l-Cysteine-Modified Graphene Oxide-Based Membrane for Chiral Selective Separation.

A novel chiral separation membrane was fabricated by assembling l-cysteine (l-Cys)-modified graphene oxide sheets. l-Cys modification leads to an enantiomer separation membrane with an accessible interlayer spacing of 8 Å, which allows high solvent permeability. In the racemate separation experiments under isobaric conditions, the enantiomeric excess (ee) values of alanine (Ala), threonine (Thr), tyrosine (Tyr), and penicillamine (Pen) racemates in the permeation solution were 43.60, 44.11, 27.43, and 46.44%, respectively. In the racemate separation experiments under negative pressure, the separation performances of Ala, Thr, and Tyr were still maintained, and the enantiomeric excess (ee) values of the filtrate after separation were 56.80, 54.57, and 32.34%, respectively. These results indicate that the as-prepared GO-Cys membrane has a great practical value in the field of enantiomer separation.

Promising Anodic Electrochemiluminescence of Nontoxic Core/Shell CuInS2/ZnS Nanocrystals in Aqueous Medium and Its Biosensing Potential.

Copper indium sulfide (CuInS2, CIS) nanocrystals (NCs) are a promising solution to the toxic issue of Cd- and Pb-based NCs. Herein, electrochemiluminescence (ECL) of CIS NCs in aqueous medium is investigated for the first time with l-glutathione and sodium citrate-stabilized water-soluble CIS/ZnS NCs as model. The CIS/ZnS NCs can be oxidized to hole-injected states via electrochemically injecting holes into valence band at 0.55 and 0.94 V (vs Ag/AgCl), respectively. The hole-injected state around 0.94 V can bring out efficient oxidative-reduction ECL with a similar color to Ru(bpy)32+ in the presence of tri- n-propylamine (TPrA) and enable CIS/ZnS NCs promising ECL tags with l-glutathione as linker for labeling. The ECL of CIS/ZnS NCs/TPrA can be utilized to determine vascular endothelial growth factor (VEGF) from 0.10 to 1000 pM with the limit of detection at 0.050 pM (S/N = 3). Although the hole-injected state around 0.55 V is generated ahead of oxidation of TPrA and fails to bring out coreactant ECL, annihilation ECL proves that both hole-injected states generated, at 0.55 and 0.94 V, can be involved in electrochemical redox-induced radiative charge transfer by directly stepping CIS/ZnS NCs from electron-injecting potential to hole-injecting potential. CIS/ZnS NCs are promising nontoxic electrochemiluminophores with lowered ECL triggering potential around 0.55 V for less electrochemical interference upon the development of coreactant.

Excellent anti-corrosive pretreatment layer on iron substrate based on three-dimensional porous phytic acid/silane hybrid.

A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely NaBrO3-free and NaBrO3-doped PAS layers, were fabricated on iron substrates using the dip-coating method. SEM and AFM observations showed that the as-fabricated PAS-based layers possessed a 3D porous microstructure at the nanoscale and a rough surface morphology. X-ray photoelectron spectroscopic (XPS) and attenuated total reflection infrared (ATR-IR) spectroscopic characterization demonstrated that the above PAS layers bound to the iron surface via the -P-O- bond. Moreover, analyses of steady-state polarization curves and electrochemical impedance spectroscopic (EIS) data indicated that the corrosion rates of the iron substrates decreased considerably in the presence of the two PAS-based pretreatment layers. In particular, the NaBrO3-dosed PAS layer displayed the better corrosion resistance ability as well as maintaining the original microstructure and surface morphology. The PAS-based pretreatment layers are expected to act as substitutes for chromate and phosphate conversion layers and will find widespread application in the surface pretreatment of iron and steel materials due to the advantages of being environmentally friendly, the rapid film-forming process, and, especially, the nanoporous microstructure and rough surface morphology.