The assessment of canal flare index and proximal femoral bone density can improve stem selection for peri-prosthetic bone maintenance after total hip arthroplasty.

INTRODUCTION: Bone maintenance after total hip arthroplasty (THA) is important for implant success. This study aimed to investigate the relationship between patient characteristics and periprosthetic bone maintenance after THA for better implant selection. MATERIALS AND METHODS: This retrospective cohort study enrolled 112 consecutive patients who underwent THA using full hydroxyapatite (HA) compaction with short (n = 55) or short-tapered wedge (n = 61) stems. Periprosthetic bone mineral density (BMD) was compared between the two groups after propensity score matching, and the relationship between periprosthetic BMD changes and patient background was analyzed. RESULTS: Both groups showed similar periprosthetic BMD changes after adjusting for patient background using propensity score matching. Canal flare index > 3.7 in patients that underwent THA using tapered-wedge stem (odds ratio (OR), 3.2; 95% confidence interval (CI), 1.3-7.9, p = 0.013) and baseline zone 1 BMD > 0.65 in patients that received with short HA compaction stems (OR, 430.0; 95% CI 1.3-1420, p = 0.040) were associated with proximal periprosthetic bone maintenance after THA. CONCLUSION: Considering their predictive value, canal flare index and zone 1 BMD assessment might be useful strategies for implant selection during THA.

What effect does preoperative flexion contracture have on the component angles in unicompartmental knee arthroplasty?

PURPOSE: The indication for unicompartmental knee arthroplasty (UKA) has been extended to cases with some degree of preoperative knee flexion contracture recently. The purpose of this study was to clarify the effect of flexion contracture on component angles. MATERIALS AND METHODS: Thirty-five fixed-bearing UKAs using the spacer block technique with preoperative flexion contracture (Group FC) and 35 UKAs using the same technique without preoperative flexion contracture (Group NC) were included. Using radiographs, the coronal femoral component angle, coronal tibial component angle, sagittal femoral component angle, and sagittal tibial component angle were determined. Also, extension and flexion angles of the knee as well as coronal Hip-Knee-Ankle (HKA) angles in long-leg standing radiographs were measured. The data about the thickness of the selected insert were also collected. The above results were compared between the two groups. RESULTS: The femoral component tended to be placed in a more varus and flexed position in Group FC, while no significant difference was found about the tibial component angles. While there was no significant difference in pre- and postoperative knee flexion angles between the two groups, flexion contracture remained postoperatively in Group FC. Preoperative HKA angle was greater in Group FC while the difference was no longer significant postoperatively. Regarding the thickness of the selected insert, thicker inserts tended to be used in Group FC. CONCLUSIONS: In fixed-bearing UKA with the spacer block technique, the femoral component tended to be placed in a flexed and varus position in the knees with preoperative flexion contracture.

Accuracy of portable navigation during THA in patients with severe developmental dysplasia of hip.

INTRODUCTION: Correct cup placement in total hip arthroplasty (THA) for patients with developmental dysplasia of the hip (DDH) is considerably difficult. This study aimed to analyze the orientation accuracy of cup insertion during THA using a portable navigation system in patients with DDH. MATERIALS AND METHODS: In this retrospective cohort study, we analyzed data from 64 patients who underwent THA using infrared stereo camera-matching portable navigation. Patients underwent THA via the anterolateral approach in the lateral decubitus position. Navigation records for intraoperative cup angles, postoperative cup angles measured on computed tomography (CT) images, and cup angle measurement differences were measured and compared between patients with non-DDH/mild DDH and severe DDH. Furthermore, the predictive factors for outliers of accurate acetabular cup placement were analyzed. RESULTS: The average measurement absolute abduction differences (postoperative CT-navigation record) were 3.9 ± 3.5° (severe DDH) and 3.3 ± 2.6° (non-DDH/ mild DDH), and the anteversion differences were 4.7 ± 3.4° (severe DDH) and 2.3 ± 2.1° (non-DDH/ mild DDH). The anteversion difference was different between the two groups. Multivariate analysis showed that the navigation difference (absolute difference in anteversion between postoperative CT and navigation records of > 5°) was significantly associated with severe DDH (odds ratio [OR]: 3.3; p = 0.049, 95% confidence interval [CI]: 1.0-11.1) and posterior pelvic tilt (OR: 1.1; p = 0.042, 95% CI: 1.0-1.27). CONCLUSIONS: In patients with severe DDH, it is important to pay close attention during THA using portable navigation. However, the average difference was < 5º even in patients with severe DDH, and the accuracy may be acceptable in a clinical setting when the cost is considered.

Mid- to Long-Term Results of Total Knee Arthroplasty for Charcot Arthropathy of the Knee.

Background: Total knee arthroplasty (TKA) for Charcot arthropathy of the knee is considered controversial because of its higher complication rate compared with that of TKA for osteoarthritis. In this study, we investigated the clinical outcomes, survival rates, and complications of primary TKA for Charcot arthropathy. Methods: We conducted a retrospective analysis of nine patients (12 knees) with Charcot arthropathy who underwent TKA. The mean age of the patients was 63.9 ± 9.4 years (range, 52-83 years). The most frequent causative disease was diabetes mellitus (three patients). Patients' clinical outcomes, including the 2011 Knee Society Score and the range of motion, were compared between preoperative and the most recent postoperative data. The 5- and 10-year survival rates for aseptic revision, revision due to infection, and complications were examined. The mean follow-up period was 7.3 ± 3.9 years (range, 3-14 years). Results: The 2011 Knee Society Score and the knee flexion angle significantly improved after TKA surgery (P < 0.05). The 5-year survival rates for aseptic revision, revision due to infection, and complications were 100%, 91.7%, and 83.3%, respectively; the 10-year survival rates for these parameters were the same. One patient underwent revision for insert replacement due to periprosthetic infection, and the other patient had varus/valgus instability due to soft tissue loosening. Conclusions: The mid- to long-term results of TKA for Charcot arthropathy were generally favorable. Our findings indicate that TKA may be a viable treatment option for Charcot arthropathy.

Prediction of 3-Dimensional Coverage Surface Area of the Femoral Head in Hip Dysplasia Through Conventional Computed Tomography.

Background: Assessment of 3-dimensional (3D) femoral head coverage is critical in evaluating, preoperative planning, and treating hip dysplasia. Purpose: To (1) propose a mathematical model to establish 3D femoral head coverage using conventional computed tomography (CT), (2) determine the correlation of 2D parameters with 3D coverage, and (3) characterize the patterns of dysplasia based on 3D morphology. Study Design: Cross-sectional study; Level of evidence, 3. Methods: We identified 30 patients (n = hips) with symptomatic dysplasia and 30 patients (n = hips) without dysplasia. Patients with dysplastic hips were matched with regard to sex, age, and body mass index to those with nondysplastic hips. Preoperative CTs were analyzed using 3D software, and 3D femoral head surface area coverage (FHSAC; in %) was assessed in 4 quadrant zones: anteromedial, anterolateral, posteromedial, and posterolateral. To assess lateral coverage of the femoral head, we introduced the anterolateral femoral head coverage angle (ALFC) and the posterolateral femoral head coverage angle (PLFC). Results: Reduced femoral head coverage was more pronounced in dysplastic versus nondysplastic hips in the anterolateral quadrant (18% vs 40.7%, respectively) and posterolateral quadrant (35.8% vs 56.9%, respectively) (P < .0001 for both). Dysplastic hips had smaller ALFC and PLFC (18.4° vs 38.7°; P < .0001; 47.2° vs 72.3°; P = .0002). Anterolateral and posterolateral FHSAC were strongly correlated with the ALFC (r = 0.88; P < .0001) and the PLFC (r = 0.82; P < .0001) along with the lateral center-edge angle (anterolateral, r = 0.75; P < .0001; posterolateral, r = 0.73; P < .0001). Prediction models established for FHSAC had strong agreement with explanatory CT variables (anterolateral: r = 0.91; P < .0001; posterolateral: r = 0.90; P < .0001). The cutoff values for anterolateral and posterolateral FHSAC were 25% and 41%, respectively. In dysplastic hips, global deficiency was most common (15/30 hips), 9 hips showed an anterolateral deficiency, and 4 hips had a posterolateral deficiency pattern. Conclusion: The ALFC and The PLFC were strongly correlated with 3D lateral FHSAC and were able to predict 3D coverage accurately.

Influence of Distal Reference Point of the Tibial Mechanical Axis on the Ankle and Hindlimb Alignment Change after Total Knee Arthroplasty.

The alignment philosophy in total knee arthroplasty (TKA) has tended to shift from the gold standard of mechanically aligned technique to personalized alignment, such as the kinematically aligned (KA) technique. However, the influences of different surgical techniques on lower limb alignment relative to the ground are not fully investigated. This study investigated the influence of the ankle and hindlimb alignment change after mechanically aligned TKA and KA-TKA. The varus osteoarthritic patients who underwent TKAs were divided into a mechanically aligned TKA group (group M, n = 50) and a KA-TKA group (group K, n = 50). Radiographic parameters (hip-knee-calcaneus [HKC] angle, hip-knee-ankle [HKA] angle, talar tilt angle [TTA], and tibiocalcaneal angle [TCA]) were investigated using full-length standing radiographs. The deviation angle (ΔTA; angle between the tibial mechanical axis [TMA] and the ground tibial mechanical axis [gTMA]) and the change of ΔTA (cΔTA) were also assessed. These parameters were compared between the two groups, along with the correlation between the preoperative HKA angle and other parameters. ΔTA, TTA, and TCA showed no differences between the groups pre- and postoperatively, and no significant changes were observed postoperatively. The preoperative HKA angle showed a significant negative correlation with cΔTA in both groups (group M: r = -0.33, p = 0.02; group K: r = -0.29, p = 0.04) although no correlation was observed the with preoperative TTA and TCA. Despite no change in ΔTA after surgery, the preoperative varus deformity was associated with a change in the deviation between gTMA and TMA after surgery. A severely varus knee may be inappropriate for ground KA-TKA.

Revealing a Natural Model of Pre-Osteoarthritis of the Hip Through Study of Femoroacetabular Impingement.

Femoroacetabular impingement (FAI) is considered the mechanical cause of hip osteoarthritis (OA). Surgical intervention involves labrum repair and osteochondroplasty to remove the impingement, alleviating symptoms. Nevertheless, some patients progress to hip OA after surgery, indicating that factors other than mechanical abnormality are contributing to hip OA progression. This review article discusses our laboratory's studies on hip FAI and OA, undertaken to identify key molecular players in the progression of hip OA. Transcriptome analysis identified peroxisome proliferator activated receptor gamma (PPARγ) as a crucial molecule in early hip OA. PPARγ, widely expressed in chondrocytes, has a protective role in preventing OA, but its true mechanism remains unknown. We observed a dysregulation of DNA methyltransferase (DNMT) in the progression of hip OA, with high expression of DNMT1 and 3A and downregulation of DNMT3B. Moreover, we established that DNMT3A is the main molecule that is binding to PPARγ promoter CpG area, and hypermethylation of this area occurs during disease progression. This suggests that epigenetic changes are a main mechanism that regulates PPARγ expression. Finally, we developed a novel rabbit model of hip FAI and OA and are currently performing studies to validate our small-animal model to human FAI.

Bearings can dislocate with smaller femoral components and thicker bearings in Oxford™ medial unicompartmental knee arthroplasty.

BACKGROUND: A mobile bearing can dislocate when joint laxity is larger than jumping height, the height difference between the bottom and the peak of the bearing (the highest point of the upper bearing surface on each side). Significant laxity due to improper gap balancing should therefore be avoided. However, once the bearing rotates vertically on the tibial component, the bearing can dislocate with smaller laxity than the jumping height. We mathematically calculated the required laxity for dislocation (RLD) and the required rotation of the bearing for dislocation (RRD). The current study addressed the question: 1) could the femoral component size and the bearing thickness affect the RLD and RRD? HYPOTHESIS: The femoral component size and the bearing thickness could affect the MLD and MRD. METHODS: The RLD and RRD were calculated using the bearing dimensions provided by the manufacturer with femoral component size, bearing thickness, and directions (anterior, posterior, and medial/lateral) as the variables on a two-dimensional basis. RESULTS: The RLD was 3.4 to 5.5mm in the anterior, 2.3 to 3.8mm in the posterior, and 1.4 to 2.4mm in the medial or lateral directions. The RLD decreased with a smaller femoral size or a thicker bearing. Similarly, the RRD decreased with a smaller femoral size or a thicker bearing thickness in all directions. CONCLUSIONS: Increased bearing thickness and decreased femoral component size deceased the RLD and RRD, which would relate to an increased risk of dislocation. Selecting the femoral component as large as possible and the bearing as thin as possible would therefore be helpful in the prevention of dislocation. LEVEL OF EVIDENCE: III; comparative computer simulation study.

Knee Stability following Posterior-Stabilized Total Knee Arthroplasty: Comparison of Medial Preserving Gap Technique and Measured Resection Technique.

Novel medial preserving gap technique (MPGT) focuses on medial compartment stability and allows lateral physiological laxity. This study aimed to compare the MPGT with the measured resection technique (MRT) to determine which provides better postoperative knee stability after posterior-stabilized total knee arthroplasty (PS-TKA). Primary PS-TKA, using either MPGT (n = 65) or MRT (n = 65), was performed in 130 patients with varus knee osteoarthritis. Postoperative knee stabilities at extension and flexion were assessed using varus-valgus stress radiographs and stress epicondylar view, respectively (at 1 month, 6 months, 1 year, and 3 years postoperatively). The distance between the femoral prosthesis and polyethylene insert was measured on each medial and lateral side, defined as the medial joint opening (MJO) and lateral joint opening (LJO), respectively. Decreasing MJO or LJO translated to increasing postoperative stability. The femoral external rotation angle was compared between the two surgical techniques; postoperative knee stability was also compared between the medial and lateral compartments, as well as the surgical techniques. A significant difference was found in the femoral external rotation angle between MPGT (4.2 ± 0.2 degrees) and MRT (3.6 ± 0.1 degrees, p < 0.01). Postoperative MJOs both at extension and flexion were significantly smaller than LJOs using MPGT and MRT at all time points (p < 0.05). MJOs and LJOs at extension using MPGT were significantly smaller than those when using MRT, at 1 and 3 years postoperatively (p < 0.05). Furthermore, MJOs at flexion using MPGT were significantly smaller than those when using MRT at 6 months, 1 year, and 3 years postoperatively (p < 0.05). MPGT provided higher postoperative medial knee stability than MRT both at extension and flexion, even at 3 years after PS-TKA. This suggests that this newly developed surgical technique is a more feasible option than MRT for the preservation of postoperative medial knee stability.

Greater hip abductor size in prearthritic patients with developmental dysplasia of the hip versus femoroacetabular impingement.

Developmental dysplasia of the hip (DDH) and femoroacetabular impingement (FAI) are common hip pathologies and important risk factors for osteoarthritis, yet the disease mechanisms differ. DDH involves deficient femoral head coverage and a shortened abductor moment arm, so this study hypothesized that the cross-sectional area (CSA) of the gluteus medius/minimus muscle complex and the stabilizing iliocapsularis muscle would be larger in DDH versus FAI, without increased fatty infiltration. A longitudinal cohort identified prearthritic patients with DDH or FAI who underwent imaging before surgery. Patients with DDH and FAI (Cam, Pincer, or Mixed) were 1:1 matched based on age, sex, and body mass index. Magnetic resonance imaging was used to measure the gluteus medius/minimus complex and iliocapsularis in two transverse planes. Amira software was used to quantify muscle and noncontractile tissue. Paired samples t-tests were performed to compare muscle size and composition (p < 0.05). There were no differences in the iliocapsularis muscle. Patients with DDH had significantly larger CSA of the gluteus medius/minimus complex at both transverse planes, and the noncontractile tissue proportion did not differ. The mean difference in overall muscle CSA at the anterior inferior iliac spine was 4.07 ± 7.4 cm2 (p = 0.005), with an average difference of 12.1%, and at the femoral head this was 2.40 ± 4.37 cm2 (p = 0.004), with an average difference of 20.2%. This study reports a larger CSA of the gluteus medius/minimus muscle complex in DDH compared to FAI, without a difference in noncontractile tissue, indicating increased healthy muscle in DDH.

Effects of Femoral Component Design on the Deepest Point Position of the Trochlear Grove in Kinematically Aligned Total Knee Arthroplasty: A Comparison of Four Prothesis Designs.

The aim of the study is to explore and compare the differences in trochlear shape and knee anatomy between four types of prostheses and preoperative native knee matched with preoperative computed tomography (CT). Thirty patients were scheduled for primary kinematically aligned total knee arthroplasty (TKA) for varus knee osteoarthritis at our hospital and the region between their pelvis to ankle joint was simulated using a CT-based three-dimensional planning software. The axial plane containing the transepicondylar axis was set as Slice A, and the 10-mm distal plane from Slice A was set as Slice B. The distances to the deepest trochlear groove between the native knee and each prosthesis and the medial and lateral facet heights were compared among the four groups. The deepest femoral trochlear groove of the prostheses was located 1.6 to 3.0 mm more medial than that of the native knee, and in the Persona group, it was significantly more medial than in the e-motion or Triathlon groups on both Slices A and B. The native knee and the medial and lateral facet heights of the four prostheses on both Slices A and B were significantly lower than those of preoperative native knees when femoral prostheses were set in the kinematically aligned (KA)-TKA position. The deepest point of the trochlear groove of the Persona group was the most medial among the four prostheses studied, and the deepest points differed depending on the prosthesis design in KA-TKA. Thus, surgeons should carefully select the type of prostheses used in KA-TKA.

Comparing the accuracy of three-dimensional mini-optical portable navigation and accelerometer-based portable navigation system for acetabular cup placement during total hip arthroplasty.

INTRODUCTION: This study compared the accuracy of three dimensional (3D) mini-optical navigation and accelerometer-based portable navigation systems for cup positioning during a total hip arthroplasty (THA) in the supine position. MATERIALS AND METHODS: This retrospective cohort study assessed data for 77 hips using 3D mini-optical navigation (n = 37) and accelerometer-based portable navigation (n = 40). The patients underwent THA through the mini-anterolateral approach in the supine position using a portable navigation system. We assessed the preoperative target angles, recorded intraoperative cup angles, postoperative CT imaging angles, cup angle measurement errors, and other clinical parameters. RESULTS: The mean absolute differences in radiographic inclination were similar between 3D mini-optical navigation and accelerometer-based portable navigation systems during THA in the supine position (2.8° ± 1.7° vs 2.8° ± 1.9°, p = 0.637). The mean absolute differences in radiographic anteversion were also similar (2.6° ± 2.3° vs 2.5° ± 1.9°, p = 0.737). Cup malalignment (absolute difference of inclination or anteversion between postoperative CT and preoperative target angle of > 5°) was significantly associated with body mass index (BMI) in accelerometer-based portable navigation but not in 3D mini-optical navigation. CONCLUSIONS: This is the first study to compare the accuracy of cup positioning between 3D mini-optical and accelerometer-based navigations in THA in the supine position. Both portable navigation systems accurately identified the orientation of cup placement. The accuracy of 3D mini-optical navigation is not affected by high BMI and may be preferred over other options in such patients.

Acetabular coverage analysis of the proximal femoral head accurately characterizes dysplastic acetabular morphology.

This study aimed to (1) measure acetabular sector angle (ASA) from proximal to distal positions along the axial femoral head axis, (2) identify acetabular deficiency patterns, and (3) correlate ASA at different axial positions with other radiological measurements in acetabular dysplasia. We identified 30 hips with dysplasia (lateral center edge angle [LCEA] <20°) and 30 hips without dysplasia (LCEA >25°) from a retrospective cohort. Anterior and posterior ASA (AASA, PASA) were measured in the axial computed tomography plane through the femoral head center (equatorial) and two axial positions above the equatorial line (intermediate and proximal). Deficiency patterns were identified using ASA cut-off values determined from receiver operating characteristic curves. Pearson's coefficients were used for correlations. Compared to non-dysplastic hips, AASA in dysplastic hips was significantly smaller in all levels: equatorial (46.1 ± 7.3 vs. 54.9 ± 8.5,° p < 0.001), intermediate (62.1 ± 11.2 vs. 69.0 ± 10.6,° p = 0.02), and proximal (102.9 ± 14.2 vs. 128.3 ± 23.0,° p < 0.001). According to proximal ASA (Pro-ASA) cut-off values in dysplastic hips, global deficiency was most prevalent (19/30, 63.3%), followed by anterior (6/30, 20%) and posterior (3/30, 10%) deficiency. There were strong correlations between acetabular anteversion and Eq-AASA (r = -0.74, p < 0.001) and LCEA and pro-PASA (r = 0.82, p < 0.001). Clinical significance: Acetabular sector angle provides insight into acetabular morphology and patterns of deficiency, providing essential information for precise acetabular reorientation.

Intramedullary rod insertion places the femoral component more laterally during Oxford medial unicompartmental knee arthroplasty.

BACKGROUND: This study aims to assess the influence of intramedullary rods on the implantation positions of femoral components using Microplasty instrumentation in Oxford unicompartmental knee arthroplasty. We hypothesized that femoral components can be laterally implanted incorrectly when using intramedullary rods. METHODS: This prospective study included all 45 consecutive patients (53 knees) who underwent Oxford unicompartmental knee arthroplasty surgery for anteromedial osteoarthritis or spontaneous osteonecrosis of the knee at our hospital during the study period. A custom-made toolset comprising a triangular caliper and circular trial bearings was used to evaluate the distance between the bearing and the vertical wall of the tibia implant (wall-bearing space) using the caliper at 90° flexion both with and without intramedullary rods. RESULTS: The wall-bearing space was significantly larger when the intramedullary rod was used than when intramedullary rod was not used (1.8 ± 1.1 mm versus 3.4 ± 1.2 mm, P < 0.001). The mean difference of wall-bearing space with and without intramedullary rod was 1.6 ± 0.7 mm. CONCLUSIONS: Femoral components can be laterally implanted incorrectly by an average of 1.6 mm when using intramedullary rods. The wall-bearing space should be evaluated using trial components, and if the relationship is improper, it should be corrected before keel slot preparation.

The Lateral Malleolus Is a Simple and Reliable Landmark that Can Be Used to Reliably Perform Restricted Kinematically Aligned Total Knee Arthroplasty-Anatomical and Clinical Studies in Japanese Population.

In restricted kinematic alignment total knee arthroplasty (TKA), bone resection is performed within a safe range to help protect against failure from extreme alignments. Patient-specific instrumentation, navigations, and robotics are often required for restricting bone cuts within a specified safe zone. We hypothesized that the lateral malleolus could be used as a landmark for restricting the tibial osteotomy using a mechanical jig. Here, we examine its feasibility in anatomical and clinical settings. We studied long-leg standing radiographs of 114 consecutive patients (228 knees) who underwent knee arthroplasty in our institution. We measured the lateral malleolus angle (LMA), the angle between the tibial axis and the line between the center of the knee and the lateral surface of the lateral malleolus. The medial proximal tibial angle was also measured before and after restricted kinematic alignment TKA under restriction with reference to the lateral malleolus. Mean LMA was 5.5 ± 0.5 degrees. This was relatively consistent and independent of patient's height, weight, and body mass index. The lateral malleolus is a reliable bone landmark that can be used to recognize approximately 5.5 degrees of varus intraoperatively. A surgeon can use this as a restriction of the tibial varus cut up to 6 degrees without the requirement for expensive assistive technologies.

Varus placement of the tibial component of Oxford unicompartmental knee arthroplasty decreases the risk of postoperative tibial fracture.

AIMS: A fracture of the medial tibial plateau is a serious complication of Oxford mobile-bearing unicompartmental knee arthroplasty (OUKA). The risk of these fractures is reportedly lower when using components with a longer keel-cortex distance (KCDs). The aim of this study was to examine how slight varus placement of the tibial component might affect the KCDs, and the rate of tibial plateau fracture, in a clinical setting. METHODS: This retrospective study included 255 patients who underwent 305 OUKAs with cementless tibial components. There were 52 males and 203 females. Their mean age was 73.1 years (47 to 91), and the mean follow-up was 1.9 years (1.0 to 2.0). In 217 knees in 187 patients in the conventional group, tibial cuts were made orthogonally to the tibial axis. The varus group included 88 knees in 68 patients, and tibial cuts were made slightly varus using a new osteotomy guide. Anterior and posterior KCDs and the origins of fracture lines were assessed using 3D CT scans one week postoperatively. The KCDs and rate of fracture were compared between the two groups. RESULTS: Medial tibial fractures occurred after surgery in 15 patients (15 OUKAs) in the conventional group, but only one patient (one OUKA) had a tibial fracture after surgery in the varus group. This difference was significant (6.9% vs 1.1%; p = 0.029). The mean posterior KCD was significantly shorter in the conventional group (5.0 mm (SD 1.7)) than in the varus group (6.1 mm (SD 2.1); p = 0.002). CONCLUSION: In OUKA, the distance between the keel and posterior tibial cortex was longer in our patients with slight varus alignment of the tibial component, which seems to decrease the risk of postoperative tibial fracture.Cite this article: Bone Joint J 2022;104-B(10):1118-1125.

P21 deficiency exhibits delayed endochondral ossification during fracture healing.

INTRODUCTION: Endochondral ossification is a complex biological phenomenon involving a variety of factors and cells. Cyclin-dependent kinase inhibitor 1 (p21) inhibits cell cycle progression and is affected by external stress. We recently reported that embryonic endochondral ossification is unaffected by endogenous p21 deficiency. In this study, we evaluated whether p21 expression affects endochondral ossification during fracture healing. METHODS: Tibial fractures were introduced into p21 knockout (p21-/-) (n = 24) and wild-type C57BL/6 (p21+/+) (n = 24) mice at age 10 weeks. Fracture healing was evaluated using radiological, histological, and immunohistochemical (IHC) analyses. The effect of p21 small interfering RNA (siRNA) on ATDC5 cells was assessed in vitro. RESULTS: The Allen score for fracture healing was lower in p21-/- mice than in p21+/+ mice. In addition, p21-/- mice exhibited larger calluses and lower bone mineral density. IHC analyses showed that p21-/- mice exhibited delayed endochondral ossification via the Ihh-Runx2-Osterix pathway in vivo. Down-regulation of p21 expression in ATDC5 cells delayed endochondral ossification in vitro. CONCLUSIONS: p21 deficiency leads to delayed endochondral ossification by attenuating the Ihh-Runx2-Osterix pathway in vivo, and p21 deficiency in hypertrophic chondrocytes causes delayed differentiation of hypertrophic chondrocytes in vitro. p21 plays a role in endochondral ossification during fracture healing.

A Novel Model of Hip Femoroacetabular Impingement in Immature Rabbits Reproduces the Distinctive Head-Neck Cam Deformity.

BACKGROUND: Femoroacetabular impingement (FAI) is a leading cause of hip pain in young adults and often leads to degenerative osteoarthritis (OA). A small animal model of hip deformities is crucial for unraveling the pathophysiology of hip OA secondary to FAI. PURPOSES: To (1) characterize a new minimally invasive surgical technique to create a proximal femoral head-neck deformity in a skeletally immature rabbit model and (2) document the effect of an injury to the medial proximal femoral epiphysis on head-neck morphology at 28 days after the injury. STUDY DESIGN: Controlled laboratory study. METHODS: Six-week-old New Zealand White rabbits (n = 10) were subjected to right hip surgery, with the left hip used as a control. An epiphyseal injury in the medial femoral head was created using a 1.6-mm drill. Hips were harvested bilaterally at 28 days after surgery. Alpha and epiphyseal shaft angles were measured on radiographs. Alpha angles at the 1- and 3-o'clock positions were measured on the oblique axial plane of micro-computed tomography images. Bone bar formation secondary to growth plate injuries was confirmed using alcian blue hematoxylin staining. RESULTS: All hips in the study group showed a varus-type head-neck deformity, with lower epiphyseal shaft angles on anteroposterior radiographs versus those in the control group (133°± 8° vs 142°± 5°, respectively; P = .022) and higher epiphyseal shaft angles on lateral radiographs (27°± 12° vs 10°± 7°, respectively; P < .001). The mean alpha angles in the study group were higher at both the 1- (103°± 14° vs 46°± 7°, respectively; P < .002) and 3-o'clock (99°± 18° vs 35°± 11°, respectively; P < .002) positions than those in the control group. Alcian blue hematoxylin staining of all hips in the study group indicated that the injured physis developed a bony bar, leading to growth plate arrest on the medial femoral head. CONCLUSION: The proposed model led to growth arrest at the proximal femoral physis, resulting in a femoral head-neck deformity similar to human FAI. CLINICAL RELEVANCE: Our novel small animal model of a femoral head-neck deformity is a potential platform for research into the basic mechanisms of FAI disease progression and the development of disease-modifying therapies.

Peri-prosthetic bone remodeling of hydroxyapatite-coated compaction short stem was not affected by stem alignment.

BACKGROUND: To improve implant survival through accelerated early bone remodeling during total hip arthroplasty (THA), hydroxyapatite (HA) is widely used as a bioactive coating, which is believed to enhance initial fixation by osseointegration. We aimed to investigate the relationship between stem insertion alignment and postoperative bone mineral density (BMD) changes in patients with full hydroxyapatite-coated (HA) compaction short stem and short tapered-wedge stem. METHODS: This retrospective cohort study enrolled 115 consecutive patients (115 joints) undergoing THA using the full HA compaction short (n = 59) and short tapered-wedge (n = 56) stems. Stem alignment, including anteversion, valgus, and anterior tilt were measured by a three-dimensional template using computed tomography data. Post-operative peri-prosthetic BMD was measured by dual-energy X-ray absorptiometry. The relationship between stem alignment and BMD changes in the stems was analyzed. RESULTS: Patterns of peri-prosthetic BMD changes were similar in both groups. Stem insertion alignments of anteversion, valgus, and anterior tilt were different between the two stem types. Stem alignment of valgus and anterior tilt did not affect peri-prosthetic BMD in either of the stem type. An absolute anteversion difference between stem anteversion and original canal anteversion caused significant peri-prosthetic BMD loss in Gruen zones one and seven in the tapered-wedge stem. However, stem alignment of absolute anteversion difference did not affect BMD changes in the HA compaction stem. CONCLUSIONS: Peri-prosthetic bone remodeling remained unaffected by stem alignment after THA with the new short full HA compaction stem.

Anterior acetabular coverage and femoral head-neck measurements predict postoperative anterior impingement: A simulation study.

The aim of this simulation study was to evaluate the relationship of elements of anterior acetabular coverage and femoral head-neck shape with the occurrence of postoperative anterior impingement after curved periacetabular osteotomy (PAO). Sixty-two patients with symptomatic developmental dysplasia of the hip who had undergone curved PAO were selected. The likelihood of developing postoperative anterior impingement was explored through simulations of the range of motion by collision detection of the pelvis and femur. Postoperative anterior impingement was defined as impingement that occurred during postoperative bone flexion <105° or postoperative internal rotation <20° at 90° flexion. The three-dimensional center-edge (CE) angles, acetabular and femoral versions, radiographic alpha angles of the femoral head, combination angles of anterior CE and alpha angles, and combined anteversions of acetabular and femoral versions were compared between patients with postoperative anterior impingement and nonimpingement. A receiver operator characteristic (ROC) analysis was conducted to determine thresholds of the examined radiographic parameters and calculate their accuracy for predicting postoperative anterior impingement. A multivariate analysis was performed to test whether combined anteversion, anterior CE angle, and combination angle are associated with excellent modified Harris Hip Scores (mHHSs). ROC analysis demonstrated a combination angle ≥108° was predictive of the occurrence of postoperative anterior impingement after curved PAO, which can lead to impaired clinical outcomes. Conversely, a combination angle <108° was significantly associated with mHHS ≥ 90 points. To avoid postoperative anterior impingement, osteochondroplasty of the femoral head or anterior CE angle control should be performed for patients with preoperative combination angles ≥90°.