In situ fast self-assembled preparation of dandelion-like Cu(OH)2@Cu3(HHTP)2 with core-shell heterostructure arrays for electrochemical sensing of formaldehyde in food samples.

Formaldehyde is known to harm the respiratory, nervous, and digestive systems of people. In this paper, a novel dandelion-like electrocatalyst with core-shell heterostructure arrays were fast self-assembled prepared in situ using copper foam (CF) as support substrate and 2,3,6,7,10,11 hexahydroxy-triphenyl (HHTP) as ligand (Cu(OH)2@Cu3(HHTP)2/CF) by a simple two-step hydrothermal reaction. The 1D Cu(OH)2 nanorods "core" and the 2D π-conjugated conducting metal-organic frameworks (Cu3(HHTP)2cMOF) "shell" with remote delocalized electrons give the dandelion-like heterogeneous catalysts excellent electrochemical activity such as a large specific surface area, high conductivity and a fast electron transfer rate. The Cu(OH)2@Cu3(HHTP)2/CF exhibited excellent electrocatalytic performance for formaldehyde under alkaline conditions with a linear range of 0.2 µmol/L - 125 µmol/L and 125 µmol/L - 8 mmol/L, a detection limit as low as 15.9 nmol/L (S/N = 3), as well as good accuracy, consistency, and durability, and it effectively identified FA in food.

Polypyrrole pre-intercalation engineering-induced NH4+ removal in tunnel ammonium vanadate toward high-performance zinc ion batteries.

Ammonium vanadate with stable bi-layered structure and superior mass-specific capacity have emerged as competitive cathode materials for aqueous rechargeable zinc-ion batteries (AZIBs). Nevertheless, fragile NH…O bonds and too strong electrostatic interaction by virtue of excessive NH4+ will lead to sluggish Zn2+ ion mobility, further largely affects the electro-chemical performance of ammonium vanadate in AZIBs. The present work incorporates polypyrrole (PPy) to partially replace NH4+ in NH4V4O10 (NVO), resulting in the significantly enlarged interlayers (from 10.1 to 11.9 Å), remarkable electronic conductivity, increased oxygen vacancies and reinforced layered structure. The partial removal of NH4+ will alleviate the irreversible deammoniation to protect the laminate structures from collapse during ion insertion/extraction. The expanded interlayer spacing and the increased oxygen vacancies by the virtue of the introduction of polypyrrole improve the ionic diffusion, enabling exceptional rate performance of NH4V4O10. As expected, the resulting polypyrrole intercalated ammonium vanadate (NVOY) presents a superior discharge capacity of 431.9 mAh g-1 at 0.5 A g-1 and remarkable cycling stability of 219.1 mAh g-1 at 20 A g-1 with 78 % capacity retention after 1500 cycles. The in-situ electrochemical impedance spectroscopy (EIS), in-situ X-ray diffraction (XRD), ex-situ X-ray photoelectron spectroscopy (XPS) and ex-situ high resolution transmission electron microscopy (HR-TEM) analysis investigate a highly reversible intercalation Zn-storage mechanism, and the enhanced the redox kinetics are related to the combined effect of interlayer regulation, high electronic conductivity and oxygen defect engineering by partial substitution NH4+ of PPy incorporation.

Highly efficient catalytic Fenton-Like reactions of bimetallic Fe/Cu chelated on radiation functionalized nonwoven fabric for pollutant control.

A remarkably efficient and affordable Fe/Cu bimetallic catalyst featuring a substantial light energy utilization and compatibility with a sizable substrate was developed for Fenton-like reactions aimed at pollutant control. Specifically, a novel strategy was employed to synthesize high-density metal sites (Fe:Cu ≈ 3:1) robustly embedded on polyethylene/polyethylene terephthalate nonwoven fabric (PE/PET NWF) via radiation-induced graft polymerization (RIGP) and subsequent chemical modification, labeled as Fe/Cu-PPAO. Its high effectiveness was demonstrated by degrading 50 mg/L of tetracycline hydrochloride within 30 min in the presence of H2O2 under simulate sunlight irradiation. It was investigated that amidoxime groups regulated the optical gaps and HOMO-LUMO gaps of metal ions to enable the absorption of a broader spectrum light while the Cu2+ facilitated the transfer of electrons between the bimetal ions to achieve an improved reaction path. Furthermore, X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations further revealed its special complex state and delicate electronic structure between bimetal ions and amidoxime groups. Our study offers a new strategy to synthesize high-density bimetallic sites catalyst for environmental remediation and pushes forward insight into understanding the catalytic mechanism of bimetallic Fenton-like catalysts.

Facile Dual-Protection Layer and Advanced Electrolyte Enhancing Performances of Cobalt-free/Nickel-rich Cathodes in Lithium-Ion Batteries.

Despite cobalt (Co)-free/nickel (Ni)-rich layered oxides being considered as one of the promising cathode materials due to their high specific capacity, their highly reactive surface still hinders practical application. Herein, a polyimide/polyvinylpyrrolidone (PI/PVP, denoted as PP) coating layer is demonstrated as dual protection for the LiNi0.96Mg0.02Ti0.02O2 (NMT) cathode material to suppress surface contamination against moist air and to prevent unwanted interfacial side reactions during cycling. The PP-coated NMT (PP@NMT) preserves a relatively clean surface with the bare generation of lithium residues, structural degradation, and gas evolution even after exposure to air with ∼30% humidity for 2 weeks compared to the bare NMT. In addition, the exposed PP@NMT significantly enhances the electrochemical performance of graphite||NMT cells by preventing byproducts and structural distortion. Moreover, the exposed PP@NMT achieves a high capacity retention of 86.7% after 500 cycles using an advanced localized high-concentration electrolyte. This work demonstrates promising protection of Co-free/Ni-rich layered cathodes for their practical usage even after exposure to moist air.

Toward the Practical Use of Cobalt-Free Lithium-Ion Batteries by an Advanced Ether-Based Electrolyte.

The criticality of cobalt (Co) has been motivating the quest for Co-free positive electrode materials for building lithium (Li)-ion batteries (LIBs). However, the LIBs based on Co-free positive electrode materials usually suffer from relatively fast capacity decay when coupled with conventional LiPF6-organocarbonate electrolytes. To address this issue, a 1,2-dimethoxyethane-based localized high-concentration electrolyte (LHCE) was developed and evaluated in a Co-free Li-ion cell chemistry (graphite||LiNi0.96Mg0.02Ti0.02O2). Extraordinary capacity retentions were achieved with the LHCE in coin cells (95.3%), single-layer pouch cells (79.4%), and high-capacity loading double-layer pouch cells (70.9%) after being operated within the voltage range of 2.5-4.4 V for 500 charge/discharge cycles. The capacity retentions of counterpart cells using the LiPF6-based conventional electrolyte only reached 61.1, 57.2, and 59.8%, respectively. Mechanistic studies reveal that the superior electrode/electrolyte interphases formed by the LHCE and the intrinsic chemical stability of the LHCE account for the excellent electrochemical performance in the Co-free Li-ion cells.

Rosmarinic Acid Induces Proliferation Suppression of Hepatoma Cells Associated with NF-κB Signaling Pathway.

BACKGROUND: Rosmarinic acid (RA) is a natural phenolic compound that acts as a Fyn inhibitor by 53 homology modeling of the human Fyn structure. Therefore, the apoptosis mechanism related to  NF-κB signaling pathway induced by RA in HepG2 was investigated. METHODS: The cell growth, apoptosis, and proliferation of HepG2 regulated by various concentrations of RA were studied. The proteins expression of MMP-2, MMP-9, PI3K, AKT, NF-κB, and apoptosis-related proteins Bax, Bcl-2, cleaved caspase-3 were detected. RESULTS: RA significantly reduced proliferation rates, inhibited migration and invasion, and decreased the expressions of invasion-related factors, such as matrix metalloproteinase (MMP)-2 and MMP-9. TUNEL staining revealed that RA resulted in a dose-dependent increase of HepG2 cell apoptosis. In line with this finding, the expression of apoptosis suppressor protein Bcl-2 was downregulated and that of the pro-apoptotic proteins Bax and cleaved caspase-3 was increased. In addition, we found that the phosphatidylinositol 3-kinase (PI3K)/Akt/nuclear factor kappa B (NF-κB) signaling pathway was involved in RA-mediated inhibition of HepG2 cell metastasis. CONCLUSION: Our study identified that  RA as a drug candidate for the treatment of HCC.

Pyrene-Based Nonwoven Fabric with Tunable Fluorescence Properties by Employing the Aggregation-Caused Quenching Effect.

Conventional aromatic compounds tend to exhibit the formation of sandwich-shaped excimers and exciplexes between their excited and ground states at high concentrations or in their aggregated states, causing their fluorescence to weaken or disappear due to the aggregation-caused quenching (ACQ) effect. This limits their applications in concentrated solutions or solid materials. Herein, for the first time, ACQ-based pyrene (Py) units are covalently connected to the surface of polyethylene/polypropylene nonwoven fabric (PE/PP NWF) via electron beam preradiation-induced graft polymerization followed by chemical modification. The matrix can be considered a solid solvent and Py units as a solid solute, such that the amount of Py units can be controlled by varying the reaction time. The obtained fluorescent fabric not only exhibits remarkable fluorescence properties with high fluorescence intensity, high quantum yield (>90%), and excellent fluorescence stability after laundering or in harsh chemical environments, but the fluorescence color and intensity, quantum yield, and lifetime can also be regulated by employing the ACQ effect. Additionally, the as-prepared fluorescent fabric can effectively distinguish common monocyclic aromatic hydrocarbons via a simple fluorescence response test.

Radiation-Induced In Situ-Printed Nonconjugated Fluorescent Nonwoven Fabric with Superior Fluorescent Properties.

A new technique is proposed for the in situ printing of fluorescent fabrics with superior fluorescent properties that have the potential for continuous roll-to-roll production in the industry. Nonconjugated chemical moieties were covalently connected to polyethylene/polypropylene nonwoven fabric (PE/PP NWF) to successfully prepare fluorescent PE/PP NWF, which emits a bright blue light and has a high quantum yield (∼83.35%) that can be attributed to a unique aggregation-induced emission effect. The fluorescent PE/PP NWF exhibits excellent fluorescent stability under high shear forces during accelerated laundering and in harsh chemical environments. The fluorescent PE/PP NWF can also be tailored into diverse shapes and printed in situ with high resolution. The versatility of the method was also demonstrated by fabricating fluorescent materials with different polymer matrices such as Nylon 66 fiber and PE terephthalate membrane.

In-situ formation of durable akaganeite (ß-FeOOH) nanorods on sulfonate-modified poly(ethylene terephthalate) fabric for dual-functional wastewater treatment.

Industrial oily wastewater with dye-pollution is a critical environmental issue for water purification. However, the fabrication of effective and stable materials for oil-water separation and simultaneous degradation of organic contaminants remains a critical challenge. Herein, we report a new process for in-situ formation of akaganeite (ß-FeOOH) nanorods layer on the surface of poly(ethylene terephthalate) (PET) fabric via radiation-induced graft polymerization of glycidyl methacrylate, which is then sulfonated and mineralized. The resultant product is labeled as ß-FeOOH@PET, which exhibits dual purification by demonstrating an effective oil-water separation and organic dyes photodegradation under the illumination of visible light. It provides stable performance even after 1000 wash cycles. The sulfonated layer acts as not only an electronic transport layer to prevent electron-hole recombination, but also as an anchored interface for immobilizing ß-FeOOH nanorods on the sulfonated layer via strong covalent bonds. Overall, the superhydrophilicity and underwater superoleophobicity of ß-FeOOH@PET fabric, along with its robustness with a flexible organic substrate and its dual purification function, provide a new insight toward oily wastewater remediation and water purification in large-scale applications.

Flexible and Thermally Induced Switchable Fire Alarm Fabric Based On Layer-by-Layer Self-Assembled Silver Sheet/Fe3O4 Nanowire Composite.

Textiles with fire detection will appeal for the interior decoration of houses and play a critical role in public security. Herein, we fabricated a sandwichlike fire alarm fabric (Ag@Fe3O4-MS) based on Fe3O4 nanowire (NW) arrays and fish-scale-like silver sheets, designed by in situ layer-by-layer assembly on the surface of polypropylene (PP) nonwoven fabric. The Ag@Fe3O4-MS sensor has fish-scale-like silver sheets as self-assembling electrode layers on the upper and lower sides of fabric, which can be tailored into various shapes and integrated into other flexible electronics. The sensor provides a real-time monitoring strategy for early warning fire detection (below 100 °C). At room temperature, the fabricated Ag@Fe3O4-MS sensor is electrically insulating, while it switches to an electrical conductor when exposed to flame. In view of its fast response time (2 s) and sustained working time (at least 15 min), the sensor with a connected alarm light can immediately alert people of house fires. More importantly, this sensor can provide additional real-time information on the fire location and reliable real-time monitoring of fire rekindling. The sensor was exposed to fire for successive cycles with an average response of I = 43 mA, confirming the reliable repeatability to detect fires. This ultralight, flexible Ag@Fe3O4-MS sensor could have broad applications in home safety. Moreover, the sandwichlike design provides a reliable strategy to modify household fabric items to provide a fire warning function.

Flexible and Highly Sensitive Humidity Sensor Based on Sandwich-Like Ag/Fe3O4 Nanowires Composite for Multiple Dynamic Monitoring.

Functional textiles with unique functions, including free cutting, embroidery and changeable shape, will be attractive for smart wear of human beings. Herein, we fabricated a sandwich-like humidity sensor made from silver coated one-dimensional magnetite nanowire (Fe3O4 NW) arrays which were in situ grown on the surface of modified polypropylene nonwoven fabric via simultaneous radiation induced graft polymerization and co-precipitation. The humidity sensor exhibits an obvious response to the relative humidity (RH) ranging from RH 11% to RH 95% and its response value reaches a maximum of 6600% (ΔI/I0) at 95% relative humidity (RH). The humidity sensor can be tailored into various shapes and embroidered on its surface without affecting its functionalities. More interesting, the intensity of its response is proportional to the size of the material. These features permit the sensor to be integrated into commercial textiles or a gas mask to accurately monitor a variety of important human activities including respiration, blowing, speaking and perspiration. Moreover, it also can distinguish different human physical conditions by recognizing respiration response patterns. The sandwich-like sensor can be readily integrated with textiles to fabricate promising smart electronics for human healthcare.

An efficient and reusable quaternary ammonium fabric adsorbent prepared by radiation grafting for removal of Cr(VI) from wastewater.

A novel quaternary ammonium polyethylene nonwoven fabric for removing chromium ions from water was prepared via radiation-induced grafting of glycidyl methacrylate and further modification with N,N'-dimethylethylenediamine. The structural and morphological characteristics of the adsorbent were analyzed using Fourier transform infrared spectroscopy (FTIR), thermogravimetry and differential thermogravimetry (TG/DTG), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The influences of several principal factors, including pH value, initial Cr(VI) concentration, contact time, and coexisting anions (including SO42-, CO32-, NO3-, PO43-, and Cl-), on adsorption performance were investigated via batch tests. The results showed that the optimum removal efficiency was 99.2% at pH 3 and the maximum adsorption quantity for Cr(VI) at 25 °C was 336 mg/g. The adsorption kinetic parameters were better fitted with the pseudo-second-order kinetic model, and the equilibrium data were described very well by the Freundlich isotherm model. Furthermore, the as-synthesized adsorbent exhibited excellent regeneration and recyclability while maintaining high adsorption performance after five adsorption/desorption cycles.

Preparation and characterization of superhydrophobic organic-inorganic hybrid cotton fabrics via γ-radiation-induced graft polymerization.

A new kind of non-fluorine-based organic-inorganic hybrid superhydrophobic cotton fabric was successfully prepared by simultaneous radiation-induced graft polymerization of γ-methacryloxypropyl trimethoxy silane (MAPS) and subsequent end-capping modification with hexamethyldisilazane (HMDS). The chemical structure and surface topography of the pristine and modified cotton fabrics were investigated in detail by ATR-FTIR, XPS, (29)Si NMR, SEM and TGA to confirm that the graft reaction and end-capping modification had taken place. The above results demonstrated that the grafting polymerization and following end-capping reaction were completed, and a grafting layer was immobilized onto the surface of the cotton fabric. Surface wettability measurement and oil-water separation showed that the modified cotton surface not only exhibited the superhydrophobicity with a water contact angle of 165°, but also afforded a high efficiency of oil-water separation (96%). In particular, this modified cotton fabric retains superhydrophobicity even after 30 laundering cycles or 400 cycles of abrasion.

Rapid Determination of Dichlofluanid Residues in Vegetables Using Dispersive-SPE Sample Preparation Combined with Gas Chromatography-Mass Spectrometry.

A method for rapid determination of dichlofluanid residue in vegetables using dispersive solid-phase extraction (dispersive-SPE) sample preparation combined with gas chromatography-mass spectrometry (GC-MS) was developed. Samples were extracted with actone-ethyl acetate (1:1, V/V), and then detected by GC-MS with an external standard method after being purified by optimized primary secondary amine, graphitized carbon black and anhydrous magnesium sulphate (MgSO4). It turned out that dichlofluanid showed a good linearity (y= 2.7E+ 5x- 2710.5) over the range of 0.02-2.00 mg/L with a correlation coefficient of 0.9994. The limit of detection was 0.13 µg/kg (S/N = 3) and the limit of quantification was 0.43 µg/kg (S/N = 10). The recoveries of the dichlofluanid were in the range of 73.3-106.7, 83.3-116.7 and 83.3 ∼ 106.7% with the spiked levels of 0.01, 0.02 and 0.05 mg/kg, and the relative standard deviations were in the range of 4.1-22.3%. Compared with the reported literature, the method is more simple, rapid, sensitive, reliable and can be applied to many vegetables.