Detrimental Effects of Chlorhexidine on Articular Cartilage Viability, Matrix, and Mechanics.

BACKGROUND: Chlorhexidine gluconate (CHG) solution is commonly used as an antiseptic irrigation for bacterial decontamination during orthopaedic surgery. Although the chondrotoxicity of CHG on articular cartilage has been reported, the full extent of CHG-related chondrotoxicity and its effects on the extracellular matrix and mechanical properties are unknown. PURPOSE: To investigate the in vitro effects of a single 1-minute CHG exposure on the viability, biochemical content, and mechanics of native articular cartilage explants. STUDY DESIGN: Controlled laboratory study. METHODS: Articular cartilage explants (6 per group) were harvested from femoral condyles of the porcine stifle and sectioned at tidemark. Explants were bathed in CHG solution (0.05% CHG in sterile water) at varying concentrations (0% control, 0.01% CHG, and 0.05% CHG) for 1 minute, followed by complete phosphate-buffered saline wash and culture in chondrogenic medium. At 7 days after CHG exposure, cell viability, matrix content (collagen and glycosaminoglycan [GAG]), and compressive mechanical properties (creep indentation testing) were assessed. RESULTS: One-minute CHG exposure was chondrotoxic to explants, with both 0.05% CHG (2.6% ± 4.1%) and 0.01% CHG (76.3% ± 8.6%) causing a decrease in chondrocyte viability compared with controls (97.5% ± 0.6%; P < .001 for both). CHG exposure at either concentration had no significant effect on collagen content, while 0.05% CHG exposure led to a significant decrease in mean GAG per wet weight compared with the control group (2.6% ± 1.7% vs 5.2% ± 1.9%; P = .029). There was a corresponding weakening of mechanical properties in explants treated with 0.05% CHG compared with controls, with decreases in mean aggregate modulus (177.8 ± 90.1 kPa vs 280.8 ± 19.8 kPa; P < .029) and shear modulus (102.6 ± 56.5 kPa vs 167.9 ± 16.2 kPa; P < .020). CONCLUSION: One-minute exposure to CHG for articular cartilage explants led to dose-dependent decreases in chondrocyte viability, GAG content, and compressive mechanical properties. This raises concern for the risk of mechanical failure of the cartilage tissue after CHG exposure. CLINICAL RELEVANCE: Clinicians should be judicious regarding the use of CHG irrigation at these concentrations in the presence of native articular cartilage.

Tissue anisotropy and collagenomics in porcine penile tunica albuginea: Implications for penile structure-function relationships and tissue engineering.

The tunica albuginea (TA) of the penis is an elastic layer that serves a structural role in penile erection. Disorders affecting the TA cause pain, deformity, and erectile dysfunction. There is a substantial clinical need for engineered replacements of TA, but data are scarce on the material properties and biochemical composition of healthy TA. The objective of this study was to assess tissue organization, protein content, and mechanical properties of porcine TA to establish structure-function relationships and design criteria for tissue engineering efforts. TA was isolated from six pigs and subjected to histomorphometry, quantification of collagen content and pyridinoline crosslinks, bottom-up proteomics, and tensile mechanical testing. Collagen was 20 ± 2%/wet weight (WW) and 53 ± 4%/dry weight (DW). Pyridinoline content was 426 ±131 ng/mg WW, 1011 ± 190 ng/mg DW, and 45 ± 8 mmol/mol hydroxyproline. Bottom-up proteomics identified 14 proteins with an abundance of >0.1% of total protein. The most abundant collagen subtype was type I, representing 95.5 ± 1.5% of the total protein in the samples. Collagen types III, XII, and VI were quantified at 1.7 ± 1.0%, 0.8 ± 0.2%, and 0.4 ± 0.2%, respectively. Tensile testing revealed anisotropy: Young's modulus was significantly higher longitudinally than circumferentially (60 ± 18 MPa vs. 8 ± 5 MPa, p < 0.01), as was ultimate tensile strength (16 ± 4 MPa vs. 3 ± 3 MPa, p < 0.01). Taken together, the tissue mechanical and compositional data obtained in this study provide important benchmarks for the development of TA biomaterials. STATEMENT OF SIGNIFICANCE: The tunica albuginea of the penis serves an important structural role in physiologic penile erection. This tissue can become damaged by disease or trauma, leading to pain and deformity. Treatment options are limited. Little is known about the precise biochemical composition and biomechanical properties of healthy tunica albuginea. In this study, we characterize the tissue using proteomic analysis and tensile testing to establish design parameters for future tissue engineering efforts. To our knowledge, this is the first study to quantify tissue anisotropy and to use bottom-up proteomics to characterize the composition of penile tunica albuginea.

Characterization of the Temporomandibular Joint Disc Complex in the Yucatan Minipig.

The temporomandibular joint (TMJ) disc complex (i.e., the TMJ disc and its six attachments) is crucial to everyday functions such as mastication and speaking. The TMJ can be afflicted by many conditions, including disc displacement and defects. Pathologies of the TMJ disc complex most commonly present first as anterior disc displacement, which the field hypothesizes may implicate the two posterior attachments. As a result of anterior disc displacement, defects may develop in the lateral disc complex. Tissue engineering is poised to improve treatment paradigms for these indications of the TMJ disc complex by engineering biomimetic implants, but, first, gold-standard design criteria for such implants should be established through characterization studies. This study's objective was to characterize the structural, mechanical, biochemical, and crosslinking differences among the two posterior attachments and the lateral disc in the Yucatan minipig, a well-accepted TMJ animal model. In tension, it was found that the posterior inferior attachment (PIA) was significantly stiffer and stronger by 2.13 and 2.30 times, respectively, than the posterior superior attachment (PSA). It was found that collagen in both attachments was primarily aligned mediolaterally; however, the lateral disc was much more aligned and anisotropic than either attachment. Among the three locations, the PSA exhibited the greatest degree of heterogeneity and highest proportion of fat vacuoles. The PIA and lateral disc were 1.93 and 1.91 times more collagenous, respectively, by dry weight (DW) than the PSA. The PIA also exhibited 1.78 times higher crosslinking per DW than the PSA. Glycosaminoglycan per DW was significantly higher in the lateral disc by 1.48 and 5.39 times than the PIA and PSA, respectively. Together, these results establish design criteria for tissue-engineering of the TMJ disc complex and indicate that the attachments are less fibrocartilaginous than the disc, while still significantly contributing to the mechanical stability of the TMJ disc complex during articulation. These results also support the biomechanical function of the PIA and PSA, suggesting that the stiffer PIA anchors the disc to the mandibular condyle during articulation, while the softer PSA serves to allow translation over the articular eminence. Impact Statement Characterization of the temporomandibular joint (TMJ) disc complex (i.e., the disc and its attachments) has important implications for those aiming to tissue-engineer functional replacements and can help elucidate its biomechanical function. For example, the findings shown here suggest that the stiffer posterior inferior attachment anchors the disc during articulation, while the softer posterior superior attachment allows translation over the articular eminence.

Topographical Characterization of the Young, Healthy Human Femoral Medial Condyle.

OBJECTIVE: The medial femoral condyle of the knee exhibits some of the highest incidences of chondral degeneration. However, a dearth of healthy human tissues has rendered it difficult to ascertain whether cartilage in this compartment possesses properties that predispose it to injuries. Assessment of young, healthy tissue would be most representative of the tissue's intrinsic properties. DESIGN: This work examined the topographical differences in tribological, tensile, and compressive properties of young (n = 5, 26.2 ± 5.6 years old), healthy, human medial femoral condyles, obtained from viable allograft specimens. Corresponding to clinical incidences of pathology, it was hypothesized that the lowest mechanical properties would be found in the posterior region of the medial condyle, and that tissue composition would correspond to the established structure-function relationships of cartilage. RESULTS: Young's modulus, ultimate tensile strength, aggregate modulus, and shear modulus in the posterior region were 1.0-, 2.8-, 1.1-, and 1.0-fold less than the values in the anterior region, respectively. Surprisingly, although glycosaminoglycan content is thought to correlate with compressive properties, in this study, the aggregate and shear moduli correlated more robustly to the amount of pyridinoline crosslinks per collagen. Also, the coefficient of friction was anisotropic and ranged 0.22-0.26 throughout the condyle. CONCLUSION: This work showed that the posteromedial condyle displays lower tensile and compressive properties, which correlate to collagen crosslinks and may play a role in this region's predisposition to injuries. Furthermore, new structure-function relationships may need to be developed to account for the role of collagen crosslinks in compressive properties.

Stiffness- and Bioactive Factor-Mediated Protection of Self-Assembled Cartilage against Macrophage Challenge in a Novel Co-Culture System.

OBJECTIVE: Tissue-engineered cartilage implants must withstand the potential inflammatory and joint loading environment for successful long-term repair of defects. The work's objectives were to develop a novel, direct cartilage-macrophage co-culture system and to characterize interactions between self-assembled neocartilage and differentially stimulated macrophages. DESIGN: In study 1, it was hypothesized that the proinflammatory response of macrophages would intensify with increasing construct stiffness; it was expected that the neocartilage would display a decrease in mechanical properties after co-culture. In study 2, it was hypothesized that bioactive factors would protect neocartilage properties during macrophage co-culture. Also, it was hypothesized that interleukin 10 (IL-10)-stimulated macrophages would improve neocartilage mechanical properties compared to lipopolysaccharide (LPS)-stimulated macrophages. RESULTS: As hypothesized, stiffer neocartilage elicited a heightened proinflammatory macrophage response, increasing tumor necrosis factor alpha (TNF-α) secretion by 5.47 times when LPS-stimulated compared to construct-only controls. Interestingly, this response did not adversely affect construct properties for the stiffest neocartilage but did correspond to a significant decrease in aggregate modulus for soft and medium stiffness constructs. In addition, bioactive factor-treated constructs were protected from macrophage challenge compared to chondrogenic medium-treated constructs, but IL-10 did not improve neocartilage properties, although stiff constructs appeared to bolster the anti-inflammatory nature of IL-10-stimulated macrophages. However, co-culture of bioactive factor-treated constructs with LPS-treated macrophages reduced TNF-α secretion by over 4 times compared to macrophage-only controls. CONCLUSIONS: In conclusion, neocartilage stiffness can mediate macrophage behavior, but stiffness and bioactive factors prevent macrophage-induced degradation. Ultimately, this co-culture system could be utilized for additional studies to develop the burgeoning field of cartilage mechano-immunology.

Isolation and characterization of porcine macrophages and their inflammatory and fusion responses in different stiffness environments.

Evaluating the host immune response to biomaterials is an essential step in the development of medical devices and tissue engineering strategies. To aid in this process, in vitro studies, whereby immune cells such as macrophages are cultured on biomaterials, can often expedite high throughput testing of many materials prior to implantation. While most studies to date utilize murine or human cells, the use of porcine macrophages has been less well described, despite the prevalent use of porcine models in medical device and tissue engineering development. In this study, we describe the isolation and characterization of porcine bone marrow- and peripheral blood-derived macrophages, and their interactions with biomaterials. We confirmed the expression of the macrophage surface markers CD68 and F4/80 and characterized the porcine macrophage response to the inflammatory stimulus, bacterial lipopolysaccharide. Finally, we investigated the inflammatory and fusion response of porcine macrophages cultured on different stiffness hydrogels, and we found that stiffer hydrogels enhanced inflammatory activation by more than two-fold and promoted fusion to form foreign body giant cells. Together, this study establishes the use of porcine macrophages in biomaterial testing and reveals a stiffness-dependent effect on biomaterial-induced giant cell formation.

Knee orthopedics as a template for the temporomandibular joint.

Although the knee joint and temporomandibular joint (TMJ) experience similar incidence of cartilage ailments, the knee orthopedics field has greater funding and more effective end-stage treatment options. Translational research has resulted in the development of tissue-engineered products for knee cartilage repair, but the same is not true for TMJ cartilages. Here, we examine the anatomy and pathology of the joints, compare current treatments and products for cartilage afflictions, and explore ways to accelerate the TMJ field. We examine disparities, such as a 6-fold higher article count and 2,000-fold higher total joint replacement frequency in the knee compared to the TMJ, despite similarities in osteoarthritis incidence. Using knee orthopedics as a template, basic and translational research will drive the development and implementation of clinical products for the TMJ. With more funding opportunities, training programs, and federal guidance, millions of people afflicted with TMJ disorders could benefit from novel, life-changing therapeutics.

Diagnostic Arthroscopy of the Minipig Stifle (Knee) for Translational Large Animal Research.

To gain regulatory approval for the clinical use of knee biologics and devices in humans, translational large-animal studies are typically required. Animal models that permit second-look arthroscopy are valuable because they allow for longitudinal assessment of the treated tissue without needing to sacrifice the animal. The minipig is an ideal preclinical animal model for the investigation of therapies for the knee, in part because arthroscopy can be performed in its stifle (knee) joint with the use of standard surgical equipment used in humans. The purpose of this Technical Note is to describe a reproducible technique for diagnostic arthroscopy of the minipig stifle (knee) joint.

Adult Dermal Stem Cells for Scaffold-Free Cartilage Tissue Engineering: Exploration of Strategies.

Dermis-isolated adult stem (DIAS) cells, abundantly available, are attractive for regenerative medicine. Strategies have been devised to isolate and to chondroinduce DIAS cells from various animals. This study aimed to characterize DIAS cells from human abdominal skin (human dermis-isolated adult stem [hDIAS] cells) and to compare and to refine various chondroinduction regimens to form functional neocartilage constructs. The stemness of hDIAS cells was verified (Phase I), three chondroinduction pretreatments were compared (Phase II), and, from these, one regimen was carried forward for refinement in Phase III for improving the mechanical properties of hDIAS cell-derived constructs. Multilineage differentiation and mesenchymal stem cell markers were observed. Among various chondroinduction pretreatments, the nodule formation pretreatment yielded constructs at least 72% larger in diameter, with higher glycosaminoglycan (GAG) content by 44%, compared with other pretreatments. Furthermore, it was found that culturing cells on nontissue culture-treated surfaces yielded constructs (1) on par with constructs derived from aggrecan-coated surfaces and (2) with superior mechanical properties than constructs derived from cells cultured on tissue culture-treated surfaces. After the nodule formation pretreatment, combined supplementation of TGF-ß1, IGF-I, and fetal bovine serum significantly enhanced aggregate modulus and shear modulus by 75% and 69%, respectively, over the supplementation by TGF-ß1 alone. In summary, human skin-derived DIAS cells are responsive to chondroinduction for forming neocartilage. Furthermore, the mechanical properties of the resultant human constructs can be improved by treatments shown to be efficacious in animal models. Advances made toward tissue-engineering cartilage using animal cells were shown to be applicable to hDIAS cells for cartilage repair and regeneration.

Exogenous Lysyl Oxidase-Like 2 and Perfusion Culture Induce Collagen Crosslink Formation in Osteogenic Grafts.

Lysyl oxidase (LOX)-mediated collagen crosslinking can regulate osteoblastic phenotype and enhance mechanical properties of tissues, both areas of interest in bone tissue engineering. The objective of this study is to investigate the effect of lysyl oxidase-like 2 (LOXL2) on osteogenic differentiation of mesenchymal stem cells (MSCs) cultured in perfusion bioreactors, enzymatic collagen crosslink formation in the extracellular matrix (ECM), and mechanical properties of engineered bone grafts. Exogenous LOXL2 to MSCs seeded in composite scaffolds under perfusion culture for up to 28 days is administered. Constructs treated with LOXL2 appear brown in color and possess greater DNA content and osteogenic potential measured by a twofold increase in bone sialoprotein gene expression. Collagen expression of LOXL2-treated scaffolds is lower than untreated controls. Functional outputs such as calcium deposition, osteocalcin expression, and compressive modulus are unaffected by LOXL2 supplementation. Excitingly, LOXL2-treated constructs contain 1.8- and 1.4-times more pyridinoline (PYD) crosslinks per mole of collagen and per wet weight, respectively, than untreated constructs. Despite these increases, compressive moduli of LOXL2-treated constructs are similar to untreated constructs over the 28-day culture duration. This is the first report of LOXL2 application to engineered, three-dimensional bony constructs. The results suggest a potentially new strategy for engineering osteogenic grafts with a mature ECM by modulating crosslink formation.

Facet Joints of the Spine: Structure-Function Relationships, Problems and Treatments, and the Potential for Regeneration.

The zygapophysial joint, a diarthrodial joint commonly referred to as the facet joint, plays a pivotal role in back pain, a condition that has been a leading cause of global disability since 1990. Along with the intervertebral disc, the facet joint supports spinal motion and aids in spinal stability. Highly susceptible to early development of osteoarthritis, the facet is responsible for a significant amount of pain in the low-back, mid-back, and neck regions. Current noninvasive treatments cannot offer long-term pain relief, while invasive treatments can relieve pain but fail to preserve joint functionality. This review presents an overview of the facet in terms of its anatomy, functional properties, problems, and current management strategies. Furthermore, this review introduces the potential for regeneration of the facet and particular engineering strategies that could be employed as a long-term treatment.

A Comparison of Bone Marrow and Cord Blood Mesenchymal Stem Cells for Cartilage Self-Assembly.

Joint injury is a common cause of premature retirement for the human and equine athlete alike. Implantation of engineered cartilage offers the potential to increase the success rate of surgical intervention and hasten recovery times. Mesenchymal stem cells (MSCs) are a particularly attractive cell source for cartilage engineering. While bone marrow-derived MSCs (BM-MSCs) have been most extensively characterized for musculoskeletal tissue engineering, studies suggest that cord blood MSCs (CB-MSCs) may elicit a more robust chondrogenic phenotype. The objective of this study was to determine a superior equine MSC source for cartilage engineering. MSCs derived from bone marrow or cord blood were stimulated to undergo chondrogenesis through aggregate redifferentiation and used to generate cartilage through the self-assembling process. The resulting neocartilage produced from either BM-MSCs or CB-MSCs was compared by measuring mechanical, biochemical, and histological properties. We found that while BM constructs possessed higher tensile properties and collagen content, CB constructs had superior compressive properties comparable to that of native tissue and higher GAG content. Moreover, CB constructs had alkaline phosphatase activity, collagen type X, and collagen type II on par with native tissue suggesting a more hyaline cartilage-like phenotype. In conclusion, while both BM-MSCs and CB-MSCs were able to form neocartilage, CB-MSCs resulted in tissue more closely resembling native equine articular cartilage as determined by a quantitative functionality index. Therefore, CB-MSCs are deemed a superior source for the purpose of articular cartilage self-assembly.

Functional properties of native and tissue-engineered cartilage toward understanding the pathogenesis of chondral lesions at the knee: A bovine cadaveric study.

Chondral lesions frequently occur in different topographic locations of the knee. This study evaluated the functional properties among the articulating surfaces of the tibiofemoral and patellofemoral joints, and whether neo-cartilage engineered using chondrocytes from different knee locations would reflect these differences. The biomechanical properties of bovine cartilage isolated from eight locations within the tibiofemoral (medial and lateral condyle, medial and lateral tibial plateau) and patellofemoral joints (medial and lateral trochlea, medial and lateral patella) were examined. Tensile Young's moduli (tensile moduli) and aggregate moduli of the medial condyle were lower than those of the medial tibial plateau (6.11 ± 0.89 MPa vs. 7.19 ± 1.05 MPa, p = 0.04 and 354.4 ± 38.3 kPa vs. 419.4 ± 31.3 kPa, p = 0.002, respectively). Patella tensile and compressive moduli were lower than the trochlea (4.79 ± 2.01 MPa vs. 6.91 ± 2.46 MPa, p = 0.01 and 337.4 ± 37.2 kPa vs. 389.1 ± 38.3 kPa, p = 0.0005, respectively). Furthermore, chondrocytes from the above locations were used to engineer neo-cartilage, and its respective properties were evaluated. In neo-cartilage, medial condyle tensile and aggregate moduli were lower than in the medial tibial plateau (0.96 ± 0.23 MPa vs. 1.31 ± 0.31 MPa, p = 0.02, and 115.8 ± 26.0 kPa vs. 160.8 ± 18.8 kPa, p = 0.001, respectively). Compared to trochlear chondrocytes, neo-cartilage formed from patellar chondrocytes exhibited lower tensile and compressive moduli (1.16 ± 0.27 MPa vs. 0.74 ± 0.25 MPa, p < 0.001, and 109.1 ± 24.0 kPa vs. 82.5 ± 18.1 kPa, p < 0.001). A significant degree of disparity in biomechanical properties of the opposing articular surfaces was detected; the medial condyle and patella exhibited inferior properties compared to the opposing medial tibial plateau and trochlea, respectively. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2452-2464, 2017.

Concise Review: Human Dermis as an Autologous Source of Stem Cells for Tissue Engineering and Regenerative Medicine.

UNLABELLED: The exciting potential for regenerating organs from autologous stem cells is on the near horizon, and adult dermis stem cells (DSCs) are particularly appealing because of the ease and relative minimal invasiveness of skin collection. A substantial number of reports have described DSCs and their potential for regenerating tissues from mesenchymal, ectodermal, and endodermal lineages; however, the exact niches of these stem cells in various skin types and their antigenic surface makeup are not yet clearly defined. The multilineage potential of DSCs appears to be similar, despite great variability in isolation and in vitro propagation methods. Despite this great potential, only limited amounts of tissues and clinical applications for organ regeneration have been developed from DSCs. This review summarizes the literature on DSCs regarding their niches and the specific markers they express. The concept of the niches and the differentiation capacity of cells residing in them along particular lineages is discussed. Furthermore, the advantages and disadvantages of widely used methods to demonstrate lineage differentiation are considered. In addition, safety considerations and the most recent advancements in the field of tissue engineering and regeneration using DSCs are discussed. This review concludes with thoughts on how to prospectively approach engineering of tissues and organ regeneration using DSCs. Our expectation is that implementation of the major points highlighted in this review will lead to major advancements in the fields of regenerative medicine and tissue engineering. SIGNIFICANCE: Autologous dermis-derived stem cells are generating great excitement and efforts in the field of regenerative medicine and tissue engineering. The substantial impact of this review lies in its critical coverage of the available literature and in providing insight regarding niches, characteristics, and isolation methods of stem cells derived from the human dermis. Furthermore, it provides analysis of the current state-of-the-art regenerative approaches using human-derived dermal stem cells, with consideration of current guidelines, to assist translation toward therapeutic use.

Digoxin and adenosine triphosphate enhance the functional properties of tissue-engineered cartilage.

Toward developing engineered cartilage for the treatment of cartilage defects, achieving relevant functional properties before implantation remains a significant challenge. Various chemical and mechanical stimuli have been used to enhance the functional properties of engineered musculoskeletal tissues. Recently, Ca(2+)-modulating agents have been used to enhance matrix synthesis and biomechanical properties of engineered cartilage. The objective of this study was to determine whether other known Ca(2+) modulators, digoxin and adenosine triphosphate (ATP), can be employed as novel stimuli to increase collagen synthesis and functional properties of engineered cartilage. Neocartilage constructs were formed by scaffold-free self-assembling of primary bovine articular chondrocytes. Digoxin, ATP, or both agents were added to the culture medium for 1 h/day on days 10-14. After 4 weeks of culture, neocartilage properties were assessed for gross morphology, biochemical composition, and biomechanical properties. Digoxin and ATP were found to increase neocartilage collagen content by 52-110% over untreated controls, while maintaining proteoglycan content near native tissue values. Furthermore, digoxin and ATP increased the tensile modulus by 280% and 180%, respectively, while the application of both agents increased the modulus by 380%. The trends in tensile properties were found to correlate with the amount of collagen cross-linking. Live Ca(2+) imaging experiments revealed that both digoxin and ATP were able to increase Ca(2+) oscillations in monolayer-cultured chondrocytes. This study provides a novel approach toward directing neocartilage maturation and enhancing its functional properties using novel Ca(2+) modulators.

Repair and tissue engineering techniques for articular cartilage.

Chondral and osteochondral lesions due to injury or other pathology commonly result in the development of osteoarthritis, eventually leading to progressive total joint destruction. Although current progress suggests that biologic agents can delay the advancement of deterioration, such drugs are incapable of promoting tissue restoration. The limited ability of articular cartilage to regenerate renders joint arthroplasty an unavoidable surgical intervention. This Review describes current, widely used clinical repair techniques for resurfacing articular cartilage defects; short-term and long-term clinical outcomes of these techniques are discussed. Also reviewed is a developmental pipeline of acellular and cellular regenerative products and techniques that could revolutionize joint care over the next decade by promoting the development of functional articular cartilage. Acellular products typically consist of collagen or hyaluronic-acid-based materials, whereas cellular techniques use either primary cells or stem cells, with or without scaffolds. Central to these efforts is the prominent role that tissue engineering has in translating biological technology into clinical products; therefore, concomitant regulatory processes are also discussed.

TGF-ß1, GDF-5, and BMP-2 stimulation induces chondrogenesis in expanded human articular chondrocytes and marrow-derived stromal cells.

Replacement of degenerated cartilage with cell-based cartilage products may offer a long-term solution to halt arthritis' degenerative progression. Chondrocytes are frequently used in cell-based FDA-approved cartilage products; yet human marrow-derived stromal cells (hMSCs) show significant translational potential, reducing donor site morbidity and maintaining their undifferentiated phenotype with expansion. This study sought to investigate the effects of transforming growth factor ß1 (TGF-ß1), growth/differentiation factor 5 (GDF-5), and bone morphogenetic protein 2 (BMP-2) during postexpansion chondrogenesis in human articular chondrocytes (hACs) and to compare chondrogenesis in passaged hACs with that of passaged hMSCs. Through serial expansion, chondrocytes dedifferentiated, decreasing expression of chondrogenic genes while increasing expression of fibroblastic genes. However, following expansion, 10 ng/mL TGF-ß1, 100 ng/mL GDF-5, or 100 ng/mL BMP-2 supplementation during three-dimensional aggregate culture each upregulated one or more markers of chondrogenic gene expression in both hACs and hMSCs. Additionally, in both cell types, the combination of TGF-ß1, GDF-5, and BMP-2 induced the greatest upregulation of chondrogenic genes, that is, Col2A1, Col2A1/Col1A1 ratio, SOX9, and ACAN, and synthesis of cartilage-specific matrix, that is, glycosaminoglycans (GAGs) and ratio of collagen II/I. Finally, TGF-ß1, GDF-5, and BMP-2 stimulation yielded mechanically robust cartilage rich in collagen II and GAGs in both cell types, following 4 weeks maturation. This study illustrates notable success in using the self-assembling method to generate robust, scaffold-free neocartilage constructs using expanded hACs and hMSCs.

Topographic variations in biomechanical and biochemical properties in the ankle joint: an in vitro bovine study evaluating native and engineered cartilage.

PURPOSE: The purposes of this study were to identify differences in the biomechanical and biochemical properties among the articulating surfaces of the ankle joint and to evaluate the functional and biological properties of engineered neocartilage generated using chondrocytes from different locations in the ankle joint. METHODS: The properties of the different topographies within the ankle joint (tibial plafond, talar dome, and distal fibula) were evaluated in 28 specimens using 7 bovine ankles; the femoral condyle was used as a control. Chondrocytes from the same locations were used to form 28 neocartilage constructs by tissue engineering using an additional 7 bovine ankles. The functional properties of neocartilage were compared with native tissue values. RESULTS: Articular cartilage from the tibial plafond, distal fibula, talar dome, and femoral condyle exhibited Young modulus values of 4.8 ± 0.5 MPa, 3.9 ± 0.1 MPa, 1.7 ± 0.2 MPa, and 4.0 ± 0.5 MPa, respectively. The compressive properties of the corresponding tissues were 370 ± 22 kPa, 242 ± 18 kPa, 255 ± 26 kPa, and 274 ± 18 kPa, respectively. The tibial plafond exhibited 3-fold higher tensile properties and 2-fold higher compressive and shear moduli compared with its articulating talar dome; the same disparity was observed in neocartilage. Similar trends were detected in biochemical data for both native and engineered tissues. CONCLUSIONS: The cartilage properties of the various topographic locations within the ankle are significantly different. In particular, the opposing articulating surfaces of the ankle have significantly different biomechanical and biochemical properties. The disparity between tibial plafond and talar dome cartilage and chondrocytes warrants further evaluation in clinical studies to evaluate their exact role in the pathogenesis of ankle lesions. CLINICAL RELEVANCE: Therapeutic modalities for cartilage lesions need to consider the exact topographic source of the cells or cartilage grafts used. Furthermore, the capacity of generating neocartilage implants from location-specific chondrocytes of the ankle joint may be used in the future as a tool for the treatment of chondral lesions.

Unlike bone, cartilage regeneration remains elusive.

Articular cartilage was predicted to be one of the first tissues to successfully be regenerated, but this proved incorrect. In contrast, bone (but also vasculature and cardiac tissues) has seen numerous successful reparative approaches, despite consisting of multiple cell and tissue types and, thus, possessing more complex design requirements. Here, we use bone-regeneration successes to highlight cartilage-regeneration challenges: such as selecting appropriate cell sources and scaffolds, creating biomechanically suitable tissues, and integrating to native tissue. We also discuss technologies that can address the hurdles of engineering a tissue possessing mechanical properties that are unmatched in human-made materials and functioning in environments unfavorable to neotissue growth.

Mechanical characterization of differentiated human embryonic stem cells.

Human embryonic stem cells (hESCs) possess an immense potential in a variety of regenerative applications. A firm understanding of hESC mechanics, on the single cell level, may provide great insight into the role of biophysical forces in the maintenance of cellular phenotype and elucidate mechanical cues promoting differentiation along various mesenchymal lineages. Moreover, cellular biomechanics can provide an additional tool for characterizing stem cells as they follow certain differentiation lineages, and thus may aid in identifying differentiated hESCs, which are most suitable for tissue engineering. This study examined the viscoelastic properties of single undifferentiated hESCs, chondrogenically differentiated hESC subpopulations, mesenchymal stem cells (MSCs), and articular chondrocytes (ACs). hESC chondrogenesis was induced using either transforming growth factor-beta1 (TGF-beta1) or knock out serum replacer as differentiation agents, and the resulting cell populations were separated based on density. All cell groups were mechanically tested using unconfined creep cytocompression. Analyses of subpopulations from all differentiation regimens resulted in a spectrum of mechanical and morphological properties spanning the range of hESCs to MSCs to ACs. Density separation was further successful in isolating cellular subpopulations with distinct mechanical properties. The instantaneous and relaxed moduli of subpopulations from TGF-beta1 differentiation regimen were statistically greater than those of undifferentiated hESCs. In addition, two subpopulations from the TGF-beta1 group were identified, which were not statistically different from native articular chondrocytes in their instantaneous and relaxed moduli, as well as their apparent viscosity. Identification of a differentiated hESC subpopulation with similar mechanical properties as native chondrocytes may provide an excellent cell source for tissue engineering applications. These cells will need to withstand any mechanical stimulation regimen employed to augment the mechanical and biochemical characteristics of the neotissue. Density separation was effective at purifying distinct populations of cells. A differentiated hESC subpopulation was identified with both similar mechanical and morphological characteristics as ACs. Future research may utilize this cell source in cartilage regeneration efforts.