Optimal Intermittent Administration Interval of Abaloparatide for Bone Morphogenetic Protein-Induced Bone Formation in a Rat Spinal Fusion Model.

Both bone morphogenetic protein 2 (BMP-2) and abaloparatide are used to promote bone formation. However, there is no consensus about their optimal administration. We investigated the optimal administration theory for the pairing of BMP-2 and abaloparatide in a rat spinal fusion model. Group I was only implanted in carriers and saline. Carriers with 3 µg of recombinant human BMP-2 (rhBMP-2) were implanted in other groups. Abaloparatide injections were administered three times a week for group III (for a total amount of 120 µg/kg in a week) and six times a week for group IV (for a total amount of 120 µg/kg in a week) after surgery. They were euthanized 8 weeks after the surgery, and we explanted their spines at that time. We assessed them using manual palpation tests, radiography, high-resolution micro-computed tomography (micro-CT), and histological analysis. We also analyzed serum bone metabolism markers. The fusion rate in Groups III and IV was higher than in Group I, referring to the manual palpation tests. Groups III and IV recorded greater radiographic scores than those in Groups I and II, too. Micro-CT analysis showed that Tbs. Sp in Groups III and IV was significantly lower than in Group I. Tb. N in Group IV was significantly higher than in Group I. Serum marker analysis showed that bone formation markers were higher in Groups III and IV than in Group I. On the other hand, bone resorption markers were lower in Group IV than in Group I. A histological analysis showed enhanced trabecular bone osteogenesis in Group IV. Frequent administration of abaloparatide may be suitable for the thickening of trabecular bone structure and the enhancement of osteogenesis in a rat spinal fusion model using BMP-2 in insufficient doses.

Asymmetric Implant Design for Posterolateral Overhang of the Femoral Component in Total Knee Arthroplasty: A Retrospective Computed Tomography-Based Study.

Introduction During total knee arthroplasty (TKA), also referred to as total knee replacement (TKR), patients may experience pain in the posterolateral knee. One possible cause is the impingement between the popliteus tendon and the femoral components. The purpose of this study was to analyze the posterolateral overhang of the femoral component using 3D template software. Methods Preoperative CT scan images of 50 knees (11 males and 39 females) with osteoarthritis of grade 2 or lower according to the Kellgren-Lawrence classification were analyzed. The mean age of the subjects was 73.8±7.6 years (range 52-84 years). The Athena (Soft Cube Co., Ltd., Osaka, Japan) knee 3D image-matching software was used for the analysis. The positions of the two femoral components (symmetrical and asymmetrical) were simulated. In the coronal plane, the component overhang was measured between the resected lateral part of the posterior femur and its corresponding component size, and the two designs were compared in three zones (proximal, central, and distal). Results In the simulated femoral component, the asymmetric design had a significantly lower component overhang than the symmetric design in the proximal zone of the lateral posterior condyle (0.2±1.9 mm vs. 3.5±1.6 mm, p<0.01). In the proximal zone, significant overhang (>3 mm) was observed in 30 knees (60.0%) with the symmetric design, but only three knees (6.0%) had asymmetric designs (p<0.01). Conclusions The posterolateral overhang of the lateral posterior condyle occurs when a symmetrical prosthesis is used. The use of an asymmetric implant with a small, rounded proximal portion of the lateral posterior condyle improves this overhang and is expected to decrease problems such as impingement of the popliteus tendon and improve patient satisfaction.

Time elapsed from definitive diagnosis to surgery for osteonecrosis of the femoral head: a nationwide observational study in Japan.

OBJECTIVES: This study documents the time elapsed from the diagnosis of osteonecrosis of the femoral head (ONFH) to surgery, exploring the factors that influence ONFH severity. DESIGN: Retrospective observational study of a nationwide database. SETTING: The Kaplan-Meier method with log-rank tests was applied to examine the period from definitive diagnosis of ONFH to surgery using any surgery as the end point. For bilateral cases, the date of the first surgery was the endpoint. PARTICIPANTS: This study included 2074 ONFH cases registered in 34 university hospitals and highly specialised hospitals of the multicentre sentinel monitoring system of the Japanese Investigation Committee between 1997 and 2018. MAIN OUTCOME MEASURE: The primary outcome was the time from diagnosis to surgery. The secondary outcome was the proportion of subjects remaining without surgery at 3, 6 and 9 months, and at 1, 2 and 5 years after diagnosis. RESULTS: The median time to surgery was 9 months (IQR 4-22 months) after diagnosis of ONFH. The time to surgery was significantly shorter in the alcohol alone group and the combined corticosteroid and alcohol group than in the corticosteroid alone group (p=0.018 and p<0.001, respectively), in early stage ONFH with no or mild joint destruction (stages II and III, p<0.001), and with joint preserving surgery (p<0.001). The proportion without surgery was 75.8% at 3 months, 59.6% at 6 months, 48.2% at 9 months, 40.5% at 1 year, 22.2% at 2 years and 8.3% at 5 years. CONCLUSION: ONFH has been considered to be an intractable disease that often requires surgical treatment, but the fact that surgery was performed in more than half of the patients within 9 months from diagnosis suggests severe disease with a significant clinical impact. TRIAL REGISTRATION NUMBER: Chiba University ID1049.

Gait analysis of a patient after femoral nerve and malignant soft tissue tumor resections: a case report.

BACKGROUND: Malignant femoral soft tissue tumors are occasionally resected together with the femoral nerves, but this can cause loss of knee extensor muscle activity. To the best of our knowledge, no previous reports have detailed the gait analysis of such cases in combination with electromyography. Herein, we report the gait analysis of a patient who underwent left groin synovial sarcoma and left femoral nerve resection 12 years ago. CASE PRESENTATION: We analyzed the gait of a 38-year-old man who was able to walk unaided after the resection of a synovial sarcoma in the left groin together with the ipsilateral femoral nerve. The muscle activities of the affected medial (MH) and lateral hamstrings (LH), and lateral heads of the gastrocnemius (GL) were increased during 50-75% of the stance phase. The hip flexion angle of the affected limb was smaller, and the ankle plantar flexion angle of the affected limb was larger than that of the non-affected limb. This means that in the affected limb, the hip and ankle angles were adjusted to prevent knee collapse, and the MH, LH, and GL muscles contributed in the mid- and late-stance phases. Moreover, we found that the hamstring and gastrocnemius of the affected limb worked together to keep the ipsilateral knee extended in the mid-stance phase and slightly flexed in the late-stance phase. CONCLUSIONS: Patients capable of walking after femoral nerve resection may control their hamstrings and gastrocnemius muscles collaboratively to prevent ipsilateral knee collapse in the mid- and late-stance phases.

Sequential treatments with TRK inhibitors in a patient with NTRK fusion-positive sarcoma: A case report.

RATIONALE: Precision medicine and tumor-agnostic treatment strategies have recently been promoted for clinical use. One of the most successful treatments in patients with neurotrophic tyrosine receptor kinase (NTRK) fusion-positive tumors is targeting the tropomyosin receptor kinase (TRK) with an inhibitor. The TRK inhibitors, larotrectinib, and entrectinib, have been approved in many countries. Nevertheless, the most effective administration regimen for these TRK inhibitors is uncertain. To date, no reports have shown the efficacy of sequential treatment with larotrectinib and entrectinib in patients with NTRK fusion-positive tumors. In this report, we present a patient with NTRK fusion-positive sarcoma arising from the anterior mediastinum, with tumor progression after 4 months of entrectinib use. The patient took larotrectinib subsequently and maintained disease control for more than 21 months. PATIENT CONCERNS: A 48-year-old female visited a physician because she experienced difficulty in breathing and chest and back pain with no obvious cause 2 months ago. Computed tomography (CT)-guided biopsy was performed at a district general hospital, and histopathological examination revealed a small round cell tumor. She was referred to our hospital, and a second CT-guided biopsy was performed to confirm the pathological diagnosis. Considering the results of the histopathological examination, Ewing sarcoma was suspected, but a specific fusion gene was not detected due to poor quality specimens. DIAGNOSES: After 3 regimens of cytotoxic chemotherapy, biopsy was repeated, and specimens were analyzed using next-generation sequencing. The PHF20-NTRK1 fusion gene was detected, and the tumor was finally diagnosed as an NTRK fusion-positive sarcoma. INTERVENTIONS: She was administered the TRK inhibitor entrectinib, but the tumor started to grow after 4 months of medication, and she stopped taking entrectinib. After 1 cycle of cytotoxic chemotherapy, another TRK inhibitor, larotrectinib, was administered. OUTCOMES: Her stable disease was maintained for more than 21 months. Here, we have shown that sequential administration of both drugs can be effective. LESSONS: In the treatment of NTRK fusion-positive tumors, there are cases in which 2 approved first-generation TRK inhibitors can be used sequentially.

Femoral Bowing Increases Early Postoperative Stress around the Femoral Stem in Humans: A Finite Element Analysis.

Background: This study aimed to clarify the characteristics of stress distribution caused by the placement of tapered wedge stems in bowed femurs compared with that in normal femurs and the effect of varus stem placement. Methods: Models with normal and enhanced bowing were created from the right-side computed tomography data of a 17-year-old woman with the least bowing among 40 participants who underwent anterior cruciate ligament reconstruction or operative treatment for trauma in our hospital between January 2017 and May 2018. Finite element analysis was performed, assuming the tapered wedge stem was placed in the neutral and varus positions. Results: Varus stem placement on a femur with normal bowing showed a deviation and increase of von Mises stresses in the medial femur. Stem placement on a bowed femur, even when placed in the neutral position, increased stress across the periprosthetic bone. When the stem was placed in the varus position, von Mises stress across the periprosthetic bone increased. Zone 7, with strong bowing, demonstrated 3.6-fold increased stress compared with normal femurs. The maximum tensile principal stress was greatest in zone 6 and increased in zones 3 and 4. Conclusions: Surgeons should assess femoral bowing preoperatively and pay particular attention to intraoperative stem alignment for femurs with high bowing.

Efficacy of gelatin-thrombin matrix sealants for blood loss in single-level transforaminal lumbar interbody fusion.

Although gelatin-thrombin matrix sealants have been used successfully in other surgery types, their effect on reducing blood loss during single-level transforaminal lumbar interbody fusion is unclear. We thus examined the efficacy of gelatin-thrombin matrix sealants for reducing blood loss during such surgery. We analyzed 102 patients who underwent single-level transforaminal lumbar interbody fusion for lumbar degenerative disease. We compared body mass index, surgical time, intraoperative blood loss, postoperative blood loss, true total blood loss, hidden blood loss, the proportion of blood transfusion, blood pressure pre- and post-surgery (systolic and diastolic), and pre-and post-surgery laboratory data (hemoglobin, hematocrit, platelets, prothrombin time, activated partial thromboplastin time, and D-dimer) between patients in whom gelatin-thrombin matrix sealants were (GTMS group) or were not (control group) used during surgery. One-week postoperative epidural hematoma size was measured using magnetic resonance imaging. The GTMS and control groups included 54 (24 males and 30 females) and 48 patients (19 males and 29 females). Intraoperative, true total, and hidden blood loss; epidural hematoma size; and hospitalization duration were significantly lower in the GTMS than in the control group. Intraoperative blood loss correlated with surgical time (R = 0.523, P = .001), body mass index (R = 0.221, P = .036), and the amount of gelatin-thrombin matrix sealant used (r = -0.313, P = .002). In multivariate linear regression analysis using intraoperative blood loss as the dependent variable, surgical time (standardization coefficient 0.516, P = .001) and amount of gelatin-thrombin matrix sealant used (standardization coefficient -0.220, P = .032) were independently related factors. In our study, the GTMS group had significantly less intraoperative true total and hidden blood loss than did the control group. Thus, use of gelatin-thrombin matrix sealants reduce perioperative blood loss in transforaminal lumbar interbody fusion.

Influence of femoral bowing on stress distribution of the proximal femur: a three-dimensional finite element analysis.

BACKGROUND: Whether femoral bowing or its direction has a mechanical effect on the proximal femur is unclear. This study aimed to define the changes in stress distribution in the proximal femur associated with femoral bowing using finite element analysis. METHODS: We created four femoral models: original, entire lateral bowing, entire anterior bowing, and the middle of both (50% anterolateral bowing) from computed tomography data of women with standard bowing. Each model's stress distribution was compared by two-layering the stress distribution under loading conditions during walking. We also evaluated displacement vectors. RESULTS: In all directions of femoral bowing, the stress increased in the femoral neck and the femoral trochanter in the 50% anterolateral bowing. The direction of deformation of the vector for the femoral head increased anteroinferiorly in the 50% anterolateral bowing. CONCLUSIONS: This study showed that the stress distribution at the proximal femur shifted laterally. The high-stress area increased at the femoral neck or trochanter due to increasing femoral bowing. Femoral bowing also increases the anteroinferior vector in the femoral head. This study provides valuable insights into the mechanism of proximal femoral fractures in older adults.

Relationship between perceived and structural leg length discrepancies of patients with hip osteoarthritis dysplasia.

BACKGROUND: Only few studies have been conducted on leg length discrepancy (LLD) in patients with hip osteoarthritis (OA). This study aimed to examine the relationship between perceived LLD (pLLD) and structural LLD (sLLD) in patients with advanced OA and to determine the factors influencing both LLDs. This retrospective study aimed to answer the following questions: (1) are older adults less likely to perceive LLD than younger adults? (2) is there a relationship between pLLD and sLLD? and (3) is pLLD associated with patient satisfaction? HYPOTHESIS: We hypothesized that older adults are less likely to perceive LLD than younger adults. PATIENTS AND METHODS: We recruited 125 patients (102 women and 23 men) with hip OA associated with developmental dysplasia of the hip defined as grade 3 or higher according to the Tönnis classification and excluding contralateral grade 2 or higher. The mean age of the patients was 65.2±11.2 (36-85) years. Before surgery, 2-mm and 5-mm thick plates were placed on the floor on the plantar surface of the short leg to measure pLLD. Preoperative computed tomography (CT) was performed and sLLDs were measured using the 3D planning software ZedHip. The following associated factors were evaluated: age, height, weight, body mass index (BMI), adduction and abduction range of motion (ROM) of the affected hip joint, Crowe classification, standing pelvic inclination in the coronal plane, Cobb angle and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ). RESULTS: The absolute difference between pLLD and sLLD was modestly positively correlated with age (R=0.206; p<0.05) indicating older patients were less prone to perceive LLD. A strong positive correlation was found between pLLD (4.8±7.3mm; range: -37 to 28mm) and sLLD (6.4±7.0mm; range: -29.9 to 23.7mm) (R=0.714, p<0.05). The greater the pLLD, the smaller the hip abduction ROM (24.8±11.6°; range: 0 to 45°) tended to be, while the greater the sLLD, the smaller the hip abduction and adduction ROM (10.3±5.7°; range: 0 to 25°) tended to be (R= -0.259 and R= -0.297, respectively; p<0.05) The clinical significance of this finding is that pLLD may be improved if hip ROM training is performed before surgery. pLLD was significantly smaller in the group without pelvic inclination (8.0±14.1mm; range: -37 to 22mm) than in the group with pelvic inclination to the affected side (6.9±7.5mm; range: -12 to 28mm) and in the group with no inclination to the affected side (7.3±7.6mm; range: -8 to 25mm) (p<0.05) The clinical significance of this finding is that improving pelvic inclination with hip ROM training or muscle stretching may also reduce pLLD. No significant differences were noted between pLLD and JHEQ total scores or subgroups. DISCUSSION: Older patients had less pLLD. Preoperative pLLD was strongly correlated with sLLD but not with patient satisfaction. These results may be useful for conservative treatment of OA, preoperative planning and intraoperative leg length correction. LEVEL OF EVIDENCE: IV; case control study.

Survival rates of different bearing surfaces with the same model of stem in total hip arthroplasty: predictive factors for revision surgery.

INTRODUCTION: Few studies have examined the survival rates of total hip arthroplasty (THA) with the same femoral stem, and the predictive factors leading to the revision of stemmed metal-on-metal (MoM) THA remain unknown. We determined the long-term survival rate of stemmed MoM THA compared with that of metal-on-polyethylene (MoP) bearing THA, the effect of head size and cup placement angle on revision rate, and predictors of revision. MATERIALS AND METHODS: A total of 130 hips in 110 patients who underwent primary THA by the same surgeon were included. M2a-RingLoc with a metal-on-polyethylene bearing (group P, 53 hips), M2a-Taper with MoM bearing (group T, 44 hips), and M2a-Magnum with MoM bearing (group M, 33 hips) were used. The mean age at surgery was 63.1 ± 9.5 years, and the mean postoperative follow-up duration was 133.7 ± 39.1 months. Whole blood metal ion concentrations were measured preoperatively and postoperatively, and magnetic resonance imaging was performed to identify aseptic local tissue reactions (ALTRs). Kaplan-Meier survivorship analysis and multiple logistic regression analysis were performed. RESULTS: The THA survival rate up to the maximum postoperative follow-up period was 96.2% at 173 months, 46.6% at 179 months, and 47.8% at 145 months in groups P, T, and M, respectively, with revision as the endpoint. The stemmed MoM THA recorded a very low survival rate (p < 0.001). The ALTR rates were 70.5% and 63.6% in groups T and M, respectively. The risk factor for revision was the use of MoM bearing, and there was no difference in the results based on the head size in group M. Cobalt levels continued to increase postoperatively, although they were not accurate predictors of revision. CONCLUSIONS: Stemmed MoM THA has a very low survival rate and should be used with caution. It is important to monitor the patient's symptoms and perform appropriate imaging to ensure timely revision.

Stress distributions of the short stem and the tapered wedge stem at different alignments: a finite element analysis study.

BACKGROUND: The mechanical effects of stem length reduction and stem alignment on the surrounding femur remain unknown. This study directly compared the stress distribution on the surrounding femur of existing tapered wedge stems and short stems and examined the properties of stress distribution at different stem alignments in three dimensions. METHODS: Finite element analysis was conducted for standing and walking. The cementless stem was appropriately sized to ensure adequate contact with the medial cortical bone line that contours the medullary cavity. The stem neck axis was aligned with the femoral neck axis in the mid-position and placed in 2° of the varus and valgus, 3° of flexion and extension, and 10° and 40° of anteversion. RESULTS: Regardless of stem length, the trend of stress distribution was similar. The short stem generated less stress around the stem than the tapered wedge stem. In the coronal plane, the effect of varus and valgus deflection was small. In the sagittal plane, the stress generated around the stem was higher in the extended position than in the flexed position. In the horizontal plane, the stress generated around the stem was higher when the stem anteversion was smaller. CONCLUSIONS: Depending on the design, short stems can reduce the stress on the surrounding bone, compared to a longer tapered wedge with similar stress distribution. Additionally, a short stem can reduce the effect of the varus position. Stems should be placed to achieve stable initial fixation while noting that stresses increase with extension and reduced anteversion.

Three-Dimensional Evaluation of Innominate Bone Rotation in Female Patients with Developmental Dysplasia of the Hip.

Background: Patients with developmental dysplasia of the hip (DDH) are known to have abnormal pelvic morphologies; however, rotation of innominate bone features remains unclear. Thus, we investigated innominate bone rotation in patients with DDH by measuring the associated angles and distances using three-dimensional (3D) computed tomography. Methods: We defined four straight lines in pelvic 3D models: from the anterior superior iliac spine to the posterior superior iliac spine, from the anterior inferior iliac spine to the posterior inferior iliac spine, from the pubic tubercle to the ischial spine, and from the pubic tubercle to the ischial tuberosity. Similarly, we measured the angles formed by these lines using the vertical axis of the anterior pelvic plane on the horizontal plane and the horizontal axis on the sagittal plane. Additionally, we measured the distances between the femoral head centers and the acetabular centers in the coronal plane. Results: The difference in internal rotation angle between the superior and inferior parts of the iliac bone was significantly lower, by approximately 1.7°, in the DDH group than in the control group (p = 0.007); the difference between the inferior and superior parts of the ischiopubic bone was significantly higher, by approximately 1.5°, in the DDH group (p < 0.001). In the sagittal plane, the sum of the superior aspect of the iliac bone and the inferior aspect of the ischium was significantly lower in the DDH group (p = 0.001) than in the control group. The distances between the femoral heads and the acetabula were significantly greater in the DDH group than in the control group (p = 0.03, p < 0.01, respectively). Conclusions: Patients with DDH had a more internally rotated ilium and ischiopubic bone than normal individuals; however, it should be emphasized that internal rotation was reduced near the acetabulum, and the acetabulum was shifted laterally. Similarly, it was shown that patients with DDH had different rotations of the ilium and ischiopubic bone in the sagittal plane.

Generalized Tonic-clonic Seizure Caused by Tranexamic Acid Administration in Spinal Surgery: A Case Report and Literature Review.

Introduction: Tranexamic acid, an antifibrinolytic solvent, has been widely used for perioperative hemostasis in orthopedic surgery. However, to the best of our knowledge, there have been no reports in the literature of seizures caused by tranexamic acid administration for orthopedic surgery. This report presents a case of generalized tonic-clonic seizure caused by tranexamic acid administration immediately after lumbar interbody fusion surgery for lumbar spinal canal stenosis. Case Report: A 66-year-old Japanese woman scheduled for lumbar interbody fusion surgery was administered an intravenous pre-operative dose (1000 mg) of tranexamic acid and 2000 mg immediately after the surgery. Generalized convulsive seizures occurred on awakening from anesthesia. Although the seizures disappeared after deepening the anesthesia, they recurred on awakening, and extubation could not be performed. A computed tomography scan was immediately performed, revealing an intracranial lesion, but there were no other obvious abnormal findings. The patient was then managed in the intensive care unit, and several convulsions occurred on the 2nd post-operative day. The convulsions disappeared on the 3rd post-operative day, and the patient has had no sequelae to date. Conclusion: This original case report will be of interest to orthopedic surgeons, anesthesiologists, neurologists, and pharmacologists. The information presented may also have a broader impact in the field of medicine for other types of surgeons. The details provided in the report will advance knowledge in the area of orthopedic surgery, neurology, pharmacology, and anesthesiology. Orthopedic surgeons should be aware that one of the major complications of tranexamic acid administration is seizure liability.

Alkaptonuria with rapidly destructive arthropathy of the hip: A case report and literature review.

Alkaptonuria-related rapidly destructive arthropathy of the hip joint has not been reported in detail with both imaging and histopathological findings in the literature. We, herein, presented the case of a 79-year-old male patient who suddenly started experiencing marked right hip pain. Radiography showed that the femoral head was spherical; however, after 3 months, approximately half of the femoral head was destroyed despite there being almost no change in the acetabulum. Radiographs of the spine also showed fusion between multiple vertebrae. Significant osteoporosis was observed on roentgenography, together with decreased bone density. Urinary gas chromatography-mass spectrometry analysis revealed that a large amount of homogentisic acid was excreted. During total hip arthroplasty, gray and muddy contents were observed in the joint capsule, and the surface of the destroyed femoral head was black. Histopathologically, granulomatous foci containing fragmented bone and cartilage debris were found in the bone marrow space of the joint surface, and the cartilage tissue was pigmented brownish black. The patient was subsequently diagnosed with ochronotic hip joint destruction. The present case report is the first to demonstrate rapidly destructive coxopathy associated with alkaptonuria using both imaging and histopathological findings. These findings clearly show that severe hip joint destruction defined as rapidly destructive hip arthropathy can occur in a very short time period for patients with alkaptonuria.

Is the Iliac Wing Curved Inward in Patients with Developmental Dysplasia of the Hip?

BACKGROUND: There is a paucity of studies on the iliac curvature in developmental dysplasia of the hip (DDH). Here, we examined the iliac curvature in DDH using three-dimensional computed tomography. METHODS: We allocated cases with a center-edge angle of < 20° to the DDH group (55 cases) and cases with a center-edge angle of > 25° to the control group (57 cases) and measured the straight line (line A) between the anterior and posterior superior iliac spines. We examined which part of the iliac bone line A passes through and classified the results into 4 categories (type A, inside the iliac bone; type B, through the iliac bone; type C, outside the iliac bone; and type D, both inside and outside the iliac bone) to evaluate the iliac wing curvature. After measuring the area and internal surface of the iliac wing using line A, we examined the correlation between these values, the interspinous distance, the superior iliac angle, and the center-edge angle. RESULTS: Distributions of the four types were compared between the two groups; there was no significant difference. The length of the portion of line A inside the ilium and the area formed by line A and the iliac wing, which shows the degree of iliac wing curvature, were not significantly different between the groups. There were no correlations between these values and the center-edge angle; however, there were weak positive correlations among the interspinous distance, the superior iliac angle, and the center-edge angle. CONCLUSIONS: The inward nature of the iliac bone in patients with DDH is mainly due to the internal rotation of the entire iliac bone and less likely due to the curvature of the iliac bone.

Fluorodeoxyglucose Positron-Emission Tomography/Computed Tomography and Magnetic Resonance Imaging for Adverse Local Tissue Reactions near Metal Implants after Total Hip Arthroplasty: A Preliminary Report.

BACKGROUND: Plain computed tomography (CT) and magnetic resonance imaging (MRI) are useful for diagnosing adverse local tissue reactions after metal-on-metal total hip arthroplasty (THA), but metal artifacts can hamper radiological assessments near the implants. We sought to clarify the usefulness of 18F-fluorodeoxyglucose positron-emission tomography (18F-FDG-PET) CT and MRI in the periprosthetic region, which is difficult to assess after THA due to metal artifacts. METHODS: We performed preoperative 18F-FDG-PET/CT and 18F-FDG-PET/MRI, as well as plain CT and MRI, in 11 metal-on-metal THA patients who underwent revision surgery. RESULTS: Most patients showed high FDG uptake in the metal artifact areas and pseudotumors in the 18-F-FDG-PET/CT and 18-F-FDG-PET/MRI scans. Intraoperative intra-articular macroscopic and histopathological intra-articular granulation tissue findings were suggestive of adverse local tissue reaction. CONCLUSIONS: The enhanced uptake in the metal artifact areas seemed to reflect adverse local tissue reaction. Therefore, 18F-FDG-PET/CT and 18-F-FDG-PET/MRI can be useful for the auxiliary diagnosis of adverse local tissue reactions after metal-on-metal THA.

Comparison of Cup Setting Angle Accuracy between Computed Tomography-Based and Computed Tomography-Free Navigation in the Same Patients with Crowe's Classification I or II Hip Dysplasia.

BACKGROUD: In total hip arthroplasty, the cup setting angle may affect the postoperative results. In recent years, both computed tomography-based navigation and computed tomography-free (imageless) navigation have been reported to produce high accuracy in cup installation; however, no direct comparison between these two methods has been performed. The present study aimed to directly compare the cup installation angle accuracy between computed tomography-based navigation and computed tomography-free navigation in patients with Crowe's classification stage I or II dysplastic osteoarthritis and to examine the factors affecting the cup installation accuracy. METHODS: Using both navigation systems for the same technique, primary total hip arthroplasty was performed by the same surgeon in 36 patients. A cup was installed using computed tomography-based navigation, and the installed cup was measured again using computed tomography-free navigation. We compared the error between the target angle and the intraoperative installation angle for each navigation method by performing statistical analyses. RESULTS: For computed tomography-based navigation, errors in the inclination and the anteversion angles compared to the target angle were 3.14° ± 1.55° and 1.47° ± 0.99°, respectively. For computed tomography-free navigation, the inclination and anteversion angle errors were significantly larger, i.e., 6.84° ± 4.78° and 5.43° ± 5.22°, respectively (p < 0.01). The inclination and anteversion angles of computed tomography-free navigation were correlated, and there were no significant factors influencing the error. CONCLUSIONS: Computed tomography-based navigation is more accurate for cup installation than computed tomography-free navigation. When using computed tomography-free navigation, it is necessary to add technical schemes before and during surgery to improve the cup installation accuracy.

Iliac anatomy in women with developmental dysplasia of the hip: Measurements using three-dimensional computed tomography.

BACKGROUND: We aimed to clarify the iliac anatomy in developmental dysplasia of the hip using three-dimensional computed tomography. METHODS: The distance between two points along each anatomical portion of the ilium, including the acetabular center, were compared between patients in the dysplasia and control groups. RESULTS: There were no significant differences in the upper part of the ilium between the groups. However, three distances that included the acetabular center were significantly shorter in the dysplasia group than in the control group. CONCLUSIONS: Our study suggests that bone dysplasia occurs in the ilium near the acetabulum, not in the iliac wings.

Finite Element Analysis of Stress Distribution in Flat and Elevated-Rim Polyethylene Acetabular Liners.

BACKGROUD: No study has compared flat and elevated-rim polyethylene liners in terms of stress distribution on the bearing surface. The purpose of this study was to investigate the difference in stress distribution between flat and elevated-rim polyethylene liners. METHODS: A stress analysis was performed by using the 3-dimensional finite element method. The cup was placed at an open angle of 20°, the flat liner and the liner with a 10° elevation was placed at inclination angles of 80°, 70°, and 60°. RESULTS: Compared with the 60° flat liner, the 80° and 70° flat liners showed higher stress at the liner edge. In the elevated-rim liner, the stress was high at the liner edge along the cup edge. When the von Mises equivalent stress was applied to each element of the liner, the high stress area (volume) was the largest for the 80° flat liner, second largest for the 80° elevated-rim liner, and third largest for the 70° flat liner. The average contact pressure also followed the same order. CONCLUSIONS: Elevated-rim liners affect the stress distribution by increasing the area of contact. However, since elevated-rim liners exhibit high stress at the cup edge, they are likely to result in new problems including liner failure. These findings could aid surgeons in the selection of liners and determination of revision methods such as isolated liner exchange vs. acetabular cup revision for a well-fixed metal cup with a higher inclination angle in revision total hip arthroplasty.

Histological evaluation of the acetabular labrum after bipolar hip hemiarthroplasty: a case report.

We report herein the microstructure of the acetabular labrum obtained from a patient with stem loosening but without bipolar cup migration who had undergone hemiarthroplasty for femoral neck fracture 18 years ago. We used light and scanning electron microscopy to investigate the influence of bipolar cup on acetabular labrum in vivo. Deparaffinized blocks were treated with 2 N NaOH to digest the cell matrix, allowing the collagen fibers, constituting the acetabular labrum, to be observed under scanning electron microscopy. Although chondrocyte atrophy was seen, the basic structure was not different from the normal tissue images of the elderly. However, in the deep part of the acetabular labrum, there was an area that was not stained with Alcian blue observed with light microscopy, and there was an amorphous tissue without type II collagen fibrils observed with scanning electron microscopy. These findings proved that the acetabular labrum has partially degenerated over the long term after bipolar hemiarthroplasty, and that the acetabular labrum can survive in vivo in such a condition. Given that hemiarthroplasty has a possibility to preserve the face-to-face tissue in the long term in vivo, it may be one of the valuable options for modern or future joint reconstruction surgery.