Hybrid supercapacitors using metal-organic framework derived nickel-sulfur compounds.

HYPOTHESIS: Metal-organic frameworks (MOFs) are highly suitable precursors for supercapacitor electrode materials owing to their high porosity and stable backbone structures that offer several advantages for redox reactions and rapid ion transport. EXPERIMENTS: In this study, a carbon-coated Ni9S8 composite (Ni9S8@C-5) was prepared via sulfuration at 500 ℃ using a spherical Ni-MOF as the sacrificial template. FINDING: The stable carbon skeleton derived from Ni-MOF and positive structure-activity relationship due to the multinuclear Ni9S8 components resulted in a specific capacity of 278.06 mAh·g-1 at 1 A·g-1. Additionally, the hybrid supercapacitor (HSC) constructed using Ni9S8@C-5 as the positive electrode and the laboratory-prepared coal pitch-based activated carbon (CTP-AC) as the negative electrode achieved an energy density of 69.32 Wh·kg-1 at a power density of 800.06 W·kg-1, and capacity retention of 83.06 % after 5000 cycles of charging and discharging at 5 A·g-1. The Ni-MOF sacrificial template method proposed in this study effectively addresses the challenges associated with structural collapse and agglomeration of Ni9S8 during electrochemical reactions, thus improving its electrochemical performance. Hence, a simple preparation method is demonstrated, with broad application prospects in supercapacitor electrodes.

Prescription pattern and effectiveness of antihypertensive drugs in patients with aortic dissection who underwent surgery.

Background: Surgical patients with aortic dissection often require multiple antihypertensive drugs to control blood pressure. However, the prescription pattern and effectiveness of antihypertensive drugs for these patients are unclear. We aimed to investigate the prescription pattern and effectiveness of different classes of antihypertensive drugs in surgical patients with aortic dissection. Methods: Newly diagnosed aortic dissection patients who underwent surgery, aged >20 years, from 1 January 2012 to 31 December 2017 were identified. Patients with missing data, in-hospital mortality, aortic aneurysms, or congenital connective tissue disorders, such as Marfan syndrome, were excluded. Prescription patterns of antihypertensive drugs were identified from medical records of outpatient visits within 90 days after discharge. Antihypertensive drugs were classified into four classes: 1) ß-blockers, 2) calcium channel blockers (CCBs), 3) renin-angiotensin system, and 4) other antihypertensive drugs. Patients were classified according to the number of classes of antihypertensive drugs as follows: 1) class 0, no exposure to antihypertensive drugs; 2) class 1, antihypertensive drugs of the same class; 3) class 2, antihypertensive drugs of two classes; 4) class 3, antihypertensive drugs of three classes; or 5) class 4, antihypertensive drugs of four classes. The primary composite outcomes included rehospitalization associated with aortic dissection, death due to aortic dissection, and all-cause mortality. Results: Most patients were prescribed two (28.87%) or three classes (28.01%) of antihypertensive drugs. In class 1, ß-blockers were most commonly used (8.79%), followed by CCBs (5.95%). In class 2, ß-blockers+CCB (10.66%) and CCB+RAS (5.18%) were the most common drug combinations. In class 3, ß-blockers + CCB+RAS (14.84%) was the most prescribed combination. Class 0 had a significantly higher hazard of the composite outcome (HR, 2.1; CI, 1.46-3.02; p < 0.001) and all-cause mortality (HR, 2.34; CI, 1.56-3.51; p < 0.001) than class 1. There were no significant differences in hazards for rehospitalization associated with aortic dissection among classes. Conclusion: Among operated patients with type A aortic dissection, no specific type of antihypertensive drug was associated with a better outcome, whereas among those with type B aortic dissection, the use of ß-blockers and CCBs was related to a significantly lower risk of the composite outcome.

Evaluating Prescription Pattern and Effectiveness of Antihypertensive Drugs in Non-Operated Aortic Dissection Patients.

INTRODUCTION: Aortic dissection (AD) is a life-threatening disease. However, the effectiveness of different strategies of antihypertensive therapies in non-operated AD patients is still unclear. MATERIALS AND METHODS: Patients were classified into five groups (groups 0-4) based on the number of classes of antihypertensive drugs, including ß-blockers, renin-angiotensin system (RAS) agents (angiotensin-converting enzyme inhibitors (ACEIs), angiotensin II receptor blockers (ARBs), and the renin-inhibitors), calcium channel blockers (CCBs), and other antihypertensive drugs, were prescribed within 90 days after discharge. The primary endpoint was a composite outcome of re-hospitalization associated with AD, referral for aortic surgery, and all-cause death. RESULTS: A total of 3932 non-operated AD patients were included in our study. The most prescribed antihypertensive drugs were CCBs, followed by ß-blockers and ARBs. Within group 1, compared to other antihypertensive drugs, patients using RAS agents (aHR, 0.58; p = 0.005) had a significantly lower risk of occurrence of the outcome. Within group 2, the risk of composite outcomes was lower in patients using ß-blockers + CCBs (aHR, 0.60; p = 0.004) or CCBs + RAS agents (aHR, 0.60; p = 0.006) than in those using RAS agents + others. CONCLUSION: For non-operated AD patients, RAS agents, ß-blockers, or CCBs should be given in a different strategy of combinations to reduce the hazard of AD-related complications compared to other agents.

Stable Room-Temperature Sodium-Sulfur Batteries in Ether-Based Electrolytes Enabled by the Fluoroethylene Carbonate Additive.

Because of its high energy density and low cost, the room-temperature sodium-sulfur (RT Na-S) battery is a promising candidate to power the next-generation large-scale energy storage system. However, its practical utilization is hampered by the short life span owing to the severe shuttle effect, which originates from the "solid-liquid-solid" reaction mechanism of the sulfur cathode. In this work, fluoroethylene carbonate is proposed as an additive, and tetraethylene glycol dimethyl ether is used as the base solvent. For the sulfurized polyacrylonitrile cathode, a robust F-containing cathode-electrolyte interphase (CEI) forms on the cathode surface during the initial discharging. The CEI prohibits the dissolution and diffusion of the soluble intermediate products, realizing a "solid-solid" reaction process. The RT Na-S cell exhibits a stable cycling performance: a capacity of 587 mA h g-1 is retained after 200 cycles at 0.2 A g-1 with nearly 100% Coulombic efficiency.

Post-Synthetic and In Situ Vacancy Repairing of Iron Hexacyanoferrate Toward Highly Stable Cathodes for Sodium-Ion Batteries.

Iron hexacyanoferrate (FeHCF) is a promising cathode material for sodium-ion batteries. However, FeHCF always suffers from a poor cycling stability, which is closely related to the abundant vacancy defects in its framework. Herein, post-synthetic and in-situ vacancy repairing strategies are proposed for the synthesis of high-quality FeHCF in a highly concentrated Na4Fe(CN)6 solution. Both the post-synthetic and in-situ vacancy repaired FeHCF products (FeHCF-P and FeHCF-I) show the significant decrease in the number of vacancy defects and the reinforced structure, which can suppress the side reactions and activate the capacity from low-spin Fe in FeHCF. In particular, FeHCF-P delivers a reversible discharge capacity of 131 mAh g-1 at 1 C and remains 109 mAh g-1 after 500 cycles, with a capacity retention of 83%. FeHCF-I can deliver a high discharge capacity of 158.5 mAh g-1 at 1 C. Even at 10 C, the FeHCF-I electrode still maintains a discharge specific capacity of 103 mAh g-1 and retains 75% after 800 cycles. This work provides a new vacancy repairing strategy for the solution synthesis of high-quality FeHCF.

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification.

Nickel-rich Li(NixCoyMn1-x-yO2) (x ≥ 0.6) is considered to be a predominant cathode for next-generation lithium-ion batteries (LIBs) due to its towering specific energy density. Unfortunately, serious structural degradation causes rapid capacity degradation with the increase in nickel content. Herein, a Co and Ti co-modified LiNi0.8Co0.1Mn0.1O2 (NCM-811) cathode ameliorates the reversible capacity together with the rate capability by obviously alleviating the lattice structure degradation and microscopic intergranular cracks. Further studies show that the titanium doping effectively reduces the cation mixing and also stabilizes the crystal structure, while the spinel phase formed at the surface by a cobalt oxide coating is much stable than the layered phase at high voltage, which can alleviate the generation of micro-cracks. After 0.5% Co oxide coating and 1% Ti doping (T1Co0.5-NCM), a superior rate capability (121.75 mA h g-1 at 20 C between 2.7 and 4.5 V) and predominant capacity retention (74.2%) are observed compared with the pristine NCM-811 (59.5%) after 400 cycles between 2.7 and 4.7 V. This work supplies an eminent design of high-voltage and high-rate layered cathode materials and has a huge application prospect in the next generation of high-energy LIBs.

An electrochemical sensor for ifosfamide, acetaminophen, domperidone, and sumatriptan based on self-assembled MXene/MWCNT/chitosan nanocomposite thin film.

New multi-walled carbon nanotubes supported on Ti3C2-MXene and chitosan (chit) composite film-based electrochemical sensor for ifosfamide (IFO), acetaminophen (ACOP), domperidone (DOM), and sumatriptan (SUM) have been developed. Ti3C2-MXene was synthesized by a fluoride method. Structural and chemical characterizations suggested the successful preparation of Ti3C2-MXene with clearly seen layered morphology, defined 0 0 2 diffraction peak at 7.5° and complete absence of 1 0 4 plane at 39°. The electrochemical performance of the sensor was investigated by cyclic voltammetry and adsorptive stripping differential pulse voltammetry. The Ti3C2/MWCNT/Chit modified glassy carbon electrode exhibits enhanced electrocatalytic activities toward the oxidation of target analytes. Excellent conductivity, large surface area, and high catalytic properties of the Ti3C2-MXene showed synergistic effects with MWCNTs and helped in achieving low detection limits of targets with high selectivity and reproducibility. The assay allows determination of IFO, ACOP, DOM, and SUM in the concentration ranges 0.0011-1.0, 0.0042-7.1, 0.0046-7.3, and 0.0033-61 µM with low detection limits of 0.00031, 0.00028, 0.00034, and 0.00042 µM, respectively. The sensor was successfully applied for voltammetric screening of target analytes in urine and blood serum samples with recoveries > 95.21%. Schematic illustration of the synthesis of self-assembled MXene/MWCNT/chitosan nanocomposite is given and its application to the voltammetric determination of ifosfamide, acetaminophen, domperidone, and sumatriptan described. Graphical abstract.

In Situ FTIR-Assisted Synthesis of Nickel Hexacyanoferrate Cathodes for Long-Life Sodium-Ion Batteries.

Prussian blue analogs (PBAs) with stable framework structures are ideal cathodes for rechargeable sodium-ion batteries. The chelating agent-assisted coprecipitate method is an effective way to obtain low-defect PBAs that can limit the appearance of too many vacancies and water molecules and achieve an optimized Na-storage performance. However, for this method, the mechanism of chelating agent-assisted synthesis is still unclear. Herein, the synthesis process of nickel hexacyanoferrate (NiHCF) has been investigated by in situ infrared spectroscopy detection. The results show that the chelating agent oxalate slows down the nucleation process and effectively inhibits the formation of the Fe-C≡N-Ni frame in the aging process, producing highly crystallized and low-defect NiHCF samples. High-quality NiHCF presents a high specific capacity of 86.3 mAh g-1 (a theoretical value of ∼85 mAh g-1), an ultrastable cyclic retention of 90% over 800 cycles, and a remarkable high capacity retention of 74.6% at a current density of 4250 mA g-1 (50C). Particularly, the NiHCF//hard carbon full cell presents a high specific energy density of over 210 Wh kg-1 and an outstanding cyclic stability without obvious capacity attenuation over 1000 cycles.

Full-Cell Cycling of a Self-Supporting Aluminum Foil Anode with a Phosphate Conversion Coating.

Aluminum foil is a promising candidate anode material for lithium-ion batteries (LIBs), due to its high theoretical capacity, low lithiation voltage, and abundance. However, as a matter of fact, it has been a great challenge to make Al foil cycle in full cells at industrially acceptable areal capacities of 2-4 mAh/cm2 for commercial 18650 LIBs and some high-power LIBs. In this study, we defined the concepts of electrochemical true contact area (ECA) (areas with perfect electrolyte/electrode contact) and electrochemical noncontact area (ENA) (referred to regions without electrolyte spread on) for the metal foil anode. An initial ECA/ENA partition would cause severe inhomogeneity of the alloying reaction, cause localized electrode pulverization, and exacerbate ECA/ENA inequality even more. Through a phosphate conversion coating on aluminum foil, we killed two birds with one stone: first, the Al foil with a phosphate conversion coating has improved wettability (characterized by the contact angle that decreased from 35.2 to 15.9°) and favors the elimination of ENA, thus guaranteeing uniform electrochemical contact; also, the coating functions as an artificial solid electrolyte interface, which stabilizes the fragile naturally formed solid electrolyte interface and a "steady-state" electrolyte/electrode interface. Therefore, when pairing the phosphated Al foil anode against a commercial LiFePO4 (LFP) cathode (with ∼2.65 mAh/cm2), it can cycle 120 times without Li excess and stabilizes at 1.27 mAh/cm2.

Ether-compatible sulfurized polyacrylonitrile cathode with excellent performance enabled by fast kinetics via selenium doping.

Sulfurized polyacrylonitrile is suggested to contain Sn (n ≤ 4) and shows good electrochemical performance in carbonate electrolytes for lithium sulfur batteries. However inferior results in ether electrolytes suggest that high solubility of Li2Sn (n ≤ 4) trumps the limited redox conversion, leading to dissolution and shuttling. Here, we introduce a small amount of selenium in sulfurized polyacrylonitrile to accelerate the redox conversion, delivering excellent performance in both carbonate and ether electrolytes, including high reversible capacity (1300 mA h g-1 at 0.2 A g-1), 84% active material utilization and high rate (capacity up to 900 mA h g-1 at 10 A g-1). These cathodes can undergo 800 cycles with nearly 100% Coulombic efficiency and ultralow 0.029% capacity decay per cycle. Polysulfide dissolution is successfully suppressed by enhanced reaction kinetics. This work demonstrates an ether compatible sulfur cathode involving intermediate Li2Sn (n ≤ 4), attractive rate and cycling performance, and a promising solution towards applicable lithium-sulfur batteries.

A Stable Lithium-Oxygen Battery Electrolyte Based on Fully Methylated Cyclic Ether.

Ether-based electrolytes are commonly used in Li-O2 batteries (LOBs) because of their relatively high stability. But they are still prone to be attacked by superoxides or singlet oxygen via hydrogen abstract reactions, which leads to performance decaying during long-term operation. Herein we propose a methylated cyclic ether, 2,2,4,4,5,5-hexamethyl-1,3-dioxolane (HMD), as a stable electrolyte solvent for LOBs. Such a compound does not contain any hydrogen atoms on the alpha-carbon of the ether, and thus avoids hydrogen abstraction reactions. As the result, this solvent exhibits excellent stability with the presence of superoxide or singlet oxygen. In addition the CO2 evolution during charge process is prohibited. The LOB with HMD-based electrolyte was able to run up to 157 cycles, 4 times more than with 1,3-dioxolane (DOL) or 1,2-dimethoxyethane (DME) based electrolytes.

Post-mastectomy Radiotherapy in T1-2 Breast Cancer Patients With One to Three Lymph Node Metastases: A Propensity Score Matching Analysis.

Background and Objectives: Whether post-mastectomy radiotherapy (PMRT) could improve prognosis for T1-2 breast cancer patients with one to three lymph node metastases remains controversial. The present study aimed to determine the significance of PMRT in patients with T1-2N1M0 breast cancer. Methods: Data of 45,646 patients from the Surveillance, Epidemiology, and End Results (SEER) database were analyzed; 12,585 matched patients were divided into a PMRT group and non-radiotherapy group (no-PMRT), respectively, using the propensity score matching method. Univariate and multivariate analyses were performed to determine the prognostic factors of breast cancer, and subgroup analysis was performed according to the number of lymph node metastases. Results: With the median follow-up of 62 months, 5-year cancer-specific survival was 91.48% in the PMRT group and 91.88% in the no-PMRT group (P = 0.405). PMRT did not improve the breast cancer-specific survival (BCSS) in patients with stage T1-2N1M0 (HR = 0.99, 95% CI = 0.92-1.06, P = 0.715). In subgroup analysis, radiotherapy improved the BCSS in patients with three nodes positive, with the 5-year BCSS at 88.5% in the radiation group and 86.6% in the no-radiation group (HR = 0.78, 95% CI = 0.65-0.90, P < 0.001). In patients with two nodes positive, 5-year BCSS was 90.3% in the PMRT group and 89.5% in the no-PMRT group, with no significant difference between the two groups (HR = 0.96, 95% CI = 0.85-1.09, P = 0.552). In patients with one node positive, 5-year BCSS was higher in the no-PMRT group (92.1%) than that in the PMRT group (90.8%); radiotherapy increased the cancer-related death compared with those who did not receive it (HR = 1.21, 95% CI = 1.08-1.36, P = 0.002). Conclusion: The benefit of PMRT in T1-2N1M0 patients was obviously different, and the recommendation of PMRT for this population should be individualized. PMRT should be considered for patients with three nodes positive, should be suggested cautiously in those with two nodes positive, and could be omitted in those with one node positive.

Constructing Hierarchical Tectorum-like α-Fe2 O3 /PPy Nanoarrays on Carbon Cloth for Solid-State Asymmetric Supercapacitors.

The design of complex heterostructured electrode materials that deliver superior electrochemical performances to their individual counterparts has stimulated intensive research on configuring supercapacitors with high energy and power densities. Herein we fabricate hierarchical tectorum-like α-Fe2 O3 /polypyrrole (PPy) nanoarrays (T-Fe2 O3 /PPy NAs). The 3D, and interconnected T-Fe2 O3 /PPy NAs are successfully grown on conductive carbon cloth through an easy self-sacrificing template and in situ vapor-phase polymerization route under mild conditions. The electrode made of the T-Fe2 O3 /PPy NAs exhibits a high areal capacitance of 382.4 mF cm-2 at a current density of 0.5 mA cm-2 and excellent reversibility. The solid-state asymmetric supercapacitor consisting of T-Fe2 O3 /PPy NAs and MnO2 electrodes achieves a high energy density of 0.22 mWh cm-3 at a power density of 165.6 mW cm-3 .

A Ternary Polyaniline/Active Carbon/Lithium Iron Phosphate Composite as Cathode Material for Lithium Ion Battery.

Lithium iron phosphate (LiFePO4) has been evaluated as the most promising cathode material for the next generation lithium-ion batteries because of its high operating voltage, good cycle performance, low cost, and environmentally friendly safety. However, pure LiFePO4 shows poor reversible capacity and charge/discharge performance at high current density. Many methods including optimization of particle size, introduction of coating carbon and conductive polymer, and the doping of metal and halogen ions have been developed to improve its electrochemical performance. In this study, conductive polymer polyaniline (PANI), active carbon and LiFePO4 (C-LFP/PANI) composite cathodes were successfully prepared by chemical oxidation method. Electrochemical performance shows that a remarkable improvement in capacity and rate performance can be achieved in the C-LFP/PANI composite cathodes with an addition of HCI. In comparison with C-LFP cathode, the C-LFP/PANI doped with HCl composite exhibits ca. 15% and 26% capacity enhancement at 0.2 C and 10 C, respectively.

The expression and significance of XIAP and C-jun on Condyloma acuminatum.

Objective of the study was to investigate the expression and significance of XIAP and c-jun in Condyloma acuminatum. The immunohistochemistry SABC method was adopted to detect the expression of XIAP and c-jun in Condyloma acuminatum. The positive expression rate of XIAP and c-jun in Condyloma acuminatum was 80% (32/40) and 90% (36/40) separately and the intensity of expression was usually ++ ~ +++. While in control group, the positive expression rate of XIAP and c-jun was 27.8% (5/18) and 16.7 % (3/18) separately, and the intensity of expression was - ~ ++. There was statistical significance of the positive expression rate and the expression intensity of XIAP and c-jun between the two groups (P<0.05). Besides, the positive correlation existed between expression of XIAP and c-jun (r=0.306 P<0.01). The over-expression of XIAP and c-jun in Condyloma acuminatum may be associated with the growth of Condyloma acuminatum.

Systematic investigation on Cadmium-incorporation in Li2FeSiO4/C cathode material for lithium-ion batteries.

Cadmium-incorporated Li2FeSiO4/C composites have been successfully synthesized by a solid-state reaction assisted with refluxing. The effect and mechanism of Cd-modification on the electrochemical performance of Li2FeSiO4/C were investigated in detail by X-ray powder diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, Raman spectra, transmission electron microscopy, positron annihilation lifetime spectroscopy and Doppler broadening spectrum, and electrochemical measurements. The results show that Cd not only exists in an amorphous state of CdO on the surface of LFS particles, but also enters into the crystal lattice of LFS. Positron annihilation lifetime spectroscopy and Doppler broadening spectrum analyses verify that Cd-incorporation increases the defect concentration and the electronic conductivity of LFS, thus improve the Li(+)-ion diffusion process. Furthermore, our electrochemical measurements verify that an appropriate amount of Cd-incorporation can achieve a satisfied electrochemical performance for LFS/C cathode material.

Circulating levels of inflammation-associated miR-155 and endothelial-enriched miR-126 in patients with end-stage renal disease

Circulating microRNAs (miRNAs) may represent a potential noninvasive molecular biomarker for various pathological conditions. Moreover, the detection of circulating miRNAs can provide important novel disease-related information. In particular, inflammation-associated miR-155 and endothelial-enriched miR-126 are reported to be associated with vascular homeostasis. Vascular damage is a common event described in end-stage renal disease (ESRD). We hypothesized that miR-155 and miR-126 may be detectable in the circulation and serve as potential biomarkers for risk stratification. In this study, we assessed miR-155 and miR-126 in the plasma of 30 ESRD patients and 20 healthy controls using real-time quantification RT-PCR. The circulating levels of miR-155 and miR-126 were significantly reduced in patients with ESRD compared to healthy controls. However, there was no significant difference of circulating miR-155 and miR-126 levels between prehemodialysis and posthemodialysis patients. Furthermore, both circulating miR-126 and miR-155 correlated positively with estimated glomerular filtration rate (miR-126: r = 0.383, P = 0.037; miR-155: r = 0.494, P = 0.006) and hemoglobin (miR-126: r = 0.515, P = 0.004; miR-155: r = 0.598, P < 0.001) and correlated inversely with phosphate level (miR-126: r = -0.675, P < 0.001; miR-155: r = -0.399, P = 0.029). Pearson’s correlation was used to compare circulating levels of miRNAs with clinical parameters. These results suggested that circulating miR-155 and miR-126 might be involved in the development of ESRD. Further studies are needed to demonstrate the role of circulating miR-155 and miR-126 as candidate biomarkers for risk estimation.

Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability.

Nitrogen-doped carbon nanofiber webs (CNFWs) with high surface areas are successfully prepared by carbonization-activation of polypyrrole nanofiber webs with KOH. The as-obtained CNFWs exhibit a superhigh reversible capacity of 943 mAh g(-1) at a current density of 2 A g(-1) even after 600 cycles, which is ascribed to the novel porous nanostructure and high-level nitrogen doping.