The Effect of 3-Dimensional-Printed Sequential Dual Drug-Releasing Patch on the Capsule Formation Around the Silicone Implant in a Rat Model.

BACKGROUND: Implant-based breast reconstruction is associated with increased risk of early infection and late-stage capsular contracture. OBJECTIVES: We evaluated the feasibility of a dual drug-releasing patch that enabled the controlled delivery of antibiotics and immunosuppressants in a temporally and spatially appropriate manner to the implant site. METHODS: The efficacy of a dual drug-releasing patch, which was 3-dimensional-printed (3D-printed) with tissue-derived biomaterial ink, was evaluated in rats with silicone implants. The groups included implant only (n = 10); implant plus bacterial inoculation (n = 14); implant, bacterial inoculation, and patch loaded with gentamycin placed on the ventral side of the implant (n = 10), and implant, bacterial inoculation, and patch loaded with gentamycin and triamcinolone acetonide (n = 9). Histologic and immunohistochemical analyses were performed 8 weeks after implantation. RESULTS: The 2 drugs were sequentially released from the dual drug-releasing patch and exhibited different release profiles. Compared to the animals with bacterial inoculation, those with the antibiotic-only and the dual drug-releasing patch exhibited thinner capsules and lower myofibroblast activity and inflammation, indicating better tissue integration and less foreign body response. These effects were more pronounced with the dual drug-releasing patch than with the antibiotic-only patch. CONCLUSIONS: The 3D-printed dual drug-releasing patch effectively reduced inflammation and capsule formation in a rat model of silicone breast reconstruction. The beneficial effect of the dual drug-releasing patch was better than that of the antibiotic-only patch, indicating its therapeutic potential as a novel approach to preventing capsular contracture while reducing concerns of systemic side effects.

Programming temporal stiffness cues within extracellular matrix hydrogels for modelling cancer niches.

Extracellular matrix (ECM) stiffening is a common occurrence during the progression of many diseases, such as breast cancer. To accurately mimic the pathophysiological context of disease within 3D in vitro models, there is high demand for smart biomaterials which replicate the dynamic and temporal mechanical cues of diseased states. This study describes a preclinical disease model, using breast cancer as an example, which replicates the dynamic plasticity of the tumour microenvironment by incorporating temporal (3-week progression) biomechanical cues within a tissue-specific hydrogel microenvironment. The composite hydrogel formulation, integrating adipose-derived decellularised ECM (AdECM) and silk fibroin, was initially crosslinked using a visible light-mediated system, and then progressively stiffened through spontaneous secondary structure interactions inherent between the polymer chains (∼10-15 kPa increase, with a final stiffness of 25 kPa). When encapsulated and cultured in vitro, MCF-7 breast cancer cells initially formed numerous, large spheroids (>1000 µm2 in area), however, with progressive temporal stiffening, cells demonstrated growth arrest and underwent phenotypic changes resulting in intratumoral heterogeneity. Unlike widely-investigated static mechanical models, this stiffening hydrogel allowed for progressive phenotypic changes to be observed, and fostered the development of mature organoid-like spheroids, which mimicked both the organisation and acinar-structures of mature breast epithelium. The spheroids contained a central population of cells which expressed aggressive cellular programs, evidenced by increased fibronectin expression and reduction of E-cadherin. The phenotypic heterogeneity observed using this model is more reflective of physiological tumours, demonstrating the importance of establishing temporal cues within preclinical models in future work. Overall, the developed model demonstrated a novel strategy to uncouple ECM biomechanical properties from the cellular complexities of the disease microenvironment and offers the potential for wide applicability in other 3D in vitro disease models through addition of tissue-specific dECM materials.

3D Cell Printing of Advanced Vascularized Proximal Tubule-on-a-Chip for Drug Induced Nephrotoxicity Advancement.

Renal dysfunction due to drug-induced nephrotoxicity (DIN) affects >20% of the adult population worldwide. The vascularized proximal tubule is a complex structure that is often the primary site of drug-induced kidney injury. Herein, a vascularized proximal tubule-on-a-chip (Vas-POAC) was fabricated, demonstrating improved physiological emulation over earlier single-cell proximal tubule models. A perfusable model of vascularized proximal tubules permits the growth and proliferation of renal proximal tubule cells and adjacent endothelial cells under various conditions. An in vitro Vas-POAC showed mature expressions of the tubule and endothelial cell markers in the mature epithelium and endothelium lumens after 7 days of culture. Expression in the mature proximal tubule epithelium resembled the polarized expression of sodium-glucose cotransporter-2 and the de novo synthesis of ECM proteins. These perfusable Vas-POACs display significantly improved functional properties relative to the proximal tubules-on-a-chip (POAC), which lacks vascular components. Furthermore, the developed Vas-POAC model evaluated the cisplatin-induced nephrotoxicity and revealed enhanced drug receptivity compared to POAC. We further evaluated the capability of the developed proximal tubule model to act as a functional platform that targets screening drug doses that can cause renal proximal tubule injury in adults. Thus, our cell-printed models may prove valuable for screening, thoughtful mechanistic investigations of DIN, and discovery of drugs that interfere with tubule formation.

3D bioprinted vascularized lung cancer organoid models with underlying disease capable of more precise drug evaluation.

Despite encouraging progress in the development ofin vitrocancer models,in vitrocancer models that simultaneously recapitulate the complexity of the tumor microenvironment and its diverse cellular components and genetic properties remain lacking. Here, an advanced vascularized lung cancer (LC) model is proposed, which includes patient-derived LC organoids (LCOs), lung fibroblasts, and perfusable vessels using 3D bioprinting technology. To better recapitulate the biochemical composition of native lung tissues, a porcine lung-derived decellularized extracellular matrix (LudECM) hydrogel was produced to offer physical and biochemical cues to cells in the LC microenvironment. In particular, idiopathic pulmonary fibrosis-derived lung fibroblasts were used to implement fibrotic niches similar to actual human fibrosis. It was shown that they increased cell proliferation and the expression of drug resistance-related genes in LCOs with fibrosis. In addition, changes in resistance to sensitizing targeted anti-cancer drugs in LCOs with fibrosis were significantly greater in LudECM than in that Matrigel. Therefore, assessment of drug responsiveness in vascularized LC models that recapitulate lung fibrosis can help determine the appropriate therapy for LC patients accompanied by fibrosis. Furthermore, it is expected that this approach could be utilized for the development of targeted therapies or the identification of biomarkers for LC patients accompanied by fibrosis.

3D printed multi-growth factor delivery patches fabricated using dual-crosslinked decellularized extracellular matrix-based hybrid inks to promote cerebral angiogenesis.

Generally, brain angiogenesis is a tightly regulated process, which scarcely occurred in the absence of specific pathological conditions. Delivery of exogenous angiogenic factors enables the induction of desired angiogenesis by stimulating neovasculature formation. However, effective strategies of mimicking the angiogenesis process with exogenous factors have not yet been fully explored. Herein, we develop a 3D printed spatiotemporally compartmentalized cerebral angiogenesis inducing (SCAI) hydrogel patch, releasing dual angiogenic growth factors (GFs), using extracellular matrix-based hybrid inks. We introduce a new hybrid biomaterial-based ink for printing patches through dual crosslinking mechanisms: Chemical crosslinking with aza-Michael addition reaction with combining methacrylated hyaluronic acid (HAMA) and vascular-tissue-derived decellularized extracellular matrix (VdECM), and thermal crosslinking of VdECM. 3D printing technology, a useful approach with fabrication versatility with customizable systems and multiple biomaterials, is adopted to print three-layered hydrogel patch with spatially separated dual GFs as outer- and inner-layers that provide tunable release profiles of multiple GFs and fabrication versatility. Consequently, these layers of the patch spatiotemporally separated with dual GFs induce excellent neovascularization in the brain area, monitored by label-free photoacoustic microscopy in vivo. The developed multi-GFs releasing patch may offer a promising therapeutic approach of spatiotemporal drugs releasing such as cerebral ischemia, ischemic heart diseases, diabetes, and even use as vaccines. STATEMENT OF SIGNIFICANCE: Effective strategies of mimicking the angiogenesis process with exogenous factors have not yet been fully explored. In this study, we develop a 3D printed spatiotemporally compartmentalized cerebral angiogenesis inducing (SCAI) hydrogel patch, releasing dual angiogenic growth factors (GFs) using extracellular matrix-based hybrid inks. We introduce a new hybrid biomaterial-based ink through dual crosslinking mechanisms: Chemical crosslinking with aza-Michael addition, and thermal crosslinking. 3D printing technology is adopted to print three-layered hydrogel patch with spatially separated dual GFs as outer- and inner-layers that provide tunable release profiles of multiple GFs and fabrication versatility. Consequently, these layers of the patch spatiotemporally separated with dual GFs induce excellent neovascularization in the brain area, monitored by photoacoustic microscopy in vivo.

A Bioprinted Bruch's Membrane for Modeling Smoke-Induced Retinal Pigment Epithelium Degeneration via Hybrid Membrane Printing Technology.

The retinal pigment epithelium (RPE) not only forms the outer blood-retinal barrier (oBRB) but also plays a multifunctional role in the ocular system. The loss of this epithelium leads to serious diseases resulting in vision impairment. No effective treatment is available for the repair of RPE damage. A functional in vitro RPE model that allows the recapitulation of oBRB-related pathophysiological responses is lacking. Here, a hybrid membrane printing technology is developed to fabricate cellular monolayers on the basement membrane to mimic human Bruch's membrane (BM). Using this technology, in vitro oBRB model containing the RPE monolayer on the printed BM with stable mechanical properties and fibril diameter similar to that of natural BM is developed. Compared to traditional collagen bioink, BM-based bioink significantly promotes RPE functions in vitro. Finally, smoking-like conditions are exposed to the model to recapitulate the absorption of mainstream cigarette smoke which is known as one of the risk factors for the disease progression. RPE function is damaged due to oxidative stress. Furthermore, the versatility of the model as a drug-testing platform is confirmed by the suppression of oxidative stress via antioxidants. This technology shows potential for fabricating a functional oBRB model that reflects patient conditions.

Bi-modal near-infrared fluorescence and ultrasound imaging via a transparent ultrasound transducer for sentinel lymph node localization: publisher's note.

This publisher's note contains a correction to Opt. Lett.47, 393 (2022)10.1364/OL.446041.

Enhanced Differentiation Capacity and Transplantation Efficacy of Insulin-Producing Cell Clusters from Human iPSCs Using Permeable Nanofibrous Microwell-Arrayed Membrane for Diabetes Treatment.

Although pancreatic islet transplantation is a potentially curative treatment for insulin-dependent diabetes, a shortage of donor sources, low differentiation capacity, and transplantation efficacy are major hurdles to overcome before becoming a standard therapy. Stem cell-derived insulin-producing cells (IPCs) are a potential approach to overcoming these limitations. To improve the differentiation capacity of the IPCs, cell cluster formation is crucial to mimic the 3D structure of the islet. This study developed a biodegradable polycaprolactone (PCL) electrospun nanofibrous (NF) microwell-arrayed membrane permeable to soluble factors. Based on the numerical analysis and experimental diffusion test, the NF microwell could provide sufficient nutrients, unlike an impermeable PDMS (polydimethylsiloxane) microwell. The IPC clusters in the NF microwells showed higher gene expression of insulin and PDX1 and insulin secretion than the PDMS microwells. The IPC clusters in the NF microwell-arrayed membrane could be directly transplanted. Transplanted IPC clusters in the microwells survived well and expressed PDX1 and insulin. Additionally, human c-peptide was identified in the blood plasma at two months after transplantation of the membranes. The NF microwell-arrayed membrane can be a new platform promoting IPC differentiation capacity and realizing an in situ transplantation technique for diabetic patients.

Bi-modal near-infrared fluorescence and ultrasound imaging via a transparent ultrasound transducer for sentinel lymph node localization.

Sentinel lymph node biopsy with an indocyanine green-based near-infrared fluorescence imaging system avoids the shortcomings of using a radioisotope or a combination of a blue dye and a radioactive tracer. To improve surgical precision, recent research has provided a depth profile of the sentinel lymph node by fusing fluorescence and ultrasound imaging. Here, we present a combined near-infrared fluorescence and ultrasound imaging system based on a transparent ultrasound transducer. The transparent ultrasound transducer enables seamless coaxial alignment of the fluorescence and ultrasound beam paths, allowing bi-modal observation of a single region of interest. Further, we demonstrate that the sentinel lymph node of mice injected with indocyanine green can be successfully localized and dissected based on information from the bi-modal imaging system.

A Bioprinted Tubular Intestine Model Using a Colon-Specific Extracellular Matrix Bioink.

Tremendous advances have been made toward accurate recapitulation of the human intestinal system in vitro to understand its developmental process, and disease progression. However, current in vitro models are often confined to 2D or 2.5D microarchitectures, which is difficult to mimic the systemic level of complexity of the native tissue. To overcome this problem, physiologically relevant intestinal models are developed with a 3D hollow tubular structure using 3D bioprinting strategy. A tissue-specific biomaterial, colon-derived decellularized extracellular matrix (Colon dECM) is developed and it provides significant maturation-guiding potential to human intestinal cells. To fabricate a perfusable tubular model, a simultaneous printing process of multiple materials through concentrically assembled nozzles is developed and a light-activated Colon dECM bioink is employed by supplementing with ruthenium/sodium persulfate as a photoinitiator. The bioprinted intestinal tissue models show spontaneous 3D morphogenesis of the human intestinal epithelium without any external stimuli. In consequence, the printed cells form multicellular aggregates and cysts and then differentiate into several types of enterocytes, building junctional networks. This system can serve as a platform to evaluate the effects of potential drug-induced toxicity on the human intestinal tissue and create a coculture model with commensal microbes and immune cells for future therapeutics.

Recapitulating the Cancer Microenvironment Using Bioprinting Technology for Precision Medicine.

The complex and heterogenous nature of cancer contributes to the development of cancer cell drug resistance. The construction of the cancer microenvironment, including the cell-cell interactions and extracellular matrix (ECM), plays a significant role in the development of drug resistance. Traditional animal models used in drug discovery studies have been associated with feasibility issues that limit the recapitulation of human functions; thus, in vitro models have been developed to reconstruct the human cancer system. However, conventional two-dimensional and three-dimensional (3D) in vitro cancer models are limited in their ability to emulate complex cancer microenvironments. Advances in technologies, including bioprinting and cancer microenvironment reconstruction, have demonstrated the potential to overcome some of the limitations of conventional models. This study reviews some representative bioprinted in vitro models used in cancer research, particularly fabrication strategies for modeling and consideration of essential factors needed for the reconstruction of the cancer microenvironment. In addition, we highlight recent studies that applied such models, including application in precision medicine using advanced bioprinting technologies to fabricate biomimetic cancer models. Furthermore, we discuss current challenges in 3D bioprinting and suggest possible strategies to construct in vitro models that better mimic the pathophysiology of the cancer microenvironment for application in clinical settings.

Neural stem cell delivery using brain-derived tissue-specific bioink for recovering from traumatic brain injury.

Traumatic brain injury is one of the leading causes of accidental death and disability. The loss of parts in a severely injured brain induces edema, neuronal apoptosis, and neuroinflammation. Recently, stem cell transplantation demonstrated regenerative efficacy in an injured brain. However, the efficacy of current stem cell therapy needs improvement to resolve issues such as low survival of implanted stem cells and low efficacy of differentiation into respective cells. We developed brain-derived decellularized extracellular matrix (BdECM) bioink that is printable and has native brain-like stiffness. This study aimed to fabricate injured cavity-fit scaffold with BdECM bioink and assessed the utility of BdECM bioink for stem cell delivery to a traumatically injured brain. Our BdECM bioink had shear thinning property for three-dimensional (3D)-cell-printing and physical properties and fiber structures comparable to those of the native brain, which is important for tissue integration after implantation. The human neural stem cells (NSCs) (F3 cells) laden with BdECM bioink were found to be fully differentiated to neurons; the levels of markers for mature differentiated neurons were higher than those observed with collagen bioinkin vitro. Moreover, the BdECM bioink demonstrated potential in defect-fit carrier fabrication with 3D cell-printing, based on the rheological properties and shape fidelity of the material. As F3 cell-laden BdECM bioink was transplanted into the motor cortex of a rat brain, high efficacy of differentiation into mature neurons was observed in the transplanted NSCs; notably increased level of MAP2, a marker of neuronal differentiation, was observed. Furthermore, the transplanted-cell bioink suppressed reactive astrogliosis and microglial activation that may impede regeneration of the injured brain. The brain-specific material reported here is favorable for NSC differentiation and suppression of neuroinflammation and is expected to successfully support regeneration of a traumatically injured brain.

A 3D bioprinted hybrid encapsulation system for delivery of human pluripotent stem cell-derived pancreatic islet-like aggregates.

Islet transplantation is a promising treatment for type 1 diabetes. However, treatment failure can result from loss of functional cells associated with cell dispersion, low viability, and severe immune response. To overcome these limitations, various islet encapsulation approaches have been introduced. Among them, macroencapsulation offers the advantages of delivering and retrieving a large volume of islets in one system. In this study, we developed a hybrid encapsulation system composed of a macroporous polymer capsule with stagger-type membrane and assemblable structure, and a nanoporous decellularized extracellular matrix (dECM) hydrogel containing pancreatic islet-like aggregates using 3D bioprinting technique. The outer part (macroporous polymer capsule) was designed to have an interconnected porous architecture, which allows insulin-producingß-cells encapsulated in the hybrid encapsulation system to maintain their cellular behaviors, including viability, cell proliferation, and insulin-producing function. The inner part (nanoporous dECM hydrogel), composed of the 3D biofabricated pancreatic islet-like aggregates, was simultaneously placed into the macroporous polymer capsule in one step. The developed hybrid encapsulation system exhibited biocompatibilityin vitroandin vivoin terms of M1 macrophage polarization. Furthermore, by controlling the printing parameters, we generated islet-like aggregates, improving cell viability and functionality. Moreover, the 3D bioprinted pancreatic islet-like aggregates exhibited structural maturation and functional enhancement associated with intercellular interaction occurring at theß-cell edges. In addition, we also investigated the therapeutic potential of a hybrid encapsulation system by integrating human pluripotent stem cell-derived insulin-producing cells, which are promising to overcome the donor shortage problem. In summary, these results demonstrated that the 3D bioprinting approach facilitates the fabrication of a hybrid islet encapsulation system with multiple materials and potentially improves the clinical outcomes by driving structural maturation and functional improvement of cells.

Quantitative Photothermal Characterization with Bioprinted 3D Complex Tissue Constructs for Early-Stage Breast Cancer Therapy Using Gold Nanorods.

Plasmonic photothermal therapy (PPTT) using gold nanoparticles (AuNPs) has shown great potential for use in selective tumor treatment, because the AuNPs can generate destructive heat preferentially upon irradiation. However, PPTT using AuNPs has not been added to practice, owing to insufficient heating methods and tissue temperature measurement techniques, leading to unreliable and inaccurate treatments. Because the photothermal properties of AuNPs vary with laser power, particle optical density, and tissue depth, the accurate prediction of heat generation is indispensable for clinical treatment. In this report, bioprinted 3D complex tissue constructs comprising processed gel obtained from porcine skin and human decellularized adipose tissue are presented for characterization of the photothermal properties of gold nanorods (AuNRs) having an aspect ratio of 3.7 irradiated by a near-infrared laser. Moreover, an analytical function is suggested for achieving PPTT that can cause thermal damage selectively on early-stage human breast cancer by regulating the heat generation of the AuNRs in the tissue.

3D Bioprinting-Based Vascularized Tissue Models Mimicking Tissue-Specific Architecture and Pathophysiology for in vitro Studies.

A wide variety of experimental models including 2D cell cultures, model organisms, and 3D in vitro models have been developed to understand pathophysiological phenomena and assess the safety and efficacy of potential therapeutics. In this sense, 3D in vitro models are an intermediate between 2D cell cultures and animal models, as they adequately reproduce 3D microenvironments and human physiology while also being controllable and reproducible. Particularly, recent advances in 3D in vitro biomimicry models, which can produce complex cell structures, shapes, and arrangements, can more similarly reflect in vivo conditions than 2D cell culture. Based on this, 3D bioprinting technology, which enables to place the desired materials in the desired locations, has been introduced to fabricate tissue models with high structural similarity to the native tissues. Therefore, this review discusses the recent developments in this field and the key features of various types of 3D-bioprinted tissues, particularly those associated with blood vessels or highly vascularized organs, such as the heart, liver, and kidney. Moreover, this review also summarizes the current state of the three categories: (1) chemical substance treatment, (2) 3D bioprinting of lesions, and (3) recapitulation of tumor microenvironments (TME) of 3D bioprinting-based disease models according to their disease modeling approach. Finally, we propose the future directions of 3D bioprinting approaches for the creation of more advanced in vitro biomimetic 3D tissues, as well as the translation of 3D bioprinted tissue models to clinical applications.

Controlling Cancer Cell Behavior by Improving the Stiffness of Gastric Tissue-Decellularized ECM Bioink With Cellulose Nanoparticles.

A physiologically relevant tumor microenvironment is favorable for the progression and growth of gastric cancer cells. To simulate the tumor-specific conditions of in vivo environments, several biomaterials engineering studies have investigated three-dimensional (3D) cultures. However, the implementation of such cultures remains limited because of challenges in outlining the biochemical and biophysical characteristics of the gastric cancer microenvironment. In this study, we developed a 3D cell printing-based gastric cancer model, using a combination of gastric tissue-specific bioinks and cellulose nanoparticles (CN) to provide adequate stiffness to gastric cancer cells. To create a 3D gastric tissue-specific microenvironment, we developed a decellularization process for a gastric tissue-derived decellularized extracellular matrix (g-dECM) bioink, and investigated the effect of the g-dECM bioink on promoting the aggressiveness of gastric cancer cells using histological and genetic validation methods. We found that incorporating CN in the matrix improves its mechanical properties, which supports the progression of gastric cancer. These mechanical properties are distinguishing characteristics that can facilitate the development of an in vitro gastric cancer model. Further, the CN-supplemented g-dECM bioink was used to print a variety of free-standing 3D shapes, including gastric rugae. These results indicate that the proposed model can be used to develop a physiologically relevant gastric cancer system that can be used in future preclinical trials.

Quadruple ultrasound, photoacoustic, optical coherence, and fluorescence fusion imaging with a transparent ultrasound transducer.

Ultrasound and optical imagers are used widely in a variety of biological and medical applications. In particular, multimodal implementations combining light and sound have been actively investigated to improve imaging quality. However, the integration of optical sensors with opaque ultrasound transducers suffers from low signal-to-noise ratios, high complexity, and bulky form factors, significantly limiting its applications. Here, we demonstrate a quadruple fusion imaging system using a spherically focused transparent ultrasound transducer that enables seamless integration of ultrasound imaging with photoacoustic imaging, optical coherence tomography, and fluorescence imaging. As a first application, we comprehensively monitored multiparametric responses to chemical and suture injuries in rats' eyes in vivo, such as corneal neovascularization, structural changes, cataracts, and inflammation. As a second application, we successfully performed multimodal imaging of tumors in vivo, visualizing melanomas without using labels and visualizing 4T1 mammary carcinomas using PEGylated gold nanorods. We strongly believe that the seamlessly integrated multimodal system can be used not only in ophthalmology and oncology but also in other healthcare applications with broad impact and interest.

Tissue printing for engineering transplantable human parathyroid patch to improve parathyroid engraftment, integration, and hormone secretionin vivo.

During thyroid surgery, some parathyroid glands fail to maintain their function, therefore, they are unavoidably detached from the patient. For the purpose of re-preservation of the function, they are minced into small segments and transplanted into the fat or muscle layer. Yet, this method of auto-grafting the parathyroid glands is frequently unsuccessful due to its poor interaction and engraftment with the native tissue, eventually leading to the dysfunction of the parathyroid hormone (PTH) secretion. In this study, we suggest a methodology to restore parathyroid activity through the introduction of the 'tissue printing' concept. Parathyroid glands of patients with secondary hyperparathyroidism were minced into the fragments smaller than 0.5 × 0.5 mm, which is in common with the traditional surgical method. These parathyroid tissues (PTs) were uniformly mixed with the adipose-derived decellularized extracellular matrix (adECM) bioink that protects the PTs from hostilein vivoenvironments and promote initial engraftment. PTs-encapsulated adECM bioink (PTs-adECM) was then printed onto the pre-designed polycaprolactone (PCL) mesh to produce patch-type PTs construct, which functions as a mechanical support to further enhance long-termin vivostability. The engineered patch was transplanted subcutaneously into rats and harvested after 4 weeks.In vivoresults showed that the engineered patches were well engrafted and stabilized in their original position for 4 weeks as compared with PTs only. Immunohistochemistry results further revealed that the concentration of PTH was approximately 2.5-fold greater in rats engrafted in the patch. Taken together, we envision that the novel concept 'tissue printing' over cell printing could provide a closer step towards clinical applications of 3D bioprinting to solve the unmet need for parathyroid surgery method.

3D Cell-Printed Hypoxic Cancer-on-a-Chip for Recapitulating Pathologic Progression of Solid Cancer.

Cancer microenvironment has a significant impact on the progression of the disease. In particular, hypoxia is the key driver of cancer survival, invasion, and chemoresistance. Although several in vitro models have been developed to study hypoxia-related cancer pathology, the complex interplay of the cancer microenvironment observed in vivo has not been reproduced yet owing to the lack of precise spatial control. Instead, 3D biofabrication approaches have been proposed to create microphysiological systems for better emulation of cancer ecology and accurate anticancer treatment evaluation. Herein, we propose a 3D cell-printing approach to fabricate a hypoxic cancer-on-a-chip. The hypoxia-inducing components in the chip were determined based on a computer simulation of the oxygen distribution. Cancer-stroma concentric rings were printed using bioinks containing glioblastoma cells and endothelial cells to recapitulate a type of solid cancer. The resulting chip realized central hypoxia and aggravated malignancy in cancer with the formation of representative pathophysiological markers. Overall, the proposed approach for creating a solid-cancer-mimetic microphysiological system is expected to bridge the gap between in vivo and in vitro models for cancer research.

3D printing of drug-loaded multi-shell rods for local delivery of bevacizumab and dexamethasone: A synergetic therapy for retinal vascular diseases.

The clinical therapy for retinal vascular diseases requires repeated intravitreal injections of drugs owing to their short half-life, which imposes health and economic burdens on patients. Therefore, it is necessary to develop an advanced drug delivery system that can prolong the drug activity and minimize secondary complications. In this study, we developed a core/shell drug-loaded rod (drug rod) to deliver two types of drugs (bevacizumab (BEV) and dexamethasone (DEX)) from a single implant. The coaxial printing technique allowed BEV and DEX to be released with different kinetics at the same site by using a polymeric shell and a hydrogel core, respectively. The suggested printing technique facilitates the production of drug rods with various dimensions and drug concentrations, and the multi-layered design allows to adjust the release profile of dual drug-delivery system. The rod was injected in rat vitreous less invasively using a small-gauge needle. Further, we validated the efficacy of the implanted drug rods in inhibiting inflammatory responses and long-term suppression of neovascularization compared to the conventional intravitreal injection of BEV in animal model, indicating that the drug rods can be an alternative therapeutic approach for the treatment of various types of retinal vascular diseases.