Siliplant1 B-domain precipitates silica spheres, aggregates, or gel, depending on Si-precursor to peptide ratios.

Silica is extensively deposited by plants, however, only little is known about the molecular control over this process. Siliplant1 is the only known plant protein to precipitate biosilica. The protein contains seven repeats made of three domains. One of the domains exhibits a conserved sequence, which catalyzes silica precipitation in vitro. Here, silica was synthesized by the activity of a peptide carrying this conserved sequence. Infrared spectroscopy and thermal gravimetric analyses showed that the peptide was bound to the mineral. Scanning electron microscopy showed that silica-peptide particles of 22 ± 4 nm aggregated to spherical structures of 200-300 nm when the ratio of silicic acid to the peptide was below 183:1 molecules. When the ratio was about 183:1, similar particles aggregated into irregular structures, and silica gel formed at higher ratios. Solid-state NMR spectra indicated that the irregular aggregates were richer in Si-O-Si bonds as well as disordered peptide. Our results suggest that the peptide catalyzed the condensation of silicic acid and the formation of ∼20 nm particles, which aggregated into spheres. Excess of the peptide stabilized surface Si-OH groups that prevented spontaneous Si-O-Si bonding between aggregates. Under Si concentrations relevant to plant sap, the peptide and possibly Siliplant1, could catalyze nucleation of silica particles that aggregate into spherical aggregates.

Peptides from diatoms and grasses harness phosphate ion binding to silica to help regulate biomaterial structure.

Many life forms generate intricate submicron biosilica structures with various important biological functions. The formation of such structures, from the silicic acid in the waters and in the soil, is thought to be regulated by unique proteins with high repeats of specific amino acids and unusual sidechain modifications. Some silicifying proteins are characterized by high prevalence of basic amino acids in their primary structures. Lysine-rich domains are found, for instance, in diatom silaffin proteins and in the sorghum grass siliplant1 protein. These domains exhibit catalytic activity in silica chain condensation, owing to molecular interactions of the lysine amine groups with the forming mineral. The use of amine chemistry by two very remote organisms has motivated us to seek other molecular biosilicification processes that may be common to the two life forms. In diatom silaffins, domains rich in phosphoserine residues are thought to assist the assembly of silaffin molecules into an organic supra-structure which serves as a template for the silica to precipitate on. This mold, held by salt bridges between serine phosphates and lysine amines, dictates the shape of the silica particles formed. Yet, silica synthesized with the dephosphorylated silaffin in phosphate buffer showed similar morphology to the one prepared with the native protein, suggesting that a defined spatial arrangement of serine phosphates is not required to generate silica with the desired shape. Concurrently, free phosphates enhanced the activity of siliplant1 in silica formation. It is therefore beneficial to characterize the involvement of these anions as co-factors in regulated silicification by functional peptides from the two proteins and to understand whether they play similar molecular role in the mechanism of mineralization. Here we analyze the molecular interactions of free phosphate ions with silica and the silaffin peptide PL12 and separately with silica and siliplant1 peptide SLP1 in the two biomimetic silica products generated by the two peptides. MAS NMR measurements show that the phosphate ions interact with the peptides and at the same time may be forming bonds with the silica mineral. This bridging capability may add another avenue by which the structure of the silica material is influenced. A model for the molecular/ionic interactions at the bio-inorganic interface is described, which may have bearings for the role of phosphorylated residues beyond the function as intermolecular cross linkers or free phosphate ions as co-factors in regulation of silicification. STATEMENT OF SIGNIFICANCE: The manuscript addresses the question how proteins in diatoms and plants regulate the biosilica materials that are produced for various purposes in organisms. It uses preparation of silica in vitro with functional peptide derivatives from a sorghum grass protein and from a diatom silaffin protein separately to show that phosphate ions are important for the control that is achieved by these proteins on the final shape of the silica material produced. It portrays via magnetic resonance spectroscopic measurements, in atomic detail, the interface between atoms in the peptide, atoms on the surface of the silica formed and the phosphate ions that form chemical bonds with atoms on the silica as part of the mechanism of action of these peptides.

Engineering l-asparaginase for spontaneous formation of calcium phosphate bioinspired microreactors.

Active bioinspired materials are appealing biotechnological targets, and their study is gaining momentum. These materials, which comprise of an inorganic matrix and one or more biomolecules, are extremely variable and therefore may result difficult to characterize in their intimate structure. In this work we have prepared a hydroxyapatite-l-asparaginase composite, with the perspective of using it in acute leukemia treatment. We demonstrate that the use of electron microscopy and powder X-ray diffraction, combined with the atomic-resolution information coming from solid-state NMR, allows us to understand the topology of the material and how the different components interplay to obtain an active composite.

A REDOR ssNMR Investigation of the Role of an N-Terminus Lysine in R5 Silica Recognition.

Diatoms are unicellular algae that construct cell walls called frustules by the precipitation of silica, using special proteins that order the silica into a wide variety of nanostructures. The diatom species Cylindrotheca fusiformis contains proteins called silaffins within its frustules, which are believed to assemble into supramolecular matrices that serve as both accelerators and templates for silica deposition. Studying the properties of these biosilicification proteins has allowed the design of new protein and peptide systems that generate customizable silica nanostructures, with potential generalization to other mineral systems. It is essential to understand the mechanisms of aggregation of the protein and its coprecipitation with silica. We continue previous investigations into the peptide R5, derived from silaffin protein sil1p, shown to independently catalyze the precipitation of silica nanospheres in vitro. We used the solid-state NMR technique 13C{29Si} and 15N{29Si} REDOR to investigate the structure and interactions of R5 in complex with coprecipitated silica. These experiments are sensitive to the strength of magnetic dipole-dipole interactions between the 13C nuclei in R5 and the 29Si nuclei in the silica and thus yield distance between parts of R5 and 29Si in silica. Our data show strong interactions and short internuclear distances of 3.74 ± 0.20 Å between 13C═O Lys3 and silica. On the other hand, the Cα and Cß nuclei show little or no interaction with 29Si. This selective proximity between the K3 C═O and the silica supports a previously proposed mechanism of rapid silicification of the antimicrobial peptide KSL (KKVVFKVKFK) through an imidate intermediate. This study reports for the first time a direct interaction between the N-terminus of R5 and silica, leading us to believe that the N-terminus of R5 is a key component in the molecular recognition process and a major factor in silica morphogenesis.

A J-modulated protonless NMR experiment characterizes the conformational ensemble of the intrinsically disordered protein WIP.

Intrinsically disordered proteins (IDPs) are multi-conformational polypeptides that lack a single stable three-dimensional structure. It has become increasingly clear that the versatile IDPs play key roles in a multitude of biological processes, and, given their flexible nature, NMR is a leading method to investigate IDP behavior on the molecular level. Here we present an IDP-tailored J-modulated experiment designed to monitor changes in the conformational ensemble characteristic of IDPs by accurately measuring backbone one- and two-bond J(15N,13Cα) couplings. This concept was realized using a unidirectional (H)NCO 13C-detected experiment suitable for poor spectral dispersion and optimized for maximum coverage of amino acid types. To demonstrate the utility of this approach we applied it to the disordered actin-binding N-terminal domain of WASp interacting protein (WIP), a ubiquitous key modulator of cytoskeletal changes in a range of biological systems. One- and two-bond J(15N,13Cα) couplings were acquired for WIP residues 2-65 at various temperatures, and in denaturing and crowding environments. Under native conditions fitted J-couplings identified in the WIP conformational ensemble a propensity for extended conformation at residues 16-23 and 45-60, and a helical tendency at residues 28-42. These findings are consistent with a previous study of the based upon chemical shift and RDC data and confirm that the WIP2-65 conformational ensemble is biased towards the structure assumed by this fragment in its actin-bound form. The effects of environmental changes upon this ensemble were readily apparent in the J-coupling data, which reflected a significant decrease in structural propensity at higher temperatures, in the presence of 8 M urea, and under the influence of a bacterial cell lysate. The latter suggests that crowding can cause protein unfolding through protein-protein interactions that stabilize the unfolded state. We conclude that J-couplings are a useful measureable in characterizing structural ensembles in IDPs, and that the proposed experiment provides a practical method for accurately performing such measurements, once again emphasizing the power of NMR in studying IDP behavior.

Design of Compact Biomimetic Cellulose Binding Peptides as Carriers for Cellulose Catalytic Degradation.

The conversion of biomass into biofuels can reduce the strategic vulnerability of petroleum-based systems and at the same time have a positive effect on global climate issues. Lignocellulose is the cheapest and most abundant source of biomass and consequently has been widely considered as a source for liquid fuel. However, despite ongoing efforts, cellulosic biofuels are still far from commercial realization, one of the major bottlenecks being the hydrolysis of cellulose into simpler sugars. Inspired by the structural and functional modularity of cellulases used by many organisms for the breakdown of cellulose, we propose to mimic the cellulose binding domain (CBD) and the catalytic domain of these proteins by small molecular entities. Multiple copies of these mimics could subsequently be tethered together to enhance hydrolytic activity. In this work, we take the first step toward achieving this goal by applying computational approaches to the design of efficient, cost-effective mimetics of the CBD. The design is based on low molecular weight peptides that are amenable to large-scale production. We provide an optimized design of four short (i.e., ∼18 residues) peptide mimetics based on the three-dimensional structure of a known CBD and demonstrate that some of these peptides bind cellulose as well as or better than the full CBD. The structures of these peptides were studied by circular dichroism and their interactions with cellulose by solid phase NMR. Finally, we present a computational strategy for predicting CBD/peptide-cellulose binding free energies and demonstrate its ability to provide values in good agreement with experimental data. Using this computational model, we have also studied the dissociation pathway of the CBDs/peptides from the surface of cellulose.

Changes to the Disordered Phase and Apatite Crystallite Morphology during Mineralization by an Acidic Mineral Binding Peptide from Osteonectin.

Noncollagenous proteins regulate the formation of the mineral constituent in hard tissue. The mineral formed contains apatite crystals coated by a functional disordered calcium phosphate phase. Although the crystalline phase of bone mineral was extensively investigated, little is known about the disordered layer's composition and structure, and less is known regarding the function of noncollagenous proteins in the context of this layer. In the current study, apatite was prepared with an acidic peptide (ON29) derived from the bone/dentin protein osteonectin. The mineral formed comprises needle-shaped hydroxyapatite crystals like in dentin and a stable disordered phase coating the apatitic crystals as shown using X-ray diffraction, transmission electron microscopy, and solid-state NMR techniques. The peptide, embedded between the mineral particles, reduces the overall phosphate content in the mineral formed as inferred from inductively coupled plasma and elemental analysis results. Magnetization transfers between disordered phase species and apatitic phase species are observed for the first time using 2D (1)H-(31)P heteronuclear correlation NMR measurements. The dynamics of phosphate magnetization transfers reveal that ON29 decreases significantly the amount of water molecules in the disordered phase and increases slightly their content at the ordered-disordered interface. The peptide decreases hydroxyl to disordered phosphate transfers within the surface layer but does not influence transfer within the bulk crystalline mineral. Overall, these results indicate that control of crystallite morphology and properties of the inorganic component in hard tissue by biomolecules is more involved than just direct interaction between protein functional groups and mineral crystal faces. Subtler mechanisms such as modulation of the disordered phase composition and structural changes at the ordered-disordered interface may be involved.

Covalent binding of a nickel macrocyclic complex to a silica support: towards an electron exchange column.

Ni(II)L(2), L(2) = 1-propyl-1,3,5,8,12-pentaazacyclotetradecane, was covalently bound to a silica support. This complex can be reversibly oxidized to the corresponding Ni(III) complex. The latter complex is relatively long lived. Therefore electron exchange columns based on this material can be prepared.