Comparation of the effectiveness of conventional needle irrigation and photon-induced photoacoustic streaming with sodium hypochorite in the treatment of teeth with apical periodontitis: a randomized clinical trial.

Photon-initiated photoacoustic streaming (PIPS) with an Er: YAG laser has been introduced in root canal treatment to improve irrigation and facilitate the removal of bacteria in the root canal system. This study aimed to compare the antibacterial effectiveness of two different root canal irrigation techniques, conventional needle irrigation (CNI) and PIPS, using 1% sodium hypochlorite (NaOCl), in the treatment of teeth with apical periodontitis. Sixty patients with a total of sixty teeth affected by apical periodontitis were included in this study. The teeth underwent root canal therapy, and after mechanical instrumentation, they were randomly assigned to two groups (n = 30) based on the final irrigation protocol: CNI or PIPS with 1% NaOCl. Bacterial suspensions in the root canals were evaluated using Adenosine 5'-triphosphate (ATP) assay kit after mechanical instrumentation and after final irrigation. Then, a follow-up was conducted after 7 days. The results revealed that final irrigation significantly reduced ATP values in both the CNI and PIPS groups (P < 0.001). The ATP values after final irrigation was greater in the CNI group compared to the PIPS group (P < 0.001). After a 7-day follow-up, percussion tenderness and fistula were significantly resolved in both groups (P < 0.05). A multivariate linear regression model was used to identify the factors that influence post irrigation ATP values. The analysis demonstrated that pre-operative percussion tenderness (P = 0.006), the presence of a fistula (P < 0.001) and the method used in the final irrigation (P < 0.001) had a significant impact on the ATP value after final irrigation. These results indicate that employing PIPS with 1% NaOCl as the final irrigation protocol exhibited superior antibacterial effectiveness and has the potential to enhance clinical outcomes in the treatment of teeth afflicted with apical periodontitis.

Advances in the relationship between periodontopathogens and respiratory diseases (Review).

Periodontitis is a common chronic inflammatory and destructive disease in the mouth and is considered to be associated with systemic diseases. Accumulating evidence has suggested that periodontitis is a risk factor for pulmonary diseases such as pneumonia, chronic obstructive pulmonary disease (COPD), asthma, coronavirus disease 2019 (COVID­19) and lung cancer. The presence of common periodontal pathogens has been detected in samples from a variety of pulmonary diseases. Periodontal pathogens can be involved in lung diseases by promoting the adhesion and invasion of respiratory pathogens, regulating the apoptosis of respiratory epithelium and inducing overexpression of mucin and disrupting the balance of immune systemin respiratory epithelium cells. Additionally, measures to control plaque and maintain the health of periodontal tissue can decrease the incidence of respiratory adverse events. This evidence suggests a close association between periodontitis and pulmonary diseases. The present study aimed to review the clinical association between periodontitis and pneumonia, COPD, asthma, COVID­19 and lung cancer, and propose a possible mechanism and potential role of periodontal pathogens in linking periodontal disease and lung disease. This could provide a direction for further research on the association between periodontitis and lung disease and provide novel ideas for the clinical diagnosis and treatment management of these two diseases.

Isoliquiritin treatment of osteoporosis by promoting osteogenic differentiation and autophagy of bone marrow mesenchymal stem cells.

Osteoporosis is a chronic progressive bone disease characterized by the decreased osteogenic ability of osteoblasts coupled with increased osteoclast activity. Natural products showing promising therapeutic potential for postmenopausal osteoporosis remain underexplored. In this study, we aimed to analyze the therapeutic effects of isoliquiritin (ISL) on osteoporosis in mice and its possible mechanism of action. An ovariectomy-induced osteoporosis mouse model and bone marrow mesenchymal stem cells (BMSCs) were used to analyze the effects of ISL on bone regeneration in vivo and in vitro, respectively. Mitogen-activated protein kinase (MAPK) and autophagy inhibitors were used, to investigate whether the MAPK signaling pathway and autophagy affect the osteogenic differentiation of BMSCs. ISL significantly improved bone formation and reduced bone resorption in mouse femurs without inducing any detectable toxicity in critical organs such as the liver, kidney, brain, heart, and spleen. In vitro experiments showed that ISL enhanced the proliferation and osteogenic differentiation of BMSCs and that its osteogenic effect was attenuated by p38/extracellular regulated protein kinase (ERK) and autophagy inhibitors. Further studies showed that the inhibition of phosphorylated p38/ERK blocked ISL autophagy in BMSCs. ISL promoted the osteogenic differentiation of BMSCs through the p38/ERK-autophagy pathway and was therapeutically effective in treating osteoporosis in ovariectomized mice without any observed toxicity to vital organs. These results strongly suggest the promising potential of ISL as a safe and efficacious candidate drug for the treatment of osteoporosis.

Experts consensus on the procedure of dental operative microscope in endodontics and operative dentistry.

The dental operative microscope has been widely employed in the field of dentistry, particularly in endodontics and operative dentistry, resulting in significant advancements in the effectiveness of root canal therapy, endodontic surgery, and dental restoration. However, the improper use of this microscope continues to be common in clinical settings, primarily due to operators' insufficient understanding and proficiency in both the features and established operating procedures of this equipment. In October 2019, Professor Jingping Liang, Vice Chairman of the Society of Cariology and Endodontology, Chinese Stomatological Association, organized a consensus meeting with Chinese experts in endodontics and operative dentistry. The objective of this meeting was to establish a standard operation procedure for the dental operative microscope. Subsequently, a consensus was reached and officially issued. Over the span of about four years, the content of this consensus has been further developed and improved through practical experience.

MicroRNA-155 expression is associated with pulpitis progression by targeting SHIP1.

BACKGROUND: Pulpitis is a commonly seen oral inflammation condition in clinical practice, it can cause much pain for the patient and may induce infections in other systems. Much is still unknown for the pathogenic mechanism of pulpitis. In this work, we discovered that the expression of miR-155 was associated with dental pulpal inflammation both in vivo and in vitro. METHODS AND RESULTS: Our experiments of LPS stimulated odontoblast cell line MDPC-23 showed miR-155 could act as a positive regulator by increasing the production of pro-inflammatory cytokines IL-1ß and IL-6 during inflammatory responses, whereas knockdown of miR-155 can reverse the effects. Bioinformatics analysis demonstrated that SHIP1 is a direct target of miR-155 in odontoblasts, this result was further verified at both mRNA and protein level. Inhibition of miR-155 resulted in the downregulation of inflammation factors, while co-transfection of si-SHIP1 and miR-155 inhibitor promoted the inflammatory responses. Treatment with miR-155 mimic or si-SHIP1 up-regulated the protein level of p-PI3K and p-AKT. By contrast, miR-155 inhibitor exerted the opposite effects. miR-155 mimics could upregulate the gene expression of IL-1ß and IL-6. Co-transfection of LY294002 and miR-155 mimic attenuated the inflammatory responses. Consistent with in vitro results, miR-155-/- mice could alleviate inflammatory response, as well as decrease the activation of p-PI3K and p-AKT, whereas increase the activation of SHIP1. CONCLUSIONS: Our data revealed a novel role for miR-155 in regulation of dental pulpal inflammatory response by targeting SHIP1 through PI3K/AKT signaling pathway.

Effect of Enterococcus faecalis OG1RF on human calvarial osteoblast apoptosis.

BACKGROUND: Enterococcus faecalis is a dominant pathogen in the root canals of teeth with persistent apical periodontitis (PAP), and osteoblast apoptosis contributes to imbalanced bone remodelling in PAP. Here, we investigated the effect of E. faecalis OG1RF on apoptosis in primary human calvarial osteoblasts. Specifically, the expression of apoptosis-related genes and the role of anti-apoptotic and pro-apoptotic members of the BCL-2 family were examined. METHODS: Primary human calvarial osteoblasts were incubated with E. faecalis OG1RF at multiplicities of infection corresponding to infection time points. Flow cytometry, terminal deoxynucleotidyl transferase dUTP nick end labelling (TUNEL) assay, caspase-3/-8/-9 activity assay, polymerase chain reaction (PCR) array, and quantitative real-time PCR were used to assess osteoblast apoptosis. RESULTS: E. faecalis infection increased the number of early- and late-phase apoptotic cells and TUNEL-positive cells, decreased the mitochondrial membrane potential (ΔΨm), and activated the caspase-3/-8/-9 pathway. Moreover, of all 84 apoptosis-related genes in the PCR array, the expression of 16 genes was upregulated and that of four genes was downregulated in the infected osteoblasts. Notably, the mRNA expression of anti-apoptotic BCL2 was downregulated, whereas that of the pro-apoptotic BCL2L11, HRK, BIK, BMF, NOXA, and BECN1 and anti-apoptotic BCL2A1 was upregulated. CONCLUSIONS: E. faecalis OG1RF infection triggered apoptosis in human calvarial osteoblasts, and BCL-2 family members acted as regulators of osteoblast apoptosis. Therefore, BCL-2 family members may act as potential therapeutic targets for persistent apical periodontitis.

The antibacterial efficacy of photon-initiated photoacoustic streaming in root canals with different diameters or tapers.

BACKGROUND: In recent years, the concept of minimally invasive endodontics has been proposed, which could be described as preventing or treating diseases by preserving more dental tissue and creating minimal damage. In the process of root canal preparation, it was recommended to use instruments with a smaller taper to preserve more tooth tissue and improve the preservation rate of the affected teeth. Photon-induced photoacoustic streaming (PIPS) was a new type of laser-activated irrigation technology, which was now widely used in endodontic treatment. The purpose of this article was to evaluate the bactericidal effect of PIPS with NaOCl in root canals with different widths or tapers. METHODS: Twenty-three maxillary first molars with three independent root canals were included in this study. The mesiobuccal (MB), distobuccal (DB), and palatal (P) root canals were prepared at sizes of #10/.02, #25/.02, and #25/.06, respectively. After being incubated with a bacterial suspension for 4 weeks, the specimen were irrigated with 2% NaOCl activated by conventional needle irrigation (CNI) (n = 10) or PIPS (n = 10). Three specimen were not treated (control group). Before and after irrigation, the presence of bacteria was assessed with an adenosine 5'-triphosphate (ATP) assay kit and biofilms were assessed using confocal laser scanning microscopy and scanning electron microscopy. RESULTS: In specimen prepared using PIPS irrigation, the ATP was reduced by more than 98%. When the root canal taper was 0.02, the size #25 root canals had a higher percentage of dead bacteria than the size #10 root canals in all regions (P < 0.05) in the PIPS group. When the root canal width was #25, the 0.02 taper group had a higher percentage of dead bacteria than the 0.06 taper group in the apical region (P < 0.05), except coronal and middle regions (P > 0.05). PIPS irrigation results in a greater percentage of dead bacteria and reduction of ATP in size #10/.02 root canals than CNI in size #25/.06 root canals in three regions (P < 0.05). CONCLUSION: Increasing the width from #10 to #25 improves the bactericidal effect of PIPS in the root canal. Increasing the taper of the root canal from 0.02 to 0.06 at size #25 did not affect the bactericidal effects of PIPS. PIPS resulted in more dead bacteria in specimen with smaller tapers and root canal widths than CNI. PIPS can be used to clean the smear layer in the coronal region and open the dentin tubules. CLINICAL SIGNIFICANCE: Activation of irrigants with PIPS brought about significant bacterial reduction smaller tapers and width root canals compared to CNI, which was beneficial to prevent excessive loss of tooth tissue and conserve the structural integrity of teeth.

Drug-loading three-dimensional scaffolds based on hydroxyapatite-sodium alginate for bone regeneration.

Bone tissue engineering is a promising approach for tackling clinical challenges. Osteoprogenitor cells, osteogenic factors, and osteoinductive/osteoconductive scaffolds are employed in bone tissue engineering. However, scaffold materials remain limited due to their source, low biocompatibility, and so on. In this study, a composite hydrogel scaffold composed of hydroxyapatite (HA) and sodium alginate (SA) was manufactured using three-dimensional printing. Naringin (NG) and calcitonin-gene-related peptide (CGRP) were used as osteogenic factors in the fabrication of drug-loaded scaffolds. Investigation using animal experiments, as well as scanning electron microscopy, cell counting kit-8 testing, alkaline phosphatase staining, and alizarin red-D staining of bone marrow mesenchymal stem cell culture showed that the three scaffolds displayed similar physicochemical properties and that the HA/SA/NG and HA/SA/CGRP scaffolds displayed better osteogenesis than that of the HA/SA scaffold. Thus, the HA/SA scaffold could be a biocompatible material with potential applications in bone regeneration. Meanwhile, NG and CGRP doping could result in better and more positive proliferation and differentiation.

Efficacy of the photon-initiated photoacoustic streaming combined with different solutions on Enterococcus faecalis in the root canals.

This study aimed to evaluate the efficacy of different irrigation solutions used in photon-initiated photoacoustic streaming (PIPS) or conventional needle irrigation (CNI) for eradication of Enterococcus faecalis from artificial root canals. Altogether, 240 artificial root canal samples were included. The models were split and incubated for 2 days to allow formation of E. faecalis biofilm. The models were randomly divided into two groups (n = 120): CNI and laser-activated irrigation (LAI). Each group was divided into six subgroups according to different irrigation solutions: distilled water, 1% sodium hypochlorite (NaOCl), 2% NaOCl, 5.25% NaOCl, MTAD, and chlorhexidine, respectively. After irrigation, half of the samples (n = 10) were assessed immediately, and the other half of the samples (n = 10) were incubated for 6 hr. Bacterial suspensions were obtained from all samples before and after irrigation, and after incubation, and were quantified adenosine 5'-triphosphate (ATP) assay kit. The biofilms were examined using fluorescent microscopy and analyzed by Image Pro Plus software. Significant reduction of ATP, average fluorescence density after irrigation, and growth after incubation was obtained in LAI group than in CNI group (p < .05). LAI can improve bacteriostasis effect of 2% NaOCl (p < .05). PIPS improved the antibacterial effect of the 2% NaOCl used in root canal therapy.

Direct resin composite restoration of maxillary central incisors using a 3D-printed template: two clinical cases.

BACKGROUND: Three-dimensional (3D) printing technology is used widely in dentistry for applications including implant surgery, oral and maxillofacial surgery, orthognathic surgery, endodontics and prosthodontics. Using a 3D-printed template makes performing the repair procedure faster and more convenient. The aesthetic restoration of anterior teeth can recover facial beauty, enhance speaking and chewing functions and improve the quality of life of the patient. CASE PRESENTATION: This article describes two kinds of clinical cases including fractured teeth and dental caries. In both, a 3D-printed template was used for direct resin composite restoration of maxillary central incisors. A 3D-printed template was built using the following 3-step process: data acquisition was conducted via intra-oral scanning, virtual modeling was performed using an imaging process, and manufacturing was performed using a 3D printer. Aesthetically restoring the maxillary incisors with the assistance of the 3D-printed template achieved the anticipated results, and the patients were very satisfied with the effect. CONCLUSIONS: The direct resin composite restoration of maxillary central incisors using a 3D-printed template represents a rapid, convenient, aesthetic and functional option for treating maxillary central incisors. A 3D-printed template is therefore an acceptable and reliable alternative to traditional direct composite restoration of maxillary central incisors including fractured teeth and dental caries.

A novel method for periapical microsurgery with the aid of 3D technology: a case report.

BACKGROUND: Three-dimensional (3D) technology has gained wide acceptance in dentistry. It has been used for treatment planning and surgical guidance. This case report presented a novel treatment approach to remove cortical bone and root-end during periapical surgery with the help of Cone-Beam Computed Tomography (CBCT), Computer Aided Design (CAD) and three-dimensional (3D) printing technology. CASE PRESENTATION: A 37-year-old female patient presented with a large periapical lesion of left maxillary lateral incisor and canine was referred for microsurgical endodontic surgery. The data acquired from a preoperative diagnostic CBCT scan and an intra-oral scan was uploaded into surgical planning software and matched. A template that could be used to locate root-ends and lesion areas was virtually designed based on the data and was fabricated using a 3D printer. With the guidance of the template, the overlying cortical bone and root-end were precisely removed by utilizing a trephine with an external diameter of 4.0 mm. The patient was clinically asymptomatic at a six-month follow-up review. One year after the surgery, the lesion was healing well and no periapical radiolucency was observed on radiographic examination. CONCLUSIONS: The digitally designed directional template worked in all aspects to facilitate the periapical surgery as anticipated. The root-ends were accurately located and resected. The surgical procedure was simplified, and the treatment efficiency was improved. This technique minimized the damage and reduced iatrogenic injury.

Novel navigation technique for the endodontic treatment of a molar with pulp canal calcification and apical pathology.

Apical periodontitis, the inflammation of periapical tissue, commonly requires root canal treatment to achieve apical healing. However, if it is accompanied by pulp canal calcification, the treatment becomes complicated, and locating the root canal can be challenging. This case report describes a novel approach for treating a molar with pulp canal calcification and apical pathology. Due to the risk of perforation during treatment, a digitally printed template was used to assist in accurately locating the root canal. After six months, the patient was asymptomatic and the periradicular radiolucency was gradually reducing in size.

Influence of thermocycling on shear bond strength of glass ionomer cement to Er:YAG laser-prepared enamel.

PURPOSE: To evaluate the long-term influence of the shear bond strength (SBS) on glass-ionomer cement (GIC) to Er:YAG-irradiated and bur-prepared enamel. MATERIALS AND METHODS: One hundred and ninety human premolar and molars were selected and the crowns were sectioned. Samples were divided into five groups, according to surface treatments: bur preparation (B); bur preparation, etching with 37% phosphoric acid (BA); laser preparation (L); laser preparation, etching with 37% phosphoric acid (LA); laser preparation, twice irradiating with laser at low (150 mJ, 10 Hz; water spray 10 ml/min) (LL). Samples were subdivided according to the number of thermo-cycles (TCs)-500 TCs, 1,000 TCs, 3,000 TCs, and 5,000 TCs. The SBS between GIC and enamel was measured using a universal testing machine; failure patterns were analyzed with stereomicroscope. The enamel surfaces and the patterns of the junction between GIC and enamel were observed by scanning electronic microscopy (SEM). RESULTS: The SBS of L group was higher than that for the B group (P < 0.05). The failure mode analysis demonstrated a cohesive failure within the cement in BA and LA groups, but the SBS of LA group was higher than that for the BA group (P < 0.05). LL had a similar effect on SBS compared with LA. Thirty-seven percent phosphoric acid had greatly increased SBS of GIC to enamel (P < 0.05). The SBS was significantly affected by thermocycling (TC) (P < 0.05). CONCLUSION: Our results showed that Er:YAG irradiated significantly increased the SBS on GIC to enamel than bur-prepared enamel. In addition, 37% phosphoric acid pretreated also significantly increased the SBS on GIC to enamel. However, the results of these in vitro tests were limited, and extrapolation to the clinical situation was difficult. Thus, further studies were needed on this subject to simulate the highly complex and dynamic environment in the analysis. Lasers Surg. Med. 48:978-984, 2016. © 2015 Wiley Periodicals, Inc.