The Biodegradation of 4-Chlorophenol in a Moving Bed Biofilm Reactor Using Response Surface Methodology: Effect of Biogenic Substrate and Kinetic Evaluation.

4-Chlorophenol (4-CP) is a persistent organic pollutant commonly found in petrochemical effluents. It causes toxic, carcinogenic and mutagenic effects on human beings and aquatic lives. Therefore, an environmentally benign and cost-effective approach is needed against such pollutants. In this direction, the chlorophenol degrading bacterial consortium consisting of Bacillus flexus GS1 IIT (BHU) and Bacillus cereus GS2 IIT (BHU) was isolated from a refinery site. A composite biocarrier namely polypropylene-polyurethane foam (PP-PUF) was developed for bacterial cells immobilization purpose. A lab-scale moving bed biofilm reactor (MBBR) packed with Bacillus sp. immobilized PP-PUF biocarrier was employed to analyse the effect of peptone on biodegradation of 4-CP. The statistical tool, i.e. response surface methodology (RSM), was used to optimize the process variables (4-CP concentration, peptone concentration and hydraulic retention time). The higher values of peptone concentration and hydraulic retention time were found to be favourable for maximum removal of 4-CP. At the optimized process conditions, the maximum removals of 4-CP and chemical oxygen demand (COD) were obtained to be 91.07 and 75.29%, respectively. In addition, three kinetic models, i.e. second-order, Monod and modified Stover-Kincannon models, were employed to investigate the behaviour of MBBR during 4-CP biodegradation. The high regression coefficients obtained by the second-order and modified Stover-Kincannon models showed better accuracy for estimating substrate degradation kinetics. The phytotoxicity study supported that the Vigna radiata seeds germinated in treated wastewater showed higher growth (i.e. radicle and plumule) than the untreated wastewater.

Collective removal of phenol and ammonia in a moving bed biofilm reactor using modified bio-carriers: Process optimization and kinetic study.

The performance of a moving bed biofilm reactor (MBBR) with bio-carriers made of polypropylene-polyurethane foam (PP-PUF) was evaluated for the collective removal of phenol and ammonia. Three independent variables, including pH (5.0-8.0), retention time (2.0-12.0 h), and airflow rate (0.8-3.5 L/min) were optimized using central composite design (CCD) of response surface methodology (RSM). The maximum removal of phenol and ammonia was obtained to be 92.6, and 91.8%, respectively, in addition to the removal of 72.3% in the chemical oxygen demand (COD) level at optimum conditions. First-order and second-order kinetic models were analyzed to evaluate the pollutants removal kinetics in a MBBR. Finally, a second-order model was found to be appropriate for predicting reaction kinetics. The values of second-order rate constants were obtained to be 2.35, 0.25, and 1.85 L2/gVSS gCOD h for phenol, COD, and ammonia removal, respectively.