Region-Specific Phosphorylation Determines Neuroligin-3 Localization to Excitatory Versus Inhibitory Synapses.

BACKGROUND: Neuroligin-3 is a postsynaptic adhesion molecule involved in synapse development and function. It is implicated in rare, monogenic forms of autism, and its shedding is critical to the tumor microenvironment of gliomas. While other members of the neuroligin family exhibit synapse-type specificity in localization and function through distinct interactions with postsynaptic scaffold proteins, the specificity of neuroligin-3 synaptic localization remains largely unknown. METHODS: We investigated the synaptic localization of neuroligin-3 across regions in mouse and human brain samples after validating antibody specificity in knockout animals. We raised a phospho-specific neuroligin antibody and used phosphoproteomics, cell-based assays, and in utero CRISPR/Cas9 (clustered regularly interspaced short palindromic repeats/Cas9) knockout and gene replacement to identify mechanisms that regulate neuroligin-3 localization to distinct synapse types. RESULTS: Neuroligin-3 exhibits region-dependent synapse specificity, largely localizing to excitatory synapses in cortical regions and inhibitory synapses in subcortical regions of the brain in both mice and humans. We identified specific phosphorylation of cortical neuroligin-3 at a key binding site for recruitment to inhibitory synapses, while subcortical neuroligin-3 remained unphosphorylated. In vitro, phosphomimetic mutation of that site disrupted neuroligin-3 association with the inhibitory postsynaptic scaffolding protein gephyrin. In vivo, phosphomimetic mutants of neuroligin-3 localized to excitatory postsynapses, while phospho-null mutants localized to inhibitory postsynapses. CONCLUSIONS: These data reveal an unexpected region-specific pattern of neuroligin-3 synapse specificity, as well as a phosphorylation-dependent mechanism that regulates its recruitment to either excitatory or inhibitory synapses. These findings add to our understanding of how neuroligin-3 is involved in conditions that may affect the balance of excitation and inhibition.

A computational multilayer model to simulate hollow needle insertion into biological porcine liver tissue.

Modelling of needle insertion in soft tissue has developed significant interest in recent years due to its application in robot-assisted minimally invasive surgeries such as biopsies and brachytherapy. However, this type of surgery requires real-time feedback and processing which complex computational models may not be able to provide. In contrast to the existing mechanics-based kinetic models, a simple multilayer tissue model using a Coupled Eulerian Lagrangian based Finite Element method has been developed using the dynamic principle. The model simulates the needle motion for flexible hollow bevel-angled needle (15° and 30°, 22 Gauge) insertion into porcine liver tissue, which includes material parameters obtained from unconfined compression testing of porcine liver tissue. To validate simulation results, needle insertion force and cutting force within porcine liver tissue were compared with corresponding experimental results obtained from a custom-built needle insertion system. For the 15° and 30° bevel-angle needles, the percentage error for cutting force (mean) of each needle compared to computational model, were 18.7% and 11.9% respectively. Varying the needle bevel angle from 30° to 15° results in an increase of the cutting force, but insertion force does not vary among the tested bevel angles. The validation of this computationally efficient multilayer Finite Element model can help engineers to better understand the biomechanical behaviour of medical needle inside soft biological tissue. Ultimately, this multilayer approach can help advance state-of-art clinical applications such as robot-assisted surgery that requires real-time feedback and processing. STATEMENT OF SIGNIFICANCE: The significance of the work is in confirming the effectiveness of multilayer material based finite element (FE) method to model biopsy needle insertion into soft biological porcine liver tissue. A multilayer Coupled Eulerian Lagrangian (CEL) based FE modelling technique allowed testing of heterogeneous, non-linear viscoelastic porcine liver tissue in a system, so direct comparison of needle tissue interaction forces on the intrinsic material (tissue) behaviour could be made. To the best of the authors' knowledge, the present research investigates for the first time modelling of a three dimensional (3D) hollow needle insertion using a multilayer stiffness model of biological tissue using FE based CEL method and presents a comparison of simulation results with experimental data.

Vaginal Myomectomy and Total Vaginal Hysterectomy on Large Prolapsed Cervical Myoma: A Case Report.

Cervical myomas are benign tumors originating from cervical muscle tissue with a very rare incidence of only about 8% of all myomas. The surgical approach depends on the position of cervical myoma. This case report discusses a 44-year-old woman who complained of a lump discharge from her birth canal 6 months ago, and currently discharging from her vagina. We performed vaginal myomectomy, and the cervical myoma measuring 8 × 8 × 6 cm with solid consistency was removed. We continued with total vaginal hysterectomy. Post-operative recovery was progressing well. The histopathology report was consistent with leiomyoma. Large prolapsed cervical myoma can be disturbing and discomforting for many patients. It is relatively rare and can be successfully removed vaginally with minimal morbidity.

Bevel angle study of flexible hollow needle insertion into biological mimetic soft-gel: Simulation and experimental validation.

BACKGROUND: A thorough understanding of cutting-edge geometry and cutting forces of hollow biopsy needles are required to optimise needle tip design to improve fine needle aspiration procedures. OBJECTIVES: To incorporate the dynamics of needle motion in a model for flexible hollow bevel tipped needle insertion into a biological mimetic soft-gel using parameters obtained from experimental work. Additionally, the models will be verified against corresponding needle insertion experiments. METHODS: To verify simulation results, needle deflection and insertion forces were compared with corresponding experimental results acquired with an in-house developed needle insertion mechanical system. Additionally, contact stress distribution on needles from agar gel for various time scales were also studied. RESULTS: For the 15°, 30°, 45°, 60° bevel angle needles, and 90° blunt needle, the percentage error in needle deflection of each needle compared to experiments, were 7.3%, 9.9%, 8.6%, 7.8%, and 9.7% respectively. Varying the bevel angle at the needle tip demonstrates that the needle with a lower bevel angle produces the largest deflection, although the insertion force does not vary too much among the tested bevel angles. CONCLUSION: This experimentally verified computer-based simulation model could be used as an alternative tool for better understanding the needle-tissue interaction to optimise needle tip design towards improved biopsy efficiency.

Simulation of biopsy bevel-tipped needle insertion into soft-gel.

Planning and practice of surgical procedures can be improved through the use of modelling. This study provides an insight into the biopsy needle (i.e. hollow cannula) and needle-tissue interactions using a modelling approach, thus enabling the optimization of needle-tip designs not only for training but also for the planning of surgical procedures. Simulations of needle insertion into agar gel were performed using a Coupled Eulerian-Lagrangian (CEL) based finite element (FE) analysis, adapted for large deformation and tissue fracture. The experimental work covers needle insertion into 3% agar gel using a needle with a beveled tip of various angles, to assess the validity of the simulation. The simulated needle deflection and insertion force for two needles (i.e. Needle 1 with 18° bevel angle and Needle 2 with 27° bevel angle) were compared with corresponding experimental results. The contact stress (i.e. contact pressure) on the needles from the agar gel during the insertion of the needles were also studied. Observations indicate that varying the needle bevel angle from 27° to 18° results in a decrease of the peak force (i.e. puncture force) and an increase in needle deflection. Quantitatively, the percentage errors between the experimental data and the FE model for the total insertion force along the z-direction (i.e. Z Force) for Needle 1 and 2 were 4% and 4.8% (p > 0.05), respectively. Similarly, needle deflection percentage errors along the x-z plane were 5.7% and 10% respectively. Therefore, the forces and needle deflection values predicted by the simulation are a close approximation of the experimental model, validating the Coupled Eulerian-Lagrangian based FE model. Thus, providing an experimentally validated model for biopsy and cytology needle design in silico that has the potential to replace the current build and break approach of needle design used by manufacturers.

Differential dengue cross-reactive and neutralizing antibody responses in BALB/c and Swiss albino mice induced by immunization with flaviviral vaccines and by infection with homotypic dengue-2 virus strains.

We investigated whether cross-reactive and/or cross-protective antibodies against dengue virus could be generated in 6-week-old BALB/c mice by immunization with currently approved flaviviral vaccines, i.e., Japanese encephalitis (JE) BIKEN and yellow fever (YF) 17D. Cross-reactivity with dengue antigens was apparent in at least one-third each of JE-vaccinated mouse sera and of JE/YF-vaccinated mouse sera by dengue enzyme immunoassay, but was not detected in sera of mice immunized with YF vaccine alone. All the immunized BALB/c mice failed to generate neutralizing antibodies against the New Guinea C laboratory (NGC-lab) strain of dengue virus type 2. In addition, we determined the specificity of neutralizing antibodies elicited in 3-week-old Swiss albino mice against two homotypic dengue-2 strains, i.e., NGC-lab and Singapore 1999 (SING/99). Although sera from virus-inoculated mice displayed better neutralization against the corresponding strain, antibodies elicited by NGC-lab exhibited a significantly poorer neutralizing response against the SING/99 strain compared to antibodies elicited by SING/99 against NGC-lab. The differences may be related to sequence variations of approximately 3% between the envelope proteins of both strains. Amino acid disparities at positions 71 (Glu --> Ala), 112 (Ser --> Gly) and 124 (Ile --> Asn), which are found in dengue-2 neutralization escape mutants, were also found in the SING/99 strain. The envelope sequence differences may explain diminished binding of NGC-lab-induced neutralizing antibodies to neutralizing epitopes within the envelope of the SING/99 strain, resulting in a lower titer of neutralizing antibodies against another strain of the same serotype.

Modulation of Xenopus oocyte-expressed phospholemman-induced ion currents by co-expression of protein kinases.

Phospholemman (PLM), the major sarcolemmal substrate for phosphorylation by cAMP-dependent kinase (PKA) protein kinase C (PKC) and NIMA kinase in muscle, induces hyperpolarization-activated anion currents in Xenopus oocytes, most probably by enhancing endogenous oocyte currents. PLM peptides from the cytoplasmic tail are phosphorylated by PKA at S68, by NIMA kinase at S63, and by PKC at both S63 and S68. We have confirmed the phosphorylation sites in the intact protein, and we have investigated the role of phosphorylation in the regulatory activity of PLM using oocyte expression experiments. We found: (1) the cytoplasmic domain is not essential for inducing currents in oocytes; (2) co-expression of PKA increased the amplitude of oocyte currents and the amount of PLM in the oocyte membrane largely, but not exclusively, through phosphorylation of S68; (3) co-expression of PKA had no effect on a PLM mutant in which all putative phosphorylation sites had been inactivated by serine to alanine mutation (SSST 62, 63, 68, 69 AAAA); (4) co-expression of PKC had no effect in this system; (5) co-expression of NIMA kinase increased current amplitude and membrane protein level, but did not require PLM phosphorylation. These findings point to a role for phosphorylation in the function of PLM.