compounds into the proteins acetylcholinesterase (AChE) and butyrylcholinesterase (BChE), which are well known for contributing in AD disease, was also performed to predict anti-AD potential.

A doença de Alzheimer (DA) é uma doença neurodegenerativado sistema nervoso central, em rápido crescimento, e antioxidantes ajudam a suprimir o estresse oxidativo causado por radicais livres, responsávies pela DA. Avaliou-se, biologicamente, série de derivados sintéticos de indol selecionados para identificar novos antioxidantes. A maioria dos compostos avaliados apresentou de significativa a boa propriedade antioxidante (valor de IC50 399,07140.0 ± 50 µM). Eftuaram-se estudos de Teoria do Funcional de Densidade (DFT) com os compostos e os seus correspondentes radicais livres. As diferenças de energia entre os compostos protótipos e os radicais livres correspondentes proporcionaram boa justificativa para a tendência encontrada nos seus valores de IC50. O ancoramento in silico dos compostos com a acetilcolinesterase (AChE) e com a butirilcolinesterase (BChE), que contribuem para a DA, foi, também, realizado para prever o seu potencial anti-DA.