Correlation Analysis between Three-Dimensional Changes in Pharyngeal Airway Space and Skeletal Changes in Patients with Skeletal Class II Malocclusion following Orthognathic Surgery.

INTRODUCTION: Studies on the pharyngeal airway space (PAS) changes using three-dimensional computed tomography (CT) have shed more light on patients with Class III than Class II malocclusion. This paper focuses on analyzing the long-term changes in the PAS and evaluating the postoperative association between these PAS and skeletal changes in patients with skeletal Class II malocclusion who have undergone orthognathic surgery. METHODS: The records of 21 patients with skeletal Class II malocclusion who had undergone orthognathic surgery were included. The anatomical modifications in both jaws, changes in volume, sectional area (SA), minimum sectional area (MSA), and anterior-posterior (AP) and transverse (TV) width in the airway at one month before surgery (T0), and one month (T1) and one year (T2) after surgery were analyzed using CT images. The association between the skeletal and airway changes was evaluated between T0, T1, and T2. RESULTS: After surgery, the ANS, A point, and PNS demonstrated significant posterior and superior movement. The B point and the pogonion exhibited substantial anterior and superior movement. The total and inferior oropharyngeal volumes (vol 3, vol 4) notably increased, while the nasopharyngeal volume (vol 1) decreased. The anterior-posterior movement at the ANS and PNS after surgery was significantly associated with the total volume, vol 2, vol 3, SA 1, MSA, and TV width 1, while substantial association with the total volume was found at the pogonion. CONCLUSION: Thus, an ideal treatment plan can be formulated for patients with skeletal Class II malocclusion by considering the postoperative PAS changes.

Surgical treatment of a skeletal Class III patient using customized brackets based on the CAD/CAM virtual orthodontic system.

The computer-aided design/computer-aided manufacturing (CAD/CAM) virtual orthodontic system produces customized brackets, indirect bonding jigs, and archwires based on a three-dimensional virtual setup. In surgical cases, this system helps to visualize the final occlusion during diagnosis and to efficiently plan individualized presurgical orthodontic treatments. A 20-year-old female patient with a skeletal Class III malocclusion, maxillary protrusion, and lip protrusion was successfully treated with orthognathic surgery and orthodontic treatment with maxillary first premolar extractions. The CAD/CAM system was applied for efficient treatment, with a total active treatment time of 16 months. In this case report, the applicability of the CAD/CAM virtual orthodontic system for orthognathic surgery cases is demonstrated. Suggestions are also made to overcome the limitations and to maximize the advantages of this system during orthodontic treatment of patients undergoing orthognathic surgery.

Clinical applications of miniscrews that broaden the scope of non-surgical orthodontic treatment.

Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.

Differences in soft-tissue thickness changes after bimaxillary surgery between patients with vertically high angle and normal angle.

INTRODUCTION: We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. METHODS: Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. RESULTS: Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. CONCLUSIONS: The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Similarity index for intuitive assessment of three-dimensional facial asymmetry.

Evaluation of facial asymmetry generally involves landmark-based analyses that cannot intuitively assess differences in three-dimensional (3D) stereoscopic structures between deviation and non-deviation sides. This study tested a newly developed similarity index that uses a mirroring technique to intuitively evaluate 3D mandibular asymmetry, and characterised the resulting lower facial soft tissue asymmetry. The similarity index was used to evaluate asymmetry before and after surgery in 46 adult patients (27 men, 19 women; age, 22 ± 4.8 years) with skeletal Class III malocclusion and facial asymmetry who underwent conventional bimaxillary orthognathic surgery. Relative to the midsagittal plane used as the reference plane, the non-overlapping volume of the mandible significantly decreased, and the similarity index significantly increased after surgery. Similarity indexes of the mandible and lower facial soft tissue were strongly negatively correlated with non-overlapping volumes of each measurement. Differences in bilateral hemi-mandibular and hemi-lower facial soft tissue surface and volume measurements before surgery were significantly negatively correlated with similarity indexes of the mandible before and after surgery. This newly developed similarity index and non-overlapping volume using a mirroring technique can easily and intuitively evaluate overall 3D morphological discrepancies, especially 3D mandibular asymmetry, before and after surgery in skeletal Class III patients with facial asymmetry.

Local injection of RANKL facilitates tooth movement and alveolar bone remodelling.

OBJECTIVES: To investigate the effect of local injection of receptor activator of nuclear factor kappa B ligand (RANKL) on experimental tooth movement and subsequent alveolar bone remodelling in mice. MATERIALS AND METHODS: Sixty mice were randomised to receive daily local RANKL or phosphate-buffered saline injections in the buccal premaxillary bone for 14 of 21 days of incisor movement, followed by a 21-day retention period. Five mice from each group were euthanised on days 0, 3, 7, 14, 21 and 42, and specimens were prepared for haematoxylin and eosin, tartrate-resistant acid phosphatase and immunohistochemical staining. Five mice from each group were subjected to serial microcomputed tomography until day 42 for tooth movement and bone volume quantification. RESULTS: The experimental group showed significantly greater tooth movement and bone volume reduction on days 14 and 21; an increased osteoclast number on days 3, 7, 14 and 21; and no difference on day 42. Higher RANKL expression was observed on days 7 and 14, with remarkable alkaline phosphatase activity. No significant systemic changes were observed. CONCLUSION: Local RANKL injection leads to increased osteoclastic activity and facilitates tooth movement, followed by subsequent alveolar bone formation; this implies a reversible transitional acceleration of bone resorption.

Long-Term Stability of Pre-Orthodontic Orthognathic Bimaxillary Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Surgery.

PURPOSE: The aim of the present study was to compare the long-term stability of bimaxillary surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIALS AND METHODS: The present retrospective study included 31 consecutive patients with skeletal Class III malocclusions who had undergone bimaxillary surgery (Le Fort I osteotomy and bilateral IVRO). Patients were divided into 2 groups based on treatment type: pre-orthodontic orthognathic surgery (POGS; n = 17) and conventional surgery with presurgical orthodontic treatment (CS; n = 14). Lateral cephalograms were obtained before surgery, 1 day after surgery, 1 month after surgery, 1 year after surgery, and 2 years after surgery to evaluate skeletal and soft tissue changes between the 2 groups. Data were analyzed using χ2 tests, Mann-Whitney U tests, repeated-measures analyses of variance, and independent t tests. RESULTS: There was no significant difference in skeletal or soft tissue measurements-with the exception of the angle between the sella-and-nasion plane and the occlusal plane (SN-OP; P < .001)-between the CS and POGS groups at 2 years after IVRO. The SN-OP had increased in the CS group but decreased in the POGS group at 2 years after surgery. CONCLUSIONS: These findings suggest that POGS and CS have similar long-term stability in patients with skeletal Class III malocclusion.

Is There a Difference in Stability After Intraoral Vertical Ramus Osteotomy Between Vertically High-Angle and Normal-Angle Patients?

PURPOSE: Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. MATERIALS AND METHODS: The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. RESULTS: The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. CONCLUSIONS: These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

Major factors contributing to anterior and posterior relapse after intraoral vertical ramus osteotomy.

The aim of this retrospective cohort study was to investigate the factors contributing to mandibular relapse after intraoral vertical ramus osteotomy (IVRO) while controlling for possible confounders. Forty-seven patients who underwent bimaxillary surgery were divided into three groups according to the direction of horizontal mandibular relapse: a stable group (group S), a posterior relapse group (group P), and an anterior relapse group (group A). Lateral cephalograms were analysed 1 month before and at 7 days and 12 months after surgery. One month before surgery, the pogonion in group A was positioned about 13 mm more anteriorly than in group P (P < 0.05). Immediately after surgery, the mandibles in groups A and S had moved about 6 mm more posteriorly than in group P. At 12 months, both the mandibles (point B) and the maxillae (point A) had moved posteriorly in group P (P < 0.05). A multivariate linear regression analysis showed that the amount of setback was the one key factor predicting postoperative mandibular changes 12 months after IVRO. As the amount of setback decreased, mandibular posterior horizontal relapse increased after IVRO. These findings suggest that the amount of setback can be a key factor predicting postoperative mandibular relapse.

Stability of Pre-Orthodontic Orthognathic Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Treatment.

PURPOSE: Postoperative skeletal and dental changes were evaluated in patients with mandibular prognathism who underwent mandibular setback surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusions who underwent IVRO. Patients treated with pre-orthodontic orthognathic surgery (POGS) were compared with patients treated with conventional surgery (CS) with presurgical orthodontics (control) using lateral cephalograms (taken preoperatively, 7 days postoperatively, and 12 months postoperatively). Predictor (group and timing), outcome (cephalometric measurements over time), and other (ie, baseline characteristics) variables were evaluated to determine the differences in postoperative horizontal and vertical positional changes of the mandible, such as point B. Baseline demographics were similar between the groups (N = 37; CS group, n = 17; POGS group, n = 20). The data were analyzed with an independent t test, the Mann-Whitney U test, the Fisher exact t test, Pearson correlation analysis, and simple linear regression analysis. RESULTS: The mean setback of the mandible at point B was similar, but the mandible of the POGS group, particularly the distal segment, moved superiorly during the postoperative period in conjunction with the removal of premature occlusal contacts (P < .001). In the CS group, the mandible had significantly more backward movement 12 months after surgery compared with the POGS group (P < .01). In the POGS group, horizontal and vertical postsurgical changes were linearly correlated with the amount of setback and vertical movement of the mandible. CONCLUSIONS: Mandibular setback surgery using IVRO without presurgical orthodontics leads to considerably different postoperative skeletal and dental changes compared with conventional treatment, with more superior movement being observed at point B during the 1-year postoperative period.

Intraoral Vertical Ramus Osteotomy Results in Good Long-Term Mandibular Stability in Patients With Mandibular Prognathism and Anterior Open Bite.

PURPOSE: Few studies have evaluated the outcomes of intraoral vertical ramus osteotomy (IVRO) for the correction of skeletal Class III malocclusion with an anterior open bite and the potential for postoperative relapse. Therefore, this study evaluated the stability of outcomes of IVRO for mandibular prognathism with and without an anterior open bite. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusion with (AOB group) and without (NAOB group) an anterior open bite who underwent IVRO at Yonsei Dental Hospital (Seoul, Korea). Lateral cephalograms were analyzed for predictor (open bite, yes or no) and outcome (horizontal and vertical relapse in the mandible) variables before and 7 days, 1 year, and 2 years after surgery. Other variables included the patients' demographic characteristics. Data were analyzed using independent t tests, repeated measures analysis of variance, Pearson correlation coefficients, and multiple linear regression analysis. RESULTS: The 2 groups (n = 15 each) were matched for baseline demographic characteristics. During the 2-year postoperative period, anterior and superior mandibular movements were observed in the NAOB group, whereas posterior and superior movements were observed in the AOB group. However, there were no meaningful intergroup differences in horizontal and vertical relapses of the mandible at all time points, although the amount of postoperative inferior relapse increased with a decrease in the amount of initial overbite. CONCLUSIONS: IVRO for the correction of skeletal Class III malocclusion resulted in good postoperative stability over time, regardless of the presence of a preoperative open bite, although the amount of postoperative inferior relapse showed a weak negative correlation with the initial overbite. Thus, IVRO can be a clinically acceptable treatment for skeletal Class III malocclusion with an anterior open bite.

Effect of Audiovisual Treatment Information on Relieving Anxiety in Patients Undergoing Impacted Mandibular Third Molar Removal.

PURPOSE: The authors hypothesized that an audiovisual slide presentation that provided treatment information regarding the removal of an impacted mandibular third molar could improve patient knowledge of postoperative complications and decrease anxiety in young adults before and after surgery. A group that received an audiovisual description was compared with a group that received the conventional written description of the procedure. MATERIALS AND METHODS: This randomized clinical trial included young adult patients who required surgical removal of an impacted mandibular third molar and fulfilled the predetermined criteria. The predictor variable was the presentation of an audiovisual slideshow. The audiovisual informed group provided informed consent after viewing an audiovisual slideshow. The control group provided informed consent after reading a written description of the procedure. The outcome variables were the State-Trait Anxiety Inventory, the Dental Anxiety Scale, a self-reported anxiety questionnaire, completed immediately before and 1 week after surgery, and a postoperative questionnaire about the level of understanding of potential postoperative complications. The data were analyzed with χ(2) tests, independent t tests, Mann-Whitney U  tests, and Spearman rank correlation coefficients. RESULTS: Fifty-one patients fulfilled the inclusion criteria. The audiovisual informed group was comprised of 20 men and 5 women; the written informed group was comprised of 21 men and 5 women. The audiovisual informed group remembered significantly more information than the control group about a potential allergic reaction to local anesthesia or medication and potential trismus (P < .05). The audiovisual informed group had lower self-reported anxiety scores than the control group 1 week after surgery (P < .05). CONCLUSION: These results suggested that informing patients of the treatment with an audiovisual slide presentation could improve patient knowledge about postoperative complications and aid in alleviating anxiety after the surgical removal of an impacted mandibular third molar.

Interdisciplinary treatment for an adult patient with anterior open bite, severe periodontitis, and intellectual disability.

This case report describes the beneficial effects of the interdisciplinary treatment of an adult patient with severe skeletal periodontal problems. A 30-year-old female patient presented with anterior open bite, gummy smile, and facial asymmetry. The patient had chronic generalized severe periodontitis with pathologic maxillary anterior teeth migration and mild intellectual disability. Treatment included 6 months of periodontal treatment, followed by presurgical orthodontic treatment, a Le Fort I osteotomy with anterior segmental osteotomy, a bilateral sagittal split ramus osteotomy, and postsurgical orthodontic treatment. After treatment completion, the patient exhibited functional and aesthetic improvements. Her periodontal condition improved and was maintained after the treatment. Here, we demonstrate a successful treatment outcome in a complicated case following a systematic interdisciplinary approach performed with the correct diagnosis and treatment planning.

Severe skeletal Class III malocclusion treated with 2-stage orthognathic surgery with a mandibular step osteotomy.

To reduce a large amount of mandibular setback and to prevent pharyngeal airway space narrowing when correcting a severe anteroposterior skeletal discrepancy, a mandibular step osteotomy is often combined with 2-stage orthognathic surgery. This case report describes a successful 2-stage orthognathic treatment combined with a mandibular step osteotomy. A 20-year-old man had severe mandibular protrusion, facial asymmetry, and macroglossia. Phase 1 surgery included the mandibular step osteotomy and a partial glossectomy; then we performed phase 2 surgery with a 2-piece LeFort I segmental osteotomy and a bilateral intraoral vertical ramus osteotomy to correct the patient's mandibular protrusion and facial asymmetry. The total treatment period was 30 months, and the final result was improvement of the patient's facial appearance.

A simple classification of facial asymmetry by TML system.

This study proposes a system for classifying facial asymmetry with accompanying mandibular prognathism to facilitate choice of surgical method. We examined hard and soft tissue measurements obtained from posterior-anterior cephalometric radiographs and clinical facial photographs of 153 patients (86 male, 67 female), classifying them according to menton deviation with transverse asymmetry (T), maxillary cant (M), and lip cant (L). The T-group is subclassified according to direction of transverse asymmetry (H). Statistical analysis of menton deviation, cant and transverse asymmetry was performed for each group. The various relationships observed among the groups indicate that most cases (85%) were not effectively correctable using conventional surgical methods. As such, the authors believe that analysing facial asymmetry in terms of the classification system presented in this study and employing surgical methods appropriate to each case will help achieve more harmonious aesthetic outcomes.

Adult patient with hemifacial microsomia treated with combined orthodontics and distraction osteogenesis.

Distraction osteogenesis is an alternative treatment option for patients with facial asymmetry and mandibular hypoplasia. New bone is formed between bone segment surfaces that are gradually separated by incremental traction. The purpose of this article is to report the treatment of a 22-year-old man with hemifacial microsomia, facial asymmetry, and a skeletal Class II profile. The patient's left mandibular ramus was lengthened with distraction osteogenesis, and miniscrew-assisted rapid palatal expansion was used to correct the maxillary transverse deficiency. Postoperative orthodontic treatment achieved tooth alignment and closure of the posterior open bite. The total treatment period was 27 months. These therapeutic treatments improved the patient's facial appearance.

Orthognathic treatment with autotransplantation of a third molar.

Autotransplantation is an option for tooth replacement when a suitable tooth is available and anatomic circumstances are favorable. This case report describes successful orthognathic treatment that was combined with autotransplantation of a maxillary third molar. A 20-year-old woman had mandibular protrusion and facial asymmetry. Five years previously, her mandibular right first molar had been extracted because of dental caries. After preoperative orthodontic treatment, we performed a LeFort I procedure and a bilateral intraoral vertical ramus osteotomy to correct the patient's mandibular protrusion and facial asymmetry. During the postoperative orthodontic treatment, the maxillary left third molar was autotransplanted into the mandibular right first molar site. The total treatment period was 24 months. As a result of these therapeutic treatments, the patient's facial appearance was improved, and an implant was unnecessary. The autotransplanted tooth effectively supported the adjacent teeth and maintained her chewing ability.

Accuracy of miniscrew surgical guides assessed from cone-beam computed tomography and digital models.

INTRODUCTION: Several methods are available to enhance the precision of miniscrew placement. The use of surgical guides based on cone-beam computed tomography is indicated especially in patients with risky or difficult anatomic situations. The purpose of this study was to evaluate the accuracy of miniscrew placement by using surgical guides developed with computer-aided design and manufacturing techniques. METHODS: Miniscrews were placed in cadaver maxillae using stereolithographic computer-aided design and manufacturing techniques with assistance from surgical guides (surgical guide group, n = 25) or periapical x-rays (control group, n = 20). Insertion sites were selected using a 3-dimensional surgical planning program by fusing maxillary digital model images and cone-beam computed tomography images. Deviations between actual and planned placements were measured as 3-dimensional angular deviations and distance (coronal and apical) deviations. RESULTS: In the surgical guide group, the angular deviation was a median of 3.14° (range, 1.02°-10.9°), and the mesiodistal deviations in the coronal and apical areas were medians of 0.29 mm (range, 0.03-0.73 mm) and 0.21 mm (range, 0.03-0.97 mm), respectively. The deviations differed significantly between operators in the control group, but not in the surgical guide group. In the surgical guide group, there was no root damage from miniscrew placement, and 84% of the miniscrews were placed without contacting adjacent anatomic structures. In the control group, 50% of the miniscrews were placed between the roots (P <0.05). CONCLUSIONS: Surgical guide accuracy was improved when digital model imaging was used. Miniscrews were placed more accurately when using surgical guides than when using a direct method.

Surgical-orthodontic treatment for skeletal class II malocclusion with vertical maxillary excess, anterior open bite, and transverse maxillary deficiency.

Nongrowing adult patients with skeletal open bite have been considered among the most difficult to treat. This case report describes the surgical-orthodontic treatment of a blind 20-year-old woman who presented with skeletal class II malocclusion with vertical maxillary excess, anterior open bite, and transverse maxillary deficiency.After the transverse maxillary deficiency was corrected with miniscrew-assisted rapid palatal expansion, Le Fort I osteotomy with anterior segmental osteotomy and bilateral sagittal split ramus osteotomy with advancement genioplasty were used to correct the vertical maxillary excess and the anterior open bite. The patient's facial appearance was markedly improved, and she achieved a functional and stable occlusion after these treatments.This case report demonstrates the efficiency of miniscrew-assisted rapid palatal expansion for a patient with transverse maxillary deficiency and the benefit of a team approach using effective orthodontic mechanics in orthognathic surgery to correct a severe dentofacial deformity.

Maxillary anterior segmental distraction osteogenesis with 2 different types of distractors.

OBJECTIVE: Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. To investigate a potentially more effective maxillary anterior segmental DO, a newly designed intraoral alveolar distractor was applied. The objectives of this study were to investigate the skeletal and dental effects of maxillary anterior segmental DO and the relapse pattern. METHODS: The study was carried out for 8 patients with unilateral cleft lip and palate (mean age, 16 years 7 months). Four patients were treated with an intraoral appliance (IA), and the remaining with a rigid external distractor (RED). Dental and skeletal measurements were obtained for both groups. These measurements were compared for different time points including pre-DO (T1), post-DO (T2), postconsolidation (T3), and 1-year follow-up (T4). RESULTS: Horizontal change of A point was significantly larger after distraction period (T2) in the RED group (mean, 11.0 mm; median, 10.1 mm) than in the IA group (mean, 6.6 mm; median, 7.4 mm) (P < 0.05). Relapse of A point was observed in both RED (mean, -2.3 mm; median, -2.3 mm) and IA groups (mean, -2.6 mm; median, -1.5 mm) at T4. The vertical position of the anterior nasal spine was found to have moved downward in the RED group (mean, 5.5 mm; median, 4.9 mm) but upward in the IA group (mean, -2.5 mm; median, -2.7 mm) after distraction, showing a significant difference between groups (P < 0.05). Axis of upper incisor increased at T2 in the IA group (mean, 10.4 degrees; median, 11.3 degrees), but decreased in the RED group (mean, -10.2 degrees; median, -9.0 degrees) (P < 0.05). It recovered in the RED group at T4. CONCLUSIONS: Maxillary anterior segmental DO is effective for the treatment of patients with cleft lip and palate. The alveolar space is regained, and the facial profile is improved without velopharyngeal problems. Superior results are obtained using the RED appliance for maxillary anterior segmental DO relative to the use of the intraoral distractor appliance.