The Preparation and Wear Behaviors of Phenol-Formaldehyde Resin/BN Composite Coatings.

Phenolic-matrix composites possess excellent synergistic effects on mechanical and tribological properties and can be used in the aerospace, medical, and automobile industries. In this work, a series of phenol-formaldehyde resin/hexagonal boron nitride nanocomposites (PF/BNs) were in situ synthesized using an easy method. PF/BN coatings (PF/BNCs) on 316L steels were prepared through a spin-casting method. The wear behaviors of these PF/BNCs were investigated by dry sliding with steel balls. The percentage of BN, the thickness of the coating, and the heat treatment temperature affected the coefficients of friction (COFs) and wear rates of these coatings. After heat treatment at 100 °C, the tribological properties of the PF/BNCs were remarkably improved, which might be attributed to both the transformation of carbon on the worn surfaces from C-O/C=O into C=N, carbide, and other chemical bonds and the cross-linking of the prepolymers.

Generation of qualified clinical-grade functional hepatocytes from human embryonic stem cells in chemically defined conditions.

Hepatocytes have been successfully generated from human pluripotent stem cells (hPSCs). However, the cost-effective and clinical-grade generation of hepatocytes from hPSCs still need to be improved. In this study, we reported the production of functional hepatocytes from clinical-grade human embryonic stem cells (hESCs) under good manufacturing practice (GMP) requirements. We sequentially generated primitive streak (PS), definitive endoderm (DE), hepatoblasts and hepatocyte-like cells (HLCs) from hESCs in the different stages with completely defined reagents. During hepatoblast differentiation, dimethyl sulfoxide (DMSO), transferrin, L-ascorbic acid 2-phosphate sesquimagnesium salt hydrate (Vc-Mg), insulin, and sodium selenite were used instead of cytokines and FBS/KOSR. Then, hepatoblasts were differentiated into HLCs that had a typical hepatocyte morphology and possessed characteristics of mature hepatocytes, such as metabolic-related gene expression, albumin secretion, fat accumulation, glycogen storage, and inducible cytochrome P450 activity in vitro. HLCs integrated into the livers of Tet-uPA Rag2-/- Il2rg-/- (URG) mice, which partially recovered after transplantation. Furthermore, a series of biosafety-related experiments were performed to ensure future clinical applications. In conclusion, we developed a chemically defined system to generate qualified clinical-grade HLCs from hESCs under GMP conditions. HLCs have been proven to be safe and effective for treating liver failure. This efficient platform could facilitate the treatment of liver diseases using hESC-derived HLCs transplantation.

[Study on the phenomenon of splashes and sprays from virology].

OBJECTIVE: To investigate the phenomenon of accidental splashes and sprays from manipulation of recombinant virus material and to measure the approximate spilled distance when recombinant virus material inadvertently dropped in the biosafety laboratory. METHODS: first, two groups owning different experience simulated the course of accidental spills and splashes by recombinant adenovirus (rADV) which expressed green fluorescence protein (GFP), the GFP signal were observed in 96 well cell plate after spills appeared; Second, the routine two heights (75 cm and 110 cm) and capacity (1 ml, 1.5 ml, 4 ml and 8 ml) of virus were chose to simulate the experiment of unexpected dropping. RESULTS: First, the positive quantity of the first group owning 5 years' experience is much less than the second group owning 2 years' work experience, the former was 7 positive wells, the latter was 81 positive when they used the pipette to operation. Second, when the unclosed test tubes (1 ml, 1.5 ml, 4 ml and 8 ml recombinant virus) inadvertently dropped, the largest spill distance was 0.92 m, 1.57 m, 2.63 m and2.68 m respectively. CONCLUSION: The better experience is important to make sure safety when we make infectious material; the contaminated distance increased with the amount of recombinant virus material.

[Investigating the risk of two model virus in the laboratory].

OBJECTIVE: To study the survival time of recombination rival in environment and inactivation ability of different disinfectant and ultraviolet radiation against virus. METHODS: NC membranes absorbed the recombinant adenovirus (rADV) or herpes simplex virus (rHSV) with green fluorescence protein (GFP) were laid, or immersed in various concentration of different disinfectants such as ethanol, sodium hypochlorite, lysol and geramine and then taked out them every 15 min, or exposed under ultraviolet radiation, then the NC membranes were adsorbed 1 h in cell, 37 degrees C 5% CO2 48 h. The results were observed under the fluorescence microscope. RESULTS: (1) the average survival time of rHSV under environment is less than 60 min, rADV is almost up to 2 h. (2) The infection ability of rHSV and rADV was inactived 15 min by both ethanol (100%, 70% and 50%) and sodium hypochlorite (5%, 2.5% and 1.25%). (3) Two virus can be killed by 0.1% bromogeramine. (4) Both 5% and 2.5% lysol, but rADV can not lost the infection on Vero Cell until 75 min by 1.25% Lysol. (5) The rHSV was inactivated under ultraviolet radiation, but rADV was not. CONCLUSION: The survival time of is different from both envelope rival and the no-envelope viral under nature environment and the inactivate ability of disinfectant also is different between two model virus; Disinfectant should be choose according to virus type.