Physiomimetic biocompatibility evaluation of directly printed degradable porous iron implants using various cell types.

Additively manufactured (AM) degradable porous metallic biomaterials offer unique opportunities for satisfying the design requirements of an ideal bone substitute. Among the currently available biodegradable metals, iron has the highest elastic modulus, meaning that it would benefit the most from porous design. Given the successful preclinical applications of such biomaterials for the treatment of cardiovascular diseases, the moderate compatibility of AM porous iron with osteoblast-like cells, reported in earlier studies, has been surprising. This may be because, as opposed to static in vitro conditions, the biodegradation products of iron in vivo are transported away and excreted. To better mimic the in situ situations of biodegradable biomaterials after implantation, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static conditions to the conditions with dynamic in situ-like fluid flow perfusion in a bioreactor. Furthermore, the compatibility of these scaffolds with four different cell types was evaluated to better understand the implications of these implants for the complex process of natural wound healing. These included endothelial cells, L929 fibroblasts, RAW264.7 macrophage-like cells, and osteoblastic MG-63 cells. The biodegradation rate of the scaffolds was significantly increased in the perfusion bioreactor as compared to static immersion. Under either condition, the compatibility with L929 cells was the best. Moreover, the compatibility with all the cell types was much enhanced under physiomimetic dynamic flow conditions as compared to static biodegradation. Our study highlights the importance of physiomimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro. STATEMENT OF SIGNIFICANCE: Additively manufactured (AM) degradable porous metals offer unique opportunities for the treatment of large bony defects. Despite the successful preclinical applications of biodegradable iron in the cardiovascular field, the moderate compatibility of AM porous iron with osteoblast-like cells was reported. To better mimic the in vivo condition, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static condition to dynamic perfusion. Furthermore, the compatibility of these scaffolds with various cell types was evaluated to better simulate the process of natural wound healing. Our study suggests that AM porous iron holds great promise for orthopedic applications, while also highlighting the importance of physio-mimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro.

Additively manufactured functionally graded biodegradable porous iron.

Additively manufactured (AM) functionally graded porous metallic biomaterials offer unique opportunities to satisfy the contradictory design requirements of an ideal bone substitute. However, no functionally graded porous structures have ever been 3D-printed from biodegradable metals, even though biodegradability is crucial both for full tissue regeneration and for the prevention of implant-associated infections in the long term. Here, we present the first ever report on AM functionally graded biodegradable porous metallic biomaterials. We made use of a diamond unit cell for the topological design of four different types of porous structures including two functionally graded structures and two reference uniform structures. Specimens were then fabricated from pure iron powder using selective laser melting (SLM), followed by experimental and computational analyses of their permeability, dynamic biodegradation behavior, mechanical properties, and cytocompatibility. It was found that the topological design with functional gradients controlled the fluid flow, mass transport properties and biodegradation behavior of the AM porous iron specimens, as up to 4-fold variations in permeability and up to 3-fold variations in biodegradation rate were observed for the different experimental groups. After 4 weeks of in vitro biodegradation, the AM porous scaffolds lost 5-16% of their weight. This falls into the desired range of biodegradation rates for bone substitution and confirms our hypothesis that topological design could indeed accelerate the biodegradation of otherwise slowly degrading metals, like iron. Even after 4 weeks of biodegradation, the mechanical properties of the specimens (i.e., E = 0.5-2.1 GPa, σy = 8-48 MPa) remained within the range of the values reported for trabecular bone. Design-dependent cell viability did not differ from gold standard controls for up to 48 h. This study clearly shows the great potential of AM functionally graded porous iron as a bone substituting material. Moreover, we demonstrate that complex topological design permits the control of mechanical properties, degradation behavior of AM porous metallic biomaterials. STATEMENT OF SIGNIFICANCE: No functionally graded porous structures have ever been 3D-printed from biodegradable metals, even though biodegradability is crucial both for full tissue regeneration and for the prevention of implant-associated infections in the long term. Here, we present the first report on 3D-printed functionally graded biodegradable porous metallic biomaterials. Our results suggest that topological design in general, and functional gradients in particular can be used as an important tool for adjusting the biodegradation behavior of AM porous metallic biomaterials. The biodegradation rate and mass transport properties of AM porous iron can be increased while maintaining the bone-mimicking mechanical properties of these biomaterials. The observations reported here underline the importance of proper topological design in the development of AM porous biodegradable metals.

Additively manufactured biodegradable porous iron.

Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most of such biomaterials are, however, based on magnesium and, thus, degrade too fast. Here, we present the first report on topologically ordered porous iron made by Direct Metal Printing (DMP). The topological design was based on a repetitive diamond unit cell. We conducted a comprehensive study on the in vitro biodegradation behavior (up to 28 days), electrochemical performance, time-dependent mechanical properties, and biocompatibility of the scaffolds. The mechanical properties of AM porous iron (E = 1600-1800 MPa) were still within the range of the values reported for trabecular bone after 28 days of biodegradation. Electrochemical tests showed up to ≈12 times higher rates of biodegradation for AM porous iron as compared to that of cold-rolled (CR) iron, while only 3.1% of weight loss was measured after 4 weeks of immersion tests. The biodegradation mechanisms were found to be topology-dependent and different between the periphery and central parts of the scaffolds. While direct contact between MG-63 cells and scaffolds revealed substantial and almost instant cytotoxicity in static cell culture, as compared to Ti-6Al-4V, the cytocompatibility according to ISO 10993 was reasonable in in vitro assays for up to 72 h. This study shows how DMP could be used to increase the surface area and decrease the grain sizes of topologically ordered porous metallic biomaterials made from metals that are usually considered to degrade too slowly (e.g., iron), opening up many new opportunities for the development of biodegradable metallic biomaterials. STATEMENT OF SIGNIFICANCE: Biodegradation in general and proper biodegradation profile in particular are perhaps the most important requirements that additively manufactured (AM) topologically ordered porous metallic biomaterials should offer in order to become the ideal biomaterial for bone regeneration. Currently, most biodegradable metallic biomaterials are based on magnesium, which degrade fast with gas generation. Here, we present the first report on topologically ordered porous iron made by Direct Metal Printing (DMP). We also conducted a comprehensive study on the biodegradation behavior, electrochemical performance, biocompatibility, and the time evolution of the mechanical properties of the implants. We show that these implants possess bone-mimicking mechanical properties, accelerated degradation rate, and reasonable cytocompatibility, opening up many new opportunities for the development of iron-based biodegradable materials.

Additively manufactured biodegradable porous magnesium.

An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly challenging. Here we present topologically ordered porous magnesium (WE43) scaffolds based on the diamond unit cell that were fabricated by selective laser melting (SLM) and satisfy all the requirements. We studied the in vitro biodegradation behavior (up to 4 weeks), mechanical properties and biocompatibility of the developed scaffolds. The mechanical properties of the AM porous WE43 (E = 700-800 MPa) scaffolds were found to fall into the range of the values reported for trabecular bone even after 4 weeks of biodegradation. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), electrochemical tests and µCT revealed a unique biodegradation mechanism that started with uniform corrosion, followed by localized corrosion, particularly in the center of the scaffolds. Biocompatibility tests performed up to 72 h showed level 0 cytotoxicity (according to ISO 10993-5 and -12), except for one time point (i.e., 24 h). Intimate contact between cells (MG-63) and the scaffolds was also observed in SEM images. The study shows for the first time that AM of porous Mg may provide distinct possibilities to adjust biodegradation profile through topological design and open up unprecedented opportunities to develop multifunctional bone substituting materials that mimic bone properties and enable full regeneration of critical-size load-bearing bony defects. STATEMENT OF SIGNIFICANCE: The ideal biomaterials for bone tissue regeneration should be bone-mimicking in terms of mechanical properties, present a fully interconnected porous structure, and exhibit a specific biodegradation behavior to enable full regeneration of bony defects. Recent advances in additive manufacturing have resulted in biomaterials that satisfy the first two requirements but simultaneously satisfying the third requirement has proven challenging so far. Here we present additively manufactured porous magnesium structures that have the potential to satisfy all above-mentioned requirements. Even after 4 weeks of biodegradation, the mechanical properties of the porous structures were found to be within those reported for native bone. Moreover, our comprehensive electrochemical, mechanical, topological, and biological study revealed a unique biodegradation behavior and the limited cytotoxicity of the developed biomaterials.

Full regeneration of segmental bone defects using porous titanium implants loaded with BMP-2 containing fibrin gels.

Regeneration of load-bearing segmental bone defects is a major challenge in trauma and orthopaedic surgery. The ideal bone graft substitute is a biomaterial that provides immediate mechanical stability, while stimulating bone regeneration to completely bridge defects over a short period. Therefore, selective laser melted porous titanium, designed and fine-tuned to tolerate full load-bearing, was filled with a physiologically concentrated fibrin gel loaded with bone morphogenetic protein-2 (BMP-2). This biomaterial was used to graft critical-sized segmental femoral bone defects in rats. As a control, porous titanium implants were either left empty or filled with a fibrin gels without BMP-2. We evaluated bone regeneration, bone quality and mechanical strength of grafted femora using in vivo and ex vivo µCT scanning, histology, and torsion testing. This biomaterial completely regenerated and bridged the critical-sized bone defects within eight weeks. After twelve weeks, femora were anatomically re-shaped and revealed open medullary cavities. More importantly, new bone was formed throughout the entire porous titanium implants and grafted femora regained more than their innate mechanical stability: torsional strength exceeded twice their original strength. In conclusion, combining porous titanium implants with a physiologically concentrated fibrin gels loaded with BMP-2 improved bone regeneration in load-bearing segmental defects. This material combination now awaits its evaluation in larger animal models to show its suitability for grafting load-bearing defects in trauma and orthopaedic surgery.

TGF-ß2 is involved in the preservation of the chondrocyte phenotype under hypoxic conditions.

Culturing chondrocytes under oxygen tension closely resembling their in vivo environment has been shown to have positive effects on matrix synthesis. In redifferentiation of expanded chondrocytes, hypoxia increased collagen type II expression. However, the mechanism by which hypoxia enhances redifferentiation is still unknown. We employed novel bioreactor technology to investigate the role of TGF-ß, a growth factor heavily implicated in matrix production, in chondrocytes under hypoxia. Dedifferentiated chondrocytes in alginate were cultured for 48h under hypoxic (1% pO2) or normoxic (20%) conditions, using specialized bioreactor technology. Hypoxia induced gene expression (GDF1-, PHD3, HAS2, VEGF, COX2), chondrocyte markers (SOX9, COL2, COL1, AGC1 and MMP13), as well as components of the TGF-ß signaling pathway (TGF-ß isoforms, receptors, and downstream effectors) were analyzed by qPCR after 48h. In addition, protein expression of COL2 and TGF-ß2 were evaluated. To further elucidate the involvement of the TGF-ß2, we used siRNA and ALK5 inhibition. Hypoxic culture showed robust upregulation of hypoxic markers as well as upregulation of SOX9 and COL2 expression. Of all TGF-ß isoforms, only TGF-ß2 was upregulated under hypoxia on both gene and protein level. In addition, both type I receptors (ALK1 and ALK5) were upregulated under hypoxia, but type II and III receptors were not. TGF-ß2 downregulation via siRNA abrogated the hypoxia-induced COL2 expression, as did ALK5 inhibition, giving a strong indication that this pathway is involved in chondrocyte redifferentiation under low oxygen tension. Hypoxic culture is a common approach for cartilage tissue engineering, but its underlying mechanisms are still poorly understood. Here, we show that increased TGF-ß2 signaling through ALK5 plays a role in hypoxia-induced redifferentiation of chondrocytes.

Chondrogenically differentiated mesenchymal stromal cell pellets stimulate endochondral bone regeneration in critical-sized bone defects.

Grafting bone defects or atrophic non-unions with mesenchymal stromal cells (MSCs)-based grafts is not yet successful. MSC-based grafts typically use undifferentiated or osteogenically differentiated MSCs and regenerate bone through intramembranous ossification. Endochondral ossification might be more potent but requires chondrogenic differentiation of MSCs. Here, we determined if chondrogenically differentiated MSC (ch-MSC) pellets could induce bone regeneration in an orthotopic environment through endochondral ossification. Undifferentiated MSC pellets (ud-MSC) and ch-MSC pellets were generated from MSCs of human donors cultured on chondrogenic medium for respectively 3 (ud-MSC) and 21 (ch-MSC) days. A 6 mm femoral bone defect was made and stabilised with an internal plate in 27 athymic rats. Defects were left empty for 6 weeks to develop an atrophic non-union before they were grafted with ch-MSC pellets or ud-MSC pellets. Micro-CT scans made 4 and 8 weeks after grafting showed that ch-MSC pellets resulted in significantly more bone than ud-MSC pellets. This regenerated bone could completely bridge the defect, but the amount of bone regeneration was donor-dependent. Histology after 7 and 14 days showed slowly mineralising pellets containing hypertrophic chondrocytes, as well as TRAP-positive and CD34-positive cells around the ch-MSC pellets, indicating osteoclastic resorption and vascularisation typical for endochondral ossification. In conclusion, grafting critical femoral bone defects with chondrogenically differentiated MSC pellets led to rapid and pronounced bone regeneration through endochondral ossification and may therefore be a more successful MSC-based graft to repair large bone defects or atrophic non-unions. But, since bone regeneration was donor-depend, the generation of potent chondrogenically differentiated MSC pellets for each single donor needs to be established first.

FK506 protects against articular cartilage collagenous extra-cellular matrix degradation.

OBJECTIVE: Osteoarthritis (OA) is a non-rheumatologic joint disease characterized by progressive degeneration of the cartilage extra-cellular matrix (ECM), enhanced subchondral bone remodeling, activation of synovial macrophages and osteophyte growth. Inhibition of calcineurin (Cn) activity through tacrolimus (FK506) in in vitro monolayer chondrocytes exerts positive effects on ECM marker expression. This study therefore investigated the effects of FK506 on anabolic and catabolic markers of osteoarthritic chondrocytes in 2D and 3D in vitro cultures, and its therapeutic effects in an in vivo rat model of OA. METHODS: Effects of high and low doses of FK506 on anabolic (QPCR/histochemistry) and catabolic (QPCR) markers were evaluated in vitro on isolated (2D) and ECM-embedded chondrocytes (explants, 3D pellets). Severe cartilage damage was induced unilaterally in rat knees using papain injections in combination with a moderate running protocol. Twenty rats were treated with FK506 orally and compared to twenty untreated controls. Subchondral cortical and trabecular bone changes (longitudinal microCT) and macrophage activation (SPECT/CT) were measured. Articular cartilage was analyzed ex vivo using contrast enhanced microCT and histology. RESULTS: FK506 treatment of osteoarthritic chondrocytes in vitro induced anabolic (mainly collagens) and reduced catabolic ECM marker expression. In line with this, FK506 treatment clearly protected ECM integrity in vivo by markedly decreasing subchondral sclerosis, less development of subchondral pores, depletion of synovial macrophage activation and lower osteophyte growth. CONCLUSION: FK506 protected cartilage matrix integrity in vitro and in vivo. Additionally, FK506 treatment in vivo reduced OA-like responses in different articular joint tissues and thereby makes Cn an interesting target for therapeutic intervention of OA.

Unfocused extracorporeal shock waves induce anabolic effects in rat bone.

BACKGROUND: Extracorporeal shock waves are known to stimulate the differentiation of mesenchymal stem cells toward osteoprogenitors and induce the expression of osteogenic-related growth hormones. The aim of this study was to investigate if and how extracorporeal shock waves affected new bone formation, bone microarchitecture, and the mechanical properties of bone in a healthy rat model, in order to evaluate whether extracorporeal shock wave therapy might be a potential treatment for osteoporosis. METHODS: Thirteen rats received 1000 electrohydraulically generated unfocused extracorporeal shock waves to the right tibia. The contralateral, left tibia was not treated and served as a control. At two, seven, twenty-one, and forty-nine days after administration of the shock waves, in vivo single-photon-emission computed tomography (SPECT) scanning was performed to measure new bone formation on the basis of uptake of technetium-labeled methylene diphosphonate ((99m)Tc-MDP) (n = 6). Prior to and forty-nine days after the extracorporeal shock wave therapy, micro-computed tomography (micro-CT) scans were made to examine the architectural bone changes. In addition, mechanical testing, microcrack, and histological analyses were performed. RESULTS: Extracorporeal shock waves induced a strong increase in (99m)Tc-MDP uptake in the treated tibia compared with the uptake in the untreated, control tibia. Micro-CT analysis showed that extracorporeal shock waves stimulated increases in both trabecular and cortical volume, which resulted in higher bone stiffness compared with that of the control tibiae. Histological analysis showed intramedullary soft-tissue damage and de novo bone with active osteoblasts and osteoid in the bone marrow of the legs treated with extracorporeal shock waves. Microcrack analysis showed no differences between the treated and control legs. CONCLUSIONS: This study shows that a single treatment with extracorporeal shock waves induces anabolic effects in both cancellous and cortical bone, leading to improved biomechanical properties. Furthermore, treatment with extracorporeal shock waves results in transient damage to the bone marrow, which might be related to the anabolic effects. After further examination and optimization, unfocused extracorporeal shock waves might enable local treatment of skeletal sites susceptible to fracture.

Effects of individual control of pH and hypoxia in chondrocyte culture.

Effects of oxygen tension (pO(2)) and pH on gene and protein expression and metabolic activity of human chondrocytes were independently assessed. Chondrocytes were cultured under a range of pH (6.4-7.4) and different pO(2) (5 and 20%) during 5 days in a bioreactor. Effects on gene expression, DNA content, protein expression, and metabolic activity were determined. Linear regression analysis showed that gene expression of type I collagen (COL1), SOX9, and VEGF is significantly lower at acidic pH, while expression of aggrecan, type II collagen, and HIF1A is pH-independent. Higher protein levels of VEGF were found under low pO(2). Acidic pH severely lowered VEGF release into medium, glucose consumption, and lactate production. Extracellular pH proved to more potently influence cell function than oxygen tension, the latter showing down-regulation of COL1 gene expression and up-regulation of VEGF protein under hypoxia. Hypoxic culture inhibits COL1 mRNA expression pH-dependently, while expression of SOX9 is largely hypoxia independent, but pH dependent. Expression of HIF1A and VEGF revealed divergent pH dependencies. Subtle fluctuations in extracellular pH and oxygen tension clearly influence chondrocyte metabolism and marker expression. Sophisticated pH and oxygen control not only allows study of (patho)physiological changes, but also opens new venues in cartilage tissue engineering.

Glucosamine increases hyaluronic acid production in human osteoarthritic synovium explants.

BACKGROUND: Glucosamine (GlcN) used by patients with osteoarthritis was demonstrated to reduce pain, but the working mechanism is still not clear. Viscosupplementation with hyaluronic acid (HA) is also described to reduce pain in osteoarthritis. The synthesis of HA requires GlcN as one of its main building blocks. We therefore hypothesized that addition of GlcN might increase HA production by synovium tissue. METHODS: Human osteoarthritic synovium explants were obtained at total knee surgery and pre-cultured for 1 day. The experimental conditions consisted of a 2 days continuation of the culture with addition of N-Acetyl-glucosamine (GlcN-Ac; 5 mM), glucosamine-hydrochloride (GlcN-HCl; 0.5 and 5 mM), glucose (Gluc; 0.5 and 5 mM). Hereafter HA production was measured in culture medium supernatant using an enzyme-linked binding protein assay. Real time RT-PCR was performed for hyaluronic acid synthase (HAS) 1, 2 and 3 on RNA isolated from the explants. RESULTS: 0.5 mM and 5 mM GlcN-HCl significantly increased HA production compared to control (approximately 2 - 4-fold), whereas GlcN-Ac had no significant effect. Addition of 5 mM Gluc also increased HA production (approximately 2-fold), but 0.5 mM Gluc did not. Gene expression of the HA forming enzymes HAS 1, 2 and 3 was not altered by the addition of GlcN or Gluc. CONCLUSION: Our data suggest that exogenous GlcN can increase HA production by synovium tissue and is more effective at lower concentrations than Gluc. This might indicate that GlcN exerts its potential analgesic properties through stimulation of synovial HA production.

Effect of pretransplant preconditioning by whole body hyperthermia on islet graft survival.

Previous observations in heat-shocked pig islets revealed the ambivalent character of the stress response simultaneously inducing processes of protection and apoptosis. To clarify whether the proapoptotic character of the stress response is reduced in heat-exposed islets still embedded in their native environment, hyperthermia was performed in the present study either as whole body hyperthermia (WBH) prior to pancreas resection or as in vitro heat shock (HS) after isolation. HS (42 degrees C/45 min) was induced in donors 12 h before isolation (WBH, n = 32) or in freshly isolated islets prior to 12 h of culture at 37 degrees C (in vitro HS, n = 25). Islets continuously incubated at 37 degrees C served as controls (n = 34). Proinflammatory treatment was performed with H2O2, DETA-NO, or a combination of IL-1beta, TNF-alpha, and IFN-gamma. Quality assessment included islet yield, viability staining, static glucose incubation, and nude mouse transplantation. WBH was significantly less effective than in vitro HS to induce HSP70 overexpression and to increase islet resistance against inflammatory mediators. Although characterized by an unaltered Bax to Bcl-2 ratio, islets subjected to WBH partially failed to restore sustained normoglycemia in diabetic nude mice. The inflammatory response observed in the pancreas of WBH-treated rats was associated with significantly reduced viability that seems to have a higher predictive value for posttransplant outcome compared to islet in vitro function or mitochondrial activity. In contrast, in vitro HS significantly decreased transcript levels of Bcl-2, but did not affect posttransplant function compared to sham-treated islets. These findings suggest that WBH is primarily associated with increased necrosis as a secondary tissue type-specific effect of pancreas damage while in vitro HS mainly induces apoptosis.

Cytokine-induced osteoprotegerin expression protects pancreatic beta cells through p38 mitogen-activated protein kinase signalling against cell death.

AIMS/HYPOTHESIS: Pro-inflammatory cytokines play a crucial role in immune-mediated beta cell destruction, an essential mechanism in the pathogenesis of type 1 diabetes mellitus. Microarray analysis recently identified osteoprotegerin (OPG; now known as tumour necrosis factor receptor superfamily, member 11b [TNFRSF11B]) as a cytokine-induced gene in beta cells. The aim of the present study was to characterise the functional role and signalling pathways of OPG that are involved in cytokine-induced beta cell death. MATERIALS AND METHODS: As cellular models, the rat beta cell line INS-1E and human primary pancreatic islets were employed. The effects of IL-1beta and TNF-alpha on OPG expression were characterised by northern blot and immunoassay. The effect of OPG on beta cell survival was assessed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Signalling pathways were evaluated by western blot analysis using antibodies against p38 mitogen-activated protein kinases (MAPK), c-Jun N-terminal kinase and extracellular signal-regulated kinase 1/2. RESULTS: The INS-1E cell line and primary pancreatic islets expressed OPG mRNA and secreted OPG protein, both of which were enhanced by IL-1beta and TNF-alpha. Exposure to IL-1beta resulted in sustained phosphorylation of p38 MAPK in INS-1E cells and subsequent cell death. Administration of exogenous OPG prevented both IL-1beta-induced beta cell death and sustained p38 MAPK phosphorylation. CONCLUSIONS/INTERPRETATION: Our data indicate that cytokine-induced production of OPG may protect beta cells from further damage. This protective effect is, at least in part, mediated through inhibition of p38 MAPK phosphorylation. Thus OPG is an autocrine or paracrine survival factor for beta cells.

Biochemical and functional modulation of the cartilage collagen network by IGF1, TGFbeta2 and FGF2.

OBJECTIVE: Examine effects of insulin-like growth factor 1 (IGF1), transforming growth factor beta2 (TGFbeta2) and fibroblast growth factor 2 (FGF2) on proteoglycan and collagen network and biomechanical properties of the newly formed cartilage matrix. METHODS: Bovine articular chondrocytes were cultured in alginate beads for 3 weeks with or without FGF2, TGFbeta2 or IGF1 in the presence of 10% FCS. Proteoglycan content, collagen content, hydroxylysylpyridinoline cross-links and overall matrix metalloproteinase (MMP) activity in the culture medium were measured. Alginate disks cultured for 5 weeks were used to evaluate the effect of growth factors on mechanical properties of the construct by determining the equilibrium aggregate modulus and secant modulus. RESULTS: IGF1 increased collagen and proteoglycan deposition. FGF2 mainly decreased collagen deposition and TGFbeta2 proteoglycan deposition. A decrease in cross-links was observed in matrix produced by chondrocytes cultured in the presence of TGFbeta2. IGF1 and FGF2 had no influence on the number of cross-links per collagen molecule. Overall MMP activity was significantly higher in culture medium of cells cultured with FGF2. TGFbeta2 and IGF1 had no effect on MMP activity. After 35 days of culture, the matrix produced under influence of IGF1 had a lower permeability and a trend to increase stiffness. FGF2 showed a trend to lower both properties. TGFbeta2 had no effect on these parameters. CONCLUSION: IGF1, TGFbeta2 and FGF2 had differential effects on collagen network formation. Of the three growth factors tested, IGF1 seems to be best in promoting the formation of a functional collagen network since it increased proteoglycan and collagen deposition and improved the mechanical properties.

Ghrelin and unacylated ghrelin stimulate human osteoblast growth via mitogen-activated protein kinase (MAPK)/phosphoinositide 3-kinase (PI3K) pathways in the absence of GHS-R1a.

Recent studies demonstrate widespread expression of ghrelin among tissues and have uncovered its pleiotropic nature. We have examined gene expression of ghrelin and its two receptor splice variants, growth hormone secretagogue receptors (GHS-R) 1a and 1b, in human bone biopsies and in the human pre-osteoblastic SV-HFO cell line during differentiation. Additionally, we examined proliferative effects of ghrelin and unacylated ghrelin (UAG) in differentiating and non-differentiating cells. We detected GHS-R1b mRNA in human bone and osteoblasts but not ghrelin's cognate receptor GHS-R1a, using two different real-time PCR assays and both total RNA and mRNA. In osteoblasts GHS-R1b mRNA expression remained low during the first 14 days of culture, but increased 300% in differentiating cells by day 21. Both human bone biopsies and osteoblasts expressed ghrelin mRNA, and osteoblasts were found to secrete ghrelin. Overall, ghrelin gene expression was greater in differentiating than non-differentiating osteoblasts, but was not increased during culture in either group. Ghrelin and UAG induced thymidine uptake dose-dependently, peaking at 1 and 10 nM respectively, at day 6 of culture in both non-differentiating and differentiating osteoblasts. The proliferative response to ghrelin and UAG declined with culture time and state of differentiation. The proliferative effects of ghrelin and UAG were suppressed by inhibitors of extracellular-signal-regulated kinase (ERK) and phosphoinositide-3 kinase, and both peptides rapidly induced ERK phosphorylation. Overall, our data suggest new roles for ghrelin and UAG in modulating human osteoblast proliferation via a novel signal transduction pathway.

Glucosamine decreases expression of anabolic and catabolic genes in human osteoarthritic cartilage explants.

OBJECTIVE: To investigate the effect of glucosamine (GlcN) in a human osteoarthritic explant model on expression of genes involved in anabolic and catabolic activities of chondrocytes. METHODS: Human osteoarthritic explants, obtained during knee arthroplasty surgery, were pre-cultured (3 days) and treated with glucosamine-hydrochloride (GlcN-HCl) or glucosamine-3-sulphate (GlcN-S) at 0.5mM and 5mM (4 days). RNA was isolated from the explants and real time RT-PCR was performed. Additionally, total matrix metalloproteinase (MMP) activity was measured in culture medium. RESULTS: Addition of 5mM GlcN led to significant down-regulation of aggrecan (2.65-7.73-fold) and collagen type II (7.75-22.17-fold) gene expression, indicating inhibited anabolic activity. Considering catabolic activities, 5mM GlcN significantly down-regulated aggrecanase-1 and MMP3 and 5mM GlcN-S additionally down-regulated aggrecanase-2 and tissue inhibitor of MMP gene expression significantly. Gene expression was not significantly altered by 0.5mM GlcN. Total MMP activity in culture medium was only significantly reduced after addition of 5mM GlcN-HCl. CONCLUSION: The effects of GlcN on gene expression in a human osteoarthritic explant model suggest that enzymatic breakdown of the extra-cellular matrix might be reduced by the addition of 5mM GlcN. Additionally, restoration of already damaged cartilage is not to be expected, because gene expression of anabolic genes is also down-regulated. We suggest that chondroprotective properties of GlcN in vivo may be based on inhibiting further degradation due to catabolic activities, rather than on the ability to rebuild cartilage.

The Rap-B-Raf signalling pathway is activated by glucose and glucagon-like peptide-1 in human islet cells.

AIMS/HYPOTHESIS: Glucose and glucagon-like peptide-1 have been shown to activate extracellular signal-regulated kinase (ERK) and phosphoinositide 3-kinase in beta cells. We examined the contributions of the small GTPases Rap and Ras and the serine-threonine kinases B-Raf and Raf-1 to the activation of these kinases in human islet cells. METHODS: The expression of Rap, Ras, B-Raf and Raf-1 in human islets was examined by immunohistochemistry and immunoblotting. Human islets were incubated in glucose at concentrations of 2.5 and 15 mmol/l and were stimulated with 10 nmol/l glucagon-like peptide-1. The activation of ERK and Raf kinases was examined by phosphorylation-specific antibodies and immuno-complexed kinase assays. The activation of Rap and Ras was determined by pull-down assays. Stimulation of phosphoinositide 3-kinase was detected by immuno-complexed lipid kinase assays. RESULTS: Extracellular-regulated kinase and protein kinase B (a downstream target of phosphoinositide 3-kinase) were activated in islets stimulated with glucose and glucagon-like peptide-1. In these islets, the Rap-B-Raf signalling pathway was activated preferentially compared with Ras and Raf-1, and activated Rap and B-Raf mediated ERK stimulation in kinase assays in vitro. In addition, Rap rather than Ras mediated activation of phosphoinositide 3-kinase in islets stimulated with glucose and glucagon-like peptide-1. CONCLUSIONS/INTERPRETATION: In human islet cells, glucose and glucagon-like peptide-1 activate the Rap and B-Raf signalling module, which mediates ERK activation in assays in vitro. Rap also activates phosphoinositide 3-kinase, delineating central roles for Rap and B-Raf as therapeutic targets for beta cell growth in diabetes mellitus.