Comparison of minimally invasive transforaminal lumbar interbody fusion and midline lumbar interbody fusion in patients with spondylolisthesis.

BACKGROUND: This study aimed to compare surgical outcomes, clinical outcomes, and complications between minimally invasive transforaminal lumbar interbody fusion (MIS TLIF) and midline lumbar interbody fusion (MIDLIF) in patients with spondylolisthesis. METHODS: This study retrospectively compared the patients who underwent MIS TLIF (n = 37) or MIDLIF (n = 50) for spinal spondylolisthesis. Data of surgical outcomes (postoperative one-year fusion rate and time to bony fusion), clinical outcomes (visual analog scale [VAS] for pain and Oswestry Disability Index [ODI] for spine function), and complications were collected and analyzed. RESULTS: There was more 2-level fusion in MIDLIF (46% vs. 24.3%, p = 0.038). The MIS TLIF and MIDLIF groups had similar one-year fusion rate and time to fusion. The MIDLIF group had significantly lower VAS at postoperative 3-months (2.2 vs. 3.1, p = 0.002) and postoperative 1-year (1.1 vs. 2.1, p = < 0.001). ODI was not significantly different. The operation time was shorter in MIDLIF (166.1 min vs. 196.2 min, p = 0.014). The facet joint violation is higher in MIS TLIF (21.6% vs. 2%, p = 0.009). The other complications were not significantly different including rate of implant removal, revision, and adjacent segment disease. CONCLUSION: In this study, postoperative VAS, operation time, and the rate of facet joint violation were significantly higher in the MIS TLIF group. Comparable outcomes were observed between MIDLIF and MIS TLIF in terms of fusion rate, time to fusion, and postoperative ODI score.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles.

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

Surgical stabilization of the ipsilateral scapula and rib fractures using the mirror Judet approach: a preliminary result.

BACKGROUND: We report our preliminary results using a single approach, the mirror Judet approach, for patients with both ipsilateral scapula and multiple rib fractures. METHODS: Five consecutive patients [median age: 56 years (range: 44 ~ 60)] with ipsilateral scapula and multiple rib fractures that met the surgical indications were retrospectively reviewed. A single approach, the mirror Judet approach, was used for surgical stabilization of the scapula and targeted rib fractures. Thoracoscopic surgery was performed first for management of associated lung lesions and marking the targeted rib. All patients received the same rehabilitation protocol and a minimum 12-month follow-up. RESULTS: All surgically-fixed fractures eventually united without malunion. No complaints of intercostal neuralgia, infection, or other complications were seen. The mean range of motion in the injured shoulder returned to at least 90% of the contralateral side range. The mean Disabilities of the Arm, Shoulder, and Hand score at the 12th month was 2.0 (range: 0-7). All patients were able to return to their previous work. CONCLUSION: The mirror Judet approach allows for the surgical stabilization of the ipsilateral scapula and multiple rib fractures using the same approach and provides acceptable functional outcomes in well-selected patients. LEVEL OF EVIDENCE: Level IV.

Antibacterial polypeptide/heparin composite hydrogels carrying growth factor for wound healing.

We report an efficient growth factor delivering system based on polypeptide/heparin composite hydrogels for wound healing application. Linear and star-shaped poly(l-lysine) (l-PLL and s-PLL) were chosen due to not only their cationic characteristics, facilitating the efficient complexation of negatively charged heparin, but also the ease to tune the physical and mechanical properties of as-prepared hydrogels simply by varying polypeptide topology and chain length. The results showed that polymer topology can be an additional parameter to tune hydrogel properties. Our experimental data showed that these composite hydrogels exhibited low hemolytic activity and good cell compatibility as well as excellent antibacterial activity, making them ideal as wound dressing materials. Unlike other heparin-based hydrogels, these composite hydrogels with heparin densely deposited on the surface can increase the stabilization and concentration of growth factor, which can facilitate the healing process as confirmed by our in vivo animal model. We believe that these PLL/heparin composite hydrogels are promising wound dressing materials and may have potential applications in other biomedical fields.

Clinical feasibility of the augmented reality computer-assisted spine surgery system for percutaneous vertebroplasty.

PURPOSE: This study aimed to demonstrate that the augmented reality computer-assisted spine surgery (ARCASS) system is clinically feasible for percutaneous vertebroplasty (PVP). METHODS: This prospective case-control study included the patients undergoing PVP under the assistance of the ARCASS system between July 1, 2013, and October 31, 2014. The control group was the age- and gender-matched patients who underwent standard PVP and met the same eligible criteria as the case group. Primary outcome was the frequency of fluoroscopy. Secondary outcomes were the accuracy of bony entry point and operative time. RESULTS: Eighteen patients were included in this study: 9 patients with 11 levels of lesions in the ARCASS group and 9 patients with 10 levels of lesions in the control group. Compared with the control group, the ARCASS group had significantly less frequency of fluoroscopy (6 vs. 18, P < 0.001) and shorter operative time (78 vs. 205 s, P < 0.001) during the process of entry point identification and local anesthesia, which started from the registration of skin entry point at lesion site to the end of bony entry point identification. Regarding accuracy, the ARCASS group had significant greater proportion of 'good' entry point than the control group on lateral views (81.8% vs. 30.0%, P = 0.028) and anteroposterior views (72.7% vs. 20.0%, P = 0.020). CONCLUSION: This study revealed that the ARCASS system was clinically feasible for PVP. The guidance of ARCASS system provided more accurate bony entry point with reduced operative time and unnecessary radiation exposure.

Incorporation of Collagen in Calcium Phosphate Cements for Controlling Osseointegration.

In this study, we investigated the effect of supplementing a non-dispersive dicalcium phosphate-rich calcium phosphate bone cement (DCP-rich CPC) with type I collagen on in vitro cellular activities and its performance as a bone graft material. Varying amounts of type I collagen were added during the preparation of the DCP-rich CPC. In vitro cell adhesion, morphology, viability, and alkaline phosphatase (ALP) activity were evaluated using progenitor bone cells. Bone graft performance was evaluated via a rat posterolateral lumbar fusion model and osteointegration of the implant. New bone formations in the restorative sites were assessed by micro-computed tomography (micro-CT) and histological analysis. We found that the incorporation of collagen into the DCP-rich CPC was associated with increased cell adhesion, cell viability, and ALP activity in vitro. The spinal fusion model revealed a significant increase in bone regeneration. Additionally, better osseointegration was observed between the host bone and graft with the DCP-rich CPC supplemented with collagen than with the collagen-free DCP-rich CPC control graft. Furthermore, compared to the control graft, the results of micro-CT showed that a smaller amount of residual material was observed with the collagen-containing DCP-rich CPC graft compared with the control graft, which suggests the collagen supplement enhanced new bone formation. Of the different mixtures evaluated in this study (0.8 g DCP-rich CPC supplemented with 0.1, 0.2, and 0.4 mL type I collagen, respectively), DCP-rich CPC supplemented with 0.4 mL collagen led to the highest level of osteogenesis. Our results suggest that the DCP-rich CPC supplemented with collagen has potential to be used as an effective bone graft material in spinal surgery.

Comparison of three calcium phosphate bone graft substitutes from biomechanical, histological, and crystallographic perspectives using a rat posterolateral lumbar fusion model.

This study evaluated the effectiveness of three calcium phosphate bone graft substitutes with different chemical compositions on spinal fusion using a rat posterolateral lumbar fusion model. Specifically, two recently developed non-dispersive tetracalcium phosphate/dicalcium phosphate anhydrous-based calcium phosphate cements (CPCs), namely a CPC consisting of equimolar amounts of the two compounds (nd-CPC) and a CPC consisting of a two-fold greater amount of dicalcium phosphate anhydrous (DCP-rich CPC), were compared with a commercial calcium phosphate bone graft (c-CPG) consisting of hydroxyapatite (60%) and ß-tricalcium phosphate (40%). Single-level posterolateral lumbar fusion was performed at the L4-L5 vertebrae in fifteen adult rats (n=5 for each group). Spinal fusion was evaluated with radiographs, manual palpation, mechanical testing, micro-CT, and histology 8 weeks post-surgery. In particular, the crystallographic phases in the three substitutes were identified before and 8 weeks after their implantation. Manual palpation revealed stable constructs in nearly all of the spine specimens. The stiffness and bending load of fused spines in the two CPC groups were comparable to those in the c-CPG group. The radiographs specifically revealed implant resorption and bone remodeling in the DCP-rich CPC group. Analysis of 3D micro-CT images revealed that the bone volume ratio in the DCP-rich CPC group was significantly greater than those in the nd-CPC and c-CPG groups. Histology showed that the DCP-rich CPC group exhibited the highest degree of bone regeneration and osseointegration. Notably, DCP-rich CPC led to a pronounced phase transformation, generating the greatest amount of poorly crystalline apatite among the three groups, which together with adequate resorption may explain the aforementioned positive findings. We therefore conclude that of the bone graft substitutes considered, DCP-rich CPC has the greatest potential to be used in spinal fusion.

Real-time advanced spinal surgery via visible patient model and augmented reality system.

This paper presents an advanced augmented reality system for spinal surgery assistance, and develops entry-point guidance prior to vertebroplasty spinal surgery. Based on image-based marker detection and tracking, the proposed camera-projector system superimposes pre-operative 3-D images onto patients. The patients' preoperative 3-D image model is registered by projecting it onto the patient such that the synthetic 3-D model merges with the real patient image, enabling the surgeon to see through the patients' anatomy. The proposed method is much simpler than heavy and computationally challenging navigation systems, and also reduces radiation exposure. The system is experimentally tested on a preoperative 3D model, dummy patient model and animal cadaver model. The feasibility and accuracy of the proposed system is verified on three patients undergoing spinal surgery in the operating theater. The results of these clinical trials are extremely promising, with surgeons reporting favorably on the reduced time of finding a suitable entry point and reduced radiation dose to patients.

Polymethylmethacrylate augmentation of the pedicle screw: the cement distribution in the vertebral body.

Many studies have proven that the polymethylmethacrylate (PMMA) augmentation of the pedicle screw can significantly increase stiffness and strength of spinal fixation. Some major complications have also been reported. However, there are no reports discussing cement distribution and its morphology in the osteoporotic vertebral body, which is critical in the analysis of the biomechanical strength of the pedicle screw and the risk of cement leakage after pedicle screw augmentation. In this study, we used computed tomography (CT) to evaluate the cement distribution in the osteoporotic vertebral body after PMMA augmentation of a pedicle screw and to analyze the factors leading to cement leakage. Two groups of patients were studied. Group A consisted 25 osteoporotic patients (mean age of 73 years) with spinal instrumentation who had a total of 145 pedicle screws and cement augmentation with biopsy needles. Group B consisted of 23 osteoporotic patients (mean age of 74.6 years) with spinal instrumentation who had a total of 125 cannulated pedicle screws with cement augmentation. All patients had CT evaluation of the cement distribution in the vertebral body after the surgery. The cement distribution in the vertebrae was divided into four zones in the axial CT view: anterior one-third, middle third, and posterior third of vertebral body, and the pedicle. The morphology of the cement distribution around the pedicle screw was defined as scattered type or concentrate type. The leakage pattern was divided to anterior-lateral, posterior-lateral, and canal leakage. The correlations among bone mineral density (BMD), the cement leakage rate, and cement distribution morphology were also analyzed. The results showed that most augmented pedicle screws had cement extension into three of the four zones of the vertebral body (66.3%), followed by two zones (20%), all four zones (11.5%), and only one zone (2.2%). Overall, 123 screws (84.8%) in Group A and 108 screws (86.4%) in Group B had cement concentrate type distribution. The cement leakage rate in Group A is 18.3% and 13.6% in Group B. Patients with a BMD <0.6 g/cm(2) had significantly higher rates of cement leakage and tended toward a scattered cement distribution. There was only one patient who had a symptomatic leakage (sciatica) in Group B. We concluded that the cement distribution after pedicle screw augmentation with biopsy needle or cannulated screw technique was mostly localized in three zones of the vertebral body, and patients with lower BMD had a higher risk of cement leakage and scattered cement distribution.