Connexin hemichannels drive lactation-induced osteocyte acidification and perilacunar-canalicular remodeling.

The maternal skeleton experiences significant bone loss during lactation, followed by rapid restoration post weaning. Parathyroid-related protein (PTHrP)-induced acidification of the perilacunar matrix by osteocytes is crucial in this process, yet its mechanism remains unclear. Here, we identify Cx43 hemichannels (HCs) as key mediators of osteocyte acidification and perilacunar-canalicular remodeling (PLR). Utilizing transgenic mouse models expressing dominant-negative Cx43 mutants, we show that mice with impaired Cx43 HCs exhibit attenuated lactation-induced responses compared to wild-type and only gap junction-impaired groups, including lacunar enlargement, upregulation of PLR genes, and bone loss with compromised mechanical properties. Furthermore, inhibition of HCs by a Cx43 antibody blunts PTHrP-induced calcium influx and protein kinase A activation, followed by impaired osteocyte acidification. Additionally, impeded HCs suppress bone recovery during the post-lactation period. Our findings highlight the pivotal role of Cx43 HCs in orchestrating dynamic bone changes during lactation and recovery by regulating acidification and remodeling enzyme expression.

Electrospun composite-coated endotracheal tubes with controlled siRNA and drug delivery to lubricate and minimize upper airway injury.

Endotracheal Tubes (ETTs) maintain and secure a patent airway; however, prolonged intubation often results in unintended injury to the mucosal epithelium and inflammatory sequelae which complicate recovery. ETT design and materials used have yet to adapt to address intubation associated complications. In this study, a composite coating of electrospun polycaprolactone (PCL) fibers embedded in a four-arm polyethylene glycol acrylate matrix (4APEGA) is developed to transform the ETT from a mechanical device to a dual-purpose device capable of delivering multiple therapeutics while preserving coating integrity. Further, the composite coating system (PCL-4APEGA) is capable of sustained delivery of dexamethasone from the PCL phase and small interfering RNA (siRNA) containing polyplexes from the 4APEGA phase. The siRNA is released rapidly and targets smad3 for immediate reduction in pro-fibrotic transforming growth factor-beta 1 (TGFϐ1) signaling in the upper airway mucosa as well as suppressing long-term sequelae in inflammation from prolonged intubation. A bioreactor was used to study mucosal adhesion to the composite PCL-4APEGA coated ETTs and investigate continued mucus secretory function in ex vivo epithelial samples. The addition of the 4APEGA coating and siRNA delivery to the dexamethasone delivery was then evaluated in a swine model of intubation injury and observed to restore mechanical function of the vocal folds and maintain epithelial thickness when observed over 14 days of intubation. This study demonstrated that increase in surface lubrication paired with surface stiffness reduction significantly decreased fibrotic behavior while reducing epithelial adhesion and abrasion.

K+ontrol rapidly and efficiently reduces potassium in donor blood during ex vivo circulation.

BACKGROUND: Patients with kidney failure are at risk for lethal complications from hyperkalemia. Resuscitation, medications, and hemodialysis are used to mitigate increased potassium (K+) levels in circulating blood; however, these approaches may not always be readily available or effective, especially in a resource limited environment. We tested a sorbent cartridge (KC, K+ontrol CytoSorbents Medical Inc., Monmouth Junction, New Jersey) which contains a resin adsorber for K+. The objective of this study was to test the utility of KC in an ex vivo circulation system. We hypothesized that KC reduces K+ levels in extracorporeal circulation of donor swine whole blood infused with KCl. METHODS: A six-hour circulation study was carried out using KC, a NxStage (NxStage Medical, Inc., Lawrence, MA) membrane, blood bag containing heparinized whole blood with KCl infusion, 3/16-inch ID tubing, a peristaltic pump, and flow sensors. The NxStage permeate line was connected back to the main circuit in the Control group (n = 6), creating a recirculation loop. For KC group (n = 6), KC was added to the recirculation loop, and a continuous infusion of KCl at 10 mEq/hour was administered for two hours. Blood samples were acquired at baseline and every hour for 6 h. RESULTS: In the control group, K+ levels remained at ∼9 mmol/L; 9.1 ± 0.4 mmol/L at 6 h. In the KC group, significant decreases in K+ at hour 1 (4.3 ± 0.3 mmol/L) and were sustained for the experiment duration equilibrating at 4.6 ± 0.4 mmol/L after 6 h (p = 0.042). Main loop blood flow was maintained under 400 mL/min; recirculation loop flow varied between 60 and 70 mL/min in the control group and 45-55 mL/min in the KC group. Decreases in recirculation loop flow in KC group required 7% increase of pump RPM. CONCLUSIONS: During ex-vivo extracorporeal circulation using donor swine blood, KC removed approximately 50% of K+, normalizing circulating levels.

Electrically Stimulated Tunable Drug Delivery From Polypyrrole-Coated Polyvinylidene Fluoride.

Electrical stimulus-responsive drug delivery from conducting polymers such as polypyrrole (PPy) has been limited by lack of versatile polymerization techniques and limitations in drug-loading strategies. In the present study, we report an in-situ chemical polymerization technique for incorporation of biotin, as the doping agent, to establish electrosensitive drug release from PPy-coated substrates. Aligned electrospun polyvinylidene fluoride (PVDF) fibers were used as a substrate for the PPy-coating and basic fibroblast growth factor and nerve growth factor were the model growth factors demonstrated for potential applications in musculoskeletal tissue regeneration. It was observed that 18-h of continuous polymerization produced an optimal coating of PPy on the surface of the PVDF electrospun fibers with significantly increased hydrophilicity and no substantial changes observed in fiber orientation or individual fiber thickness. This PPy-PVDF system was used as the platform for loading the aforementioned growth factors, using streptavidin as the drug-complex carrier. The release profile of incorporated biotinylated growth factors exhibited electrosensitive release behavior while the PPy-PVDF complex proved stable for a period of 14 days and suitable as a stimulus responsive drug delivery depot. Critically, the growth factors retained bioactivity after release. In conclusion, the present study established a systematic methodology to prepare PPy coated systems with electrosensitive drug release capabilities which can potentially be used to encourage targeted tissue regeneration and other biomedical applications.

Development of a Bioinspired, Self-Adhering, and Drug-Eluting Laryngotracheal Patch.

OBJECTIVES/HYPOTHESIS: Novel laryngotracheal wound coverage devices are limited by complex anatomy, smooth surfaces, and dynamic pressure changes and airflow during breathing. We hypothesize that a bioinspired mucoadhesive patch mimicking how geckos climb smooth surfaces will permit sutureless wound coverage and also allow drug delivery. STUDY DESIGN: ex-vivo. METHODS: Polycaprolactone (PCL) fibers were electrospun onto a substrate and polyethylene glycol (PEG) - acrylate flocks in varying densities were deposited to create a composite patch. Sample topography was assessed with laser profilometry, material stiffness with biaxial mechanical testing, and mucoadhesive testing determined cohesive material failure on porcine tracheal tissue. Degradation rate was measured over 21 days in vitro along with dexamethasone drug release profiles. Material handleability was evaluated via suture retention and in cadaveric larynges. RESULTS: Increased flocking density was inversely related to cohesive failure in mucoadhesive testing, with a flocking density of PCL-PEG-2XFLK increasing failure strength to 6880 ± 1810 Pa compared to 3028 ± 791 in PCL-PEG-4XFLK density and 1182 ± 262 in PCL-PEG-6XFLK density. The PCL-PEG-2XFLK specimens had a higher failure strength than PCL alone (1404 ± 545 Pa) or PCL-PEG (2732 ± 840). Flocking progressively reduced composite stiffness from 1347 ± 15 to 763 ± 21 N/m. Degradation increased from 12% at 7 days to 16% after 10 days and 20% after 21 days. Cumulative dexamethasone release at 0.4 mg/cm2 concentration was maintained over 21 days. Optimized PCL-PEG-2XFLK density flocked patches were easy to maneuver endoscopically in laryngeal evaluation. CONCLUSIONS: This novel, sutureless, patch is a mucoadhesive platform suitable to laryngeal and tracheal anatomy with drug delivery capability. LEVEL OF EVIDENCE: NA Laryngoscope, 131:1958-1966, 2021.

Regeneration enhanced in critical-sized bone defects using bone-specific extracellular matrix protein.

Extracellular matrix (ECM) products have the potential to improve cellular attachment and promote tissue-specific development by mimicking the native cellular niche. In this study, the therapeutic efficacy of an ECM substratum produced by bone marrow stem cells (BM-MSCs) to promote bone regeneration in vitro and in vivo were evaluated. Fluorescence-activated cell sorting analysis and phenotypic expression were employed to characterize the in vitro BM-MSC response to bone marrow specific ECM (BM-ECM). BM-ECM encouraged cell proliferation and stemness maintenance. The efficacy of BM-ECM as an adjuvant in promoting bone regeneration was evaluated in an orthotopic, segmental critical-sized bone defect in the rat femur over 8 weeks. The groups evaluated were either untreated (negative control); packed with calcium phosphate granules or granules+BM-ECM free protein and stabilized by collagenous membrane. Bone regeneration in vivo was analyzed using microcomputed tomography and histology. in vivo results demonstrated improvements in mineralization, osteogenesis, and tissue infiltration (114 ± 15% increase) in the BM-ECM complex group from 4 to 8 weeks compared to mineral granules only (45 ± 21% increase). Histological observations suggested direct apposition of early bone after 4 weeks and mineral consolidation after 8 weeks implantation for the group supplemented with BM-ECM. Significant osteoid formation and greater functional bone formation (polar moment of inertia was 71 ± 0.2 mm4 with BM-ECM supplementation compared to 48 ± 0.2 mm4 in untreated defects) validated in vivo indicated support of osteoconductivity and increased defect site cellularity. In conclusion, these results suggest that BM-ECM free protein is potentially a therapeutic supplement for stemness maintenance and sustaining osteogenesis.

Quantifying vocal fold wound-healing biomechanical property changes.

OBJECTIVES: Development of novel vocal fold (VF) therapeutics is limited by a lack of standardized, meaningful outcomes. We hypothesize that automated microindentation-based VF biomechanical property mapping matched to histology permits quantitative assessment. STUDY DESIGN: Ex vivo. METHODS: Twelve anesthetized New Zealand white rabbits underwent endoscopic right VF injury. Larynges were harvested/bisected day 7, 30, or 60 (n = 4/group), with four uninjured controls. Biomechanical measurements (normal force, structural stiffness, and displacement at 1.96 mN) were calculated using automated microindentation mapping (0.3 mm depth, 1.2 mm/s, 2 mm spherical indenter) with a grid overlay (>50 locations weighted toward VF edge, separated into 14 zones). Specimens were marked/fixed/sectioned, and slides matched to measurement points. RESULTS: In the injury zone, normal force/structural stiffness (mean, standard deviation [SD]/mean, SD) increased from uninjured (2.2 mN, 0.64/7.4 mN/mm, 2.14) and day 7 (2.7 mN, 0.75/9.0 mN/mm, 2.49) to day 30 (4.3 mN, 2.11/14.2 mN/mm, 7.05) and decreased at 60 days (2.7 mN, 0.77/9.1 mN/mm, 2.58). VF displacement decreased from control (0.28 mm, 0.05) and day 7 (0.26 mm, 0.05) to day 30 (0.20 mm, 0.05), increasing at day 60 (0.25 mm, 0.06). A one-way ANOVA was significant; Tukey's post hoc test confirmed day-30 samples differed from other groups (P < 0.05), consistent across adjacent zones. Zones far from injury remained similar across groups (P = 0.143 to 0.551). These measurements matched qualitative histologic variations. CONCLUSION: Quantifiable VF biomechanical properties can be linked to histology. This technological approach is the first to simultaneously correlate functional biomechanics with histology and is ideal for future preclinical studies. LEVEL OF EVIDENCE: NA Laryngoscope, 130:454-459, 2020.

Localized low-dose rhBMP-2 is effective at promoting bone regeneration in mandibular segmental defects.

At least 26% of recent battlefield injuries are to the craniomaxillofacial (CMF) region. Recombinant human bone morphogenetic protein 2 (rhBMP-2) is used to treat CMF open fractures, but several complications have been associated with its use. This study tested the efficacy and safety of a lower (30% recommended) dose of rhBMP-2 to treat mandibular fractures. rhBMP-2 delivered via a polyurethane (PUR) and hydroxyapatite/ß-tricalcium phosphate (Mastergraft®) scaffold was evaluated in a 2 cm segmental mandibular defect in minipigs. Bone regeneration was analyzed at 4, 8, and 12 weeks postsurgery using clinical computed tomography (CT) and rhBMP-2, and inflammatory marker concentrations were analyzed in serum and surgery-site drain effluent. CT scans revealed that pigs treated with PUR-Mastergraft® + rhBMP-2 had complete bone bridging, while the negative control group showed incomplete bone-bridging (n = 6). Volumetric analysis of regenerated bone showed that the PUR-Mastergraft® + rhBMP-2 treatment generated significantly more bone than control by 4 weeks, a trend that continued through 12 weeks. Variations in inflammatory analytes were detected in drain effluent samples and saliva but not in serum, suggesting a localized healing response. Importantly, the rhBMP-2 group did not exhibit an excessive increase in inflammatory analytes compared to control. Treatment with low-dose rhBMP-2 increases bone regeneration capacity in pigs with mandibular continuity defects and restores bone quality. Negative complications from rhBMP-2, such as excessive inflammatory analyte levels, were not observed. Together, these results suggest that treatment with low-dose rhBMP-2 is efficacious and may improve safety when treating CMF open fractures. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1491-1503, 2019.

A Novel Secretome Biotherapeutic Influences Regeneration in Critical Size Bone Defects.

Severe traumatic injuries often result in critical size bone defects, which are unable to heal without treatment. Autologous grafting is the standard of care but requires additional surgeries for graft procurement. Amnion-derived multipotent progenitor cells release a secretome of biomolecules identified as integral to the process of bone regeneration and angiogenesis. This secretome is currently under development as a biotherapeutic. The efficacy of this secretome biotherapeutic was evaluated in vitro on the proliferation and migration of mesenchymal stem cells and osteoprogenitor cells as well as in vivo using a critical size rat calvarial defect model. The secretome biotherapeutic was loaded onto a collagen scaffold and placed into the defect, which was allowed to heal for 4 and 12 weeks. The secretome biotherapeutic enhanced the proliferation and migration of mesenchymal stem cells and proliferation of osteoprogenitor cells. Further, the secretome biotherapeutic improved new bone volume and connectivity by 12 weeks and significantly improved angiogenesis at 4 weeks and bone density at 4 and 12 weeks with no deleterious effects. The improvement in new bone volume, connectivity, and angiogenesis suggests that the secretome biotherapeutic has beneficial effects for bone healing and a higher dose of the secretome biotherapeutic may further improve regeneration.

Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model.

A bioactive two-layer coating consisting of hydroxyapatite (HA) and yttria-stabilized zirconia (YSZ) was investigated on cylindrical polyetheretherketone (PEEK) implants using ion beam assisted deposition (IBAD). Post-deposition heat treatments via variable frequency microwave annealing with and without subsequent autoclaving were used to crystallize the as-deposited amorphous HA layer. Microstructural analysis, performed by TEM and EDS, showed that these methods were capable of crystallizing HA coating on PEEK. The in vivo response to cylindrical PEEK samples with and without coating was studied by implanting uncoated PEEK and coated PEEK implants in the lateral femoral condyle of 18 rabbits. Animals were studied in two groups of 9 for observation at 6 or 18weeks post surgery. Micro-CT analysis, histology, and mechanical pull-out tests were performed to determine the effect of the coating on osseointegration. The heat-treated HA/YSZ coatings showed improved implant fixation as well as higher bone regeneration and bone-implant contact area compared to uncoated PEEK. The study offers a novel method to coat PEEK implants with improved osseointegration.

Investigation of a pre-clinical mandibular bone notch defect model in miniature pigs: clinical computed tomography, micro-computed tomography, and histological evaluation.

OBJECTIVES: To validate a critical-size mandibular bone defect model in miniature pigs. MATERIALS AND METHODS: Bilateral notch defects were produced in the mandible of dentally mature miniature pigs. The right mandibular defect remained untreated while the left defect received an autograft. Bone healing was evaluated by computed tomography (CT) at 4 and 16 weeks, and by micro-CT and non-decalcified histology at 16 weeks. RESULTS: In both the untreated and autograft treated groups, mineralized tissue volume was reduced significantly at 4 weeks post-surgery, but was comparable to the pre-surgery levels after 16 weeks. After 16 weeks, CT analysis indicated that significantly greater bone was regenerated in the autograft treated defect than in the untreated defect (P=0.013). Regardless of the treatment, the cortical bone was superior to the defect remodeled over 16 weeks to compensate for the notch defect. CONCLUSION: The presence of considerable bone healing in both treated and untreated groups suggests that this model is inadequate as a critical-size defect. Despite healing and adaptation, the original bone geometry and quality of the pre-injured mandible was not obtained. On the other hand, this model is justified for evaluating accelerated healing and mitigating the bone remodeling response, which are both important considerations for dental implant restorations.

Pretensioning of Soft Tissue Grafts in Anterior Cruciate Ligament Reconstruction.

To determine which preconditioning and pretensioning techniques should be applied to soft tissue grafts during anterior cruciate ligament (ACL) reconstruction to avoid loss of tension after surgery, fresh semitendinosus and tibialis anterior tendons underwent tensile mechanical testing with 4 pretensioning and/or preconditioning techniques. A mechanical tester was used to collect the data. Group I (n=5) was given only an initial 80 N pull for tensioning, Group II (n=4) was given pretensioning and initial tensioning, Group III (n=5) was given cyclic tensioning and initial tensioning, and Group IV (n=5) was given a combination of the 3 techniques. Group I lost 50% of the initial tension at 30 minutes. The residual tension in Groups II, III, and IV was significantly higher than that in Group I after 1, 10, and 30 minutes (P<.001). Group IV consistently showed significantly higher residual tension than Groups II and III after 10 and 30 minutes (P<.05). All groups experienced elongation during testing: Group I (10.8 mm)

Evaluation of Amniotic Multipotential Tissue Matrix to Augment Healing of Demineralized Bone Matrix in an Animal Calvarial Model.

Amniotic multipotential tissue matrix (AmnioMTM) is a membrane material derived from placental tissues and rich in growth factors that have been reported to have potential in healing bone. This study hypothesized that demineralized bone matrix (DBM) supplemented with AmnioMTM would accelerate healing and bone formation as compared with DBM alone in a critical size (10 mm) rat calvarial bone defect model. Five DBM grafts and 5 DBM supplemented with AmnioMTM grafts were implanted in a 10-mm critical sized defect in 10 rats (1 implant per rat). After 4 weeks, animals were euthanized and defects evaluated by microCT and histology. There were no statistical differences in microCT data for mineral density, percent bone fill, or bone surface to volume ratios between groups, though the bone surface to volume ratio for the amnio-supplemented group suggested increased osteoid activity as compared with the DBM alone group. Histological data also indicated active osteoid activity and induced bone formation in the center of defects implanted with AmnioMTM supplemented graft as compared with DBM graft alone suggesting some potential osteoinductive potential. However, there was no significant difference at the mean percent of newly mineralized bone in the DBM group defect as compared with the AmnioMTM supplemented graft material. These data suggest that while bone formation was not increased at this early time point, the increased osteoid activity and the induction of new bone in the middle of the defect by the AmnioMTM indicates that further study is needed to assess its potential benefit to bone healing and regeneration.

Effect of calcium phosphate coating and rhBMP-2 on bone regeneration in rabbit calvaria using poly(propylene fumarate) scaffolds.

Various calcium phosphate based coatings have been evaluated for better bony integration of metallic implants and are currently being investigated to improve the surface bioactivity of polymeric scaffolds. The aim of this study was to evaluate the role of calcium phosphate coating and simultaneous delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) on the in vivo bone regeneration capacity of biodegradable, porous poly(propylene fumarate) (PPF) scaffolds. PPF scaffolds were coated with three different calcium phosphate formulations: magnesium-substituted ß-tricalcium phosphate (ß-TCMP), carbonated hydroxyapatite (synthetic bone mineral, SBM) and biphasic calcium phosphate (BCP). In vivo bone regeneration was evaluated by implantation of scaffolds in a critical-sized rabbit calvarial defect loaded with different doses of rhBMP-2. Our data demonstrated that scaffolds with each of the calcium phosphate coatings were capable of sustaining rhBMP-2 release and retained an open porous structure. After 6weeks of implantation, micro-computed tomography revealed that the rhBMP-2 dose had a significant effect on bone formation within the scaffolds and that the SBM-coated scaffolds regenerated significantly greater bone than BCP-coated scaffolds. Mechanical testing of the defects also indicated restoration of strength in the SBM and ß-TCMP with rhBMP-2 delivery. Histology results demonstrated bone growth immediately adjacent to the scaffold surface, indicating good osteointegration and osteoconductivity for coated scaffolds. The results obtained in this study suggest that the coated scaffold platform demonstrated a synergistic effect between calcium phosphate coatings and rhBMP-2 delivery and may provide a promising platform for the functional restoration of large bone defects.

Novel osteoinductive photo-cross-linkable chitosan-lactide-fibrinogen hydrogels enhance bone regeneration in critical size segmental bone defects.

The purpose of this study was to develop and characterize a novel photo-cross-linkable chitosan-lactide-fibrinogen (CLF) hydrogel and evaluate the efficacy of bone morphogenetic protein-2 (BMP-2) containing a CLF hydrogel for osteogenesis in vitro and in vivo. We synthesized the CLF hydrogels and characterized their chemical structure, degradation rate, compressive modulus and in vitro BMP-2 release kinetics. We evaluated bioactivities of the BMP-2 containing CLF hydrogels (0, 50, 100 and 500ngml(-1)) in vitro using W-20-17 preosteoblast mouse bone marrow stromal cells and C2C12 mouse myoblast cells. The effect of BMP-2 containing CLF gels (0, 0.5, 1, 2 and 5µg) on bone formation was evaluated using rat critical size segmental bone defects for 4weeks. Fourier transform infrared spectroscopy spectra and scanning electron microscopy images showed chemical and structural changes by the addition of fibrinogen into the chitosan-lactide copolymer. The incorporation of fibrinogen molecules significantly increased the compressive modulus of the hydrogels. The in vitro BMP-2 release study showed initial burst releases from the CLF hydrogels followed by sustained releases, regardless of the concentration of the BMP-2 over 4weeks. Cells in all groups were viable in the presence of the hydrogels regardless of BMP-2 doses, indicating non-cytotoxicity of hydrogels. Alkaline phosphate activity and mineralization of cells exhibited dose dependence on BMP-2 containing CLF hydrogels. Radiography, microcomputed tomography and histology confirmed that the BMP-2 containing CLF hydrogels prompted neo-osteogenesis and accelerated healing of the defects in a dose-dependent manner. Thus the CLF hydrogel is a promising delivery system of growth factors for bone regeneration.

Differentiated adipose-derived stem cell cocultures for bone regeneration in polymer scaffolds in vivo.

Critical-sized bone defects can lead to significant morbidity, and interventions are limited by the availability and donor-site morbidity of bone grafts. Polymer scaffolds seeded with cells have been explored to replace bone grafts. Adipose-derived stem cells have shown great promise for vascularization and osteogenesis of these constructs, and cocultures of differentiated stem cells are being explored to augment vessel and bone formation. Adipose-derived stem cells were differentiated into endothelial cells and osteoblasts, and in vitro studies showed increased proliferation of cocultured cells compared with undifferentiated adipose-derived stem cells and monocultures of endothelial cells and osteoblasts. The cells were seeded into polylactic acid gas-plasma-treated scaffolds as cocultures and monocultures and then implanted into critical-sized rat calvarial defects. The cocultures were in a 1:1 osteoblast to endothelial cell ratio. The increase in proliferation seen by the cocultured cells in vitro did not translate to increased vascularization and osteogenesis in vivo. In vivo, there were trends of increased vascularization in the endothelial cell group and increased osteogenesis in the osteoblast and endothelial monoculture groups, but no increase was seen in the coculture group compared with the undifferentiated adipose-derived stem cells. Endothelial cells enhance vascularization and osteoblast and endothelial cell monocultures enhance bone formation in the polymer scaffold. Predifferentiation of adipose-derived stem cells is promising for improving vascularization and osteogenesis in polymer scaffolds but requires future evaluation of coculture ratios to fully characterize this response.

Caspase-2 maintains bone homeostasis by inducing apoptosis of oxidatively-damaged osteoclasts.

Osteoporosis is a silent disease, characterized by a porous bone micro-structure that enhances risk for fractures and associated disabilities. Senile, or age-related osteoporosis (SO), affects both men and women, resulting in increased morbidity and mortality. However, cellular and molecular mechanisms underlying senile osteoporosis are not fully known. Recent studies implicate the accumulation of reactive oxygen species (ROS) and increased oxidative stress as key factors in SO. Herein, we show that loss of caspase-2, a cysteine aspartate protease involved in oxidative stress-induced apoptosis, results in total body and femoral bone loss in aged mice (20% decrease in bone mineral density), and an increase in bone fragility (30% decrease in fracture strength). Importantly, we demonstrate that genetic ablation or selective inhibition of caspase-2 using zVDVAD-fmk results in increased numbers of bone-resorbing osteoclasts and enhanced tartrate-resistant acid phosphatase (TRAP) activity. Conversely, transfection of osteoclast precursors with wild type caspase-2 but not an enzymatic mutant, results in a decrease in TRAP activity. We demonstrate that caspase-2 expression is induced in osteoclasts treated with oxidants such as hydrogen peroxide and that loss of caspase-2 enhances resistance to oxidants, as measured by TRAP activity, and decreases oxidative stress-induced apoptosis of osteoclasts. Moreover, oxidative stress, quantified by assessment of the lipid peroxidation marker, 4-HNE, is increased in Casp2-/- bone, perhaps due to a decrease in antioxidant enzymes such as SOD2. Taken together, our data point to a critical and novel role for caspase-2 in maintaining bone homeostasis by modulating ROS levels and osteoclast apoptosis during conditions of enhanced oxidative stress that occur during aging.

Femoral suspension devices for anterior cruciate ligament reconstruction: do adjustable loops lengthen?

BACKGROUND: Cortical suspension devices are commonly used for femoral graft fixation during anterior cruciate ligament (ACL) reconstructive surgery. Adjustable-length fixation devices provide technical advantages over fixed-length loops but may be more susceptible to lengthening during cyclic loading. HYPOTHESIS: Both fixed-length and adjustable-length femoral cortical suspension devices would withstand ultimate loads greater than those normally experienced by the native ACL and would prevent clinically significant lengthening during prolonged cyclic loading. STUDY DESIGN: Controlled laboratory study. METHODS: Mechanical testing was performed on 3 ACL graft cortical suspensory devices by use of an extended cyclic loading (4500 cycles at 10-250 N) and pull-to-failure protocol. Two adjustable-length devices were additionally tested with the free suture ends tied. RESULTS: Total displacement after 4500 cycles of tensioning at variable loads (expressed as mean ± SD) was 42.45 mm (±7.01 mm) for the Arthrex TightRope RT, 5.76 mm (±0.35 mm) for the Biomet ToggleLoc, and 1.34 mm (±0.03 mm) for the Smith & Nephew EndoButton CL Ultra (P < .001). The Arthrex TightRope reached clinical failure of 3 mm lengthening after fewer cycles (1349 ± 316) than the Biomet ToggleLoc (2576 ± 73) (P < .001). The Smith & Nephew EndoButton did not reach clinical failure during cyclic testing. With the free suture ends tied, after 4500 cycles, the Arthrex TightRope had a significant decrease in lengthening to 13.36 ± 1.86 mm (P < .037) There was also a significant difference in ultimate load between the TightRope (809.11 ± 52.94 N) and the other 2 constructs (P < .001). CONCLUSION: The ultimate load of all graft-fixation devices exceeded the forces likely to be experienced in a patient's knee during the early postoperative rehabilitation period. However, the adjustable-length fixation devices experienced a clinically significant increase in loop lengthening during cyclic testing. This lengthening is partially caused by suture slippage into the adjustable-length loop. CLINICAL RELEVANCE: Adjustable-length ACL graft cortical suspension devices lengthen under cyclic loads because free suture ends are pulled into the adjustable loop. This may allow for graft-fixation device lengthening during the acute postoperative period.

Injectable reactive biocomposites for bone healing in critical-size rabbit calvarial defects.

Craniofacial injuries can result from trauma, tumor ablation, or infection and may require multiple surgical revisions. To address the challenges associated with treating craniofacial bone defects, an ideal material should have the ability to fit complex defects (i.e. be conformable), provide temporary protection to the brain until the bone heals, and enhance tissue regeneration with the delivery of biologics. In this study, we evaluated the ability of injectable lysine-derived polyurethane (PUR)/allograft biocomposites to promote bone healing in critical-size rabbit calvarial defects. The biocomposites exhibited favorable injectability, characterized by a low yield stress to initiate flow of the material and a high initial viscosity to minimize the adverse phenomena of extravasation and filter pressing. After injection, the materials cured within 10-12 min to form a tough, elastomeric solid that maintained mechanical integrity during the healing process. When injected into a critical-size calvarial defect in rabbits, the biocomposites supported ingrowth of new bone. The addition of 80 µg mL(-1) recombinant human bone morphogenetic protein-2 (rhBMP-2) enhanced new bone formation in the interior of the defect, as well as bridging of the defect with new bone. These observations suggest that injectable reactive PUR/allograft biocomposites are a promising approach for healing calvarial defects by providing both mechanical stability as well as local delivery of rhBMP-2.

Effect of adipose tissue-derived osteogenic and endothelial cells on bone allograft osteogenesis and vascularization in critical-sized calvarial defects.

The use of processed bone allograft to repair large osseous defects of the skull has been limited, given that it lacks the osteogenic cellularity and intrinsic vascular supply which are essential elements for successful graft healing and, at the same time, the areas to be targeted through tissue-engineering applications. In this study, we investigated the effect of predifferentiated rat adipose tissue-derived osteoblastic cells (OBs) and endothelial cells (ECs) on calvarial bone allograft healing and vascularization using an orthotopic critical-sized calvarial defect model. For this purpose, thirty-seven 8 mm critical calvarial defects in Lewis rats were treated with bone allografts seeded with no cells, undifferentiated adipose tissue-derived stem cells (ASC), OBs, ECs, and OBs and ECs simultaneously. After 8 weeks, the bone volume and mineral density were calculated using microcomputed tomography and the microvessel formation using immunohistochemical staining and imaging software. The amount of bone within the 8 mm defect was significantly higher for the allografts treated with ECs compared with the allografts treated with OBs (p=0.05) and simultaneously with the two cell lineages (p=0.02). There were no significant differences in bone formation between the latter two groups and the control groups (allografts treated with no cells and undifferentiated ASC). There were no significant differences in bone mineral density among the groups. The amount of microvessels was significantly higher in the group treated with ECs relative to all groups (p=< 0.05). Our results show that the implantation of ASC-derived ECs improves the vascularization of calvarial bone allografts at 8 weeks after treatment. This cell-based vascularization strategy can be used to improve the paucity of perfusion in allogenic bone implants. However, in this study, the treatment of allografts with OBs alone or in combination with ECs did not support bone formation or vascularization.