Design, Characterization and Biopharmaceutical Applications of Novel Green Boron-Carbon Quantum Dots for Quantification of Apalutamide; Greenness Evaluations.

The diagnosis of prostate cancer has been evolving in the current decade, with expected mortality rates of 499,000 death by the year 2030. Apalutamide (APL) has been approved in 2018 as the first drug for the controlling of prostate cancer. APL significant success warrantied its high global sales, which are expected to surpass 58% of segment market sales (together with another drug; enzalutamide). Therefore, new, fast and environmentally friendly analytical methods are required for its determination for the quality control and biological monitoring purposes. The proposed research designs and evaluates the first fluorimetric approach based on novel porous green boron-doped carbon quantum dots (B@CDs) for the determination of APL in biopharmaceutical matrices. The synthetic approach has high quantum yield (31.15%). B@CDs were characterized using several tools, including transmission electron microscopy (TEM), dynamic light scattering (DLS), FTIR and Energy dispersive X-ray spectroscopy (EDX) which proved their improved surface properties with an average nano-diameter of 3.0 nm. The interaction between B@CDs and APL led to enhancement their fluorescence at 441 nm (excitation at 372 nm). The approach was validated for the determination of APL within concentration range of 15.0-700.0 ng mL- 1 with quantification limit LOQ 4.37 ng mL- 1 and detection limit LOD 1.44 ng mL- 1. The approach was successfully applied for the determination of APL in human plasma and pharmaceutical monitoring of its marketed tablet form. Then, the approach was assessed for its environmental impact using different metrics and proved its ecological greenness.

A new green fluorimetric micelle complexation approach for reduction of the consumed solvent and quantification of avapritinib in biological fluids.

Avapritinib (AVA) is the first medication authorized by the US-FDA in 2020 for the management of gastrointestinal stromal tumours (GISTs) that can't be treated by surgery. Cancer is among the most common causes of death worldwide and is the second most common cause of death after cardiovascular disease. Therefore, a quick, easy, sensitive, and straightforward fluorimetric approach was used to analyse AVA in pharmaceutical materials and blood plasma (pharmacokinetic). The suggested technique relies on 2% sodium dodecyl sulphate (SDS, pH 4) micellar system augmentation of the fluorescence of the tested drug. The technique demonstrated high relative fluorescence intensity (RFI) at 430 nm after excitation at 340 nm. Concentrations ranging from 20.0-400.0 ng mL-1 with a limit of quantitation of 9.47 ng mL-1 were used to obtain luminescence data for the studied medicine. In addition, the quantum yield of the AVA fluorescence was increased with the gradual addition of a surfactant at a concentration above its critical micellar level. This knowledge has been exploited to enhance the effectiveness of a spectrofluorometric technique for the estimation of AVA in human plasma (98.95 ± 1.22%) and uniformity tests with greenness assessments. The conditions for enhanced fluorescence were optimized and fully validated using US-FDA and International Conference on Harmonization (ICH) rules. This innovative strategy was expanded for AVA stability research in human plasma across various circumstances. This approach is an eco-friendly solution compared to traditional testing methods that use hazardous chemicals.

Tracking the Variations in Trace and Heavy Elements in Smoking Products Marketed in Oman and Egypt: Risk Assessment After Implementation of Constraining Protocols.

Tobacco smoking is becoming one of the major worldwide concerns regarding environmental pollution as well as health threats. In 2005, the World Health Organization (WHO) released the Framework Convention On Tobacco Control (FCTC), which outlined protocols for controlling tobacco products. Oman was one of the leading countries to follow these protocols; however, Egypt has only followed these protocols recently in 2020. One of the main challenges in tobacco product control is the variation in their trace element's types and amounts from country to country owing to differences in agriculture techniques and used chemical additives. Smoking releases different toxic metal ions found in them into the air, and hence, analyzing trace amounts of metals in tobacco smoking products is becoming more critical. The proposed research aims to evaluate the current levels of 11 heavy metals (namely, As, Pb, Cd, Co, Cr, Be, Ba, Mn, Ni, Fe, and Hg) in 22 tobacco products available in Egypt and Oman using inductively coupled plasma optical emission spectroscopy and a direct mercury analyzer. Although some elements such as Be, Co, and Cd were absent, the positive detection of As and Pb and the levels of Ba, Cr, and Ni are still alarming, especially for heavy smokers. The obtained results were then statistically related to previously published data in 2017 to explore the effectiveness of implementing the FCTC protocols within the Egyptian market. The outcomes suggested a positive impact of FCTC protocol implementation in Egypt, besides the lower levels of elemental content for Omani products compared to the Egyptian market.

Development of cysteine-doped MnO2 quantum dots for spectrofluorimetric estimation of copper: applications in different matrices.

Copper (Cu) plays a role in maintaining healthy nerve cells and the immune system. Osteoporosis is a high-risk factor for Cu deficiency. In the proposed research, unique green, fluorescent cysteine-doped MnO2 quantum dots (Cys@MnO2 QDs) were synthesized and assessed for the determination of Cu in different food and hair samples. The developed quantum dots were synthesized with the help of cysteine using a straightforward ultrasonic approach to create 3D fluorescent Cys@MnO2 QDs. The resulting QDs' morphological and optical characteristics were carefully characterized. By adding Cu ions, the intensity of fluorescence for the produced Cys@MnO2 QDs was found to be dramatically reduced. Additionally, the applicability of Cys@MnO2 QDs as a new luminous nanoprobe was found to be strengthened by the quenching effect grounded on the Cu-S bonding. The concentrations of Cu2+ ions were estimated within the range of 0.06 to 7.00 µg mL-1, with limit of quantitation equal to 33.33 ng mL-1 and detection limit equal to 10.97 ng mL-1. The Cys@MnO2 QD technique was applied successfully for the quantification of Cu in a variety of foods, including chicken meat, turkey, and tinned fish, as well as in human hair samples. The chance that this novel technique could be a useful tool for figuring out the amount of cysteine in bio-samples is increased by the sensing system's remarkable advantages, which include being rapid, simple, and economical.

Dinebra retroflexa Herbal Phytotherapy: A Simulation Study Based on Bleomycin-Induced Pulmonary Fibrosis Retraction Potential in Swiss Albino Rats.

Background and Objectives: Fibrotic lung disease is one of the main complications of many medical conditions. Therefore, the use of anti-fibrotic agents may provide a chance to prevent, or at least modify, such complication. The aim of this study was to evaluate the protective pulmonary anti-fibrotic and anti-inflammatory effects of Dinebra retroflexa. Materials and methods: Dinebra retroflexa methanolic extract and its synthesized silver nanoparticles were tested on bleomycin-induced pulmonary fibrosis. Pulmonary fibrosis was induced by intratracheal instillation of bleomycin (5 mg/5 mL/kg-Saline) as a supposed model for induced lung fibrosis. The weed evaluation was performed by intratracheal instillation of Dinebra retroflexa methanolic extract and its silver nanoparticles (35 mg/100 mL/kg-DMSO, single dose). Results: The results showed that both Dinebra retroflexa methanolic extract and its silver nanoparticles had a significant pulmonary fibrosis retraction potential, with Ashcroft scores of three and one, respectively, and degrees of collagen deposition reduction of 33.8 and 46.1%, respectively. High-resolution UHPLC/Q-TOF-MS/MS metabolic profiling and colorimetrically polyphenolic quantification were performed for further confirmation and explanation of the represented effects. Such activity was believed to be due to the tentative identification of twenty-seven flavonoids and one phenolic acid along with a phenolic content of 57.8 mg/gm (gallic acid equivalent) and flavonoid content of 22.5 mg/gm (quercetin equivalent). Conclusion: Dinebra retroflexa may be considered as a promising anti-fibrotic agent for people at high risk of complicated lung fibrosis. The results proved that further clinical trials would be recommended to confirm the proposed findings.

Cost-effective, green HPLC determination of losartan, valsartan and their nitrosodiethylamine impurity: application to pharmaceutical dosage forms.

Angiotensin-converting enzyme inhibitors are one of the most widely used anti-hypertensive drugs which are used to reduce hypertension. In 2018, the United States Food and Drug Administration together with the European Medicine Agency declared the presence of carcinogenic nitrosamine impurities such as nitrosodiethylamine (NDEA) in some of the products, including valsartan (VLS) and losartan (LOS), and drugs' recall procedures were started. Thus, they should be controlled to be below the acceptable cancer risk level to ensure safety of the pharmaceutical products. Therefore, sensitive and reliable analytical methods were required for detection and quantitation of NDEA in bulk and finished drug products. Green analytical chemistry has received great interest to minimize the amount of organic solvents consumed without loss in chromatographic performance. A green and sensitive HPLC method was developed for the determination of NDEA in LOS and VLS using mobile phase of 0.02 M ammonium acetate adjusted to pH 7.2 and ethanol in gradient manner. Limits of detection and limits of quantification for NDEA were estimated to be 0.2 and 0.5 µg ml-1, respectively. The standardized limits of NDEA impurity in drug substances were set as 0.56 ppm, which indicates the feasibility of its determination by the proposed conventional method without need for expensive instrumentations (e.g. MS/MS detectors) that are not found in most pharmaceutical quality control laboratories.

Analytical Performance and Greenness Evaluation of Five Multi-Level Design Models Utilized for Impurity Profiling of Favipiravir, a Promising COVID-19 Antiviral Drug.

In 2018, the discovery of carcinogenic nitrosamine process related impurities (PRIs) in a group of widely used drugs led to the recall and complete withdrawal of several medications that were consumed for a long time, unaware of the presence of these genotoxic PRIs. Since then, PRIs that arise during the manufacturing process of the active pharmaceutical ingredients (APIs), together with their degradation impurities, have gained the attention of analytical chemistry researchers. In 2020, favipiravir (FVR) was found to have an effective antiviral activity against the SARS-COVID-19 virus. Therefore, it was included in the COVID-19 treatment protocols and was consequently globally manufactured at large-scales during the pandemic. There is information indigence about FVR impurity profiling, and until now, no method has been reported for the simultaneous determination of FVR together with its PRIs. In this study, five advanced multi-level design models were developed and validated for the simultaneous determination of FVR and two PRIs, namely; (6-chloro-3-hydroxypyrazine-2-carboxamide) and (3,6-dichloro-pyrazine-2-carbonitrile). The five developed models were classical least square (CLS), principal component regression (PCR), partial least squares (PLS), genetic algorithm-partial least squares (GA-PLS), and artificial neural networks (ANN). Five concentration levels of each compound, chosen according to the linearity range of the target analytes, were used to construct a five-level, three-factor chemometric design, giving rise to twenty-five mixtures. The models resolved the strong spectral overlap in the UV-spectra of the FVR and its PRIs. The PCR and PLS models exhibited the best performances, while PLS proved the highest sensitivity relative to the other models.

Green and sensitive spectrofluorimetric determination of Remdesivir, an FDA approved SARS-CoV-2 candidate antiviral; application in pharmaceutical dosage forms and spiked human plasma.

Fluorescence spectroscopy has gained much attention over the last few years. Its advantages cover both analytical performance as well as ecological greenness. The quality control of pharmaceuticals requires sensitive, fast and economic methodologies to provide a high throughput at desirable costs. The low energy and decreased solvent consumption make this technique green as well as economic, and hence it is much preferred by pharmaceutical industries. Remdesivir is a recent antiviral, previously used for the treatment of Ebola virus infections, which was approved by the US-FDA in 2020 for treatment of infections caused by SARS-CoV-2 virus. Formulation and wide-scale production of this drug started recently and hence methodologies related to its quality control are highly required. A smart spectrofluorimetric method was validated as per the US-FDA guidelines for the facile estimation of Remdesivir. The assay of Remdesivir was based on its native fluorescence measurements at pH 4 and wavelengths of 244/405 nm. Calibration was achieved over the range of 1.0-65.0 ng mL-1. Different variables affecting the proposed methodology were studied to achieve maximum sensitivity, at limits of detection and quantification of 0.287 and 0.871 ng mL-1, respectively. The developed method is regarded as the first spectrofluorimetric one for the estimation of Remdesivir. The developed method was also utilized for the determination of the drug in its formulated IV infusion and in spiked human plasma. Statistical analysis verified that this method is accurate and reproducible. Moreover, the ecological impact of the developed procedures was evaluated on two recently reported assessment metrics, the Green Analytical Procedure Index (GAPI) and AGREE-analytical greenness metric, to emphasize the greenness of the procedure.

Solvent-free mixed micellar mobile phases: An advanced green chemistry approach for reversed-phase HPLC determination of some antihypertensive drugs.

Minimizing the amount of organic solvents without loss in chromatographic performance has been an important step toward greening analytical methodologies. Mobile-phase composition is the key for maintaining separation efficiency in liquid chromatography while decreasing the procedure hazardousness. If sodium dodecyl sulfate is mixed with Brij-35 in the mobile phase, they could be used as a green alternative for using organic modifiers. In this research, the effect of changing the relative amounts of both surfactants was studied on the chromatographic performance and separation efficiency of ten antihypertensive drugs belonging to different categories. The use of surfactants has many advantages including low cost and toxicity, safe environmental disposal, unique selectivity besides high solubilization capabilities. The optimum separation was maintained using a mobile phase (0.01 M Brij-35, 0.08 M sodium dodecyl sulfate and 0.01 M sodium dihydrogen phosphate/pH 5) on reversed-phase C18 core-shell column at flow rate 1.5 mL/min and temperature 30°C. The method was successfully applied for the determination of the drugs in various marketed dosage forms. International Conference of Harmonization guidelines were followed to validate the developed method. Additionally, the method was verified on the Green Analytical Procedure Index in regards to the greenness and found to be an excellent green alternative method.

Chromatographic analysis of some drugs employed in erectile dysfunction therapy: qualitative and quantitative studies using calixarene stationary phase.

In this study, the effect of change in chromatographic process variables on the retention behavior of four drugs employed in erectile dysfunction therapy on a calixarene stationary phase is described. Three of these drugs are known to treat erectile dysfunction, namely, sildenafil citrate, tadalafil, and apomorphine hydrochloride, and one drug that is used as opioid analgesic, tramadol hydrochloride, which is quiet widely misused to treat premature ejaculation. The results indicate the importance of considering the structure and pKa values of drugs to be separated along with mobile phase composition. A new optimized, rapid, and accurate liquid chromatography method is also established for simultaneous determination of sildenafil citrate, tadalafil, and apomorphine hydrochloride in pharmaceutical preparations and bulk powders. The chromatographic separation of the three pharmaceuticals was achieved on a calixarene column in less than 10 min using a binary mobile phase of 35% acetonitrile and 65% 50 mM sodium perchlorate pH2.5 at 1 mL/min flow rate. The method was validated for system efficiency, linearity, accuracy, precision, limits of detection and quantitation, specificity, stability, and robustness. Statistical analysis proved that the method enabled reproducible and selective quantification of all three analytes in bulk drugs and in pharmaceutical preparations.