RESUMO
In this work, the pore structural parameters and size exclusion properties of LiChrospher strong cation-exchange and reverse phase restricted access materials (RAM) are analysed. The molecular weight size exclusion limit for polystyrenes was found to be about 17.7 kDa, while for standard proteins, the molecular weight size exclusion limit was higher, at approximately 25 kDa. The average pore diameter on a volume basis calculated from the pore network model changes from 8.5 nm (native LiChrospher) to 8.6 nm (diol derivative) to 8.2 nm (sulphonic acid derivative) to 6.9 nm (n-octadecyl derivative). Additional characterisations were performed on restricted access materials with nitrogen sorption at 77 K, water adsorption at 25 degrees C, intrusion-extrusion of water (in order to evaluate the hydrophobic properties of the pores of the hydrophobic RAM), and zeta potential measurements by microelectrophoresis. For peptide analysis out of the biofluids, the strong cation-exchange functionality seems to be particularly suitable mainly because of the high loadability of the strong cation-exchange restricted access material (SCX-RAM) and the fact that one can work under non-denaturing conditions to perform effective chromatographic separations. For bacitracin, the dynamic capacity of the SCX-RAM columns does not reach its maximum value in the analysed range. For lysozyme, the dynamic capacity reaches a value of 0.08 mg/ml of column volume before column is overloaded. Additionally, the proper column operating conditions that lead to the total effective working time of the RAM column to be equal to approximately 500 injections (depending on the type of sample), is comprehensively described. The SCX-RAM column was used in the same system analysing urine samples for the period of 1 month (approximately 150 injections) with run-to-run reproducibility below 5% RSD and below 10% RSD for the relative fractions.