Simple and biodegradable mesoporous silica nanocarriers for enhancing antitumor therapy through photochemical synergism.

The biosafety and degradability of nanocarriers have always been an important factor restricting their entry into the clinic. In this work, a new nano-system was prepared by coating the photothermal effect of dopamine-doped mesoporous silica nanoparticles with carboxymethyl chitin through electrostatic interaction, and is further anchored with folic acid on the surface for targeted delivery of anti-cancer the drug doxorubicin (DOX). The nano-system (DOX@PDA/MSN-CMCS-FA) is simply modified CMCS after being loaded with DOX and has good dispersibility, and the drug loading is 10.6%. In vitro release studies have shown that the release rate of PDA/MSN-CMCS-FA is 40% in pH 5.5. Effective degradation is debris in 14 d acidic environments. Due to the anti-infrared photothermal effects of PDA doping and DOX chemotherapy, the semi-lethal concentration (IC50) of nanoparticles (NPS) was 14.95 µg/mL, which can inhibit tumor cell growth by photochemical synergistic treatment, and have certain degradation performance.

Smart Protein-Based Fluorescent Nanoparticles Prepared by a Continuous Nanoprecipitation Method for Pesticides' Precise Delivery and Tracing.

It is highly desirable to develop smart and green pesticide nanoformulations for improving pesticide targeting and reducing their inherent toxicity. Herein, we demonstrate a continuous nanoprecipitation method to construct a novel type of enzyme-responsive fluorescent nanopesticides (denoted as ABM@BSA-FITC/GA NPs) based on abamectin, fluorescein isothiocyanate isomer (FITC)-modified protein, and food-grade gum arabic. The as-prepared ABM@BSA-FITC/GA NPs exhibit good water dispersibility, excellent storage stability, and enhanced wettability compared to commercial formulations. The controlled release of pesticides can be achieved through protein degradation caused by trypsin. Most importantly, the deposition, distribution, and transport of the ABM@BSA-FITC/GA NPs are precisely tracked on target plants (cabbage and cucumber) by fluorescence. Furthermore, the ABM@BSA-FITC/GA NPs show the high control efficacy against Plutella xylostella L., which is comparable with commercial emulsifiable concentrate formulation. In consideration of its eco-friendly composition and absence of organic solvent, this pesticide nanoformulation has promising potential in sustainable plant protection.

Ultrasmall Pt Nanozymes Immobilized on Spherical Polyelectrolyte Brushes with Robust Peroxidase-like Activity for Highly Sensitive Detection of Cysteine.

Distinct platinum (Pt) nanozymes as peroxidase mimics have received extensive interest owing to their outstanding catalytic activity, high environmental tolerance, lower consumption, and great potential in replacing natural enzymes. However, easy agglomeration of Pt nanoparticles (Pt NPs) resulting from the high surface free energy significantly decrease their peroxidase-like activity. Herein, spherical polyelectrolyte brush (SPB)-stabilized ultrasmall Pt NPs (SPB@Pt NPs) were prepared by a novel synthetic strategy where the SPB not only performed as a nanoreactor for the synthesis of ultrasmall Pt NPs but also greatly stabilized Pt NPs against aggregation. The well-defined SPB@Pt NP nanozymes exhibited outstanding peroxidase-like activity for the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB and were then used to establish a colorimetric sensor for rapid detection of cysteine, giving a limit of detection of 0.11 µM. Moreover, the colorimetric detection system was demonstrated with outstanding performance in sensitive and selective detection of cysteine in the presence of several interference molecules. From these results, SPB@Pt NPs have been regarded as promising peroxidase mimics for a large number of applications such as in biosensing, biomedicine, the food industry, and environmental chemistry.

Structural and Electronic Modulation of Iron-Based Bimetallic Metal-Organic Framework Bifunctional Electrocatalysts for Efficient Overall Water Splitting in Alkaline and Seawater Environment.

Metal-organic frameworks (MOFs) are considered potential electrocatalysts for efficient water splitting. However, the structure-activity relationship of most MOFs is not systematically analyzed for electrocatalysis for anodes and cathodes. In this paper, we provide a strategy to modulate the electronic microstructure of iron-based bimetallic MOFs (MFe-BDC (M: Mg, Zn, Cd)) grown on the nickel foam (NF) as bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The optimal bimetallic CdFe-BDC via modulating appropriate metal cations of IIA and IIB possesses excellent OER and HER performance with the lowest overpotentials of 290 mV at 100 mA cm-2 and 148 mV at 10 mA cm-2, respectively. The overall water splitting performance of the as-prepared CdFe-BDC requires 1.68 V to achieve a current density of 10 mA cm-2 in the real seawater media, and it exhibits the competitive H2 and O2 production rates of 6.4 and 3.1 µL s-1, respectively, in ambient alkaline conditions, suggesting its potential practical applications. Density functional theory (DFT) calculations demonstrate the relationship between microstructure and electrocatalytic performance of bimetallic MFe-BDC. This work emphasizes the significance of tailoring the electronic microstructure of bimetallic MOFs for efficient overall water splitting in alkaline and seawater environment.

Scalable Manufacture of Curcumin-Loaded Chitosan Nanocomplex for pH-Responsive Delivery by Coordination-Driven Flash Nanocomplexation.

Metal coordination-driven nanocomplexes are known to be responsive to physiologically relevant stimuli such as pH, redox, temperature or light, making them well-suited for antitumor drug delivery. The ever-growing demand for such nanocomplexes necessitates the design of a scalable approach for their production. In this study, we demonstrate a novel coordination self-assembly strategy, termed flash nanocomplexation (FNC), which is rapid and efficient for the fabrication of drug-loaded nanoparticles (NPs) in a continuous manner. Based on this strategy, biocompatible chitosan (CS) and Cu2+ can be regarded anchors to moor the antitumor drug (curcumin, Cur) through coordination, resulting in curcumin-loaded chitosan nanocomplex (Cur-loaded CS nanocomplex) with a narrow size distribution (PDI < 0.124) and high drug loading (up to 41.75%). Owing to the excellent stability of Cur-loaded CS nanocomplex at neutral conditions (>50 days), premature Cur leakage was limited to lower than 1.5%, and pH-responsive drug release behavior was realized in acidic tumor microenvironments. An upscaled manufacture of Cur-loaded CS nanocomplex is demonstrated with continuous FNC, which shows an unprecedented method toward practical applications of nanomedicine for tumor therapy. Furthermore, intracellular uptake study and cytotoxicity experiments toward H1299 cells demonstrates the satisfied anticancer efficacy of the Cur-loaded CS nanocomplex. These results confirm that coordination-driven FNC is an effective method that enables the rapid and scalable fabrication of antitumor drugs.

Long circulation and tumor-targeting biomimetic nanoparticles for efficient chemo/photothermal synergistic therapy.

Photothermal therapy combined with chemotherapy based on nanomedicine has been considered a promising strategy for improving therapeutic efficacy in a tumor. However, nanomedicine can be easily cleared by the immune system without specific surface engineering modifications, thus affecting the ultimate efficacy. Herein, multifunctional biomimetic nanoparticles (Bio-RBCm@PDA@MSN-DOX) with enhanced long circulation and targeting ability are constructed by coating large pore-sized mesoporous silica (MSN) with polydopamine (PDA) layers in a biotin modified red blood cell membrane (Bio-RBCm) for efficient chemo/photothermal synergistic therapy. It is demonstrated that Bio-RBCm@PDA@MSN-DOX presents high photothermal conversion efficiency (40.17%) and enhanced capability to accelerate the release of the anticancer drug (doxorubicin, DOX), thus showing a good synergistic therapeutic effect in cell experiments. More importantly, with the assistance of the biotin and RBC membrane, Bio-RBCm@PDA@MSN-DOX can successfully evade immune clearance and effectively target transport to HeLa tumor sites, finally accomplishing up to 98.95% tumor inhibition with negligible side effects to normal tissues. This multilayer structure presents a valuable model for future therapeutic applications with safe and effective tumor chemotherapy and photothermal therapy.

Complex supramolecular fiber formed by coordination-induced self-assembly of benzene-1,3,5-tricarboxamide (BTA).

HYPOTHESIS: In the quest for large but well-controlled supramolecular structures, the discotic benzene-1,3,5-tricarboxamide (BTA) has received quite some attention, because it can form hydrogen-bonded stacks that can be regarded as supramolecular polymers of which the single BTA molecule is the monomer. In this report, we consider a more complex BTA-based supramolecular polymer, namely one that is built up from supramolecular 'monomers'. EXPERIMENTS: We design a tris-ligand L3 consisting of a BTA core carrying three dipicolinic acid (DPA) groups. L3 itself is too small to form polymers, but in the presence of appropriate metal ions, each L3 can form three coordination bonds and so form (L3)n clusters that are large enough to stack successfully: at an appropriate metal dose, long and stable filaments with a cross-sectional diameter of 12 nm appear. We monitor the growth process by UV-vis spectroscopy and light scattering, and use small angle X-ray scattering (SAXS), TEM as well as molecular simulation to confirm the filamentous structure of the fibers and determine their dimensions. FINDINGS: The formation and structure of the fiber are very similar for various transition metal ions, which enables introducing different functionalities, e.g., magnetic relaxivity, by proper choice of the metal ions. Hence, we obtain a doubly supramolecular polymer, connected axially by hydrogen bonds, and radially by coordination bonds. Not only does this realize a higher level of complexity, but it also allows to easily introduce and vary metal-derived functionalities.

Dual-Functionalized Crescent Microgels for Selectively Capturing and Killing Cancer Cells.

In cancer therapy, the selective targeting of cancer cells while avoiding side effects to normal cells is still full of challenges. Here, we developed dual-functionalized crescent microgels, which selectively captured and killed lung cancer cells in situ without killing other cells. Crescent microgels with the inner surface of the cavity functionalized with antibody and containing glucose oxidase (GOX) in the gel matrix have been produced in a microfluidic device. These microgels presented high affinity and good selectivity to lung cancer cells and retained them inside the cavities for extended periods of time. Exposing the crescent hydrogels to physiological concentrations of glucose leads to the production of a locally high concentration of H2 O2 inside the microgels' cavities, due to the catalytic action by GOX inside the gel matrix, which selectively killed 90 % cancer cells entrapped in the microgel cavities without killing the cells outside. Our strategy to create synergy between different functions by incorporating them in a single microgel presents a novel approach to therapeutic systems, with potentially broad applications in smart materials, bioengineering and biomedical fields.

A mussel-inspired carboxymethyl cellulose hydrogel with enhanced adhesiveness through enzymatic crosslinking.

In order to replace conventional sutures in wound closing applications, favorable hydrogels with strong wet tissue adhesion and biocompatibility have attracted considerable attention. Herein, inspired by mussel adhesive protein, a series of dopamine modified carboxymethyl cellulose (CMC-DA) hydrogels were prepared in situ using enzymatic crosslinking in the presence of horseradish peroxidase (HRP) and H2O2. The biomimetic CMC-DA hydrogel exhibited about 6-fold enhanced wet tissue adhesion strength (28.5 kPa) over the commercial fibrin glue. In addition, the gelation time, swelling ratio and rheological property of the hydrogel can be simply controlled by changing the concentrations of HRP, H2O2, and CMC-DA polymer. The gels also exhibited good biodegradation and biocompatibility in vitro. The overall results show that the CMC-DA hydrogel with enhanced wet adhesiveness will be a promising tissue adhesive material.

A Supramolecular Crosslinker To Give Salt-Resistant Polyion Complex Micelles and Improved MRI Contrast Agents.

Three-component mixtures (diblock copolymer/metal ion/oligoligand) can assemble into micellar particles owing to a combination of supramolecular polymerization and electrostatic complex formation. Such particles cover a large range of compositions, but the electrostatic forces keeping them together make them rather susceptible to disintegration by added salt. Now it is shown how the salt stability can be tuned continuously by employing both a bis-ligand and a tris-ligand, and varying the ratio of these in the mixture. For magnetic ions such as MnII and FeIII , the choice of the multiligand also affects the ion/water interaction and, hence, the magnetic relaxivity. As an example, MnII -based nanoparticles with a very high longitudinal relaxivity (10.8 mm-1 s-1 ) were investigated that are not only biocompatible but also feature strong contrast enhancement in target organs (liver, kidney), as shown by T1 -weighted in vivo magnetic resonance imaging (MRI).

Morphology Tuning of Aggregation-Induced Emission Probes by Flash Nanoprecipitation: Shape and Size Effects on in Vivo Imaging.

Aggregation-induced emission (AIE) imaging probes have recently received considerable attention because of their unique property of high performance in the aggregated state and their imaging capability. However, the tendency of AIE molecules to aggregate into micron long irregular shapes, which significantly limits their application in vivo, is becoming a serious issue that needs to be addressed. Here, we introduce a novel engineering strategy to tune the morphology and size of AIE nanoaggregates, based on flash nanoprecipitation (FNP). Quinolinemalononitrile (ED) is encapsulated inside properly selected amphiphilic block copolymers of varying concentration. This leads to a variety of ED particle morphologies with different sizes. The shape and size are found to have strong influences on tumor targeting both in vitro and in vivo. The current results therefore indicate that the FNP method together with optimal choice of an amphiphilic copolymer is a universal method to systematically control the aggregation state of AIE materials and hence tune the morphology and size of AIE nanoaggregates, which is potentially useful for precise imaging at specific tumor sites.

Fabrication of Charge-Conversion Nanoparticles for Cancer Imaging by Flash Nanoprecipitation.

Traditional charge-conversion nanoparticles (NPs) need the breakage of acid-labile groups on the surface, which impedes the rapid response to the acidic microenvironment. Here, we developed novel rodlike charge-conversion NPs with amphiphilic dextran- b-poly(lactic- co-glycolic acid), poly(2-(dimethylamino) ethylmethylacrylate)- b-poly(ε-caprolactone), and an aggregation-induced emission-active probe through flash nanoprecipitation (FNP). These NPs exhibit reversible negative-to-positive charge transition at a slightly acidic pH relying on the rapid protonation/deprotonation of polymers. The size and the critical charge-conversion pH can be further tuned by varying the flow rate and polymer ratio. Consequently, the charge conversion endows NPs with resistance to protein adsorption at physiological pH and enhanced internalization to cancer cells under acidic conditions. Ex vivo imaging on harvest organs shows that charge-conversion NPs were predominantly distributed in tumors after intravenous administration to mice due to the robust response of NPs to the acidic microenvironment in tumor tissue, whereas control NPs or free probes were broadly accumulated in tumor, liver, kidney, and lung. These results suggest the great potential of the current FNP strategy in the facile and generic fabrication of charge-conversion NPs for tumor-targeting delivery of drugs or fluorescent probes.

UV-Triggered Surface-Initiated Polymerization from Colorless Green Tea Polyphenol-Coated Surfaces.

A facile and versatile approach to constructing colorless surface coatings based on green tea polyphenols is reported, which can further act as a photoinitiating layer to initiate radical polymerization. These colorless green tea polyphenol coatings are capable of successfully photografting polymer brushes, and the resulting polymer brush patterns show spatial shape adjustability by masked UV irradiation. Both surface modifications and photografted polymer brushes do not alter the original color of the substrates. This method could be promising for the development of surface modifications.

Antibacterial activity of graphene supported FeAg bimetallic nanocomposites.

We report the simple one pot synthesis of iron-silver (FeAg) bimetallic nanoparticles with different compositions on graphene support. The nanoparticles are well dispersed on the graphene sheet as revealed by the TEM, XRD, and Raman spectra. The antibacterial activity of graphene-FeAg nanocomposite (NC) towards Bacillus subtilis, Escherichia coli, and Staphylococcus aureus was investigated by colony counting method. Graphene-FeAg NC demonstrates excellent antibacterial activity as compared to FeAg bimetallic without graphene. To understand the antibacterial mechanism of the NC, oxidative stress caused by reactive oxygen species (ROS) and the glutathione (GSH) oxidation were investigated in the system. It has been observed that ROS production and GSH oxidation are concentration dependent while the increase in silver content up to 50% generally enhances the ROS production while ROS decreases on further increase in silver content. Graphene loaded FeAg NC demonstrates higher GSH oxidation capacity than bare FeAg bimetallic nanocomposite. The mechanism study suggests that the antibacterial activity is probably due to membrane and oxidative stress produced by the nanocomposites. The possible antibacterial pathway mainly includes the non-ROS oxidative stress (GSH oxidation) while ROS play minor role.

Efficient degradation of trichloroethylene in water using persulfate activated by reduced graphene oxide-iron nanocomposite.

Graphene oxide (GO) and nano-sized zero-valent iron-reduced graphene oxide (nZVI-rGO) composite were prepared. The GO and nZVI-rGO composite were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), energy-dispersive spectroscopy (EDS), and Raman spectroscopy. The size of nZVI was about 6 nm as observed by TEM. The system of nZVI-rGO and persulfate (PS) was used for the degradation of trichloroethylene (TCE) in water, and showed 26.5% more efficiency as compared to nZVI/PS system. The different parameters were studied to determine the efficiency of nZVI-rGO to activate the PS system for the TCE degradation. By increasing the PS amount, TCE removal was also improved while no obvious effect was observed by varying the catalyst loading. Degradation was decreased as the TCE initial concentration was increased from 20 to 100 mg/L. Moreover, when initial solution pH was increased, efficiency deteriorated to 80%. Bicarbonate showed more negative effect on TCE removal among the solution matrix. To better understand the effects of radical species in the system, the scavenger tests were performed. The •SO4(-) and •O2(-) were predominant species responsible for TCE removal. The nZVI-rGO-activated PS process shows potential applications in remediation of highly toxic organic contaminants such as TCE present in the groundwater. Graphical abstract Persulfate activated by reduced graphene oxide and nano-sized zero-valent iron composite can be used for efficient degradation of trichloroethylene (TCE) in water.