[Partial exchange in total hip arthroplasty : What can we combine?] / Gelenkteilwechsel in der Hüftarthroplastik : Was dürfen wir kombinieren?

BACKGROUND: In case of hip revision arthroplasty, one component (cup/stem) is often well fixed and does not need to be exchanged. The newly implanted component needs to be compatible with the well-fixed implant. The combination of implants from different companies leads to "mix and match" or even mismatch between the implants. OBJECTIVES AND METHODS: The objective of this work was to describe possible combinations including their specifications that need to be considered in partial exchange of hip prostheses. For this purpose the literature, surgical techniques of companies and judgements concerning this topic were analysed and our own results and experiences were included. RESULTS AND CONCLUSIONS: Partial revision arthroplasty can be challenging and needs to be planned in detail. In case of isolated cup or inlay revision with exchange of a modular head the cone of the stem needs to be identified. A ceramic head may be used in revision with a titanium sleeve even from a different company as long as they are compatible. Patients however need to give their informed consent for this mix and match procedure. This procedure is done frequently and good study results support this, however from a juristic point of view a definite recommendation cannot be given. If the inlay of a cup is replaced, the original inlay should be used. If this is not available anymore, it can be manufactured as a special product in many cases. If this is also not possible, an inlay can also be cemented into a well-fixed cup. Biomechanical and clinical studies support this off-label technique. In case of an isolated exchange of the stem with a ceramic inlay that is retained in a well-fixed cup, the revision stem and ceramic head need to be from the same company as the cup. In case of ceramic fracture, a ceramic head with a titanium sleeve should be combined with a PE or ceramic inlay, a metal head or inlay should never be used.

[Does the certification according to EndoCert lead to a better quality of treatment?] / Bringt die Zertifizierung nach EndoCert eine messbare Verbesserung der Versorgungsqualität?

BACKGROUND: Certification according to EndoCert in the field of arthroplasty in Germany aims at standardization of treatment and with this optimization of its quality. However, huge capital investment and efforts are necessary. There are currently more than 400 certified centres in Germany. Our Department of Orthopaedics at a German medical school was certified in the pilot phase. The aim of this study was to analyse whether there was a difference in the quality in the year after the certification. A second aim was to analyse whether the defined quality criteria are adequate for a university hospital. MATERIALS AND METHODS: The quality criteria as defined by EndoCert were analysed in the year before (2011) and after certification (2012). The observed complications were noted for 1 year postoperatively. The clinical outcome was analysed with Western Ontario and McMaster University Osteoarthritis Index Score (WOMAC) 1 year postoperatively. RESULTS: There was no difference concerning the criteria analysed, including the clinical outcome in the year before and that after certification. In both years, nearly all criteria could be reached except the operation time and the infection rate in hip and knee revision surgery. CONCLUSION: Certification did not lead to a measurable change of the quality of care. Nearly all criteria, except the infection rate in revision arthroplasty (required: less than 3% at 1 year postop.) and the operation duration could be fulfilled. This rate as well as the operation duration should be revised. Certification according to EndoCert is an important tool to prove quality care, however big efforts and capital are needed. The criteria should be constantly revised and reduced, as these resources should not be missed in patient care.

Histopathological Analysis of PEEK Wear Particle Effects on the Synovial Tissue of Patients.

Introduction. Increasing interest developed in the use of carbon-fiber-reinforced-poly-ether-ether-ketones (CFR-PEEK) as an alternative bearing material in knee arthroplasty. The effects of CFR-PEEK wear in in vitro and animal studies are controversially discussed, as there are no data available concerning human tissue. The aim of this study was to analyze human tissue containing CFR-PEEK as well as UHMWPE wear debris. The authors hypothesized no difference between the used biomaterials. Methods and Materials. In 10 patients during knee revision surgery of a rotating-hinge-knee-implant-design, synovial tissue samples were achieved (tibial inserts: UHMWPE; bushings and flanges: CFR-PEEK). One additional patient received revision surgery without any PEEK components as a control. The tissue was paraffin-embedded, sliced into 2 µm thick sections, and stained with hematoxylin and eosin in a standard process. A modified panoptical staining was also done. Results. A "wear-type" reaction was seen in the testing and the control group. In all samples, the UHMWPE particles were scattered in the tissue or incorporated in giant cells. CFR-PEEK particles were seen as conglomerates and only could be found next to vessels. CFR-PEEK particles showed no giant-cell reactions. In conclusion, the hypothesis has to be rejected. UHMWPE and PEEK showed a different scatter-behavior in human synovial tissue.

[What can we learn in future from the data of the German Arthroplasty Registry (EPRD) in comparison to other registries?]. / Welcher Zusatznutzen ergibt sich in Zukunft aus den Daten des EPRD im Vergleich zu anderen Registern?

The German Arthroplasty Registry (EPRD) was founded in 2010 and has been in full operation since 2014. Previous attempts at a systematic data collection of elective and non-elective knee and hip replacement in Germany failed mainly because of the long-term lack of funding. The EPRD is an interdisciplinary collaborative partnership between the German Association of Orthopedics and Orthopedic Surgery (DGOOC), all implant manufacturers of the German Medical Technology Association (BVMed), health insurers (AOK and the Association of Additional Healthcare Insurance) and hospitals (German Hospital Federation). As part of this cooperation a worldwide unique implant database has been set up, which includes all relevant components and a detailed description of implant specifications. This implant library enables a detailed evaluation of implant survival, revision rates and possible inferior implant performance of knee and hip replacements in Germany. At the end of 2015 the EPRD encompassed over 200,000 registered operations. Due to the high number of hip and knee arthroplasties in Germany with many different implants from different manufacturers there will be a rapid growth of data that are available for a national and also international comparison of the results.

Development and validation of a weight-bearing finite element model for total knee replacement.

Total knee arthroplasty (TKA) is a successful procedure for osteoarthritis. However, some patients (19%) do have pain after surgery. A finite element model was developed based on boundary conditions of a knee rig. A 3D-model of an anatomical full leg was generated from magnetic resonance image data and a total knee prosthesis was implanted without patella resurfacing. In the finite element model, a restarting procedure was programmed in order to hold the ground reaction force constant with an adapted quadriceps muscle force during a squat from 20° to 105° of flexion. Knee rig experimental data were used to validate the numerical model in the patellofemoral and femorotibial joint. Furthermore, sensitivity analyses of Young's modulus of the patella cartilage, posterior cruciate ligament (PCL) stiffness, and patella tendon origin were performed. Pearson's correlations for retropatellar contact area, pressure, patella flexion, and femorotibial ap-movement were near to 1. Lowest root mean square error for retropatellar pressure, patella flexion, and femorotibial ap-movement were found for the baseline model setup with Young's modulus of 5 MPa for patella cartilage, a downscaled PCL stiffness of 25% compared to the literature given value and an anatomical origin of the patella tendon. The results of the conducted finite element model are comparable with the experimental results. Therefore, the finite element model developed in this study can be used for further clinical investigations and will help to better understand the clinical aspects after TKA with an unresurfaced patella.

Therapeutic effect of methotrexate encapsulated in cationic liposomes (EndoMTX) in comparison to free methotrexate in an antigen-induced arthritis study in vivo.

OBJECTIVES: Cationic lipid complexes bind to angiogenic endothelial cells of solid tumours and microvessels of chronic inflammatory tissue. Methotrexate (MTX) is one of the drugs used in the therapy of rheumatoid arthritis (RA); it is applied systemically but can have serious side-effects. The aim of this study was to investigate the impact of MTX encapsulated in cationic liposomes (EndoMTX) in comparison to treatment with free MTX. METHOD: We used an antigen-induced arthritis (AiA) model and investigated the leucocyte- and platelet-endothelial cell interaction in arthritic female C57/Bl6 mice and in healthy controls. The arthritic animals were divided into four different groups receiving either trehalose, free MTX, EndoMTX placebo, or EndoMTX. These parameters and functional capillary density (FCD) were measured and assessed by intravital microscopy (IVM). We controlled clinical parameters such as the knee joint diameter (KJD) throughout the observation period. RESULTS: Animals treated with EndoMTX showed a significant and superior reduction in leucocyte- and platelet-endothelial cell interaction, FCD, and KJD. Free MTX or empty liposomes also showed a reduction in these parameters but not to a significant level. FCD decreased in the EndoMTX group in comparison to using free drugs or empty carrier-like liposomes. CONCLUSIONS: This study demonstrates the advantage of using MTX encapsulated in cationic liposomes in contrast to free and generic MTX, with a higher efficacy in anti-inflammatory and anti-angiogenic abilities. Targeting with cationic liposomes may be a promising treatment option and should be elucidated in further experiments regarding dose reduction and side-effects due to MTX usage.

[Experience with medial unicompartmental prostheses with a mobile plateau]. / Erfahrungen mit medialen monokondylären Prothesen mit mobilem Plateau.

BACKGROUND: Unicompartmental knee arthroplasty (UKA) has become an accepted therapy for medial osteoarthritis. The main reasons for its popularity are the minimally invasive surgical technique and the reports of excellent long-term results including high patient satisfaction and good knee joint function especially in younger patients. OBJECTIVES: The purpose of our retrospective study was to evaluate the physical activities of patients who had undergone an Oxford III medial UKA. Special attention was paid to implant positioning and osteoarthritis of the patellofemoral joint. MATERIALS AND METHODS: Of 181 implanted Oxford III prosthesis, 136 (75.1%) could be followed up. The mean age at time of surgery was 65.2 years; the average time of follow-up was 4.2 years. In addition to a physical examination and x-ray, the following scores were obtained: WOMAC (Western Ontario and McMaster Osteoarthritis Index), OKS (Oxford Knee Score), KSS (Knee Society Score), UCLA activity and the Turba score. RESULTS: The majority of the patients (81%) returned to their sporting activity following knee surgery. Higher complication rates or progression of osteoarthritis associated with sporting activities were not observed. The active patients had significantly higher scores for the OKS, KSS, WOMAC, and UCLA scores. The correct implant position, especially avoiding overcorrection to valgus malalignment, is important for good clinical outcome. CONCLUSION: Our results demonstrate that a high degree of patient satisfaction in terms of physical and sporting activity can be achieved using the Oxford III UKA for medial osteoarthritis without an increased risk for complications.

[Modified mini-Hardinge access for hip prosthesis implantation in the supine position]. / Modifizierter Mini-Hardinge-Zugang zur Implantation von Hüftgelenksprothesen in Rückenlage.

OBJECTIVE: Total hip arthroplasty with a minimal-incision technique that can be performed in the widely used supine position. The accustomed and good overview of this position allows safe positioning of the implant and combines this with the advantage of a soft tissue preserving technique. All standard instruments and implants can be further applied. INDICATIONS: Primary and secondary coxarthrosis, femoral head necrosis. CONTRAINDICATIONS: Revision surgery, severe anatomic deformity, implantation of hip resurfacing arthroplasty. SURGICAL TECHNIQUE: Supine position. The skin incision runs from the innominate tubercle proximally and falls slightly in the dorsal direction (20-30°). Incision of the iliotibial tract and exposure of the vastogluteal muscle sling. Starting from the greater trochanter, the sinewy onset of the minimal and medium gluteal muscle is split with an arched-shaped incision, which also falls proximally in the dorsal direction. Exposition of the joint capsule, longitudinal incision and resection of the ventrolateral parts. Dislocation of the hip by a combined adduction and external rotation movement. Osteotomy of the femoral neck and resection of the femoral head are performed in a figure-of-four position without adduction. To prepare the acetabulum and to insert the cup, the leg is placed in neutral position with a slight flexion of 20° in the hip. Preparation of the femur and implantation of the stem is again performed in a figure-of-four position in adduction. Reduction of the hip and stepwise wound closure. POSTOPERATIVE MANAGEMENT: Mobilization on postoperative day 1. Starting with half weight bearing and after completed wound healing rapid increase to full weight bearing. Intensive physiotherapy and rehabilitation. Thrombosis prophylaxis according to guidelines. RESULTS: The mini-incision approach has successfully been used in our clinic for years. Between September 2004 and November 2005, the less-invasive technique was evaluated in a randomized controlled trial with 51 patients (52 hips). Compared to the standard approach a significantly shorter incision length (8.9 vs. 14.0 cm) and a slightly lower blood loss (502 vs. 660 ml) were observed for the modified mini-Hardinge. Moreover, the mini-incision group showed slightly better functional results in the early course. A higher rate of implant malpositioning or a higher peri- and postoperative complication rate was not observed.

Elevated cytokine expression of different PEEK wear particles compared to UHMWPE in vivo.

Due to their mechanical properties, there has been growing interest in poly-ether-ether-ketone (PEEK) and its composites as bearing material in total and unicompartmental knee arthroplasty. The aim of this study was to analyze the biological activity of wear particles of two different (pitch and PAN) carbon-fiber-reinforced- (CFR-) PEEK varieties in comparison to ultra-high-molecular-weight-polyethylene (UHMWPE) in vivo. The authors hypothesized no difference between the used biomaterials. Wear particle suspensions of the particulate biomaterials were injected into knee joints of Balb/c mice, which were sacrificed after seven days. The cytokine expression (IL-1ß, IL-6, TNF-α) was analyzed immunohistochemically in the synovial layer, the adjacent bone marrow and the articular cartilage. Especially in the bone marrow of the two CFR-PEEK varieties there were increased cytokine expressions compared to the control and UHMWPE group. Furthermore, in the articular cartilage the CFR-PEEK pitch group showed an enhanced cytokine expression, which could be a negative predictor for the use in unicondylar knee systems. As these data suggest an increased proinflammatory potential of CFR-PEEK and its composites in vivo, the initial hypothesis had to be refuted. Summarizing these results, CFR-PEEK seems not to be an attractive alternative to UHMWPE as a bearing material, especially in unicompartmental knee arthroplasty.

Comparison of tenocytes and mesenchymal stem cells seeded on biodegradable scaffolds in a full-size tendon defect model.

In order to investigate cell-based tendon regeneration, a tendon rupture was simulated by utilizing a critical full-size model in female rat achilles tendons. For bridging the defect, polyglycol acid (PGA) and collagen type I scaffolds were used and fixed with a frame suture to ensure postoperatively a functional continuity. Scaffolds were seeded with mesenchymal stem cells (MSC) or tenocytes derived from male animals, while control groups were left without cells. After a healing period of 16 weeks, biomechanical, PCR, histologic, and electron microscopic analyses of the regenerates were performed. Genomic PCR for male-specific gene was used to detect transplanted cells in the regenerates. After 16 weeks, central ossification and tendon-like tissue in the superficial tendon layers were observed in all study groups. Biomechanical test showed that samples loaded with tenocytes had significantly better failure strength/cross-section ratio (P < 0.01) compared to MSC and the control groups whereas maximum failure strength was similar in all groups. Thus, we concluded that the application of tenocytes improves the outcome in this model concerning the grade of ossification and the mechanical properties in comparison to the use of MSC or just scaffold materials.

Is there a benefit to a routine preoperative screening of infectivity for HIV, hepatitis B and C virus before elective orthopaedic operations?

PURPOSE: Before elective operations, particularly orthopaedic surgery, national guidelines in Germany recommend testing for human immunodeficiency virus (HIV), hepatitis B virus (HBV), and hepatitis C virus (HCV) to reduce the risk of transmission of the virus through a needlestick or cutting injury. Such testing is expensive. The number of new and unknown diagnoses of viral infections that can be detected by routine screening has not yet been evaluated. METHODS: The aim of our department of orthopaedic surgery is to screen every adult patient listed for an operation for HBV, HCV and HIV. We retrospectively analysed the number of operations in this single centre from 2001 to 2010, correlated this number with the total number of screens and calculated the number of newly diagnosed infections. An additional cost:benefit ratio was calculated. RESULTS: A total of 20,869 operations were performed by the department between 2001 and 2010. After exclusion of all interventions in children and all patients who had multiple operations, 15,482 patients remained. Test results were found for 10,011 of these patients during this period (screening rate 65 %). Of those screened, in only four cases (0.4 ‰) was a previously unknown infection detected. CONCLUSIONS: Two-thirds of the patients included in our study actually underwent screening; this rate was lower than expected. The incidence of newly detected infections was low, putting the benefit of a routine preoperative screening for HBV, HCV and HIV into question. From an economic point of view the low detection rate is a strong argument in favour of omitting routine preoperative screening. Screening only those patients with risk factors may be as safe as screening every patient and would help reduce costs.

Development and validation of a new method for the radiologic measurement of the tibial slope.

PURPOSE: The posterior tibial slope has a huge influence on the kinematics of the knee. In several orthopedic interventions such as high tibial osteotomy and unicondylar or bicondylar knee replacement changing, the tibial slope can result in altered knee mechanics. Therefore, an exact preoperative measurement of the posterior tibial slope is mandatory. Several methods are used on conventional radiographs and CT scans, but until now there is no standard validated method. The aim of this study was to compare several methods and imaging techniques to measure the posterior tibial slope and to establish a standard and reliable measurement method by radiography. METHODS: Fourteen knees (seven cadavers) were scanned by a 64-slice CT, a 3T-MRI, and true lateral radiographs were performed. The anatomical references (TPAA = tibial proximal anatomical axis; ATC = anterior tibial cortex; PTC = posterior tibial cortex) and the new computed reference (MPA = mean of PTA and ATC) were compared by short as well as long radiographs, CT scan and MRI. The influence of a malrotation in radiographs of the knees was also analyzed. RESULTS: CT scan and MRI are suitable for the measurement of the medial and lateral posterior tibial slopes, the results of the radiographs varied depending on the method used. The new method (MPA) showed the best correlation to the CT scan (r = 0.997), even on short radiographs (10 cm distal the joint line). CONCLUSION: The measurement of the posterior tibial slope on a short lateral radiograph using the MPA is a reliable method and should be established as a standard. LEVEL OF EVIDENCE: Diagnostic study, Level II.

Crosslinked polyethylene in knee arthroplasty: a simulator study evaluating the positive influence on the tribocontact area in the fixed-bearing knee.

BACKGROUND: Crosslinked polyethylene (XPE) was developed to reduce the wear rate in hip as well as knee arthroplasty. The crosslinking process reduces the mechanical properties of ultra-high-molecular-weight polyethylene (UHMWPE), particularly its fatigue strength. UHMWPE fatigue occurs more frequently in the knee than in the hip joint due to its changing tribocontact areas (TCAs) combined with high weight bearing. This is why XPE is still controversially discussed for use in total knee arthroplasty. Therefore, the potential advantage of using XPE in the knee was analysed in a simulator study with a focus on potential fatigue wear mechanisms. METHODS: Three different kinds of XPE and one conventional UHMWPE were tested over 5 million cycles in fixed-bearing knee designs. The TCAs were examined by replicas, and their extent was measured. The wear mechanism was analysed by scanning electron microscopy. RESULTS: The extent of the TCAs was less than 5% for all XPEs, whereas 35% for the conventional UHMWPE. Fatigue wear mechanisms were not observed. CONCLUSION: The measured small extent of the TCAs as a predictor of a low wear rate without any fatigue wear mechanism shows a possible advantage for the use of XPE even in knee arthroplasty.

Shock wave therapy for femoral head necrosis-Pressure measurements inside the femoral head.

There is a persisting need for effective therapies of femoral head necrosis, a common bone disease. Promising clinical results have been stated for the treatment with extracorporeal shock waves (ESW). However, the effective remaining pressure in the target region inside the femoral head has never been determined. Aim of this study was to investigate whether ESW are able to propagate through bone without an excessive loss of pressure. The remaining ESW pressure generated by an electromagnetic device after passing a certain intraosseous distance within the femoral head was measured. Standardized holes were drilled in porcine femora and the absorption in relation to reference measurements in degassed water was determined. The results showed continuous attenuation of shock waves in bone. After a clinical relevant intraosseous distance of 10 mm an ESW pressure of approximately 50% remained. In conclusion, ESW have the potential to reach necrotic regions with therapeutic pressure levels and to effectively treat femoral head necrosis.

The influence of adjuvants on local recurrence rate in giant cell tumour of the bone.

INTRODUCTION: Intralesional surgery of giant cell tumour of the bone (GCT) may result in a high rate of local recurrence. The introduction of local adjuvants, such as cementation, cryosurgery or phenolization, has proved to be successful in the reduction of recurrence rates. This study presents the results of a single institution in surgery of GCT with an evolution in treatment strategies. MATERIAL & METHODS: Forty primary and 25 recurrent surgical procedures in 46 patients with GCT of the bone with a median follow-up of 72 months were reviewed retrospectively. The mean age was 32.6 years (range 13.6-57.9 years). Forty-seven curettages and 18 resections were performed. For the curettages, a large bone window was cut followed by high speed burring and bone grafting or cementation. In 34 of 47 curettages and 7 of 18 resections, phenol was additionally applied. RESULTS: Two patients showed pulmonary metastasis, one died due to metastatic disease. In total, a third of the patients developed local recurrence (32.3%). This was evenly spread among primary and recurrent diesease (32.5% vs. 32%). Seven of 13 curettages without adjuvant recurred (53.9%), compared to 11 of 34 curettages with adjuvant phenol (32.4%). Three of 18 resections developed a recurrence (16.7%). No complications in respect to the use of phenol were seen. DISCUSSION: Phenolization is a safe local adjuvant therapy for GCT. Although the recurrence rate was lower with the use of phenol, this drop was not significant. The comparable high recurrence rate in our study, even if phenol was used, might be due to the fact that curettage was our favoured treatment, even in cases with an extensive juxta-articular tumour. We recommend adjuvant phenolization in the treatment of GCT of the bone after thorough curettage in applicable cases, including where cementation is used for defect filling.

[Prognosis-adapted surgical management of bone metastases]. / Prognoseadaptierte operative Behandlung von Knochenmetastasen.

Surgery in metastatic disease to the bone is the most common procedure in orthopaedic oncology. To assess an adequate therapeutic approach we analysed 513 surgeries performed on 453 patients between 1980 and 2005 and reviewed the literature.The most significant factor is the histology of the primary tumour. A biopsy is mandatory to confirm the diagnosis in an unknown primary tumour, especially in cases of solitary lesions. Pulmonary carcinoma has an unfavourable prognosis compared to breast and renal cell carcinoma patients. Radical resection in isolated metastatic disease in renal cell carcinoma reduces the risk of local recurrence and even may result in a long progression-free survival. In breast cancer osseous and visceral dissemination is the most decisive factor for prognosis. An interdisciplinary approach is mandatory in every patient.

Free bone cement fragments after minimally invasive unicompartmental knee arthroplasty: an underappreciated problem.

The minimally invasive implantation of unicompartmental knee arthroplasty (UKA) leads to excellent functional results, but due to the reduced intraoperative visibility the removal of excessive cement may be difficult. In a retrospective study we assessed radiologically the incidence of loose and excess bone cement in 120 UKAs and correlated it to the thickness of the tibial cement layer. In 25 cases loose or attached excess cement was seen. Two of these patients with loose cement bodies required revision surgery. An additional 2 patients not operated at our institution required revision because of pain and loss of motion. The average thickness of the tibial cement layer was 3.1 (1.7-5.0) mm in all the patients. But it was significantly higher in the group with excess cement bodies [3.3 (2.3-5.0) mm] compared to the group without excess cement [3.0 (1.7-4.1) mm] (P < 0.05). Symptomatic free cement bodies need to be removed immediately, if necessary arthroscopically, in order to avoid damage to the implants. To avoid this problem in minimally invasive UKA, intraoperative fluoroscopy, a dental mirror or a nerve hook seem to be useful tools to identify and remove loose or excess cement.

Timing of cervical spine stabilisation and outcome in patients with rheumatoid arthritis.

One complication of rheumatoid arthritis (RA) is the involvement of the cervical spine (CS). Although prophylactic stabilisation is recommended, the timing at which this should occur is poorly defined. The aim of our study was to evaluate the course of neurological symptoms in terms of the timing of surgery. A total of 34 patients with RA and CS involvement were surgically stabilised. These patients were classified using the Ranawat (RW) score both preoperatively and at an average of 54 months post-operatively. For each patient, the presence of atlantoaxial and subaxial subluxation as well as vertical migration of the odontoid was recorded. The anterior atlantodental interval was also assessed pre- and post-operatively. Improvement was obtained in 20 patients, the clinical situation remained unchanged in three patients and three patients manifested disease progression. In terms of the RW score, the 16 patients with pre-operative RW grades I-II showed no deterioration at the post-operative follow-up, with 13 of these patients showing an improvement; the 12 patients with pre-operative RW grades IIIA-IIIB did not show any improvement of neurological symptoms at follow-up, although seven of these patients subjectively assessed the symptoms to be less severe after surgery; three other patients showed a worsening of symptoms. Our results suggest that preventive stabilisation of CS in RA leads to acceptable results, although the complications of the surgery are obvious. However, early operative treatment may delay the detrimental course of cervical myelopathy in RA.

[Atypical course in Stickler syndrome]. / Ungewöhnlicher Verlauf eines Stickler-Syndroms.

We report about a 12-year-old boy with a Stickler syndrome. Because of osteonecrosis in the femoral head in MRI the initial diagnosis was dysplasia epiphysealis capitis femoris. The patient developed a progressive stiffness of the hip and a retinal detachment. A molecular investigation showed a Stickler syndrome. Stickler syndrome is an autosomal dominant hereditary disease. It has a very low incidence and a rare association with hip disease. Usually the patients suffer from hypermobility. In our case the course was atypical and diagnosis delayed.