Polyphenol improve the foaming properties of soybean isolate protein: Structural, physicochemical property changes and application in angel cake.

With the increasing demand for food foaming, how to enhance the foaming properties of protein has gradually become the research focus. This work studied the effect of synephrine (SY) on foaming properties, structure properties, and physicochemical properties of soybean protein isolate (SPI). When the mass ratio of SY to SPI was 1:2, compared with SPI alone, the foam capacity and foam stability of the SY-SPI complex were significantly enhanced. Optical microscopy and confocal laser scanning microscope showed that the improvement in foaming performance was mainly due to the reduction of bubble size and uniform protein distribution. Circular dichroism spectrum and fluorescence spectra indicated that the hydrogen bond of SPI was destroyed and blue shifted with the addition of SY. What's more, the absolute value of Zeta potential, solubility, and hydrophobicity all increased, while the particle size decreased. As a result of molecular docking, surface hydrogen bonds, Van der Waals forces and hydrophobic interactions are the main driving forces. The addition of SY and SPI improved the specific volume and texture of angel cake. This study shows that SY has the potential to be developed into a new type of blowing agent.

Enhancing the properties of soy protein isolate and dialdehyde starch films for food packaging applications through tannic acid crosslinking.

The utilization of naturally derived biodegradable polymers, including proteins, polysaccharides, and polyphenols, holds significant promise in addressing environmental concerns and reducing reliance on nonrenewable resources. This study aimed to develop films with enhanced UV resistance and antibacterial capabilities by covalently cross-linking soy protein isolate (SPI) with dialdehyde starch (DAS) through the incorporation of tannic acid (TA). The covalent crosslinking of TA with DAS and SPI was shown to establish a stable chemical cross-linking network. The tensile strength of the resulting SPI/DAS/15TA film exhibited a remarkable increase of 208.27 % compared to SPI alone and 52.99 % compared to SPI/DAS film. Notably, the UV absorption range of SPI/DAS/10TA films extended from 200 nm to 389 nm. This augmentation can be attributed to the oxidation of TA's phenolic hydroxyl groups to quinone under alkaline conditions, which then facilitated cross-linking with the SPI chain via Michael addition and Schiff base reactions. Furthermore, the film demonstrated robust antibacterial properties due to the incorporation of TA. Collectively, the observed properties highlight the significant potential of the SPI/DAS/10TA film for applications in food packaging, where its enhanced mechanical strength, UV resistance, and antibacterial characteristics can contribute to improved product preservation and safety.

Blue honeysuckle seeds and seed oil: Composition, physicochemical properties, fatty acid profile, volatile components, and antioxidant capacity.

Blue honeysuckle seeds are often overlooked by the processing industry, but they are a good source of healthy oil. The composition, volatiles, and antioxidant capacity of blue honeysuckle seeds and seed oil were investigated for the first time. The fatty acid profile of the seed oil was analysed using GC-MS. The seed oil was particularly rich in polyunsaturated fatty acid, especially linoleic acid (71.24 ± 1.64 %). HS-SPME-GC-MS analysis temporarily detected 34 and 37 volatiles in the seeds and seed oil, respectively. Notably, aldehydes were identified as the major contributors to the aroma. The phytosterols, tocopherols, and triglycerides were identified in the seed oil. Interestingly, the total phenolic content and antioxidant capacity of the seeds were found to be much higher than the seed oil. This study evaluates the nutritional profile and value of blue honeysuckle seed oil, and suggests that it can be used as new functional oil.

Self-assembly and aggregation behavior of temperature-controlled modified glycinin and d-galactose colloidal particles.

The molecular structure and morphologies of complex colloidal particles with modified glycine (S-11S) and d-galactose were studied by multispectral, microscopic imaging and chromatographic techniques at different temperatures, and the self-assembly and aggregation mechanisms were determined. Overall, high-temperature-treated S-11S and d-galactose associate at cysteine and phenylalanine sites and self-assemble into colloidal particles of greater stability than glycinin and S-11S via ionic and disulfide bonds. The structure and subunit content of composite colloidal particles were changed. Assessing the sub-microstructure reveals that temperature can regulate the directional aggregation of complex colloidal particles. The elasticity of the complex colloidal particles is maximum enhanced at 95 ℃ as confirmed by the rheological. Thus, the heat-treated aggregation of the soy protein and its complex was evaluated to provide a new theoretical basis for the application of soy protein in gels and other areas and contribute to the design of new soy protein products.

Curcumin-loaded oil body emulsions prepared by an ultrasonic and pH-driven method: Fundamental properties, stability, and digestion characteristics.

In this study, oil bodies (OBs) loaded with curcumin (Cur) were successfully prepared via an ultrasonic and pH-driven method. Ultrasonic treatment significantly improved the encapsulation efficiency (EE) and loading capacity (LC) of Cur, producing OB particles with small size, uniform distribution, and high ζ-potential absolute values. When the ultrasonic power was 200 W, the EE, LC, and ζ-potential absolute value were the greatest (88.27 %, 0.044 %, and -25.71 mV, respectively), and the OBs possessed the highest yellowness, representing the best treatment result. The confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM) results was also intuitionally shown that. Moreover, circular dichroism (CD) proved that ultrasonic treatment could unfold the surface protein structure, further enhancing the stability. Therefore, the cream index (CI), peroxide value (POV), and thiobarbituric acid reactive substances (TBARS) were the lowest when the ultrasonic power was 200 W. In this case, the Cur loaded in OBs was well protected against hostile conditions, evidenced by the highest Cur retention rate and the lowest degradation rate constant. Finally, the in vitro gastrointestinal digestion simulation results showed that the ultrasonic treatment effectively increased the release of FFA, bioaccessibility, and stability of Cur, especially when the ultrasonic power was 200 W. This research offers a new OB-based delivery system to stabilize, deliver, and protect Cur for food processing.

Improvement of emulsifying stability of coconut globulin by noncovalent interactions with coffee polyphenols.

Coconut milk is an unstable emulsion system, mainly stabilized by proteins, which limits the development of the food industry. The aim of this study was to investigate mechanisms for increasing emulsion stability through the interaction between coffee polyphenols (CPs) and coconut globulin (CG), the main protein in coconut milk. Caffeic acid (CA), chlorogenic acid (CHA), and ferulic acid (FA) were selected as CP models. The results showed that hydrogen bond interactions mainly occurred between CG and CPs (CG-FA < CG-CA < CG-CHA). CHA containing quinic acid preferentially formed a strong interaction with CG. The interaction changed the lipophilicity of CG and facilitated the formation of a dense and thick interfacial film at the oil-water interface. Furthermore, the emulsion stabilized by CG-CPs showed excellent stability after storage, centrifugation, pH, and salt treatment, especially CG-CHA. This study could provide a theoretical basis for improving the stability of coconut milk products.

Multi-dimensional analysis of heat-induced soybean protein hydrolysate gels subjected to ultrasound-assisted pH pretreatment.

This study aimed to evaluate the gelation characteristics of soybean protein hydrolysate (SPH) extracted by enzyme-assisted aqueous extraction. Specifically, the changes in gelation behaviors for heat-induced (95 °C, 20 min) SPH dispersions treated with pH (pH 3, 5, 9; pH 7 as control) and ultrasound (U; 240 W, 30 min) were investigated. The results showed that typical gel behavior with high elastic nature in the viscoelasticity and network structures were observed during the heating process, where the disulfide bond played a dominant role in the gel network formation of all the samples. Notably, the heat-induced aggregation in the SPH gels was mainly formed by the association of the basic B polypeptide in 11S and ß subunit in 7S. The most superior SPH gel was formed at pH 7 when assisted by ultrasonication during the heating process. This as-synthesized gel showed a uniform filamentous structure and exhibited the more excellent textural, rheological and thermal properties than those of the samples formed under acidic and alkaline conditions. These results are of great value in revealing the gelation mechanism of SPH.

Further evaluation on structural and antioxidant capacities of soy protein isolate under multiple freeze-thaw cycles.

Multiple freeze-thaw (F-T) treatments could change a protein structure and affect its physicochemical activities. In this work, soy protein isolate (SPI) was subjected to multiple F-T treatments, and the changes in its physicochemical and functional properties were investigated. The three-dimensional fluorescence spectroscopy indicated that F-T treatments changed the structure of SPI, including an increase in surface hydrophobicity. Fourier transform infrared spectroscopy showed that SPI underwent denaturation, unfolding and aggregation due to the interchange of sulfhydryl-disulfide bonds and the exposure of hydrophobic groups. Correspondingly, the particle size of SPI increased significantly and the protein precipitation rate also increased from 16.69%/25.33% to 52.52%/55.79% after nine F-T treatments. The F-T treated SPI had a higher antioxidant capacity. Results indicate that F-T treatments may be used as a strategy to ameliorate preparation methods and improve functional characteristics of SPI, and suggest that multiple F-T treatment is an alternative way to recover soy proteins.

Soybean-Oil-Body-Substituted Low-Fat Ice Cream with Different Homogenization Pressure, Pasteurization Condition, and Process Sequence: Physicochemical Properties, Texture, and Storage Stability.

The purpose of this research was to explore the impacts of different homogenization pressures, pasteurization conditions, and process sequence on the physical and chemical properties of soybean oil body (SOB)-substituted low-fat ice cream as well as the storage stability of SOB-substituted ice cream under these process parameters. With the increase of homogenization pressure (10-30 MPa), the increase of pasteurization temperature (65 °C for 30 min-85 °C for 15 min), and the addition of SOB before homogenization, the overrun and apparent viscosity of ice cream increased significantly, and the particle size, hardness, and melting rate decreased significantly. Thus, frozen dairy products of desired quality and condition could be obtained by optimizing process parameters. In addition, the SOB ice cream showed better storage stability, which was reflected in lower melting rate and hardness and more stable microstructure compared with the full-milk-fat ice cream. This study opened up new ideas for the application of SOB and the development of nutritious and healthy ice cream. Meanwhile, this research supplied a conceptual basis for the processing and quality optimization of SOB ice cream.

Physicochemical Properties, Stability and Texture of Soybean-Oil-Body-Substituted Low-Fat Mayonnaise: Effects of Thickeners and Storage Temperatures.

With the increasing consumer demand for low-fat and low-cholesterol foods, low-fat mayonnaise prepared from soybean oil body (SOB) substitute for egg yolk has great consumption potential. However, based on previous studies, it was found that the stability and sensory properties of mayonnaise substituted with SOB were affected due to there being less lecithin and SOB containing more water. Therefore, this study investigated the effects of different ratios of xanthan gum, pectin and modified starch as stabilizers on the apparent viscosity, stability, texture and microstructure of SOB-substituted mayonnaise. It was found that the apparent viscosity and stability of SOB-substituted mayonnaise increased significantly when xanthan gum, pectin and modified starch were added in a ratio of 2:1:1. Meanwhile, the emulsified oil droplets of SOB-substituted mayonnaise were similar in size and uniformly dispersed in the emulsion system with different thickener formulations. In addition, the storage stability of SOB-substituted mayonnaise was explored. Compared with full egg yolk mayonnaise, SOB-substituted mayonnaise had better oxidative stability and bacteriostatic, which is important for the storage of mayonnaise. This study provided a theoretical basis for the food industry application of SOB. Meanwhile, this study provided new ideas for the development and storage of low-fat mayonnaise.

Effects of Soybean Oil Body as a Milk Fat Substitute on Ice Cream: Physicochemical, Sensory and Digestive Properties.

Soybean oil body (SOB) has potential as a milk fat substitute due to its ideal emulsification, stability and potential biological activity. In this study, SOB was used as a milk fat substitute to prepare ice cream, expecting to reduce the content of saturated fatty acid and improve the quality defects of ice cream products caused by the poor stability of milk fat at low temperatures. This study investigated the effect of SOB as a milk fat substitute (the substitution amount was 10-50%) on ice cream through apparent viscosity, particle size, overrun, melting, texture, sensory and digestive properties. The results show SOB substitution for milk fat significantly increased the apparent viscosity and droplet uniformity and decreased the particle size of the ice cream mixes, indicating that there were lots of intermolecular interactions to improve ice cream stability. In addition, ice cream with 30% to 50% SOB substitution had better melting properties and texture characteristics. The ice cream with 40% SOB substitution had the highest overall acceptability. Furthermore, SOB substitution for milk fat increased unsaturated fatty acid content in ice cream and fatty acid release during digestion, which had potential health benefits for consumers. Therefore, SOB as a milk fat substitute may be an effective way to improve the nutritional value and quality characteristics of dairy products.

Oil bodies extracted from high-oil soybeans (Glycine max) exhibited higher oxidative and physical stability than oil bodies from high-protein soybeans.

Reports concerning the characteristics of soybean oil bodies (SOBs) isolated from high protein genotypes and high oil genotypes of soybeans available in the literature are insufficient and limiting. In this study, fatty acid compositions, total phenol and tocopherol contents, antioxidant capacity, and physicochemical stability of SOB emulsions recovered from three high-protein and three high-oil genotype soybeans were comparatively investigated. Principal component analysis showed that all six SOB samples could be easily discriminated based on the cultivar characteristics. Overall, the SOBs derived from the high-protein soybeans exhibited higher polyunsaturated fatty acid (PUFA) contents, while the SOBs derived from the high-oil soybeans had higher extraction yields and tocopherol contents; the tocopherol content was also positively correlated with the antioxidant capacity of the lipophilic fraction, but the difference in the total phenolic content between the two genotypes was not significant. The SOBs derived from the high-protein soybeans were more easily oxidized during storage, with 1.38- and 4-fold higher accumulation rates of lipid hydroperoxides (LPO) and thiobarbituric acid reactive substances (TBARS), respectively, in the high-protein-derived SOBs than in the high-oil-derived SOBs. In addition, the SOBs from the high-protein soybeans exhibited pronounced coalescence during storage, which was corroborated by focused confocal microscopy. These results confirmed that SOBs obtained from high-oil soybean genotypes are more suitable to manufacture OB-based products due to their superior physicochemical stability.

Non-covalent interaction of soy protein isolate and catechin: Mechanism and effects on protein conformation.

Understanding the molecular mechanism behind protein-polyphenol interactions is critical for the application of protein-polyphenol compounds in foods. The purpose of this research was to investigate the non-covalent interaction mechanism between soy protein isolate (SPI) and catechin and its effect on protein conformation. We observed that particle size, ζ-potential, and polyphenol bound equivalents of SPI increased significantly after non-covalent modification with catechin. These changes caused SPI to aggregate and form a network-like structure. Fourier transform infrared spectroscopy (FTIR) indicated that increased catechin concentrations caused SPI to become looser and more disordered as its α-helix and ß-sheet transformed into ß-turn and random coil. Furthermore, internal structure of SPI was opened and its hydrophobic groups were exposed to a polar environment, which was demonstrated by decreased surface hydrophobicity. Thermodynamic analysis and molecular docking results showed that the main forces present between SPI and catechin were hydrophobic interactions and hydrogen bonds.

NaCl induces flocculation and lipid oxidation of soybean oil body emulsions recovered by neutral aqueous extraction.

BACKGROUND: Soybean oil bodies (SOB) are naturally pre-emulsified lipid droplets recovered directly from soybean seeds. Almost all food emulsions contain salts. However, it was not clear how the incorporation of salts affected the physicochemical stability of SOB. RESULTS: This study investigated the effect of NaCl (0-1.2%) on the physical and oxidative stability of SOB emulsions under neutral (pH 7) and acidic (pH 3) conditions. In the presence of NaCl, the SOB emulsion (pH 7) showed strong flocculation during storage due to electrostatic screening. The NaCl-induced flocculation of SOB was attenuated at pH 3, which may be due to the difference in conformation or interaction of the protein interfaces covering SOB at different pH values. The increase in ionic strength or acid conditioning treatment resulted in a remarkable increase in the stability of SOB emulsions against coalescence. The confocal laser scanning microscopy images also confirmed the NaCl-induced changes in the flocculation/coalescence properties of SOB. The oxidative behavior tests indicated that SOB emulsions containing NaCl were more susceptible to lipid oxidation but protein oxidation was inhibited due to electrostatic screening, which reduced pro-oxidant accessibility of unadsorbed proteins in the emulsion. This oxidative behavior was attenuated at pH 3. CONCLUSION: The incorporation of NaCl significantly reduced the physical and oxidative stability of the SOB emulsion, and acidic pH mitigated NaCl-induced flocculation and lipid oxidation of SOB. © 2021 Society of Chemical Industry.

Fabrication and characterization of ß-carotene emulsions stabilized by soy oleosin and lecithin mixtures with a composition mimicking natural soy oleosomes.

Natural soy oleosomes are known to have a remarkable stability, given the advantage of their sophisticated membrane. The aim of the present study is to examine the concept of fabricating a ß-carotene emulsion stabilized by soy oleosin (OLE) and lecithin (LEC) mixtures mimicking the membrane composition of soy oleosomes while providing preferable stability and bioaccessibility. For this, the fabricated emulsion was characterized in terms of droplet size distribution, and emulsion structure, stability and digestion (release and absorption of lipophilic ß-carotene). Compared to SPI/LEC (10 : 1) stabilized emulsions, the OLE/LEC (10 : 1) mixture stabilized emulsion exhibited the highest emulsifying activity index (EAI) and emulsifying stability index (ESI) values, and higher encapsulation efficiency. Results show that the ß-carotene emulsion stabilized by OLE and LEC mixtures at the ratio of 10 : 1 (w/w) has the most uniform droplet distribution and highest stability. The in vitro gastrointestinal digestion test revealed that the ß-carotene emulsion stabilized by OLE and LEC mixtures was digested more rapidly than the emulsion stabilized by soy protein isolate (SPI) and LEC mixtures. In turn, the bioaccessibility and cellular uptake of ß-carotene were enhanced, resulting in a higher absorption, a desirable feature of nutrition delivery systems. Our results demonstrated a promising way to fabricate emulsions mimicking natural soy oleosomes.

Effect of ultrasound on the preparation of soy protein isolate-maltodextrin embedded hemp seed oil microcapsules and the establishment of oxidation kinetics models.

In this study, microcapsules were prepared by spray drying and embedding hemp seed oil (HSO) with soy protein isolate (SPI) and maltodextrin (MD) as wall materials. The effect of ultrasonic power on the microstructure and characteristics of the composite emulsion and microcapsules was studied. Studies have shown that ultrasonic power has a significant impact on the stability of composite emulsions. The particle size of the composite emulsion after 450 W ultrasonic treatment was significantly lower than the particle size of the emulsion without the ultrasonic treatment. Through fluorescence microscopy observation, HSO was found to be successfully embedded in the wall materials to form an oil/water (O/W) composite emulsion. The spray-dried microcapsules showed a smooth spherical structure through scanning electron microscopy (SEM), and the particle size was 10.7 µm at 450 W. Fourier transform infrared (FTIR) spectroscopy analysis found that ultrasonic treatment would increase the degree of covalent bonding of the SPI-MD complex to a certain extent, thereby improving the stability and embedding effect of the microcapsules. Finally, oxidation kinetics models of HSO and HSO microcapsules were constructed and verified. The zero-order model of HSO microcapsules was found to have a higher degree of fit; after verification, the model can better reflect the quality changes of HSO microcapsules during storage.

Oil-in-water Pickering emulsion stabilization with oppositely charged polysaccharide particles: chitin nanocrystals/fucoidan complexes.

BACKGROUND: Chitin nanocrystals (ChN) are insoluble particles that can be used as stabilizers for Pickering emulsions. Their unique cationic properties and antibacterial activity have generated considerable interest among researchers. However, ChN have remained largely underexplored. Furthermore, the droplets of the emulsions stabilized by ChN are as large as 10-100 µm, and their physical stability requires further improvement. Some studies have shown that the spontaneous reaction of oppositely charged particles can effectively stabilize the emulsions. Positively charged ChN and negatively charged fucoidan (F) were therefore compounded to stabilize Pickering emulsions, and the stability of these emulsions was analyzed qualitatively. RESULTS: The results showed that the composite particles comprising two polysaccharides in a mass ratio of 1:1 and at a pH of 2 (ChN1 -F1 -pH 2) possessed the lowest sulfate content (20.1%) and almost zero potential (-3 mV), indicating a high degree of neutralization of the positively charged amino group in ChN and the negatively charged sulfate group in F. Meanwhile, ChN1 -F1 -pH 2 displayed a dense network structure that improved the dispersibility and wettability (contact angle = 9.3°). Fourier transform infrared spectroscopy results confirmed that ChN and F were effectively combined through electrostatic interaction or neutralization to produce a polyelectrolyte complex. Furthermore, the particle size of the Pickering emulsion stabilized by ChN-F was significantly reduced, and the maximum size did not exceed 10 µm; the physical and storage stability also improved. The ChN1 -F1 -pH 2 emulsion presented excellent storage stability; in particular, the emulsions stabilized by ChN1 -F1 -pH 5 and ChN1 -F1 -pH 6 exhibited excellent flocculation stabilities. CONCLUSION: The size of the emulsion droplets stabilized by the oppositely charged polysaccharide particles (ChN-F complexes) reduced significantly. Furthermore, by changing the mass ratio and pH, the microstructure and binding degree of the complexes can be adjusted, thereby promoting their adsorption on the oil-water interface and improving the stability of the Pickering emulsion. © 2020 Society of Chemical Industry.

Soy/whey protein isolates: interfacial properties and effects on the stability of oil-in-water emulsions.

BACKGROUND: The adsorption of proteins at oil/water interfaces can reduce interfacial tension and increase emulsion stability. However, emulsions stabilized by soy protein isolate (SPI) are not sufficiently stable. Using SPI as a control, a theoretical basis for the adsorption behavior of mixed SPI and whey protein isolate (WPI) at the oil/water interface was established and the effects of the protein ratio and content on the emulsion stability were studied. RESULTS: Compared to SPI solution, SPI-WPI mixed solutions were found to reduce the size distribution of emulsion droplets and significantly improve the emulsion stability. Among the studied protein contents and ratios, the protein content of 0.2 g kg-1 and SPI/WPI mass ratio of 1:9 offered the lowest creaming stability index (15%), the smallest droplet size (278 nm), and the largest absolute value ζ-potential (35 mV), i.e. the emulsion stability was excellent. The largest dilatational modulus (10.08 mN m-1 ), dilatational elasticity (10.01 mN m-1 ), and dilatational viscosity (1.18 mN m-1 ), were observed with a protein content of 0.15 g kg-1 (SPI/WPI ratio of 1:9), along with a high interfacial protein adsorption capacity (47.33%). SPI-WPI complexes form a thick adsorption layer around oil droplets, resulting in an increase of the expansion modulus of the interfacial layer. CONCLUSION: SPI-WPI complexes can form a thick adsorption layer around oil droplets, resulting in increased expansion modulus of the interfacial layer, which improves emulsion stability. © 2020 Society of Chemical Industry.

Effects of covalent modification with epigallocatechin-3-gallate on oleosin structure and ability to stabilize artificial oil body emulsions.

The purpose of this study was to enhance the stability and functional properties of artificial oil body (AOB) emulsions. Herein, we covalently conjugated oleosin (OL) and epigallocatechin-3-gallate (EGCG) under alkaline conditions to obtain OL-EGCG conjugates. The results revealed that the structural characteristics of OL are improved by covalent binding to EGCG, with the OL-EGCG yield maximized at an EGCG concentration of 150 µM. We prepared AOB emulsions using native OL, the OL-EGCG conjugates, phosphatidylcholine (PC), and soybean oil for embedding curcumin. The results show that the protein components and phospholipids are bound in the AOB emulsion by hydrogen bonding and hydrophobic interactions. The covalent OL-EGCG/PC-stabilized emulsions exhibited more uniform droplet distributions, stronger thermal stabilities, and higher curcumin retentions than the other samples. These results indicated that the OL-EGCG/PC complexes are potential stabilizers for AOB emulsions and provided fresh insight into preparing highly stable emulsion embedding systems with good encapsulation efficiencies.