Vascular Delay Soft Tissue Technique in Oral/Maxillary Bone Reconstructive Surgery: A Technical Note.

PURPOSE: The present study describes a new presurgical soft tissue technique in oral/maxillary bone reconstructive surgery for reducing the risk of soft tissue dehiscence and its related complications. MATERIALS AND METHODS: Ten consecutive patients with Cawood and Howell type V atrophy were scheduled for CAD/CAM titanium mesh bone reconstructive surgery after applying the vascular delay technique 21 days before regenerative surgery. The surgical and healing complications were clinically assessed at nine time points, ranging from the time of bone regenerative surgery to 9 months after surgery. Surgical complications included flap damage and neurologic and vascular complications. Healing complications were subdivided into four classes. These classes comprised Class I: small membrane exposure (≤ 3 mm) without purulent exudate; Class II: large membrane exposure (> 3 mm) without purulent exudate; Class III: membrane exposure with purulent exudate; and Class IV: abscess formation without membrane. RESULTS: The study sample included seven men and three women (mean age: 48.2 ± 3.5 years) with seven mandibular cases and three maxillary cases. The defect length ranged from three to six teeth, with a mean mesiodistal distance of 29.9 ± 8.5 mm and a mean volume augmentation of 2.03 ± 0.9 cm3. There were no surgical complications. One patient presented a Class I healing complication that did not affect the regeneration outcome. CONCLUSIONS: The vascular delay technique appears to reduce the risk of soft tissue dehiscence and exposure in bone regenerative surgery, though randomized studies involving larger samples and longer follow-up periods are needed in order to draw firm conclusions.

Effectiveness of virtual reality in relieving anxiety and controlling hemodynamics during oral surgery under local anesthesia: A prospective randomized comparative study.

It was the aim of the study to evaluate the contribution of a relaxing immersive experience with virtual reality (VR) goggles in reducing patient anxiety related to wisdom tooth extraction under local anesthesia. A prospective randomized comparative study in consecutive patients scheduled for bilateral wisdom tooth extraction under local anesthesia was carried out between March and December 2022. Both sides were operated upon in the same surgery, but on one side VR goggles were applied (VR), while on the other they were not (noVR). Anxiety was evaluated both subjectively (State-Trait Anxiety Inventory [STAI] and visual analogue scale [VAS]) and objectively (measuring heart rate, blood pressure [BP] and blood oxygen saturation) before (T1) and after each surgical step (T2VR and T2noVR). The study sample consisted of 27 patients: 9 men and 18 women, with an average age of 25.8 ± 6.5 years (range: 18-43). Anxiety as assessed by the STAI and VAS decreased from T1 to T2 (p < 0.001 and p < 0.001, respectively), although to a similar degree regardless of whether VR was used or not. Heart rate showed significant differences influenced by RV exposure (p = 0.013): it increased +2.5 ± 8.8 bpm in the control group and decreased -2.22 ± 7.55 bpm with VR (p = 0.013). Both minimum and maximum BP after surgery were significantly higher in the noVR group (p = 0.002 and p = 0.040, respectively). Regarding minimum BP, VR proved more effective among male patients (p = 0.057) and on starting the procedure using VR (p = 0.055). The results provided evidence of meaningful control of the hemodynamic variables, but less predictable performance in the subjective evaluation of anxiety.

Does Aesthetic Osseous Genioplasty Impact Upper Airway Volume?

BACKGROUND: Although maxillomandibular advancement is the treatment of choice for obstructive sleep apnea syndrome (OSAS) in the presence of underlying maxillomandibular complex hypoplasia, there is still a gap in the literature regarding the impact of genioplasty upon upper airway volume (UAV). OBJECTIVES: The aim of this study was to evaluate the impact of isolated osseous genioplasty upon UAV. METHODS: A retrospective analysis of all patients subjected to isolated osseous genioplasty between July 2015 and July 2022 was conducted. Cone-beam computed tomography was performed preoperatively and postoperatively to assess the chin and hyoid 3-dimensional (3D) spatial position and UAV changes after surgery. RESULTS: A total of 44 patients were included in the study. Regarding surgical movements of the chin, almost all patients received a sagittal movement (n = 42; 39 forward and 3 backward), while in 8 patients a vertical movement (5 upward and 3 downward) was applied, and in 6 patients the chin was centered. Statistically significant increases in total UAV (P = .014) and at the level of the oropharynx (P = .004) were observed. Specifically, chin centering, upward and forward movements enlarged the oropharynx volume (P = .006, .043 and .065, respectively). Chin advancement enlarged the hypopharynx volume (P = .032), as did upward movement of the hyoid bone (P < .001). CONCLUSIONS: Results of the study suggest that aesthetic osseous genioplasty impacts the UAV: each 3D spatial chin movement differently impacts the upper airway by enlarging or narrowing it. However, further studies addressing the apnea-hypopnea index are required to assess its effectiveness in treating OSAS.

Dynamic Implant Surgery-An Accurate Alternative to Stereolithographic Guides-Systematic Review and Meta-Analysis.

(1) Background: Dynamic guided surgery is a computer-guided freehand technology that allows highly accurate procedures to be carried out in real time through motion-tracking instruments. The aim of this research was to compare the accuracy between dynamic guided surgery (DGS) and alternative implant guidance methods, namely, static guided surgery (SGS) and freehand (FH). (2) Methods: Searches were conducted in the Cochrane and Medline databases to identify randomized controlled clinical trials (RCTs) and prospective and retrospective case series and to answer the following focused question: "What implant guidance tool is more accurate and secure with regard to implant placement surgery?" The implant deviation coefficient was calculated for four different parameters: coronal and apical horizontal, angular, and vertical deviations. Statistical significance was set at a p-value of 0.05 following application of the eligibility criteria. (3) Results: Twenty-five publications were included in this systematic review. The results show a non-significant weighted mean difference (WMD) between the DGS and the SGS in all of the assessed parameters: coronal (n = 4 WMD = 0.02 mm; p = 0.903), angular (n = 4 WMD = -0.62°; p = 0.085), and apical (n = 3 WMD = 0.08 mm; p = 0.401). In terms of vertical deviation, not enough data were available for a meta-analysis. However, no significant differences were found among the techniques (p = 0.820). The WMD between DGS and FH demonstrated significant differences favoring DGS in three parameters as follows: coronal (n = 3 WMD = -0.66 mm; p =< 0.001), angular (n = 3 WMD = -3.52°; p < 0.001), and apical (n = 2 WMD = -0.73 mm; p =< 0.001). No WMD was observed regarding the vertical deviation analysis, but significant differences were seen among the different techniques (p = 0.038). (4) Conclusions: DGS is a valid alternative treatment achieving similar accuracy to SGS. DGS is also more accurate, secure, and precise than the FH method when transferring the presurgical virtual implant plan to the patient.

Barcelona line. A multicentre validation study of a facial projection reference in orthognathic surgery.

The purpose of this study was to validate an already published facial anteroposterior reference: upper incisor (UI) to soft tissue plane or so-called Barcelona line (BL) to trace the most aesthetic sagittal position of the maxilla. A cross-sectional multicentre evaluation of Caucasian patients from Spain and Brazil with different anteroposterior maxillary positions was designed. Sagittal images in natural head orientation of grouped patients according to the horizontal distance from the UI to BL were ranked by healthcare professionals and non-professional Caucasian raters according to the aesthetic perception of each profile, using a digital survey. Seventy-four raters (50 laypeople, 12 orthodontists, and 12 maxillofacial surgeons) rated 40 profiles. The best-rated profile corresponded to group 3 (0-4 mm UI-BL) with 61.8% of positive evaluations, followed by group 4 (≥ 4 mm UI-BL): with 61.1%. On the other hand, group 1 (≤-4 mm UI-BL) was the worst-ranked profile with 71.8% of negative evaluations, followed by group 2 (-4-0 mm UI-BL): with 59.6% of negative evaluations. The correlation between the mean assessment score and UI-BL showed a moderately-strong association (r = 0.68, p < 0.001). The inter-rater reliability of assessment (74 evaluators) was moderate (k = 0.49, 95% CI: 0.39 to 0.59). The results suggest that protrusive middle-third facial profiles are preferable. The BL is proposed as a simple, individualised, and reproducible tool to trace an aesthetic sagittal position of the maxilla in orthognathic surgery.

Covariates Relating to Implant Failure and Marginal Bone Loss of a Novel Triangular Neck-Implant Placed by Post-Graduate Students: A 1-Year Prospective Cohort Study.

(1) Background: Most of the clinical literature dealing with dental implants has been issued by experienced teams working either in university settings or in private practice. The purpose of this study was to identify contributing covariates to implant failure and marginal bone loss (MBL) at the 1-year follow-up of a novel triangular-neck implant design when placed by inexperienced post-graduate students. (2) Methods: A prospective cohort study was conducted on study participants eligible for implant placement at the UIC (International University of Catalonia), Barcelona, Spain. Implant failure rate and contributors to implant failure and MBL were investigated among 24 implant and patient variables. (3) Results: One hundred and twenty implants (V3, MIS) were placed and rehabilitated by the students. The mean insertion torque was 37.1 Ncm. Survival and success rates were 97.5% and 96.7%, respectively. Implants placed in patients with smoking habits displayed a tendency of higher failure risk (OR = 5.31, p = 0.17) when compared to non-smokers. The mean (SD) MBL was 0.51 (0.44) mm. Gender significantly affected the MBL (p = 0.020). Bleeding on probing (BoP) on the buccal sites proved to be a good predictor of proximal MBL (p = 0.030). (4) Conclusions: The survival and success rates of the V3 triangular-neck implant placed by inexperienced post-graduate students at the 1-year follow-up were high and similar to the ones published in the literature by experienced teams on other implants.

Interpositional collagenated cancellous bone blocks for nasal dorsum augmentation: A new technique for nasomaxillary hypoplasia treatment.

Nasomaxillary hypoplasia is a rare congenital malformation involving the middle third of the face. The present paper describes a novel technique for restoring the nasal projection in a patient with nasomaxillary hypoplasia, analyses its advantages and limitations, and discusses its potential applicability in other similar contexts. After orthognathic surgery, lateral osteotomies of the nasal bones were performed integrally with a piezoelectric device using a long cutting saw tip through the intraoral approach. The nasal bones were then projected by interpositioning two triangular-shaped collagenated cancellous bone graft blocks on each side in the osteotomies between the nasal and the frontal processes of the maxillary bones. Cone-beam computed tomography (CBCT) data was used to perform a morphometric analysis at one and 12 months of follow-up through image superimposition, which revealed a stable increased projection of the nasal dorsum and an anterior nasal spine (ANS) of 5.18 mm and 5.52 mm, respectively. The results of this case suggest that the technique affords satisfactory nasal dorsum augmentation while avoiding the use of permanent foreign materials, with minimal morbidity, no unsightly and visible scars, great patient satisfaction, and adequate stability at 12 months of follow-up.

What are the Surgical Movements in Orthognathic Surgery That Most Affect the Upper Airways? A Three-Dimensional Analysis.

PURPOSE: Most studies have focused on airway changes after maxillomandibular advancement; however, airway size will change depending on the type, direction, and magnitude of each skeletal movement. The aim of this study was to assess the effect of the maxillary and/or mandibular movements on the pharyngeal airway volume and the minimum cross-sectional area using 3-dimensional cone-beam computed tomography voxel-based superimposition. PATIENTS AND METHODS: The investigators designed and implemented a retrospective cohort study composed of patients with dentofacial deformity subjected to orthognathic surgery. The predictor variables were the surgical movements performed at surgery. The primary outcome variables were the pharyngeal airway volume and minimum cross-sectional area measured preoperatively, at 1- and 12-month follow-up. Skeletal and volumetric relapse and stability were recorded as secondary outcomes at 1 and 12 months, respectively. Descriptive, bivariate and correlation analyses were computed. Significance was set at P < .05. RESULTS: The sample was composed of 103 patients grouped as follows: bimaxillary (53), maxillary (25), or isolated mandible (25). All of the surgical treatments resulted in a significant linear pattern of initial immediate increase of 33.4% (95% confidence interval [CI]: 28.2 to 38.7%; P < .001) in volumetric (nasopharynx [28.7%, CI: 22.7 34.9%; P < .001], oropharynx [36.2%, CI: 29.0 to 43.5%; P < .001], and hypopharynx [31.5%, CI: 25.7 to 37.3%; P < .001]) and minimum cross-sectional area parameters (bimaxillary = 104%, [CI: 87.1 to 122.1%; P < .001], maxillary = 39.5%, [CI: 18.4 to 60.7%; P < .05], and mandible = 65.8%, [CI: 48.1 to 83.6%; P < .05]), followed by a slight downward trend (stabilization) at 12-month follow-up. Airway increase was favored by mandibular advancement (P < .05) and mandibular occlusal plane changes by counterclockwise rotation (P < .05). CONCLUSIONS: The results of this study suggest that there is a favorable effect of orthognathic surgery in the upper airway regardless of the surgical approach, with bimaxillary advancement and mandibular occlusal plane changes by counterclockwise rotation being the most significant contributors.

Impact of surgical maxillomandibular advancement upon pharyngeal airway volume and the apnoea-hypopnoea index in the treatment of obstructive sleep apnoea: systematic review and meta-analysis.

Background: A systematic review was carried out on the effect of surgical maxillomandibular advancement (MMA) on pharyngeal airway (PA) dimensions and the apnoea-hypopnoea index (AHI) in the treatment of obstructive sleep apnoea (OSA), with the aim of determining whether increased PA in the context of MMA is the main factor conditioning the subsequent decrease in AHI. Methods: A search was made of the PubMed, Embase, Google Scholar and Cochrane databases. A total of 496 studies were identified. The inclusion criteria were a diagnosis of moderate to severe OSA, MMA success evaluated by polysomnography, reporting of the magnitude of MMA achieved, PA increase and a minimum follow-up of 6 months. Results: Following application of the eligibility criteria, eight articles were included. Metaregression analysis showed MMA to significantly increase both pharyngeal airway volume (PAV) (mean 7.35 cm3 (range 5.35-9.34)) and pharyngeal airway space (mean 4.75 mm (range 3.15-6.35)) and ensure a final AHI score below the threshold of 20 (mean 12.9 events/hour). Conclusions: Although subgroup analysis showed MMA to be effective in treating OSA, more randomised trials are needed to individualise the required magnitude and direction of surgical movements in each patient, and to standardise the measurements of linear and nonlinear PAV parameters.