FLASH Effect Is Not Always Induced by Ultra-high Dose-rate Proton Irradiation Under Hypoxic Conditions.

BACKGROUND/AIM: Pre-clinical studies have shown that irradiation with electrons at an ultra-high dose-rate (FLASH) spares normal tissue while maintaining tumor control. However, most in vitro experiments with protons have been conducted using a non-clinical irradiation system in normoxia alone. This study evaluated the biological response of non-tumor and tumor cells at different oxygen concentrations irradiated with ultra-high dose-rate protons using a clinical system and compared it with the conventional dose rate (CONV). MATERIALS AND METHODS: Non-tumor cells (V79) and tumor cells (U-251 and A549) were irradiated with 230 MeV protons at a dose rate of >50 Gy/s or 0.1 Gy/s under normoxic or hypoxic (<2%) conditions. The surviving fraction was analyzed using a clonogenic cell survival assay. RESULTS: No significant difference in the survival of non-tumor or tumor cells irradiated with FLASH was observed under normoxia or hypoxia compared to the CONV. CONCLUSION: Proton irradiation at a dose rate above 40 Gy/s, the FLASH dose rate, did not induce a sparing effect on either non-tumor or tumor cells under the conditions examined. Further studies are required on the influence of various factors on cell survival after FLASH irradiation.

Hepatocytes differentiate into intestinal epithelial cells through a hybrid epithelial/mesenchymal cell state in culture.

Hepatocytes play important roles in the liver, but in culture, they immediately lose function and dedifferentiate into progenitor-like cells. Although this unique feature is well-known, the dynamics and mechanisms of hepatocyte dedifferentiation and the differentiation potential of dedifferentiated hepatocytes (dediHeps) require further investigation. Here, we employ a culture system specifically established for hepatic progenitor cells to study hepatocyte dedifferentiation. We found that hepatocytes dedifferentiate with a hybrid epithelial/mesenchymal phenotype, which is required for the induction and maintenance of dediHeps, and exhibit Vimentin-dependent propagation, upon inhibition of the Hippo signaling pathway. The dediHeps re-differentiate into mature hepatocytes by forming aggregates, enabling reconstitution of hepatic tissues in vivo. Moreover, dediHeps have an unexpected differentiation potential into intestinal epithelial cells that can form organoids in three-dimensional culture and reconstitute colonic epithelia after transplantation. This remarkable plasticity will be useful in the study and treatment of intestinal metaplasia and related diseases in the liver.

Dose Evaluation in 2-Phase Method for Advanced Esophageal Cancer by Hybrid Irradiation Techniques.

Purpose: In concurrent chemoradiotherapy for advanced esophageal cancer, a 2-phase method consisting of initial irradiation of a wide elective nodal region and boost irradiation of the primary lesion is commonly employed. Although dose escalation to the primary lesion may be required to achieve higher local control rates, the radiation dose to critical organs must not exceed dose constraints. To achieve an optimum balance of dose prescription and dose reduction to surrounding organs, such as the lungs and heart, we compared hybrid dose distributions and investigated the best combination of the following recent irradiation techniques: volumetric modulation arc therapy (VMAT), proton broad-beam irradiation, and intensity-modulated proton beam therapy (IMPT). Materials and Methods: Forty-five patients with advanced esophageal cancer whose primary lesions were located in the middle- or lower-thoracic region were studied. Radiotherapy plans for the initial and boost irradiation in the 2-phase method were calculated using VMAT, proton broad-beam irradiation, and IMPT calculation codes, and the dose-volume histogram indices of the lungs and heart for the accumulated plans were compared. Results: In plans using boost proton irradiation with a prescribed dose of 60 Gy(RBE), all dose-volume histogram indices were significantly below the tolerance limits. Initial and boost irradiation with VMAT resulted in the median dose of V30 Gy(RBE)(heart) of 27.4% and an achievement rate below the tolerance limit of 57.8% (26 cases). In simulations of dose escalation up to 70 Gy(RBE), initial and boost IMPT resulted in the highest achievement rate, satisfying all dose constraints in 95.6% (43 cases). Conclusion: Applying VMAT to both initial and boost irradiation is not recommended because of the increased risk of the cardiac dose exceeding the tolerance limit. IMPT may allow dose escalation of up to 70 Gy(RBE) without radiation risks to the lungs and heart in the treatment of advanced esophageal cancer.

Characterization of Oral Microbiota Following Chemotherapy in Patients With Hematopoietic Malignancies.

Oral microbiota may be associated with serious local or systemic medical conditions resulting from chemotherapy. This study was conducted to evaluate the changes in the oral microbiota following the initiation of chemotherapy in patients with hematopoietic malignancies and to identify the characteristics of the oral microbiota associated with oral mucositis. Oral samples were collected from 57 patients with hematopoietic malignancies at 2 time points: before the start of chemotherapy and 8 to 20 days after the start of chemotherapy, when chemotherapy-induced oral mucositis often occurs, and 16S rRNA metagenomic analyses were performed. Comparative and linear discriminant analysis effect size (LEfSe) analyses were used to determine the characteristic bacterial groups before and after the initiation of chemotherapy and in those who developed oral mucositis. The alpha and beta diversities of oral microbiota before and after the initiation of chemotherapy differed significantly (operational taxonomic unit index, P < .001; Shannon's index, P < .001; unweighted UniFrac distances, P = .001; and weighted UniFrac distances, P = .001). The LEfSe analysis revealed a group of bacteria whose abundance differed significantly before and after the initiation of chemotherapy. In the group of patients who developed oral mucositis, a characteristic group of bacteria was identified before the start of chemotherapy. In conclusion, we characterized the oral microbiota associated with the initiation of chemotherapy in patients with hematopoietic malignancies. In addition, our findings suggest that oral microbiota composition before the start of chemotherapy may be associated with oral mucositis. The results of this study emphasize the importance of oral management focusing on the oral microbiota during chemotherapy in patients with hematologic malignancies.

Application of the Homologous Modeling Technique for Precision Medicine in the Field of Oral and Maxillofacial Surgery.

In the field of oral and maxillofacial surgery, establishment of a new method for predicting morphology is desirable. Therefore, the purpose of the present study was to establish a new method for predicting the original shape of a mandibular defect site using the homologous modeling technique. This study used data from 44 patients who underwent computed tomography in the Department of Oral Surgery at Osaka Medical College. Two types of homologous models were constructed: total mandible (TM) and half mandible (HM). Principal component analysis (PCA) was performed using point cloud data of the homologous model M and homologous model HM, and a multiple regression equation was created using the PC value of TM as the object variable and PC value of HM as the explanatory variable. The predicted PC (M) was created from PC (HM) using a regression formula, back-calculated from point cloud data from PC (M), to create the predicted mandible model. Finally, the original image (TC-M) and estimated mandible were superposed and examined. The mean absolute error between the predicted mandible and actual mandible was 1.04 ± 1.35 mm. We believe that this method will be applicable in actual clinical practice.

Usefulness of ultrasound in diagnosing long head of the biceps tendon malposition in patients with rotator cuff tears.

PURPOSE: This study aimed to determine the role of preoperative shoulder ultrasonography (SUS) in detecting positional abnormalities of the long head of the biceps tendon (LHBT) and predicting subscapularis (SSC) tears in patients with rotator cuff injuries. METHODS: A total of 331 patients (365 shoulders) who had undergone arthroscopic shoulder surgery for the treatment of rotator cuff tears were included in the study. Their preoperative SUS and magnetic resonance imaging (MRI) findings were examined retrospectively to assess the presence of LHBT abnormalities at the bicipital groove. Using arthroscopic findings as the standard of reference, the sensitivity, specificity, and diagnostic accuracy of SUS and MRI were calculated for detection of LHBT malposition. Furthermore, the correlation between SSC rupture and preoperative LHBT condition was evaluated by MRI and SUS. RESULTS: LHBT malposition was preoperatively diagnosed with a sensitivity of 92%, specificity of 90%, and accuracy of 91% with SUS, and a sensitivity of 74%, specificity of 84%, and accuracy of 80% with MRI. Preoperative SUS was significantly superior to MRI in terms of sensitivity, specificity, and accuracy (p < 0.001 each). Further, the preoperative SUS LHBT findings could predict well the presence or absence of intraoperative SSC rupture (odds ratio: 1.73, p < 0.001). CONCLUSION: SUS is a useful diagnostic modality for preoperative detection of LHBT malposition and prediction of SSC tears in patients with rotator cuff tears.

Histological Evaluation of Porous Additive-Manufacturing Titanium Artificial Bone in Rat Calvarial Bone Defects.

Jaw reconstruction using an additive-manufacturing titanium artificial bone (AMTAB) has recently attracted considerable attention. The synthesis of a titanium artificial bone is based on three-dimensional computed tomography images acquired before surgery. A histological evaluation of porous AMTAB (pAMTAB) embedded in rat calvarial bone defects was conducted. This study examined three groups: rats implanted with mixed-acid and heat-treated pAMTAB, rats implanted with untreated pAMTAB, and rats with no implant. In both pAMTAB groups, bone defects were created in rat calvarial bones using a 5-mm trephine bar, followed by pAMTAB implantation. The pAMTAB was fixed to the defect using the fitting force of the surrounding bones. The rats were sacrificed at 4, 8, and 16 weeks after implantation, and the skull was dissected. Undecalcified ground slides were prepared and stained with Villanueva Goldner. Compared with the no implant control group, both pAMTAB groups exhibited new bone formation inside the defect, with greater bone formation in the mixed-acid and heat-treated pAMTAB group than in the untreated pAMTAB group, but the difference was not significant. These data suggest that pAMTAB induces bone formation after implantation in bone defects. Bone formation appears to be enhanced by prior mixed-acid and heat-treated pAMTAB.

Glenoid bone resorption after Bankart repair: finite element analysis of postoperative stress distribution of the glenoid.

BACKGROUND: There are various modifications of the Bankart repair, and postoperative changes to the glenoid morphology after the repair are reported. Among the various procedures performed, a decrease in the lateral glenoid diameter might be related to the surgery that involves removal of the articular cartilage and repair of the labrum-anterior inferior glenohumeral ligament complex on the glenoid surface. This is in contrast to cases without significant bony Bankart lesions that are not on the edge of the glenoid. Thus, this study aimed to compare glenoid rim stress after Bankart repair using 2 methods of finite element analysis: a method of removing the anteroinferior cartilage and repairing the glenohumeral ligament complex on the glenoid and a method of preserving the cartilage and repairing the glenohumeral ligament complex on the glenoid edge. METHODS: Five preoperative computed tomography scans of patients with traumatic anterior instability who underwent arthroscopic Bankart repair were used. Two models simulating different surgical procedures were created as follows: in model G, a 5-mm-thick cartilage on the glenoid rim was removed between 2 and 7 o'clock, and the glenohumeral ligament complex was repaired on the medial edge of the glenoid bone where the cartilage was removed. In model E, the cartilage on the glenoid rim was not removed, and the glenohumeral ligament complex was repaired on the glenoid edge. The load stresses on the anteroinferior area of the glenoid after Bankart repair with models G and E were measured using finite element analysis. RESULTS: The stress on the glenoid at 3-4 o'clock was 3.16 MPa in model G and 6.42 MPa in model E (P = .043). The stress at 4-5 o'clock was 1.68 MPa in model G and 4.53 MPa in model E (P = .043). The stress at 5-6 o'clock was 2.26 MPa in model G and 3.93 MPa in model E (P = .043). CONCLUSION: Significantly lower load stresses were observed at the anteroinferior rim of the glenoid in model G than in model E.

Humeral bone resorption after reverse shoulder arthroplasty using uncemented stem.

BACKGROUND: Humeral stem loosening has gained attention as it has been identified as a cause of revision surgery in reverse shoulder arthroplasty (RSA). In RSA, humeral stem revision is very difficult if there is humeral bone loss because of stress shielding. Some studies of humeral bone resorption after anatomic shoulder arthroplasty have been published, but there are few detailed reports of humeral bone resorption after RSA. This study aimed to investigate the prevalence of humeral bone resorption after RSA procedures and to evaluate the risk factors for bone resorption. METHODS: This study included 48 shoulders that underwent RSA with an uncemented humeral stem from July 2014 to May 2017 and were followed up for more than 1 year. The prevalence of humeral bone resorption and risk factors were investigated. Logistic, multiple logistic, and multivariate logistic regression analyses were performed to evaluate the data. RESULTS: Grade 0 bone resorption, the most advanced grade, occurred in 8 shoulders (16.7%); grade 1, in 0 (0%); grade 2, in 17 (35.4%); grade 3, in 14 (29.2%); and grade 4, in 9 (18.8%). A high occurrence of bone absorption was observed in zones 1, 2, and 7. Grade 4 bone resorption did not occur in zones 3, 5, and 6. Female sex and an onlay-type stem were significant independent risk factors for grade 4 bone resorption. CONCLUSIONS: Bone resorption was frequently observed in the greater tuberosity, lateral diaphysis, and calcar region. Significant risk factors included female sex and an onlay-type stem.

Examination of new parameters for sex determination of mandible using Japanese computer tomography data.

OBJECTIVE: In the field of forensic science, sex discrimination of skeletons is an important identification item for personal identification. The individual sex discrimination method using skeletons includes a determination method using measurement values and a macroscopic form observation method. Both methods have advantage and disadvantage. In this study, we used the homologous model technique and principal component (PC) analysis to determine gender difference from morphology of the mandible. METHODS AND MATERIALS: 45 patients (23 males and 22 females) of CT imaging for tooth extraction from January 2018 to March 2019 at department of oral surgery, Osaka Medical College. The mean age was 43.1 ± 14.6. Patients with less than 14 remaining teeth were excluded because the number of remaining teeth may affect the shape of the mandible. 3D images were constructed, and 20 landmarks plotting on the 3D model surfaces. We generated template models of the mandible consisting of approximately 8434 polygons. The template model automatically fitted into the individually scanned point cloud of the mandible by minimising external and internal energy functions. As described above, the mandibles were constructed for each sample by using the Homologous Body Modeling software (HBM, Digital Human Technology, Inc.) and the mHBM-Rugle (Medic Engineering Corporation). The mandibles were analysed using the PCA. RESULTS: The contribution of the most important PC was found to be 27.2%. 12 PCs explained over 75% of the total variance. That is, it was able to express 75% or more of the mandible expression with 12 PCs. A significant difference between male and female was observed in the first PCs (Wilcoxon test, p < 0.05). Visualising the result of the first PC showed that the mandibular branch of male was larger than that of female, and the mandible angle was overhanging outside. CONCLUSION: This method is a combination of the determination method using the previous measurement values and the determination using macroscopic observation, and is considered to be innovative method.

Identifying Differences Between a Straight Face and a Posed Smile Using the Homologous Modeling Technique and the Principal Component Analysis.

Recently, a homologous modeling method was developed to simulate 3D human body forms, which can visualize principal component analysis (PCA) results and facilitate its detailed comparison with results of previous method. Herein, we aimed to construct a homologous model of the face to identify differences between a straight face and a posed smile. Thirty-eight volunteers (19 males and 19 females, 38 straight faces and 38 posed smiles) with no medical history associated with a posed smile were enrolled. Three-dimensional images were constructed using the Homologous Body Modeling software and the HBM-Rugle; 9 landmarks were identified on the 3D-model surfaces. The template model automatically fitted into an individually scanned point cloud of the face by minimizing external and internal energy functions. Faces were analyzed using PCA; differences between straight faces and posed smiles were analyzed using paired t tests. Contribution of the most important principal component was 23.8%; 8 principal components explained >75% of the total variance. A significant difference between a straight face and a posed smile was observed in the second and the fourth principal components. The second principal component images revealed differences between a straight face and a posed smile and changes around the chin area with regard to length, shape, and anteroposterior position. Such changes were inclusive of individual differences. However, the fourth principal component image only revealed differences between a straight face and a posed smile; observed differences included simultaneous shortening of upper and lower eyelid length, evaluation of the nasal ala ase, swelling of the cheek area, and elevation of the mouth angle. Although these results were clinically apparent, we believe that this article is the first to statistically verify the same.Consequently, the homologous model technique and PCA are useful for evaluation of the facial soft-tissue changes.

Silicate-substituted strontium apatite nano coating improves osteogenesis around artificial ligament.

BACKGROUND: Treatment of anterior cruciate ligament injuries commonly involves the use of polyethylene terephthalate (PET) artificial ligaments for reconstruction. However, the currently available methods require long fixation periods, thereby necessitating the development of alternative methods to accelerate the healing process between tendons and bones. Thus, we developed and evaluated a novel technique that utilizes silicate-substituted strontium (SrSiP). METHODS: PET films, nano-coated with SrSiP, were prepared. Bone marrow mesenchymal cells (BMSCs) from femurs of male rats were cultured and seeded at a density of 1.0 × 104/cm2 onto the SrSiP-coated and non-coated PET film, and subsequently placed in an osteogenic medium. The osteocalcin concentration secreted into the medium was compared in each case. Next, PET artificial ligament, nano-coated with SrSiP, were prepared. BMSCs were seeded at a density of 4.5 × 105/cm2 onto the SrSiP-coated, and non-coated artificial ligament, and then placed in osteogenic medium. The osteocalcin and calcium concentrations in the culture medium were measured on the 8th, 10th, 12th, and 14th day of culture. Furthermore, mRNA expression of osteocalcin, alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP2), and runt-related transcription factor 2 (Runx2) was evaluated by qPCR. We transplanted the SrSiP-coated and non-coated artificial ligament to the tibiae of mature New Zealand white rabbits. Two months later, we sacrificed them and histologically evaluated them. RESULTS: The secretory osteocalcin concentration in the medium on the film was significantly higher for the SrSiP group than for the non-coated group. Secretory osteocalcin concentration in the medium on the artificial ligament was also significantly higher in the SrSiP group than in the non-coated group on the 14th day. Calcium concentration on the artificial ligament was significantly lower in the SrSiP group than in the non-coated group on the 8th, 10th, 12th, and 14th day. In qPCR as well, OC, ALP, BMP2, and Runx2 mRNA expression were significantly higher in the SrSiP group than in the non-coated group. Newly formed bone was histologically found around the artificial ligament in the SrSiP group. CONCLUSIONS: Our findings demonstrate that artificial ligaments using SrSiP display high osteogenic potential and thus may be efficiently used in future clinical applications.

Reconstruction of the Alveolar Bone Using Bone Augmentation With Selective Laser Melting Titanium Mesh Sheet: A Report of 2 Cases.

Bone augmentation is used to supplement bone defects during dental implant treatment. In this technique, the area filled with bone prosthetic material is covered with an artificial space-making device or titanium mesh sheet, which must be manually adapted to the bone defect during the procedure before being fixed in place. Selective laser melting (SLM) method can be used to preadapt the titanium mesh sheet based on preoperative CT data. This method enables shorter surgery times compared with conventional titanium mesh sheet methods, as well as regeneration of an ideal alveolar bone shape. Here, we present 2 cases of bone augmentation using the SLM titanium mesh sheet method. The postoperative course was without complications in both cases; neither patient experienced mesh exposure or infection during healing. The SLM titanium mesh sheet method should be considered as a new and effective bone augmentation method.

Osteosynthesis Using the Uncalcined and Unsintered Hydroxyapatite / Poly-L-Lactic Acid System.

The poly-L-lactic acid mini-plate system accomplished rapid development. However, the system still has a variety of problems. One such problem is the breakage of screws. In this technical report, we develop the temporary fixing screws made from stainless with hexagon steel that exhibit a hexagonal head and thread part that also features a tapping function.

Late radiological changes after passive scattering proton beam therapy for Stage I lung cancer.

This study aimed to examine late radiological changes after proton beam therapy (PBT) for early-stage non-small cell lung cancer (NSCLC) and to clarify correlations between mass-like radiological changes and patient characteristics. CT scans of patients who underwent passive scattering PBT for T1-2N0M0 NSCLC were analyzed retrospectively. Patients were considered eligible if follow-up CT was performed for at least 2 years, with no definite evidence of local recurrence. The following five periods were defined: (i) 6-12 months, (ii) 12-24 months, (iii) 24-36 months, (iv) 36-48 months and (v) 48-60 months after PBT. Late (≥6 months) radiological changes were scored by consensus of three radiation oncologists according to classifications set forth by Koenig (Radiation injury of the lung after three-dimensional conformal radiation therapy. AJR Am J Roentgenol 2002;178:1383-8.). CT scans of 113 patients (median follow-up, 36 months; range, 24-137 months) were evaluated. Late radiological changes during Periods (i), (ii), (iii), (iv) and (v) included modified conventional pattern (80%, 79%, 72%, 58% and 56%, respectively), mass-like changes (8%, 9%, 14%, 22% and 18%, respectively), scar-like changes (4%, 9%, 11%, 17% and 24%, respectively) and no increased density (8%, 3%, 3%, 2% and 2%, respectively). Mass-like changes were observed in 23 patients (20%). Among patients who developed mass-like changes, the median interval between the initiation of PBT and the onset of mass-like changes was 19 months (range, 6-62 months). In multivariate analysis, a peripheral location was found to be a significant factor (P = 0.035; odds ratio: 4.44; 95% confidence interval: 1.12-21.28). In conclusion, mass-like changes were observed in 20% of patients who underwent PBT. Patients with peripheral tumors showed a higher incidence of mass-like changes.

Clinical Trial of Radiotherapy After Intravenous Injection of Acridine Orange for Patients with Cancer.

AIM: We previously found that low-dose X-ray treatment after systemic administration of acridine orange (AO), which is known to have a low toxicity in animals, inhibited tumor growth in experimental studies using mouse osteosarcoma. In this pilot study, we planned to verify the toxicity of intravenous injection of low-dose AO in humans and investigate the anticancer effect of radiation after systemic AO administration (iAOR) for human cancer. PATIENTS AND METHODS: Eight patients with terminal cancer were treated with iAOR. RESULTS: None of the patients exhibited an adverse effect from AO injection. Three out of the five patients who received a full course of iAOR exhibited clinical or image-based responses, whereas two patients did not. CONCLUSION: The systemic administration of AO was confirmed not to be toxic in humans, and iAOR was suggested to be potentially effective against radioresistant cancer.

Modifying oxygen tension affects bone marrow stromal cell osteogenesis for regenerative medicine.

AIM: To establish a hypoxic environment for promoting osteogenesis in rat marrow stromal cells (MSCs) using osteogenic matrix cell sheets (OMCSs). METHODS: Rat MSCs were cultured in osteogenic media under one of four varying oxygen conditions: Normoxia (21% O2) for 14 d (NN), normoxia for 7 d followed by hypoxia (5% O2) for 7 d (NH), hypoxia for 7 d followed by normoxia for 7 d (HN), or hypoxia for 14 d (HH). Osteogenesis was evaluated by observing changes in cell morphology and calcium deposition, and by measuring osteocalcin secretion (ELISA) and calcium content. In vivo syngeneic transplantation using OMCSs and ß-tricalcium phosphate discs, preconditioned under NN or HN conditions, was also evaluated by histology, calcium content measurements, and real-time quantitative PCR. RESULTS: In the NN and HN groups, differentiated, cuboidal-shaped cells were readily observed, along with calcium deposits. In the HN group, the levels of secreted osteocalcin increased rapidly from day 10 as compared with the other groups, and plateaued at day 12 (P < 0.05). At day 14, the HN group showed the highest amount of calcium deposition. In vivo, the HN group showed histologically prominent new bone formation, increased calcium deposition, and higher collagen type I messenger RNA expression as compared with the NN group. CONCLUSION: The results of this study indicate that modifying oxygen tension is an effective method to enhance the osteogenic ability of MSCs used for OMCSs.

Humeral bone resorption after anatomic shoulder arthroplasty using an uncemented stem.

BACKGROUND: Bone resorption around the femoral stem after total hip arthroplasty is a well-known phenomenon. However, only a few studies have evaluated bone resorption after shoulder arthroplasty. This study investigated the prevalence of humeral bone resorption after different shoulder arthroplasty procedures. METHODS: The study included 147 shoulders that underwent total shoulder arthroplasty (TSA) or humeral head replacement (HHR) with an uncemented humeral stem from November 2008 to May 2015 and were monitored for more than 1 year. The prevalence of humeral bone resorption and risk factors were investigated. RESULTS: The most advanced grade of bone resorption, grade 0, occurred in 21 shoulders (14.3%). Grade 1 bone resorption occurred in 10 (6.8%), grade 2 in 28 (19.0%), grade 3 in 61 (41.5%), and grade 4 in 27 (18.4%). High occurrence of bone absorption was observed in zones 1, 2, and 7. Grade 4 bone resorption did not occur in zones 3 and 5. HHR, on-growth type stem coating, and occupation ratio were significant independent risk factors for grade ≥3 bone resorption, whereas female sex and HHR were significant independent risk factors for grade 4. CONCLUSION: Bone resorption was observed in 126 shoulders (85.7%), and full-thickness cortical bone resorption occurred in 27 shoulders (18.4%). Bone resorption was frequently observed at the greater tuberosity, lateral diaphysis, and calcar region (zones 1, 2, and 7). Significant risk factors included female sex, HHR with rotator cuff reconstruction, on-growth type stem coating, and high occupation ratio of the implant.

The relationship between lateral displacement of the mandible and scoliosis.

OBJECTIVES: Idiopathic scoliosis is an orthopaedic disease of childhood, with onset and progress occurring until adolescence. Here, the relationship between lateral displacement of the mandible and scoliosis was analysed quantitatively. METHODS: Seventy-nine non-syndromic Japanese patients (18 men, 61 women), who were diagnosed with jaw deformities and underwent surgical orthognathic treatment at Kyushu University Hospital from January 2011 to August 2014, were enrolled. Their mean age at the time of radiography was 25.3 ± 8.7 years. Postero-anterior cephalometric radiographs and chest radiographs were examined. In postero-anterior cephalometric radiographs, a horizontal baseline (X-axis) was drawn as a straight line that intersects both the zygomatic bases, and a vertical line (Y-axis) was marked perpendicular to the X-axis, with an intersection at the anterior nasal spine (ANS). Point A was defined as the intersection of the X- and Y-axes, and line A was defined as the line connecting point A to the menton. The angle made by the X-axis and line A (i.e., lateral displacement of the mandible) was measured. We designated an absolute value even if the mandibular menton was located on the right or left side. In chest radiographs, Cobb's method was used to measure scoliosis curves; the direction of the curve was designated similarly. RESULTS: Nine (11.4%) individuals had a Cobb angle >10°. There was a positive correlation between the Cobb angle and the degree of mandibular deviation (p < 0.05). CONCLUSION: Lateral displacement of the mandible and scoliosis are related.

High Le Fort I osteotomy for correction of mid-face deformity in Crouzon syndrome.

An 18-year-old woman with mild Crouzon syndrome was referred with malocclusion and mandibular protrusion. Examination revealed Class III canine and molar relationships, hypoplastic maxilla, 1-mm overbite, and -2-mm overjet. Analysis showed 69° sella-nasion-A, 73.6° sella-nasion-B, and -4.6° A point-nasion-B point angles. Polysomnography revealed respiratory disturbance and 6.3% oxygen desaturation indices of 5.4/h and 9.0/h. We performed double-jaw surgery using high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy for midfacial deformity correction. Twelve months post-surgery, her measures were 70.8°, 72°, -1.2°, 3.0/h, and 6.1/h, respectively. Esthetics were satisfactory. High Le Fort I osteotomy is effective for midfacial deformity correction in patients with Crouzon syndrome.