Bioreactor Expansion Affects Microbial Succession of Mixotrophic Acidophiles and Bioremediation of Cadmium-Contaminated Soils.

Microbial scale-up cultivation is the first step to bioremediating cadmium (Cd)-contaminated soils at the industrial scale. However, the changes in the microbial community as the bioreactor volume expands and their associations with soil Cd removal remain unclear. Herein, a six-stage scale-up cultivation process of mixotrophic acidophiles was conducted, scaling from 0.1 L to 10 m3, to remediate Cd-contaminated soils. The findings showed that bioreactor expansion led to a delay in sulfur and glucose oxidations, resulting in a reduced decline in solution pH and cell density. There were minimal differences observed in bacterial alpha-diversity and community structure as the bioreactor volume increased, except for the 10 m3 scale. However, bioreactor expansion decreased fungal alpha-diversity, changed the community structure, and simplified fungal community compositions. At the family level, Acidithiobacillaceae and Debaryomycetaceae dominated the bacterial and fungal communities throughout the scale-up process, respectively. Correlation analysis indicated that the indirect effect of mixotrophic acidophiles played a significant role in soil Cd removal. Bacterial community shifts, driven by changes in bioreactor volume, decreased the pH value through sulfur oxidation, thereby indirectly enhancing Cd removal efficiency. This study will contribute to the potential industrial application of mixotrophic acidophiles in bioremediating Cd-contaminated soils.

Transport Behavior of Cd2+ in Highly Weathered Acidic Soils and Shaping in Soil Microbial Community Structure.

The mining and smelting site soils in South China present excessive Cd pollution. However, the transport behavior of Cd in the highly weathered acidic soil layer at the lead-zinc smelting site remains unclear. Here, under different conditions of simulated infiltration, the migration behavior of Cd2+ in acid smelting site soils at different depths was examined. The remodeling effect of Cd2+ migration behavior on microbial community structure and the dominant microorganisms in lead-zinc sites soils was analyzed using high-throughput sequencing of 16S rRNA gene amplicons. The results revealed a specific flow rate in the range of 0.3-0.5 mL/min that the convection and dispersion have no obvious effect on Cd2+ migration. The variation of packing porosity could only influence the migration behavior by changing the average pore velocity, but cannot change the adsorption efficiency of soil particles. The Cd has stronger migration capacity under the reactivation of acidic seepage fluid. However, in the alkaline solution, the physical properties of soil, especially pores, intercept the Cd compounds, further affecting their migration capacity. The acid-site soil with high content of SOM, amorphous Fe oxides, crystalline Fe/Mn/Al oxides, goethite, and hematite has stronger ability to adsorb and retain Cd2+. However, higher content of kaolinite in acidic soil will increase the potential migration of Cd2+. Besides, the migration behavior of Cd2+ results in simplified soil microbial communities. Under Cd stress, Cd-tolerant genera (Bacteroides, Sphingomonas, Bradyrhizobium, and Corynebacterium) and bacteria with both acid-Cd tolerance (WCHB 1-84) were distinguished. The Ralstonia showed a high enrichment degree in alkaline Cd2+ infiltration solution (pH 10.0). Compared to the influence of Cd2+ stress, soil pH had a stronger ability to shape the microbial community in the soil during the process of Cd2+ migration.

Effect of roxadustat on iron metabolism in patients with peritoneal dialysis: a real-world 24-week study.

BACKGROUND: Roxadustat is an oral hypoxia inducing factor-prolyl hydroxylase inhibitor (HIF-PHI) that regulates iron metabolism in patients with chronic kidney disease (CKD) primarily by reducing hepcidin levels and mobilizing internal iron stores. More data are needed to demonstrate the efficacy of roxadustat in regulating iron metabolism in patients with peritoneal dialysis (PD) compared with erythropoiesis stimulating agents (ESAs). METHODS: This prospective cohort study enrolled PD patients with a mean hemoglobin level of 60-100 g/L. All subjects were randomized into two groups at a ratio of 2:1 the roxadustat group (106 cases), and the ESA group (53 cases). The primary endpoint was the change in the iron biomarker levels and the proportion of patients with absolute iron deficiency and functional iron deficiency. RESULTS: Compared with ESAs, roxadustat significantly decreased hepcidin level (difference, - 20.09 ng/mL; 95% CI, - 30.26 to - 9.92), attenuated the increase in serum soluble transferrin receptor (sTFR) level (difference, - 7.87 nmol/L; 95% CI, - 12.11 to - 3.64), and reduced the proportion of patients with functional iron deficiency (roxadustat, 11.43%; ESA, 33.33%). There was no significant difference in safety of the two groups over the duration of the study. CONCLUSIONS: Compared with ESA group, roxadustat group showed significant differences in all iron biomarker levels except serum ferritin (sFt) and transferrin saturation (TSAT). These results suggest that roxadustat was superior to ESAs as a therapy for iron metabolism in PD patients. TRIAL REGISTRATION: This study completed Chinese Clinical Trial Registration on March 4, 2022 (registration number: ChiCTR2200057231).

Cadmium, lead and arsenic contamination in an abandoned nonferrous metal smelting site in southern China: Chemical speciation and mobility.

The investigation of chemical speciation of primary toxic metal(loid)s (Cd, Pb, and As) in soil profile in nonferrous metal smelting site is a key to the assessment of their mobility characteristics and formulation of subsequent remediation strategy. In this study, 74 soil samples were collected at 12 different soil profiles; soil physio-chemical properties and total content of Cd, Pb and As and corresponding chemical speciation were also determined. The results showed that the mean total concentration followed the order of Pb > As > Cd. A large proportion of Pb, Cd and As were accumulated in upper soil profiles (depth < 3 m). Heavy pollution of Pb, Cd and As were observed in the whole soil profile at the area of fuel oil storage tank (ZY6) and lead smelting area (ZY8). The dominant fraction of Cd was exchangeable fraction (F1); Pb was dominant in Fe/Mn oxides-bound fraction (F3) in most cases; Crystallized Fe/Al hydrous oxides bound fraction (F4) generally accounted for a large proportion of As. Mobility factor (MF) followed the order Cd > As > Pb, indicating that Cd was the most mobile element in soil profiles. Pearson correlation analysis found that MFCd was significantly positively correlated to soil silt; the F4 fraction percentage of As was significantly positively correlated to soil redox potential (Eh). Additionally, MFCd/Pb was found to be positively correlated to crystalline iron (Fec), while negatively correlated to amorphous iron (Feo). The findings reported in this study, on the basis of distribution characteristics of chemical speciation could provide a new solution for future soil remediation at the site. Long-term solutions to metal(loid)s pollution might be offered by microbial-assisted soil washing technique that promotes the transformation of Fe/Mn oxides-bound fraction and organic/sulfide-bound fraction.

Bioremediation of cadmium-contaminated paddy soil using an autotrophic and heterotrophic mixture.

Cadmium (Cd) pollution poses a serious risk to human health and ecological security. Bioremediation can be a promising and effective remediation technology for treating Cd contaminated soils. In this study, seven heterotrophic strains were isolated from Cd contaminated soil and 7 autotrophic strains were isolated from acid mine drainage. Cd removal efficiencies were compared after leaching with autotrophic bacteria (Att-sys), heterotrophic isolates (Htt-sys) and cooperative leaching systems (Co-sys) in laboratory agitating reactors. The results indicated that Cd removal efficiency of Co-sys (32.09%) was significantly higher than that of Att-sys (23.24%) and Htt-sys (0.74%). By analyzing the soil microbial community in different bioleaching systems, we found that the addition of heterotrophic isolates significantly promoted the growth of some heavy metal resistant inhabitants (Massilia, Alicyclobacillus, Micromonospora, etc.), and Co-sys had a minor effect on the growth of soil indigenous microbes. In Co-sys, the content of the four Cd fractions all decreased compared with other leaching systems. The analysis of soil physicochemical parameters during the leaching process showed that pH and ORP (oxidation reduction potential) were not the only determinants for Cd removal efficiency in Co-sys, synergistic metabolic activities of autotrophic and heterotrophic strains may be other determinants. This study demonstrated that cooperative bioremediation may prove to be a safe and efficient technique for field application in heavy metal soil pollution.

Adsorption of 17ß-estradiol from aqueous solution by raw and direct/pre/post-KOH treated lotus seedpod biochar.

Five biochars derived from lotus seedpod (LSP) were applied to examine and compare the adsorption capacity of 17ß-estradiol (E2) from aqueous solution. The effect of KOH activation and the order of activation steps on material properties were discussed. The effect of contact time, initial concentration, pH, ionic strength and humic acid on E2 adsorption were investigated in a batch adsorption process. Experimental results demonstrated that the pseudo second-order model fitted the experimental data best and that adsorption equilibrium was reached within 20 hr. The efficiency of E2 removal increased with increasing E2 concentration and decreased with the increase of ionic strength. E2 adsorption on LSP-derived biochar (BCs) was influenced little by humic acid, and slightly affected by the solution pH when its value ranged from 4.0 to 9.0, but considerably affected at pH 10.0. Low environmental temperature is favorable for E2 adsorption. Chemisorption, π-π interactions, monolayer adsorption and electrostatic interaction are the possible adsorption mechanisms. Comparative studies indicated that KOH activation and the order of activation steps had significant impacts on the material. Post-treated biochar exhibited better adsorption capacity for E2 than direct treated, pre-treated, and raw LSP biochar. Pyrolyzed biochar at higher temperature improved E2 removal. The excellent performance of BCs in removing E2 suggested that BCs have potential in E2 treatment and that the biochar directly treated by KOH would be a good choice for the treatment of E2 in aqueous solution, with its advantages of good efficiency and simple technology.

Removal of 17ß-Estradiol from water by adsorption onto montmorillonite-carbon hybrids derived from pyrolysis carbonization of carboxymethyl cellulose.

In this work, we demonstrated the preparation of the carbonized montmorillonite/carboxymethyl cellulose (MMT/CMC) hybrids and their application as an adsorbent for efficient removal of 17ß-Estradiol (ßE2). X-ray diffractometer (XRD) results showed that CMC intercalation reached saturation at a CMC to MMT weight ratio of 1; transmission electron microscope (TEM) measurements clearly revealed that carbonization caused graphenes distribute on the MMT surfaces; pyrolysis temperature at 600 °C yielded novel MMT/CMC sample of high surface areas as reflected by Brunauer-Emmett-Teller (BET) surface area. The adsorbed amount of ßE2 under various conditions decreased in the order MMT/CMC1:1(600) > MMT/CMC1:1(450) > MMT/CMC1:1(300) ∼ MMT/CMC2:1(600) ∼ MMT > MMT/CMC5:1(600). The removal of ßE2 by MMT/CMC1:1(600) occurred very quickly, and the adsorption kinetics could be well fitted by the Ritchie nth-order kinetic model; the best-fit adsorption isotherm model was Freundlich model. The MMT/CMC1:1(600) also exhibited good regeneration performance after five adsorption/desorption cycles. The experimental results also showed that the adsorption of ßE2 on the MMT/CMC1:1(600) composite could contribute to hydrophobic partitioning, π-π staking interaction, H-bond interaction, pore-filling effect and simple van der Waals interaction. This highly effective and novel adsorbent can be easily synthesized and regenerated, indicating its great potential in drinking and wastewater purification for endocrine disruptor compounds.

Spatial distribution and risk assessment of heavy metals in contaminated paddy fields - A case study in Xiangtan City, southern China.

An extensive investigation on spatial distribution and environmental risk assessment based on total content and fractions of heavy metals, as well as the cancer risk of Cd from seven adjacent contaminated paddy fields at Xiangtan City, southern China, was conducted in this study. A total of 63 soil samples were analyzed for soil physical properties and concentrations of eight heavy metals (Cd, Cr, Co, Cu, Mn, Ni, Pb, Zn). The results showed that concentrations of metals except for Cr, Mn and Ni exceeded the background values to varying degrees, and particularly, content of Cd was as 57.4-612 times higher than background values. Principal components analysis and correlation analysis revealed three groups: industry activities for Cd and Zn; natural sources mainly for Cu, Pb, Ni and Cr, with some slight anthropogenic activities for Cu and Pb accumulation; and manganese ore associated with cobalt for Co and Mn. Combined with different indices, Cd and Zn were the major contributors to the ecological risk, and cancer risk of Cd indicated an unacceptable degree in this area. Altogether, results from this study will facilitate a better understanding of metals distribution characteristics and provide a scientific basis for further comprehensive management for these paddy fields. Combination of functional microbial agent and plants promises to be a feasible and effective remediation method for cadmium pollution in the study area.

Fabrication of Stabilized Fe⁻Mn Binary Oxide Nanoparticles: Effective Adsorption of 17ß-Estradiol and Influencing Factors.

Fe⁻Mn binary oxide nanoparticles (FMBON) were reported to be high performance as adsorbent for pollutants removal from aqueous solution. However, there are still limitations in practice application due to the FMBON tend to aggregate into the micro millimeter level. In order to avoid the agglomeration of nanoparticles, this work synthesized the stabilized Fe⁻Mn binary oxide nanoparticles (CMC-FMBON) by using water-soluble carboxymethyl celluloses (CMC) as the stabilizer. The characteristics of CMC-FMBON and FMBON were measured by using Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and Zeta potential. This work systematically investigated the adsorption capacity of CMC-FMBON for 17ß-estradiol (E2) and the influences of external environmental factors on E2 removal. The results indicated that CMC-FMBON had much smaller particles, wider dispersion and larger surface area than the FMBON. CMC-FMBON showed better adsorption performance for E2 than FMBON with the maximum adsorption capacity of CMC-FMBON and FMBON were 124.10 and 98.14 mg/g at 298 K, respectively. The experimental data can be well fitted by the model of pseudo-second-order and Langmuir model. The E2 removal by CMC-FMBON was obviously dependent on pH with the maximum adsorption occurring when the pH was acidic. The removal capacity of CMC-FMBON increased when enhancing ionic strength in solution. Background electrolytes promoted slightly E2 adsorption process whereas the presence of humic acid inhibited the E2 removal. π-π interactions, hydrogen bonds, and oxidation might be responsible for E2 removal. This research suggested that the CMC-FMBON has been considered to be a cost-efficient adsorbent for removing E2 from water.

Adsorption Removal of 17ß-Estradiol from Water by Rice Straw-Derived Biochar with Special Attention to Pyrolysis Temperature and Background Chemistry.

Rice straw biochar that produced at three pyrolysis temperatures (400, 500 and 600 °C) were used to investigate the adsorption properties of 17ß-estradiol (E2). The biochar samples were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), elemental analysis and BET surface area measurements. The influences of pyrolysis temperature, E2 concentration, pH, ionic strength, background electrolyte and humic acid were studied. Kinetic and isotherm results illustrated that the adsorption process could be well described by pseudo-second-order and Freundlich models. Experimental results showed that ionic strength had less influence on the adsorption of E2 by 500 and 600 °C rice straw biochar. Further, multivalent ions had positive impact on E2 removal than monovalent ions and the influence of the pyrolysis temperature was unremarkable when background electrolyte existed in solutions. The adsorption capacity of E2 decreased with the pH ranged from 3.0 to 12.0 and the humic acid concentration from 2 to 10 mg L-1. Electrostatic attractions and π-π interaction were involved in the adsorption mechanisms. Compared to low-temperature biochar, high-temperature biochar exhibited a better adsorption capacity for E2 in aqueous solution, indicated it had a greater potential for E2 pollution control.

Adsorption of Estrogen Contaminants by Graphene Nanomaterials under Natural Organic Matter Preloading: Comparison to Carbon Nanotube, Biochar, and Activated Carbon.

Adsorption of two estrogen contaminants (17ß-estradiol and 17α-ethynyl estradiol) by graphene nanomaterials was investigated and compared to those of a multi-walled carbon nanotube (MWCNT), a single-walled carbon nanotube (SWCNT), two biochars, a powdered activated carbon (PAC), and a granular activate carbon (GAC) in ultrapure water and in the competition of natural organic matter (NOM). Graphene nanomaterials showed comparable or better adsorption ability than carbon nanotubes (CNTs), biochars (BCs), and activated carbon (ACs) under NOM preloading. The competition of NOM decreased the estrogen adsorption by all adsorbents. However, the impact of NOM on the estrogen adsorption was smaller on graphenes than CNTs, BCs, and ACs. Moreover, the hydrophobicity of estrogens also affected the uptake of estrogens. These results suggested that graphene nanomaterials could be used to removal estrogen contaminants from water as an alternative adsorbent. Nevertheless, if transferred to the environment, they would also adsorb estrogen contaminants, leading to great environmental hazards.

Hybrid Polymer Nanoarrays with Bifunctional Conductance of Ions and Electrons and Enhanced Electrochemical Interfaces.

Ion migration and electron transfer are crucial phenomena in electrochemistry and interfacial sciences, which require effective coupling and integration of separated charge pathways within medium materials. Here, in this work, we fabricated an ordered nanowire material based on hybrid polymers of polypyrrole, with electronic conductance, and perfluorosulfonic acid ionomers, with ionic conductance, via a facile one-step electrochemical route. Because of the nanoconfined effects for the different charge-transfer channels within the nanowire polymer matrix, the electronic and ionic conductivities of the hybrid polymer are surprisingly enhanced, being 26.4 and 0.096 S cm-1, respectively. Such an improvement in the formation of charge pathways also leads to an increased electrochemical capacitance through enlargement of the area of ion/electron transport boundaries, which may show great potential in the applications of supercapacitors, fuel cells, rechargeable batteries, and other electrochemical devices.

Bio-inspired Construction of Advanced Fuel Cell Cathode with Pt Anchored in Ordered Hybrid Polymer Matrix.

The significant use of platinum for catalyzing the cathodic oxygen reduction reactions (ORRs) has hampered the widespread use of polymer electrolyte membrane fuel cells (PEMFCs). The construction of well-defined electrode architecture in nanoscale with enhanced utilization and catalytic performance of Pt might be a promising approach to address such barrier. Inspired by the highly efficient catalytic processes in enzymes with active centers embedded in charge transport pathways, here we demonstrate for the first time a design that allocates platinum nanoparticles (Pt NPs) at the boundaries with dual-functions of conducting both electrons by aid of polypyrrole and protons via Nafion(®) ionomer within hierarchical nanoarrays. By mimicking enzymes functionally, an impressive ORR activity and stability is achieved. Using this brand new electrode architecture as the cathode and the anode of a PEMFC, a high mass specific power density of 5.23 W mg(-1)Pt is achieved, with remarkable durability. These improvements are ascribed to not only the electron decoration and the anchoring effects from the Nafion(®) ionomer decorated PPy substrate to the supported Pt NPs, but also the fast charge and mass transport facilitated by the electron and proton pathways within the electrode architecture.

Ionic liquids as precursors for efficient mesoporous iron-nitrogen-doped oxygen reduction electrocatalysts.

A ferrocene-based ionic liquid (Fe-IL) is used as a metal-containing feedstock with a nitrogen-enriched ionic liquid (N-IL) as a compatible nitrogen content modulator to prepare a novel type of non-precious-metal-nitrogen-carbon (M-N-C) catalysts, which feature ordered mesoporous structure consisting of uniform iron oxide nanoparticles embedded into N-enriched carbons. The catalyst Fe(10) @NOMC exhibits comparable catalytic activity but superior long-term stability to 20 wt % Pt/C for ORR with four-electron transfer pathway under alkaline conditions. Such outstanding catalytic performance is ascribed to the populated Fe (Fe3 O4 ) and N (N2) active sites with synergetic chemical coupling as well as the ordered mesoporous structure and high surface area endowed by both the versatile precursors and the synthetic strategy, which also open new avenues for the development of M-N-C catalytic materials.