Aluminum Corrosion Chemistry in High-Voltage Lithium Metal Batteries with LiFSI-Based Ether Electrolytes.

High-voltage Li metal batteries (LMBs) based on ether electrolytes hold potential for achieving high energy densities exceeding 500 Wh kg-1, but face challenges with electrolyte oxidative stability, particularly concerning aluminum (Al) current collector corrosion. However, the specific chemistry behind Al corrosion and its effect on electrolyte components remains unexplored. Here, our study delves into Al corrosion in the representative LiFSI-DME electrolyte system, revealing that low-concentration electrolytes exacerbate Al current collector corrosion and solvent decomposition. In contrast, high-concentration electrolytes mitigate these issues, enhancing long-term stability. Remarkably, LiFSI-0.7DME electrolyte demonstrates exceptional stability with up to 1000 cycles at high voltage without significant capacity decay. These findings offer crucial insights into Al corrosion mechanisms in ether-based electrolytes, advancing our comprehension of high-voltage LMBs and facilitating their development for practical applications.

Amorphous Chloride Solid Electrolytes with High Li-Ion Conductivity for Stable Cycling of All-Solid-State High-Nickel Cathodes.

Solid electrolytes (SEs) are central components that enable high-performance, all-solid-state lithium batteries (ASSLBs). Amorphous SEs hold great potential for ASSLBs because their grain-boundary-free characteristics facilitate intact solid-solid contact and uniform Li-ion conduction for high-performance cathodes. However, amorphous oxide SEs with limited ionic conductivities and glassy sulfide SEs with narrow electrochemical windows cannot sustain high-nickel cathodes. Herein, we report a class of amorphous Li-Ta-Cl-based chloride SEs possessing high Li-ion conductivity (up to 7.16 mS cm-1) and low Young's modulus (approximately 3 GPa) to enable excellent Li-ion conduction and intact physical contact among rigid components in ASSLBs. We reveal that the amorphous Li-Ta-Cl matrix is composed of LiCl43-, LiCl54-, LiCl65- polyhedra, and TaCl6- octahedra via machine-learning simulation, solid-state 7Li nuclear magnetic resonance, and X-ray absorption analysis. Attractively, our amorphous chloride SEs exhibit excellent compatibility with high-nickel cathodes. We demonstrate that ASSLBs comprising amorphous chloride SEs and high-nickel single-crystal cathodes (LiNi0.88Co0.07Mn0.05O2) exhibit ∼99% capacity retention after 800 cycles at ∼3 C under 1 mA h cm-2 and ∼80% capacity retention after 75 cycles at 0.2 C under a high areal capacity of 5 mA h cm-2. Most importantly, a stable operation of up to 9800 cycles with a capacity retention of ∼77% at a high rate of 3.4 C can be achieved in a freezing environment of -10 °C. Our amorphous chloride SEs will pave the way to realize high-performance high-nickel cathodes for high-energy-density ASSLBs.