Accuracy and influencing factors of maxillary and mandibular repositioning using pre-bent locking plates: a prospective study.

In-house repositioning methods based on three-dimensional (3D)-printing technology and the use of pre-bent plates has been gaining popularity in orthognathic surgery. However, there remains room for further improvement in methods and investigations on clinical factors that affect accuracy. This single-centre, prospective study included 34 patients and aimed to evaluate the accuracy and factors influencing maxillary and mandibular repositioning using pre-bent locking plates. The plates were manually pre-bent on the 3D-printed models of the planned position, and their hole positions were scanned and reproduced intraoperatively with osteotomy guides. The accuracy of repositioning and plate-hole positioning was calculated in three axes with the set landmarks. The following clinical factors that affect repositioning accuracy were also verified: deviation of the plate-hole positioning, amount of planned movement, and amount of simulated bony interference. The median deviations of the repositioning and hole positioning between the preoperative plan and postoperative results were 0.26 mm and 0.23 mm, respectively, in the maxilla, and 0.69 mm and 0.36 mm, respectively, in the mandible, suggesting that the method was highly accurate, and the repositioning concept based on the plate hole and form matching was more effective in the maxilla. Results of the correlation test suggest that large amounts of bony interference and plate-hole positioning errors in the up/down direction could reduce mandibular repositioning accuracy.

A Novel Orthognathic Surgery With a Half-Millimeter Accuracy for the Maxillary Positioning Using Prebent Plates and Computer-Aided Design and Manufacturing Osteotomy Guide.

This retrospective study aimed to assess the accuracy of prebent plates and computer-aided design and manufacturing osteotomy guide for orthognathic surgery. The prebent plates correspondent to the planning model were scanned with a 3-dimensional printed model for guide design and used for fixation. Forty-two patients who underwent bimaxillary orthognathic surgery using computer-aided design and manufacturing intermediate splint with the guide (guided group: 20 patients) or with conventional fixation under straight locking miniplates (SLMs) technique (SLM group: 20 patients) were analyzed. A deviation of the maxilla between the planned and postoperative positions was evaluated using computed tomography, which was taken 2 weeks before and 4 days after the surgery. The surgery time and the infraorbital nerve paranesthesia were also evaluated. The mean deviations in the mediolateral ( x ), anteroposterior ( y ), and vertical directions ( z ) were 0.25, 0.50, and 0.37 mm, respectively, in the guided group, while that in the SLM group were 0.57, 0.52, and 0.82 mm, respectively. There were significant differences in x and z coordinates ( P <0.001). No significant difference in the surgery duration and paranesthesia was seen, suggesting the present method offers a half-millimeter accuracy for the maxillary repositioning without increasing the risk of extending surgery duration and nerve complication.

Bone beads enveloped with vascular endothelial cells for bone regenerative medicine.

The transplantation of pre-vascularized bone grafts is a promising strategy to improve the efficacy of engraftment and bone regeneration. We propose a hydrogel microbead-based approach for preparing vascularized and high-density tissue grafts. Mesenchymal stem cell-encapsulated collagen microgels (2 µL), termed bone beads, were prepared through spontaneous constriction, which improved the density of the mesenchymal stem cells and collagen molecules by more than 15-fold from the initial day of culture. Constriction was attributed to cell-attractive forces and involved better osteogenic differentiation of mesenchymal stem cells than that of spheroids. This approach was scalable, and ∼2000 bone beads were prepared semi-automatically using a liquid dispenser and spinner flask. The mechanical stimuli in the spinner flask further improved the osteogenic differentiation of the mesenchymal stem cells in the bone beads compared with that in static culture. Vascular endothelial cells readily attach to and cover the surface of bone beads. The in vitro assembly of the endothelial cell-enveloped bone beads resulted in microchannel formation in the interspaces between the bone beads. Significant effects of endothelialization on in vivo bone regeneration were shown in rats with cranial bone defects. The use of endothelialized bone beads may be a scalable and robust approach for treating large bone defects. STATEMENT OF SIGNIFICANCE: A unique aspect of this study is that the hMSC-encapsulated collagen microgels were prepared through spontaneous constriction, leading to the enrichment of collagen and cell density. This constriction resulted in favorable microenvironments for the osteogenic differentiation of hMSCs, which is superior to conventional spheroid culture. The microgel beads were then enveloped with vascular endothelial cells and assembled to fabricate a tissue graft with vasculature in the interspaces among the beads. The significant effects of endothelialization on in vivo bone regeneration were clearly demonstrated in rats with cranial bone defects. We believe that microgel beads covered with vascular endothelial cells provide a promising approach for engineering better tissue grafts for bone-regenerative medicine.

Endoscopically-assisted intraoral resection of osteochondroma of the mandibular condyle with a piezoelectric surgical device.

Background: Osteochondromas of the mandibular condyle show facial asymmetry and malocclusion. Because condylar osteochondromas are generally resected in a preauricular approach with risks of facial nerve injury and visible scar, the authors report endoscopically assisted intraoral resection of osteochondroma of the mandibular condyle with a piezoelectric surgical device.Case presentation: A 38-year-old woman presented with malocclusion and facial asymmetry caused by deviation of the chin to the left. Computed tomography showed a hyperdense, well-circumscribed mass arising from the medial aspect of the right mandibular condyle with resorption of the skull base. The patient underwent an endoscopically-assisted intraoral condylectomy with a piezoelectric surgical device. The postoperative course was uneventful without trismus, malocclusion, or facial asymmetry, and there was no recurrence 4 years after surgery.Conclusion:Endoscopically assisted intraoral resection of osteochondroma of the mandibular condyle with a piezoelectric surgical device is a minimally invasive and safe surgery.

Schwannoma arising from the sublingual glandular branch of the lingual nerve radiologically masquerading as sublingual gland tumor.

We report a rare case of schwannoma arising from the sublingual glandular branch of the lingual nerve radiologically masquerading as sublingual gland tumor. A 42-year-old female was referred to our department with a painless swelling in the left submandibular region. Contrast-enhanced computed tomography showed a well-circumscribed, heterogeneous low-density tumor with cystic change in the left sublingual region. Magnetic resonance imaging showed a well-circumscribed, heterogeneous sublingual tumor with low-signal intensity on T1-weighted image and high-signal intensity in T2-weighted image. The lesion was diagnosed radiologically as benign sublingual gland tumor. The patient underwent resection of sublingual gland tumor under general anesthesia. There was no definitive continuity between the tumor and the sublingual gland, and the tumor originated from sublingual glandular branch of the lingual nerve. Pathological examination of the specimen showed schwannoma with highly cellular areas (Antoni A) and hypocellular areas (Antoni B). The postoperative course was uneventful without lingual nerve palsy, and there was no recurrence 4 years after surgery.

Sentinel lymph node mapping of clinically N0 early oral cancer: a diagnostic pitfall on CT lymphography.

OBJECTIVE: The purpose of this study was to reevaluate preoperative computed tomography lymphography (CTL) and enhanced CT images during follow-up to clarify whether SLNs enhanced by CTL were identified accurately before primary surgery with sentinel lymph node biopsy (SLNB) for clinically N0 early oral cancer. METHODS: Thirty two early oral cancer patients without cervical lymph node metastasis were enrolled in this study. To clarify whether SLNs enhanced by CTL were identified accurately before primary surgery with SLNB, we reevaluated preoperative CTL and enhanced CT images during follow-up in all patients. RESULTS: SLNs were detected by CTL in 31 of 32 patients (96.9%). During follow-up after primary surgery with SLNB, 4 of 27 patients without SLN metastasis had occult neck metastasis. Of the 4 patients, only 1 patient with cancer of floor of the mouth had overlooking of SLN, and the overlooking rate of SLN was 3.1%. The overlooked small SLN (2.9 × 3.3 × 3.1 mm) was located at contralateral level IB. The CT numbers before, 2, 5, 10 min after iopamidol injection, were 33 HU, 37 HU, 62 HU, 52 HU, respectively. The CT numbers of overlooked SLN 5 and 10 min after the injection was higher than CT images scanned before the iopamidol injection. CONCLUSIONS: The enhancement of SLNs in CTL images after iopamidol injection should be compared sufficiently with CT images before iopamidol injection to avoid overlooking of SLNs in N0 early oral cancer.

Actinomycotic osteomyelitis with proliferative periostitis arising in the mandibular ramus: an unusual case with spontaneous bone regeneration after coronoidectomy.

Actinomycotic osteomyelitis is an aggressive and persistent disease capable of invading and destroying bone, and chronic osteomyelitis with proliferative periostitis represents new bone formation with periosteal reaction. We report a rare case of actinomycotic osteomyelitis with proliferative periostitis arising in the mandibular ramus and spontaneous bone regeneration after coronoidectomy. A 14-year-old girl was referred for swelling in the right parotid-masseteric region and severe trismus. Contrast-enhanced CT revealed that heterogenous enhancement of the right masseter muscle, and a reactive bone formation over the lateral cortex of the right mandibular ramus and osteolysis of the condyle were seen in plain CT. MRI showed that the mandibular ramus was a low-signal intensity and the reactive bone on the ramus was signal intensity similar to muscle on T1-weighted images. The lesion was clinically and radiologically diagnosed as chronic osteomyelitis of the mandibular ramus. However, a biopsy was performed intraorally under general anesthesia to rule out a malignant bone tumor, and pathological examination showed fibrous bone and Actinomyces druses. Finally, the lesion was diagnosed as actinomycotic osteomyelitis with proliferative periostitis. She underwent image-guided intraoral removal of impacted right third molar and reactive proliferative bone on the right mandibular ramus under general anesthesia. To improve trismus, coronoidectomy also was performed. After the discharge, AMPC was administrated intraorally for 7.5 months. Postoperative panoramic radiograph and CT showed the right mandibular angle resorption and coronoid process regeneration. There was no recurrence of mandibular osteomyelitis 7 years after surgery.

UV-Mediated Photofunctionalization of Dental Implant: A Seven-Year Results of a Prospective Study.

Our objective was to evaluate the seven-year results of photofunctionalized implants placed in regular, complex, and cancer-related cases. This study was a prospective, single-center study. Photofunctionalization was performed immediately prior to implantation with Ultraviolet (UV) light for 15 minutes. The success rate of each patient group and the influential factors on implant failure were analyzed. Seventy implants in 16 patients were included. Four implants were left submerged (sleep). The seven-year success rate of 30 implants in regular cases and 21 implants in complex cases was 100%. The success rate of 15 implants in cancer-related cases was 22.2%, in which implants were placed in resection or reconstructed sites with or without pre- or postoperative radiation history. Implant stability quotient (ISQ) values increased at second-stage surgery by 3.2 in regular cases and by 21.9 in complex cases, while it decreased by -3.5 in cancer cases. Multivariate analysis indicated that bone quality, location, and cancer resection significantly influenced implant failure. A very reliable seven-year success rate was obtained by UV-photofunctionalized implants in regular and complex cases, even with significant site-development procedures. However, the success rate in cancer cases was significantly and remarkably lower, suggesting remaining challenges of pathophysiologically compromised conditions, such as bone resection, segmental defect, and radiation.

UV-Pre-Treated and Protein-Adsorbed Titanium Implants Exhibit Enhanced Osteoconductivity.

Titanium materials are essential treatment modalities in the medical field and serve as a tissue engineering scaffold and coating material for medical devices. Thus, there is a significant demand to improve the bioactivity of titanium for therapeutic and experimental purposes. We showed that ultraviolet light (UV)-pre-treatment changed the protein-adsorption ability and subsequent osteoconductivity of titanium. Fibronectin (FN) adsorption on UV-treated titanium was 20% and 30% greater after 1-min and 1-h incubation, respectively, than that of control titanium. After 3-h incubation, FN adsorption on UV-treated titanium remained 30% higher than that on the control. Osteoblasts were cultured on titanium disks after 1-h FN adsorption with or without UV-pre-treatment and on titanium disks without FN adsorption. The number of attached osteoblasts during the early stage of culture was 80% greater on UV-treated and FN-adsorbed (UV/FN) titanium than on FN-adsorbed (FN) titanium; osteoblasts attachment on UV/FN titanium was 2.6- and 2.1-fold greater than that on control- and UV-treated titanium, respectively. The alkaline phosphatase activity of osteoblasts on UV/FN titanium was increased 1.8-, 1.8-, and 2.4-fold compared with that on FN-adsorbed, UV-treated, and control titanium, respectively. The UV/FN implants exhibited 25% and 150% greater in vivo biomechanical strength of bone integration than the FN- and control implants, respectively. Bone morphogenetic protein-2 (BMP-2) adsorption on UV-treated titanium was 4.5-fold greater than that on control titanium after 1-min incubation, resulting in a 4-fold increase in osteoblast attachment. Thus, UV-pre-treatment of titanium accelerated its protein adsorptivity and osteoconductivity, providing a novel strategy for enhancing its bioactivity.

Straight Locking Miniplate Technique Achieves Submillimeter Accuracy of Condylar Positional Change During Bimaxillary Orthognathic Surgery for Patients With Skeletal Class III Malocclusion.

PURPOSE: The straight locking miniplate (SLM) technique is a straightforward method to accurately reposition the maxilla during bimaxillary orthognathic surgery. The present study evaluated the accuracy of the SLM technique in maintaining the condylar position during surgery without the use of a cutting guide. PATIENTS AND METHODS: The present prospective, single-center study was conducted at Yokohama City University between 2016 and 2017 and included patients with skeletal Class III malocclusion. The patients were divided into 2 groups according to the fixation method used for the mandibular segments. The mandibular segments were fixed with miniplates either manually (manual group) or using the SLM technique (SLM group). Computed tomography was performed before and 3 days after surgery to compare the condylar position. The bodily and rotational movements of the condyle were analyzed. RESULTS: The subjects were 18 Japanese patients (36 condyles) who had undergone bilateral set back surgery with Le Fort I osteotomy. The amount of bodily movements in the manual and SLM groups were 1.44 and 0.62 mm, respectively. The degree of rotational movement in the sagittal plane in the manual and SLM groups was 3.33° and 0.23°, respectively. The bodily and rotational movements in the SLM group were significantly smaller than those in the manual group (P < .05 and P < .01, respectively). CONCLUSIONS: These results suggest that use of the SLM technique reduces the risk of condylar positional changes to less than 1 mm during orthognathic surgery without the use of any complex devices or a cutting guide.

Novel Osteogenic Behaviors around Hydrophilic and Radical-Free 4-META/MMA-TBB: Implications of an Osseointegrating Bone Cement.

Poly(methyl methacrylate) (PMMA)-based bone cement, which is widely used to affix orthopedic metallic implants, is considered bio-tolerant but lacks osteoconductivity and is cytotoxic. Implant loosening and toxic complications are significant and recognized problems. Here we devised two strategies to improve PMMA-based bone cement: (1) adding 4-methacryloyloxylethyl trimellitate anhydride (4-META) to MMA monomer to render it hydrophilic; and (2) using tri-n-butyl borane (TBB) as a polymerization initiator instead of benzoyl peroxide (BPO) to reduce free radical production. Rat bone marrow-derived osteoblasts were cultured on PMMA-BPO, common bone cement ingredients, and 4-META/MMA-TBB, newly formulated ingredients. After 24 h of incubation, more cells survived on 4-META/MMA-TBB than on PMMA-BPO. The mineralized area was 20-times greater on 4-META/MMA-TBB than PMMA-BPO at the later culture stage and was accompanied by upregulated osteogenic gene expression. The strength of bone-to-cement integration in rat femurs was 4- and 7-times greater for 4-META/MMA-TBB than PMMA-BPO during early- and late-stage healing, respectively. MicroCT and histomorphometric analyses revealed contact osteogenesis exclusively around 4-META/MMA-TBB, with minimal soft tissue interposition. Hydrophilicity of 4-META/MMA-TBB was sustained for 24 h, particularly under wet conditions, whereas PMMA-BPO was hydrophobic immediately after mixing and was unaffected by time or condition. Electron spin resonance (ESR) spectroscopy revealed that the free radical production for 4-META/MMA-TBB was 1/10 to 1/20 that of PMMA-BPO within 24 h, and the substantial difference persisted for at least 10 days. The compromised ability of PMMA-BPO in recruiting cells was substantially alleviated by adding free radical-scavenging amino-acid N-acetyl cysteine (NAC) into the material, whereas adding NAC did not affect the ability of 4-META/MMA-TBB. These results suggest that 4-META/MMA-TBB shows significantly reduced cytotoxicity compared to PMMA-BPO and induces osteoconductivity due to uniquely created hydrophilic and radical-free interface. Further pre-clinical and clinical validations are warranted.

Effectiveness of subspinal Le Fort I osteotomy in preventing postoperative nasal deformation.

PURPOSE: This study sought to determine the effectiveness of subspinal Le Fort I osteotomy (SLFIO) in preventing nasal deformation, by analyzing changes in the nasal profile on three-dimensional computed tomography (3D-CT) images. PATIENTS AND METHODS: The participants were 39 Japanese patients with mandibular prognathism (6 men and 33 women) who underwent bilateral sagittal split ramus osteotomy and Le Fort I osteotomy with maxillary advancement: SLFIO was performed in 20 patients and conventional Le Fort I osteotomy (CLFIO) in 19 patients. All patients underwent modified alar base cinch suture, V-Y closure, and reduction of the piriform aperture. CT data acquired before and 1 year after the surgery were evaluated three-dimensionally with software to determine changes in the nasal profile. RESULTS: Changes in alar width, alar base width, nasal length, and nasofrontal angle were significantly smaller following SLFIO than following CLFIO, although there were no significant differences in nasal projection, nasal tip angle, or nasolabial angle between two procedures. CONCLUSION: SLFIO for anterior repositioning of the maxilla can prevent undesirable transverse soft tissue changes of the nose.

Sentinel lymph node biopsy with preoperative CT lymphography and intraoperative indocyanine green fluorescence imaging for N0 early tongue cancer: A long-term follow-up study.

PURPOSE: This study evaluated the usefulness of sentinel lymph node (SLN) biopsy with preoperative computed tomographic lymphography (CTL) and intraoperative indocyanine green (ICG) fluorescence imaging for N0 early tongue cancer. METHODS: Twenty-seven patients with N0 early oral tongue cancer underwent CTL with a 128-slice multi-detector row CT scanner to detect SLN on the day before resection of primary tumor and SLN biopsy under ICG fluorescence guidance. We identified the location and number of SLNs mapped by CTL and evaluated whether CTL-enhanced SLNs could be identified intraoperatively as ICG fluorescent lymph nodes. Prognosis was also evaluated. RESULTS: SLNs were detected by CTL in 26 of 27 patients (96.3%). The total and mean numbers of SLNs were 41 and 1.5, respectively. All SLNs enhanced by CTL could be identified intraoperatively as ICG fluorescent lymph nodes. Two SLNs were found under ICG fluorescent guidance in only one patient without SLN enhanced by CTL. Among the 27 patients, five (18.5%) had SLN with metastasis. Median follow-up was 76 months (range 44-82 months). During follow-up, three of 22 patients without SLN metastasis had occult cervical lymph node metastasis. The 5-year overall survival rate was 100%. CONCLUSION: SLN biopsy with preoperative CTL and intraoperative ICG fluorescence imaging is a feasible and reliable procedure, without radioisotope tracers, for neck management in cases of early tongue cancer.