A tissue-silicone integrated simulator for right ventricular pulsatile circulation with severe functional tricuspid regurgitation.

There is a great demand for development of a functional tricuspid regurgitation (FTR) model for accelerating development and preclinical study of tricuspid interventional repair devices. This study aimed to develop a severe FTR model by creating a tissue-silicone integrated right ventricular pulsatile circulatory simulator. The simulator incorporates the porcine tricuspid annulus, valve leaflets, chordae tendineae, papillary muscles, and right ventricular wall as one continuous piece of tissue, thereby preserving essential anatomical relationships of the tricuspid valve (TV) complex. We dilated the TV annulus with collagenolytic enzymes under applying stepwise dilation, and successfully achieved a severe FTR model with a regurgitant volume of 45 ± 9 mL/beat and a flow jet area of 15.8 ± 2.3 cm2 (n = 6). Compared to a normal model, the severe FTR model exhibited a larger annular circumference (133.1 ± 8.2 mm vs. 115.7 ± 5.5 mm; p = 0.009) and lower coaptation height (6.6 ± 1.0 mm vs. 17.7 ± 1.3 mm; p = 0.003). Following the De-Vega annular augmentation procedure to the severe FTR model, a significant reduction in regurgitant volume and flow jet area were observed. This severe FTR model may open new avenues for the development and evaluation of transcatheter TV devices.

Difference in tissue temperature change between two cryoballoons.

BACKGROUND: Cryoballoon ablation, especially Arctic Front Advance Pro (AFA-Pro) (Medtronic, Minneapolis, Minnesota, USA), has been widely recognised as a standard approach to atrial fibrillation (AF). Recently, Boston Scientific has released a novel cryoballoon system (POLARx). Despite comparable acute clinical outcomes of these two cryoballoons, the recent study reported a higher complication rate, especially for phrenic nerve palsy, with POLARx. However, their impact on biological tissue remains unclear. OBJECTIVE: The purpose of our study is to evaluate temperature change of biological tissue during cryoablation of each cryoballoon using a porcine experimental model. METHOD: A tissue-based pulmonary vein model was constructed from porcine myocardial tissue and placed on a stage designed to simulate pulmonary vein anatomy and venous flow. Controlled cryoablations of AFA-Pro and POLARx were performed in this model to evaluate the tissue temperature. A temperature sensor was set behind the muscle and cryoballoon ablation was performed after confirming the occlusion of pulmonary vein with cryoballoon. RESULTS: The mean tissue nadir temperature during cryoablation with AFA-Pro was -41.5°C±4.9°C, while the mean tissue nadir temperature during cryoablation with POLARx was -58.4°C±5.9°C (p<0.001). The mean balloon nadir temperature during cryoablation with AFA-Pro was -54.6°C±2.6°C and the mean balloon nadir temperature during cryoablation with POLARx was -64.7°C±3.8°C (p<0.001). CONCLUSION: POLARx could freeze the biological tissue more strongly than AFA-Pro.

Repairable ex vivo model of functional and degenerative mitral regurgitation.

OBJECTIVES: Transcatheter mitral valve repair is an emerging alternative to the surgical repair. This technology requires preclinical studies to assess efficacy in mitigating mitral regurgitation (MR). However, ex vivo MR models are not established. We developed 2 novel repairable models, functional and degenerative, which can quantitatively assess regurgitation and effect of intervention. METHODS: We used porcine mitral valves and a pulsatile flow circulation system. In the functional MR model, the annulus was immersed in 0.1% collagenase solution and dilated using 3D-printed dilators. To control the regurgitation grade, the sizes of the dilator and silicone sheet in which the valve was sutured to were adjusted. Chordae of P2 were severed in the degenerative model, and the number of severed chordae was adjusted to control the regurgitation grade. Models were repaired using the edge-to-edge or artificial chordae technique. RESULTS: The mean regurgitant fraction of the moderate-severe functional and degenerative models were 47.9% [standard deviation (SD): 2.2%] and 58.5% (SD: 8.0%), which were significantly reduced to 28.7% (SD: 4.4%) (P < 0.001) and 26.0% (SD: 4.4%) (P < 0.001) after the valve repair procedures. Severe functional model had a mean regurgitant fraction of 59.4% (SD: 6.0%). CONCLUSIONS: Both functional and degenerative models could produce sufficient MR levels that meet the interventional indication criteria. The repairable models are valuable in evaluating the efficacy of valve repair procedures and devices. The ability to control the amount of regurgitation enhances the versatility and reliability of these models. These reproducible models could expedite the development of novel devices.

A survey on the usage of decellularized tissues in orthopaedic clinical trials.

Orthopaedic surgery requires grafts with sufficient mechanical strength. For this purpose, decellularized tissue is an available option that lacks the complications of autologous tissue. However, it is not widely used in orthopaedic surgeries. This study investigated clinical trials of the use of decellularized tissue grafts in orthopaedic surgery. Using the ClinicalTrials.gov (CTG) and the International Clinical Trials Registry Platform (ICTRP) databases, we comprehensively surveyed clinical trials of decellularized tissue use in orthopaedic surgeries registered before 1 September 2022. We evaluated the clinical results, tissue processing methods, and commercial availability of the identified products using academic literature databases and manufacturers' websites. We initially identified 4,402 clinical trials, 27 of which were eligible for inclusion and analysis, including nine shoulder surgery trials, eight knee surgery trials, two ankle surgery trials, two hand surgery trials, and six peripheral nerve graft trials. Nine of the trials were completed. We identified only one product that will be commercially available for use in knee surgery with significant mechanical load resistance. Peracetic acid and gamma irradiation were frequently used for sterilization. Despite the demand for decellularized tissue, few decellularized tissue products are currently commercially available, particularly for the knee joint. To be viable in orthopaedic surgery, decellularized tissue must exhibit biocompatibility and mechanical strength, and these requirements are challenging for the clinical application of decellularized tissue. However, the variety of available decellularized products has recently increased. Therefore, decellularized grafts may become a promising option in orthopaedic surgery.

Comparison of hemodynamics and root configurations between remodeling and reimplantation methods for valve-sparing aortic root replacement: a pulsatile flow study.

PURPOSE: To compare the characteristics of reimplantation (RI) using grafts with sinuses and remodeling (RM) with/without external suture annuloplasty using a pulsatile flow simulator. METHODS: Porcine aortic roots were obtained from an abattoir, and six models of RM and RI with sinuses were prepared. External suture annuloplasty (ESA) was performed in the RM models to decrease the root diameter to 22 mm (RM-AP22) and 18 mm (RM-AP18). Valve models were tested at mean pulsatile flow and aortic pressure of 5.0 L/min and 120/80 (100) mmHg, respectively, at 70 beats/min. The forward flow, regurgitation, leakage, backflow rates, valve-closing time, and mean and peak pressure gradient (p-PG) were evaluated. Root configurations were examined using micro-computed tomography (micro-CT). RESULTS: The backflow rate was larger in the RM models than in the RI models (RI: 8.56% ± 0.38% vs. RM: 12.64% ± 0.79%; p < 0.01). The RM-AP and RI models were comparable in terms of the forward flow, regurgitation, backflow rates, p-PG, and valve-closing time. The analysis using a micro-CT showed a larger dilatation of the sinus of the Valsalva in the RM groups than in the RI group (Valsalva: RI, 26.55 ± 0.40 mm vs. RM-AP22, 31.22 ± 0.55 mm [p < 0.05]; RM-AP18, 31.05 ± 0.85 mm [p < 0.05]). CONCLUSIONS: RM with ESA and RI with neo-sinuses showed comparable hemodynamics. ESA to RM reduced regurgitation.

Systematic analysis of the test design and performance of AI/ML-based medical devices approved for triage/detection/diagnosis in the USA and Japan.

The development of computer-aided detection (CAD) using artificial intelligence (AI) and machine learning (ML) is rapidly evolving. Submission of AI/ML-based CAD devices for regulatory approval requires information about clinical trial design and performance criteria, but the requirements vary between countries. This study compares the requirements for AI/ML-based CAD devices approved by the US Food and Drug Administration (FDA) and the Pharmaceuticals and Medical Devices Agency (PMDA) in Japan. A list of 45 FDA-approved and 12 PMDA-approved AI/ML-based CAD devices was compiled. In the USA, devices classified as computer-aided simple triage were approved based on standalone software testing, whereas devices classified as computer-aided detection/diagnosis were approved based on reader study testing. In Japan, however, there was no clear distinction between evaluation methods according to the category. In the USA, a prospective randomized controlled trial was conducted for AI/ML-based CAD devices used for the detection of colorectal polyps, whereas in Japan, such devices were approved based on standalone software testing. This study indicated that the different viewpoints of AI/ML-based CAD in the two countries influenced the selection of different evaluation methods. This study's findings may be useful for defining a unified global development and approval standard for AI/ML-based CAD.

Gap distribution mapping to visualize regions associated with type 1 endoleak in a fenestrated thoracic stent graft.

OBJECTIVES: Our goal was to analyse the relationships between aortic surface irregularity and a type 1 endoleak (T1EL) after a thoracic endovascular repair using the Najuta fenestrated stent graft. METHODS: The patients who were treated using the Najuta stent graft for an intact aortic arch aneurysm at the Saitama Cardiovascular and Respiratory Center between June 2013 and June 2017 were analysed retrospectively. The primary end point was the occurrence of a T1EL. The gap between a virtual aorta and the patient's aortic wall at the stent graft fixation was calculated over the whole circumference at 1 mm intervals, and gap distribution mapping was performed. The rate of freedom from a T1EL was estimated using the Kaplan-Meier method and compared between the patients with or without a continuously malapposed region of >1 mm from the branches to the aneurysm. RESULTS: Twenty-one patients were analysed. During the mean follow-up period of 21.7 months, 4 patients were confirmed to have T1ELs. Three of the T1Els were detected during the perioperative period and occurred through a fenestration. The remaining patient had a T1EL 2 years postoperatively. The gap distribution mapping confirmed the presence of a continuously malapposed region of >1 mm from the cervical branch to the aneurysm postoperatively in 4 patients with T1ELs. Patients who had a continuously malapposed region of >1 mm showed a statistically lower T1EL rate than those without (p < 0.001). Malapposed regions defined using the gap distribution mapping were consistent with flow channels through T1EL fenestrations detected using the perioperative computed tomography data. CONCLUSIONS: The gap distribution mapping could be useful to predict the occurrence of T1ELs in patients with the Najuta stent graft.

Characteristics of anatomical difficulty for cryoballoon ablation: insights from CT.

BACKGROUND: The limited availability of balloon sizes for cryoballoon leads to anatomical limitations for pulmonary vein (PV) isolation. We conducted a comprehensive systematic analysis on procedural success rate, atrial fibrillation (AF) recurrence rate and complications of cryoballoon ablation in association with the anatomy of the left atrium and PV based on preprocedural CT to gain insights into proper treatments of patients with AF using cryoballoon. METHOD: A systematic search of literature databases, including PubMed, Web of Science and Cochrane Library, from the inception of each database through February 2021 was conducted. Search keywords included 'atrial fibrillation', 'cryoballoon ablation' and 'anatomy'. RESULTS: Overall, 243 articles were identified. After screening, 16 articles comprising 1396 patients were included (3, 5 and 8 for acute success, AF recurrence and complications, respectively). Regarding acute success and AF recurrences, thinner width of the left lateral ridge, higher PV ovality, PV ostium-bifurcation distance, shorter distance from the non-coronary cusp to inferior PVs, shallower angle of right PVs against the atrial septum and larger right superior PV (RSPV) were associated with poor outcomes. Regarding complications, shorter distance between the RSPV ostium and the right phrenic nerve, larger RSPV-left atrium angle, larger RSPV area and smaller right carina width were associated with incidences of phrenic nerve injury. CONCLUSION: This study elucidated several key anatomical features of PVs possibly affecting acute success, AF recurrence and complications in patients with AF using cryoballoon ablation. CT analysis has helped to describe benefits and anatomical limitations for cryoballoon ablation.

Finite element analysis of cutting balloon expansion in a calcified artery model of circular angle 180°: Effects of balloon-to-diameter ratio and number of blades facing calcification on potential calcification fracturing and perforation reduction.

Calcified artery lesions cause stent under-expansion and increase the risk of in-stent restenosis and stent thrombosis. Cutting balloons facilitate the fracturing of calcification prior to stent implantation, although vessel dissection and perforation are potential issues. In clinical practice, calcifications having maximum calcium angles ≤ 180° are rarely fractured during conventional balloon angioplasty. We hypothesize that the lesion/device diameter ratio and the number of blades facing a non-circular calcified lesion may be crucial for fracturing the calcification while avoiding vessel injury. The geometries of the cutting balloons were constructed and their finite-element models were generated by folding and wrapping the balloon model. Numerical simulations were performed for balloons with five different diameters and two types of blade directions in a 180° calcification model. The calcification expansion ability was distinctly higher when two blades faced the calcification than when one blade did. Moreover, when two blades faced the calcification model, larger maximum principal stresses were generated in the calcification even when using undersized balloons with diameters reduced by 0.25 or 0.5 mm from the reference diameter, when compared with the case where one blade faced the calcified model and a balloon of diameter equal to the reference diameter was used. When two blades faced the calcification, smaller stresses were generated in the artery adjacent to the calcification; further, the maximum stress generated in the artery model adjacent to the calcification under the rated pressure of 12 atm when employing undersized balloons was smaller than that when only one blade faced the calcification and when lesion-identical balloon diameters were used under a nominal pressure of 6 atm. Our study suggested that undersized balloons of diameters 0.25 or 0.5 mm less than the reference diameter might be effective in not only expanding the calcified lesion but also reducing the risk of dissection.

The efficacy of sinus plication in aortic valvuloplasty for bicuspid aortic valve: experiments in a pulsatile flow simulation model.

OBJECTIVES: Sinus plication has emerged as a promising tool that can lead to better stability in bicuspid aortic valve (BAV) repair. However, the mechanisms underlying the efficacy of this technique are unclear. We evaluated the hydrodynamic effect of sinus plication using the experimental pulsatile flow simulator and our original BAV model in vitro. METHODS: Based on the computed tomography data of a BAV patient who had undergone aortic valvuloplasty, a BAV model (group C, n = 6) was developed with bovine pericardium and vascular prosthesis (J-graft Shield Neo Valsalva 24 mm). We performed sinus plication (group SP, n = 6) in the BAV model and compared hydrodynamic data with the control model in the pulsatile flow simulator. Non-fused cusp angle, annulus diameter and effective height were measured by ultrasonography. RESULTS: The average flow was significantly increased in group SP compared to group C (4.24 ± 0.14 l/min vs 4.14 ± 0.15 l/min, respectively, P = 0.034). The mean transvalvular pressure gradient and regurgitant fraction were significantly decreased in group SP compared to group C (11.6 ± 4.3 mmHg vs 16.6 ± 5.0 mmHg, respectively, P = 0.009 and 14.1 ± 2.0% vs 17.4 ± 2.1%, respectively, P = 0.001). Ultrasound measurement indicated that non-fused cusp angle was significantly increased in group SP compared to group C (163.8° ± 9.2° vs 153.0° ± 4.6°, respectively, P = 0.012). CONCLUSIONS: Sinus plication in the BAV model significantly increased the commissural angle. It was effective in not only controlling regurgitation but also improving valve opening. These finding should be confirmed by evaluating cusp stress and/or long-term durability in the future studies.

Aortic root geometry following valve-sparing root replacement with reimplantation or remodeling: experimental investigation under static continuous pressure.

The differences in aortic root geometry associated with various valve-sparing root replacement (VSRR) techniques have not fully been understood. We evaluated the root configuration of current VSRR techniques by developing in vitro test apparatus. Six fresh porcine hearts were used for each model. The aortic root remodeling control group involved replacement of the ascending aorta with diameter reduction of sino-tubular junction (STJ) (C1). The aortic valve reimplantation control group involved replacement of the ascending aorta alone (C2). VSRR included remodeling without (RM) or with annuloplasty (RM + A) and reimplantation with a tube (RI) or a handmade neo-Valsalva graft (RI + V). The root geometry of each model in response to closing hydraulic pressures of 80 and 120 mmHg was investigated using echocardiography. Among the VSRR models, RM yielded the largest aorto-ventricular junction (AVJ), which was similar to those in non-VSRR models [mean AVJ diameter (mm) at 80 mmHg; RM = 25.1 ± 1.5, RM + A = 20.9 ± 0.7, RI = 20.7 ± 0.9, RI + V = 20.8 ± 0.4]. RI + V yielded the largest Valsalva size and largest ratio of Valsalva/AVJ, which was similar to the control group [mean Valsalva diameter (mm) at 80 mmHg; RM = 28.4 ± 1.4, RM + A = 25.8 ± 1.3, RI = 23.6 ± 1.0, RI + V = 30.5 ± 0.8, ratio of Valsalva/AVJ at 80 mmHg; RM = 1.14 ± 0.06, RM + A = 1.24 ± 0.06, RI = 1.15 ± 0.06, RI + V = 1.47 ± 0.05]. The STJ diameter at 80 mmHg was numerically smaller with RM + A (22.4 ± 1.2 mm) than with RM (24.8 ± 2.3 mm, p = 0.11). There were no significant differences in AVJ, Valsalva, or STJ distensibility or ellipticity between procedures. Current modifications, including annuloplasty for remodeling or reimplantation in the setting of neo-Valsalva graft, yield near-physiological root geometries.

Effect of QTU prolongation on hyperemic instantaneous wave-free ratio value: a prospective single-center study.

We hypothesized that in patients with QT prolongation, resistance might not decrease in the wave-free period, because QTU prolongation cannot be detected by instantaneous wave-free ratio (iFR) analysis software. We investigated whether corrected QTU (QTUc) prolongation affects the hyperemic iFR value. Forty-two consecutive patients with intermediate stenosis (≥ 50%) in the left anterior descending coronary artery (LAD) were analyzed. Fractional flow reserve (FFR) and hyperemic iFR were simultaneously and continuously recorded with intravenous adenosine triphosphate (ATP) and papaverine infusions. In 17 patients with stenosis in the proximal LAD, coronary flow was measured. Patients were divided into two groups according to the median absolute deviation of the QTUc by ATP administration/QTUc by papaverine administration. FFR, hyperemic iFR, and flow data were compared between each stimulus and group. Moreover, influences of pressure and electrocardiogram parameters on differences in iFR values under ATP and papaverine administration were compared between the following two groups (group 1: the absolute difference of hyperemic iFR values between ATP and papaverine administration is ≤ 0.05; group 2: that is > 0.05). The paired t test and t test were used in analysis. Hyperemic iFR values of patients under the use of papaverine were lower than those of patients under the use of ATP when QTUc was more prolonged by papaverine administration than by ATP administration (ATP 0.74 ± 0.14, papaverine 0.71 ± 0.15, P = 0.025). No significant differences were observed in the FFR value and flow data between the groups. Regarding QTU, QTUc, and QTUc by ATP/QTUc by papaverine, significant differences were observed between group 1 and group 2. Pressure parameters did not induce significant differences. QTUc prolongation induced by papaverine was associated with lower hyperemic iFR values. An iFR-based assessment might lead to inappropriate treatment of patients with QTUc prolongation.

The effect of tendon stem/progenitor cell (TSC) sheet on the early tendon healing in a rat Achilles tendon injury model.

UNLABELLED: Tissue-engineering approaches have a great potential to improve the treatment of tendon injuries that affect millions of people. The present study tested the hypothesis that introduction of a tendon derived stem/progenitor cell (TSC) sheet accelerates tendon healing and tendon regeneration in a rat model. TSC sheets were produced on temperature-responsive culture dishes. Then, they were grafted on unwounded Achilles tendons and at sites of a 3mm of Achilles tendon defect. At 2 and 4weeks after implantation tendons were examined by histology, immunohistochemistry, transmission electron microscopy (TEM) and mechanical testing. The results showed that the implanted TSC sheet remained stably attached on the tendon surface at 4 weeks after implantation. Moreover, in the tendon defect model, tendon defect area where TSC sheet was implanted was well regenerated and had better organized collagen fibers with elongated spindle shaped cells, compared to relatively disorganized collagen fibers and round shaped cells in the control group. TEM observations revealed longitudinally aligned collagen fibers and thick collagen fibrils in the TSC sheet implanted group. Finally, at 4weeks mechanical property of the TSC sheet implanted tendon had better ultimate load than the control. In conclusion, this study demonstrates the feasibility of implanting TSC sheets on tendons in vivo. Introduction of the cell sheets into a tendon defect significantly improved histological properties and collagen content at both 2 and 4 weeks after implantation, indicating that TSC sheets may effectively promote tendon remodeling in the early stages of tendon healing. STATEMENT OF SIGNIFICANCE: Tendon injury is a highly prevalent clinical problem that debilitates millions of people worldwide in both occupational and athletic settings. It also costs billions of healthcare dollars in treatment every year. In this study, we showed the feasibility of using tendon derived stem cell sheet to deliver biologically active tenogenic-constructs and promote tendon regeneration. This work has the potential to impact the orthopaedic surgery and sports medicine fields in the treatment of tendon injury.

Tensile strength of human pericardium treated with glutaraldehyde.

PURPOSE: We have reconstructed aortic valves using autologous pericardium treated with glutaraldehyde since April 2007. However, the strength of the human pericardium has not been confirmed. We compared tensile strength between glutaraldehyde-treated human pericardium and aortic valve leaflets with various degrees of calcification to determine their suitability for use in aortic valve reconstruction. METHODS: We measured the ultimate tensile strength and elasticity of samples of glutaraldehyde-treated pericardia (n = 8), non-calcified (n = 12), calcified (n = 9) and decalcified (n = 21) aortic leaflets collected from 23 patients who underwent aortic valve surgery. Aortic valves were decalcified using a cavitational ultrasonic surgical aspirator. The pericardium was immersed in 0.6% buffered glutaraldehyde for 10 minutes and then rinsed three times for 6 minutes each in normal saline. RESULTS: The ultimate tensile strength of the glutaraldehyde-treated human pericardium, non-calcified, calcified and decalcified leaflets was 10, 2.8, 1.0 and 0.8 MPa, respectively. CONCLUSIONS: The ultimate tensile strength of glutaraldehyde-treated human pericardium was 4 times higher than non-calcified leaflets, indicating its suitability for application to aortic valve reconstruction. Calcified leaflets were slightly stronger than decalcified leaflets. Thus, calcification can be removed without altering the tensile strength of valve materials.

The improved Jellyfish Valve: durability enhancement with sufficient blood compatibility.

The Jellyfish Valve is one of the most promising polymer valves for artificial hearts. The present problems to be solved are 1) how to prevent a membrane fracture and 2) how to eliminate a calcification, because both of these problems were observed in experiments with goats after 312 days and 414 days of pumping. Finite element analysis demonstrated that mechanical tensile strain induced in the membrane at valve closure was clearly consistent with the fracture location as well as calcification area in in vivo experiments. Based on this finding, a new valve seat with an additional concentric ring 14 mm in diameter and 0.5 mm in width was finally developed. The maximum strain was dramatically reduced to 52% by the design improvement. Moreover, accelerated fatigue tests demonstrated that the improved valve was 10 times more durable as compared with the original valve, which was equivalent to an in vivo duration of 8.3 years. In animal experiments, including 31 days and 46 days use in a total artificial heart (TAH), no thrombus was found despite the lack of anticoagulant or antiplatelet therapies. These results indicate that the improved Jellyfish Valve might be one of the most durable polymer valves, able to perform in artificial hearts for a long period of time.