Increased Purinergic Signaling in Human Dental Pulps With Inflammatory Pain is Sex-Dependent.

An enhanced understanding of neurotransmitter systems contributing to pain transmission aids in drug development, while the identification of biological variables like age and sex helps in the development of personalized pain management and effective clinical trial design. This study identified enhanced expression of purinergic signaling components specifically in painful inflammation, with levels increased more in women as compared to men. Inflammatory dental pain is common and potentially debilitating; as inflammation of the dental pulp can occur with or without pain, it provides a powerful model to examine distinct pain pathways in humans. In control tissues, P2X3 and P2X2 receptors colocalized with PGP9.5-positive nerves. Expression of the ecto-nucleotidase NTPDase1 (CD39) increased with exposure to extracellular adenosine triphosphate (ATP), implying CD39 acted as a marker for sustained elevation of extracellular ATP. Both immunohistochemistry and immunoblots showed P2X2, P2X3, and CD39 increased in symptomatic pulpitis, suggesting receptors and the ATP agonist were elevated in patients with increased pain. The increased expression of P2X3 and CD39 was more frequently observed in women than men. In summary, this study identifies CD39 as a marker for chronic elevation of extracellular ATP in fixed human tissue. It supports a role for increased purinergic signaling in humans with inflammatory dental pain and suggests the contribution of purines shows sexual dimorphism. This highlights the potential for P2X antagonists to treat pain in humans and stresses the need to consider sex in clinical trials that target pain and purinergic pathways. PERSPECTIVE: This article demonstrates an elevation of ATP-marker CD39 and of ATP receptors P2X2 and P2X3 with inflammatory pain and suggests the rise is greater in women. This highlights the potential for P2X antagonists to treat pain and stresses the consideration of sexual dimorphism in studies of purines and pain.

The Influence of Cone Beam Computed Tomography-Derived 3D-Printed Models on Endodontic Microsurgical Treatment Planning and Confidence of the Operator.

INTRODUCTION: Currently, there are no studies evaluating the impact of 3-dimensional (3D) printed models on endodontic surgical treatment planning. The aims of this study were: 1) to determine if 3D models could influence treatment planning; and 2) to assess the effect of 3D supported planning on operator confidence. MATERIALS: Endodontic practitioners (n = 25) were asked to analyze a preselected cone beam computed tomography (CBCT) scan of an endodontic surgical case and answer a questionnaire that elucidated their surgical approach. After 30 days, the same participants were asked to analyze the same CBCT scan. Additionally, participants were asked to study and to perform a mock osteotomy on a 3D printed model. The participants responded to the same questionnaire along with a new set of questions. Responses were statistically analyzed using chi square test followed by either logistic or ordered regression analysis. Adjustment for multiple comparison analysis was done using a Bonferroni correction. Statistical significance was set at ≤0.005. RESULTS: The availability of both the 3D printed model and the CBCT scan resulted in statistically significant differences in the participants' responses to their ability to detect bone landmarks, predict the location of osteotomy, and to determine the following: size of osteotomy, angle of instrumentation, involvement of critical structures in flap reflection and involvement of vital structures during curettage. In addition, the participants' confidence in performing surgery was found to be significantly higher. CONCLUSIONS: The availability of 3D printed models did not alter the participants' surgical approach but it significantly improved their confidence for endodontic microsurgery.

XP-endo Finisher effectively reduces hard-tissue debris accumulated in root canals with isthmus after preparation with a reciprocating file system.

This study compared the accumulated hard-tissue debris (AHTD) after preparation with WaveOne Gold (WOG) to XP-endo Shaper (XPS), without and with a supplementary step using XP-endo Finisher (XPF) using clinically applicable irrigation. Twenty-four mesial roots with two canals and single foramen were micro-CT-scanned and matched. Scans were also taken after preparation with WOG or XPS, and after XPF. Irrigation with 2.5% NaOCl (total: 17 ml per canal) and 17% EDTA (2.5 ml per canal) was performed using a 30ga Max-I-Probe needle placed up to the working length. Morphological parameters were calculated and compared within and among groups. XPF significantly reduced unprepared area within XPS and WOG groups, and AHTD within WOG (p < 0.05). There were no significant differences between WOG and XPS after preparation and after XPF (p > 0.05). In conclusion, WOG and XPS produced a similar volume of AHTD, but the supplementary step with XPF decreased the AHTD in the WOG group.

Possible Causes for Failure of Endodontic Surgery - A Retrospective Series of 20 Resurgery Cases.

OBJECTIVE: This study aimed to evaluate unsuccessful endodontic surgery cases for possible causes for treatment failure and evaluate if a nonsurgical retreatment (NSRTX) approach could have been a better alternative to resurgery. METHODS: Analyses of clinical and cone-beam computed tomography (CBCT) images, periapical radiographs, and chart documentation determined study parameters. Preoperative factors were age, sex, tooth type, signs and/or symptoms, presence of periapical radiolucency, previous root canal treatment, timeline since previous endodontic surgery, presence of posts, cores, and restorations. The intra-operative factors were microsurgical classification, previous techniques, and current techniques utilized. Postoperative factors were signs and/or symptoms, time to follow-up, and healing status. The accessibility of the root canal system and the quality of the existing root filling were used to evaluate NSRTX as an alternative to resurgery. RESULTS: A total of 1073 surgical cases from 2011-2019 were reviewed. In 14 patients, 20 cases matched the inclusion criteria and allowed for data extraction. The mean time since the previous surgery was 2.9+-2.1 years, with a mean follow-up of 9.1+-5.8 months after the resurgery. Possible reasons for failure identified were: insufficient root-end filling (leaking, off-axis preparation, lack of depth, overfill) n=12/20, 60.0%; missed anatomy (main and lateral canals, isthmus) n=9/20, 45.0%; incomplete resection n=6/20, 30.0%. In 18/20 cases (90.0%), resurgery appeared to be indicated for 2/20 cases (10.0%). Therefore, NSRTX may have been a potential alternative. CONCLUSION: Further evidence for possible causes of failure of endodontic surgery was provided, which were primarily iatrogenic. The evaluation of CBCT and high magnification intra-operative images proved beneficial for identifying critical issues for all investigated cases.

Effect of sodium hypochlorite on conventional and heat-treated nickel-titanium endodontic rotary instruments - An in vitro study.

BACKGROUND/PURPOSE: Sodium hypochlorite (NaOCl) is a highly alkaline solution which exhibits antimicrobial properties. However, it causes corrosion to endodontic rotary files. This study investigated the effect of NaOCl on the metal surface of five different unused endodontic rotary files in vitro. MATERIALS AND METHODS: Two non-heat-treated nickel-titanium (NiTi) files, ProTaper, BioRace, and three heat-treated NiTi files, VortexBlue, TRUShape, and EdgeFile X7 files, were immersed in 4% NaOCl for 5, 10, and 20 min, and 1, 6 and 24 h. The corrosion susceptibility was evaluated by visual inspection and scanning electron microscopy (SEM). RESULTS: In the TRUShape group, the black particulate matter was mostly formed at the file's curvature and shaft. A large amount of precipitate accumulated in the EdgeFile group. The extent and prevalence of surface defects were found to be consistently higher in EdgeFile X7 instruments than in any other instruments. EdgeFile X7 and TRUShape files exhibited a greater corrosive tendency to NaOCl than BioRace, ProTaper, and VortexBlue not only under visual inspection, but also under SEM analysis after prolonged immersion (1, 6, 24 h) in 4% NaOCl. However, shorter immersion periods (5, 10, 20 min) showed little surface corrosion across all experimental groups. CONCLUSION: Within the limitations of this study, EdgeFile X7 and TRUShape files exhibit greater corrosive tendencies to NaOCl in vitro than BioRace, ProTaper, and VortexBlue files after prolonged immersion in 4% NaOCl. However, shorter immersion periods, which more closely approximate clinical conditions during single root canal therapy, may not show surface corrosion across all experimental groups.

The Role of Interleukin 6 in Osteogenic and Neurogenic Differentiation Potentials of Dental Pulp Stem Cells.

INTRODUCTION: Studies have shown that there is a significantly higher concentration of interleukin 6 (IL-6) in inflamed pulp tissues compared with healthy pulp tissues. The aims of this study were to investigate the baseline differences between mesenchymal stem cells (MSCs) isolated from healthy human dental pulp stem cells (H-DPSCs) and inflamed dental pulp stem cells (I-DPSCs) and their correlation to IL-6 and to determine whether IL-6 can affect the differentiation potentials of these cells. METHODS: MSCs isolated from healthy and inflamed pulp tissues were cultured and characterized in vitro. The levels of secreted IL-6 in the culture supernatants from H-DPSCs and I-DPSCs were measured by enzyme-linked immunosorbent assay. IL-6 and neutralizing IL-6 were added to H-DPSCs and I-DPSCs, respectively. Immunofluorescence staining, alizarin red staining, and Western blotting were performed to assess the differentiation potentials of H-DPSCs and I-DPSCs. The independent unpaired 2-tailed Student's t-test was performed after quantification analysis. RESULTS: H-DPSCs and I-DPSCs showed a similar expression of MSC-associated markers including CD44, CD73, CD90, and CD105, whereas H-DPSCs showed a lower level of IL-6, lower osteogenic differentiation potentials, and higher neurogenic differentiation potentials compared with I-DPSCs. The addition of IL-6 to H-DPSCs increased osteogenic potentials and decreased neurogenic potentials, whereas the neutralization of IL-6 for I-DPSCs led to decreased osteogenic potentials and increased neurogenic potentials. CONCLUSIONS: The findings of this study indicated IL-6 has the capacity to enhance osteogenesis while hindering neurogenesis of DPSCs.

Outcome of Endodontic Surgery: A Meta-analysis of the Literature-Part 3: Comparison of Endodontic Microsurgical Techniques with 2 Different Root-end Filling Materials.

INTRODUCTION: The aim of the present study was to investigate the influence of root-end preparation and filling material on endodontic surgery outcome. A systematic review and meta-analysis was conducted to determine the outcome of resin-based endodontic surgery (RES, the use of high-magnification preparation of a shallow and concave root-end cavity and bonded resin-based root-end filling material) versus endodontic microsurgery (EMS, the use of high-magnification ultrasonic root-end preparation and root-end filling with SuperEBA [Keystone Industries, Gibbstown, NJ], IRM [Dentsply Sirona, York, PA], mineral trioxide aggregate [MTA], or other calcium silicate cements). METHODS: An exhaustive literature search was conducted to identify prognostic studies on the outcome of root-end surgery. Human studies conducted from 1966 to the end of December 2016 in 5 different languages (ie, English, French, German, Italian, and Spanish) were searched in 4 electronic databases (ie, Medline, Embase, PubMed, and Cochrane Library). Relevant review articles on the subject were scrutinized for cross-references. In addition, 5 dental and medical journals (Journal of Endodontics; International Endodontic Journal; Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontics; Journal of Oral and Maxillofacial Surgery; and International Journal of Oral and Maxillofacial Surgery) were hand checked dating back to 1975. All abstracts were screened by 3 independent reviewers (H.B., M.K., and F.S.). Strict inclusion-exclusion criteria were defined to identify relevant articles. Raw data were extracted from the full-text review of these selected articles independently by each of the 3 reviewers. In case of disagreement, an agreement was reached by discussion, and qualifying articles were assigned to group RES. For EMS, the same search strategy was performed for the time frame October 2009 to December 2016, whereas up to October 2009 the data were obtained from a previous systematic review with identical criteria and search strategy. Weighted pooled success rates and a relative risk assessment between RES and EMS were calculated. To make a comparison between groups, a random effects model was used. RESULTS: Sixty-eight articles were eligible for full-text review. Of these, per strict inclusion exclusion criteria, 14 studies qualified, 3 for RES (n = 862) and 11 for EMS (n = 915). Weighted pooled success rates for RES were 82.20% (95% confidence interval [CI], 0.7965-0.8476) and 94.42% for EMS (95% CI, 0.9295-0.9590). This difference was statistically significant (P < .0005). CONCLUSIONS: The probability for success for EMS proved to be significantly greater than the probability for success for RES, providing best available evidence on the influence of cavity preparation with ultrasonic tips and/or SuperEBA (Keystone Industries, Gibbstown, NJ), IRM (Dentsply Sirona, York, PA), MTA, or silicate cements as root-end filling material instead of a shallow cavity preparation and placement of a resin-based material. Additional large-scale randomized clinical trials are needed to assess other predictors of outcome.

Computer-aided Design/Computer-aided Manufacturing-guided Endodontic Surgery: Guided Osteotomy and Apex Localization in a Mandibular Molar with a Thick Buccal Bone Plate.

A mandibular molar with a thick buccal bone plate is a challenging problem in endodontic surgery despite the increase in the success rate of endodontic surgery nowadays. This report describes the application of a surgical template to guide osteotomy and facilitate apex localization in a mandibular molar with a thick buccal bone plate. A 57-year-old woman visited the authors' clinic for pain in tooth 19 and was diagnosed with symptomatic apical periodontitis in this previously treated tooth. Nonsurgical retreatment was performed; however, 2 years later, the patient reported pain in the same tooth. A periapical lesion was confirmed using cone-beam computed tomographic (CBCT) imaging, and endodontic surgery on the mesial root of tooth 19 was planned. After CBCT imaging and cast scan data were transferred to implant surgical planning software, the data were superimposed. In the superimposed model, an anchor pin was designed to target the mesial root apex of tooth 19. The surgical template was then printed using a 3-dimensional printer. Endodontic microsurgery included application of this printed surgical template. A computer-aided design/computer-aided manufacturing (CAD/CAM)-guided surgical template minimized the extent of osteotomy and enabled precise targeting of the apex in this case. There were no postoperative complications. A CAD/CAM-guided surgical template is useful in endodontic surgery for complicated cases.

Methodological Quality Assessment of Meta-analyses in Endodontics.

INTRODUCTION: The objectives of this review were to assess the methodological quality of published meta-analyses related to endodontics using the assessment of multiple systematic reviews (AMSTAR) tool and to provide a follow-up to previously published reviews. METHODS: Three electronic databases were searched for eligible studies according to the inclusion and exclusion criteria: Embase via Ovid, The Cochrane Library, and Scopus. The electronic search was amended by a hand search of 6 dental journals (International Endodontic Journal; Journal of Endodontics; Australian Endodontic Journal; Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology; Endodontics and Dental Traumatology; and Journal of Dental Research). The searches were conducted to include articles published after July 2009, and the deadline for inclusion of the meta-analyses was November 30, 2016. The AMSTAR assessment tool was used to evaluate the methodological quality of all included studies. RESULTS: A total of 36 reports of meta-analyses were included. The overall quality of the meta-analyses reports was found to be medium, with an estimated mean overall AMSTAR score of 7.25 (95% confidence interval, 6.59-7.90). The most poorly assessed areas were providing an a priori design, the assessment of the status of publication, and publication bias. CONCLUSIONS: In recent publications in the field of endodontics, the overall quality of the reported meta-analyses is medium according to AMSTAR.

Long-term Evaluation of Treatment Planning Decisions for Nonhealing Endodontic Cases by Different Groups of Practitioners.

INTRODUCTION: The aim of this study was to investigate changes in treatment planning decisions among different practitioner groups over 7 years for teeth with apical periodontitis and a history of endodontic treatment. METHODS: A Web-based survey was sent to dentists in Pennsylvania in 2009 consisting of 14 cases with nonhealing periapical lesions and intact restorations without evidence of recurrent caries. Participants selected among 5 treatment options: wait and observe, nonsurgical retreatment (NSRTX), surgical retreatment (SRTX), extraction and fixed partial denture, or extraction and implant (EXIMP). In 2016, the identical survey was resent to the original 2009 participants. RESULTS: In 2009, 262 dentists participated in the survey. Two hundred one participants were general practitioners (GPs: 76.7%), 26 endodontists (ENDOs: 9.9%), and 35 other specialists (prosthodontics, periodontics, and oral surgery [SPECs]: 13.4%) (n = 262). EXIMP, NSRTX, and SRTX were fairly equally selected but with great variation between practitioner groups (χ2 = 173.49, P < .05). A subset group of 104 participants (SUB) (39.7% of the original participants) retook the survey in 2016 (69 GPs [66.3%], 15 ENDOs [14.0%], and 20 SPECs [19.7%]). Comparisons among practitioner groups were significantly different in SUB (n = 104) for 2009 (χ2 = 95.536, P < .05) and 2016 (χ2 = 109.8889, P < .05). Intragroup reliability between 2009 and 2016 revealed no significant differences between the overall treatment planning choices for all practitioners (GPs, ENDOs, or SPECs). Intrapractitioner reliability showed many treatment planning decision changes on an individual level. Chances that individuals changed their original decision were 47.8% (95% confidence interval, 45.2%-50.4%) and were significantly different among the 3 practitioner groups (GPs > SPECs > ENDOs [χ2 = 11.2792, P < .05]). No significant changes were observed in the decision for tooth saving versus replacement treatment options (P = .520). CONCLUSIONS: No significant differences were noted between current and past treatment planning decisions in regard to tooth preservation by endodontic retreatment versus tooth extraction and replacement. However, individual practitioners lacked consistency in their decision making over time.

Healing after root-end microsurgery by using mineral trioxide aggregate and a new calcium silicate-based bioceramic material as root-end filling materials in dogs.

INTRODUCTION: The purpose of this study was to compare healing after root-end surgery by using grey mineral trioxide aggregate (MTA) and EndoSequence Root Repair Material (RRM) as root-end filling material in an animal model. METHODS: Apical periodontitis was induced in 55 mandibular premolars of 4 healthy beagle dogs. After 6 weeks, root-end surgeries were performed by using modern microsurgical techniques. Two different root-end filling materials were used, grey MTA and RRM. Six months after surgery, healing of the periapical area was assessed by periapical radiographs, cone-beam computed tomography (CBCT), micro computed tomography (CT), and histology. RESULTS: Minimal or no inflammatory response was observed in the majority of periapical areas regardless of the material. The degree of inflammatory infiltration and cortical plate healing were not significantly different between the 2 materials. However, a significantly greater root-end surface area was covered by cementum-like, periodontal ligament-like tissue, and bone in RRM group than in MTA group. When evaluating with periapical radiographs, complete healing rate in RRM and MTA groups was 92.6% and 75%, respectively, and the difference was not statistically significant (P = .073). However, on CBCT and micro CT images, RRM group demonstrated significantly superior healing on the resected root-end surface and in the periapical area (P = .000 to .027). CONCLUSIONS: Like MTA, RRM is a biocompatible material with good sealing ability. However, in this animal model RRM achieved a better tissue healing response adjacent to the resected root-end surface histologically. The superior healing tendency associated with RRM could be detected by CBCT and micro CT but not periapical radiography.

A comparison of dimensional standard of several nickel-titanium rotary files.

OBJECTIVES: The aim of this study was to compare the dimensional standard of several nickel-titanium (Ni-Ti) rotary files and verify the size conformity. MATERIALS AND METHODS: ProFile (Dentsply Maillefer), RaCe (FKG Dentaire), and TF file (SybronEndo) #25 with a 0.04 and 0.06 taper were investigated, with 10 in each group for a total of 60 files. Digital images of Ni-Ti files were captured under light microscope (SZX16, Olympus) at 32×. Taper and diameter at D1 to D16 of each files were calculated digitally with AnalySIS TS Materials (OLYMPUS Soft Imaging Solutions). Differences in taper, the diameter of each level (D1 to D16) at 1 mm interval from (ANSI/ADA) specification No. 101 were statistically analyzed using one-way ANOVA and Scheffe's post-hoc test at 95% confidence level. RESULTS: TF was the only group not conform to the nominal taper in both tapers (p < 0.05). All groups except 0.06 taper ProFile showed significant difference from the nominal diameter (p < 0.05). CONCLUSIONS: Actual size of Ni-Ti file, especially TF, was different from the manufacturer's statements.

Nano-sized 58S bioactive glass enhances proliferation and osteogenic genes expression of osteoblast-like cells.

OBJECTIVE: To observe the effects of ionic dissolution products on nano-sized 58S bioactive glass (nano-58S) on proliferation and specific osteogenic genes expression in MG-63 cells. METHODS: Ionic dissolution products were prepared by incubating nano-58S or sol-gel bioactive glass 58S (58S) particulates in Dulbecco's modified Eagle's medium (DMEM) at 1% w/v for 24 hr and filtrated through 0.22 µm filters to remove the particulates. MG-63 cells were cultured in the nano-58S extraction, 58S extraction, and DMEM, respectively, for different time periods to assay the proliferation, mRNA expression of alkaline phosphatase (ALP), Cbfa1, Collagen type I (Col-I) and osteocalcin (OCN), as well as ALP staining, activity and matrix mineralisation. RESULTS: In the nano-58S group, cell proliferation and mRNA expression of ALP, Cbfa1 and OCN were significantly enhanced in a time-dependent manner compared with the control group. mRNA expression of Cbfa1 on day 4 and OCN on day 7 was significantly higher than that in the 58S group. Moreover, there was significantly more ALP protein expression and mineralisation in the nano-58S group than in the 58S group. CONCLUSION: The nano-58S enhanced proliferation, osteogenic markers expression in MG-63 cells and induced stronger mineralization than 58S.

Outcome of endodontic surgery: a meta-analysis of the literature--Part 2: Comparison of endodontic microsurgical techniques with and without the use of higher magnification.

INTRODUCTION: The aim of this study was to investigate the outcome of root-end surgery. It identifies the effect of the surgical operating microscope or the endoscope on the prognosis of endodontic surgery. The specific outcomes of contemporary root-end surgery techniques with microinstruments but only loupes or no visualization aids (contemporary root-end surgery [CRS]) were compared with endodontic microsurgery using the same instruments and materials but with high-power magnification as provided by the surgical operating microscope or the endoscope (endodontic microsurgery [EMS]). The probabilities of success for a comparison of the 2 techniques were determined by means of a meta-analysis and systematic review of the literature. The influence of the tooth type on the outcome was investigated. METHODS: A comprehensive literature search for longitudinal studies on the outcome of root-end surgery was conducted. Three electronic databases (ie, Medline, Embase, and PubMed) were searched to identify human studies from 1966 up to October 2009 in 5 different languages (ie, English, French, German, Italian, and Spanish). Review articles and relevant articles were searched for cross-references. In addition, 5 dental and medical journals (ie, Journal of Endodontics, International Endodontic Journal, Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontics, Journal of Oral and Maxillofacial Surgery, and International Journal of Oral and Maxillofacial Surgery) dating back to 1975 were hand searched. Following predefined inclusion and exclusion criteria, all articles were screened by 3 independent reviewers (S.B.S., M.R.K., and F.C.S.). Relevant articles were obtained in full-text form, and raw data were extracted independently by each reviewer. After agreement among the reviewers, articles that qualified were assigned to group CRS. Articles belonging to group EMS had already been obtained for part 1 of this meta-analysis. Weighted pooled success rates and a relative risk assessment between CRS and EMS overall as well as for molars, premolars, and anteriors were calculated. A random-effects model was used for a comparison between the groups. RESULTS: One hundred one articles were identified and obtained for final analysis. In total, 14 studies qualified according to the inclusion and exclusion criteria, 2 being represented in both groups (7 for CRS [n = 610] and 9 for EMS [n = 699]). Weighted pooled success rates calculated from extracted raw data showed an 88% positive outcome for CRS (95% confidence interval, 0.8455-0.9164) and 94% for EMS (95% confidence interval, 0.8889-0.9816). This difference was statistically significant (P < .0005). Relative risk ratio analysis showed that the probability of success for EMS was 1.07 times the probability of success for CRS. Seven studies provided information on the individual tooth type (4 for CRS [n = 457] and 3 for EMS [n = 222]). The difference in probability of success between the groups was statistically significant for molars (n = 193, P = .011). No significant difference was found for the premolar or anterior group (premolar [n = 169], P = .404; anterior [n = 277], P = .715). CONCLUSIONS: The probability for success for EMS proved to be significantly greater than the probability for success for CRS, providing best available evidence on the influence of high-power magnification rendered by the dental operating microscope or the endoscope. Large-scale randomized clinical trials for statistically valid conclusions for current endodontic questions are needed to make informed decisions for clinical practice.

Outcome of endodontic surgery: a meta-analysis of the literature--part 1: Comparison of traditional root-end surgery and endodontic microsurgery.

INTRODUCTION: The aim of this study was to investigate the outcome of root-end surgery. The specific outcome of traditional root-end surgery (TRS) versus endodontic microsurgery (EMS) and the probability of success for comparison of the 2 techniques were determined by means of meta-analysis and systematic review of the literature. METHODS: An intensive search of the literature was conducted to identify longitudinal studies evaluating the outcome of root-end surgery. Three electronic databases (Medline, Embase, and PubMed) were searched to identify human studies from 1966 to October 2009 in 5 different languages (English, French, German, Italian, and Spanish). Relevant articles and review papers were searched for cross-references. Five pertinent journals (Journal of Endodontics, International Endodontic Journal, Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontics, Journal of Oral and Maxillofacial Surgery, International Journal of Oral and Maxillofacial Surgery) were individually searched back to 1975. Three independent reviewers (S.S., M.K., and F.S.) assessed the abstracts of all articles that were found according to predefined inclusion and exclusion criteria. Relevant articles were acquired in full-text form, and raw data were extracted independently by each reviewer. Qualifying papers were assigned to group TRS or group EMS. Weighted pooled success rates and relative risk assessment between TRS and EMS were calculated. A comparison between the groups was made by using a random effects model. RESULTS: Ninety-eight articles were identified and obtained for final analysis. In total, 21 studies qualified (12 for TRS [n = 925] and 9 for EMS [n = 699]) according to the inclusion and exclusion criteria. Weighted pooled success rates calculated from extracted raw data showed 59% positive outcome for TRS (95% confidence interval, 0.55-0.6308) and 94% for EMS (95% confidence interval, 0.8889-0.9816). This difference was statistically significant (P < .0005). The relative risk ratio showed that the probability of success for EMS was 1.58 times the probability of success for TRS. CONCLUSIONS: The use of microsurgical techniques is superior in achieving predictably high success rates for root-end surgery when compared with traditional techniques.

An in vitro comparison of Profile GT and GTX nickel-titanium rotary instruments in apical transportation and length control in mandibular molar.

INTRODUCTION: Profile GT files have been redesigned and are now marketed as GTX nickel-titanium rotary files. METHODS: A double-digital radiographic technique was used to compare apical transportation (AT) and change in working length (CWL) between Profile GT and GTX rotary files. Mesiobuccal canals of 40 extracted mandibular molars were instrumented by either rotary system. The central axes of preoperative (15 K) and master apical rotary file (30/.04) were digitally superimposed. AutoCAD was used to measure AT at 0, 1, and 3 mm from WL. The distance from the file tip to the set WL indicated any CWL. Analysis of variance test showed no significant differences between groups in AT. RESULTS: CWL in GTX (-0.25 +/- 0.42) group was significantly greater than in Profile GT group (0.17 +/- 0.30). CONCLUSIONS: The AT results indicate that the newly designed GTX rotary instruments are as effective as the older Profile GT instruments.

Microscopic periradicular surgery: perioperative predictors for postoperative clinical outcomes and quality of life assessment.

The authors report on data from a self-assessment questionnaire filled out by 199 patients undergoing periradicular microscopic surgery at two private endodontic offices and at graduate endodontic clinics of the University of Pennsylvania. Regression analysis was performed using pain and swelling as dependent variables and age, sex, type of teeth, location, periapical lesion, and remedication as independent variables. Pain and swelling were significantly related to females and younger patients (p < 0.05). The results supported Etodolac as a pre- and postoperative analgesic and use of antibiotics restricted to high-risk patients. Maximum pain and swelling were reported at night and day 1 of the surgery, respectively. Generally, swelling was more often reported than pain. Surgeries in anterior maxilla were related to more pain and swelling. A majority of the patients (67%) rated surgical endodontics more pleasant than expected and found it less painful (46%) or the same (38%) as nonsurgical treatment. The results also point out that patients in general have negative beliefs and limited knowledge about periradicular surgery.

Conventional and surgical endodontic retreatment of a maxillary first molar: unusual anatomy.

The prognosis for endodontic treatment in teeth exhibiting a complex anatomy is unfavorable if clinicians fail to recognize extra root canals. This case demonstrates the presence of a second canal in the disto-buccal root of a maxillary right first molar. Conventional retreatment followed by endodontic surgery was performed and a 1-year postoperative radiograph shows apparent periapical healing.

Effect of modified Hedstrom files on instrumentation area produced by ProFile instruments in oval canals.

OBJECTIVE: To study the effect of a modified Hedstrom file called IqFile on the instrumentation shape of oval canals prepared with ProFile instruments. STUDY DESIGN: Fifty extracted premolars were divided into 3 groups of 16 teeth each. Group 1 was subjected to ProFile 0.04 rotary instrumentation to a size 6. Group 2 followed the same technique, but also received buccolingual hand instrumentation with IqFiles to ISO size 70. Group 3 was instrumented similarly to group 2 but unmodified Hedstrom files were used. Teeth were sectioned at 1 and 3 mm from working length and photographed at 26x magnification. AutoCAD was used for measuring the percentage of instrumented area of the canal. RESULTS: ANOVA revealed that Group 2 was significantly better than Groups 1 (P=.00) and 3 (P=.00) at the 1 mm level. At the 3 mm level Group 2 was significantly better than Group 1 (P=.03), but no differences were found between Groups 2 and 3 (P=.15). CONCLUSION: The combination of ProFile and IqFile was found more effective in instrumenting oval canals at both the 1 and the 3 mm levels. However, at the 3 mm level no difference was detected between the use of IqFiles and the use of unmodified Hedstrom files.